Added Transaction- Not working!

Hi,
Can some one figure this out:
1. I added a new transaction to VL_Complete to the role ZX_DECRA_KU_COST_ACCOUNTING.
This new role is not working. Can you please suggest solutions ?
Thanks

User not authorised for this transaction. I solved it ..did nothing but once again added the TCODE!!

Similar Messages

ME21n transaction not working in IDES

Hi All,
ME21n transaction not working in IDES. when i try to enter a purchase order and display the header data its giving dump.
thanks,
Poonam

when i enter the transaction and press enter its giving dump. how will i debug?
i am getting this dump:
Short text
    Inconsistency in the Dictionary for the structure "WB2_MSEG".
What happened?
    Error in the SAP kernel.
    The current ABAP "SAPLWB2B_HANDLE_WORKAREA" program had to be terminated
     because the
    ABAP processor detected an internal system error.
Edited by: Poonam Naik on Mar 10, 2009 4:43 AM

SPROXY transaction not working

Hi,
We are facing a problem while executing transaction SPROXY.
since a recent patch implementation at SAP-HR Box. Basically, the test tool for sproxy transaction is resulting into dump. Furthermore report "SPRX_INBOUND_TEST" has been deleted from system as well.
Can anybody sugggest what acould be the possible reason and probable solution for it.
Regards,
Sanjib Basu

Hi,
After adding the patch, it will be never expected but try to reset the SPROXY configuration.
Execute report SPROX_CHECK_IFR_ADDRESS
and try to see the Communication test report in SE 38
Press SPROX* and run it it will give trace the exact problem
Refer
SPROXY not working:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83deb90-0201-0010-189c-8d3ff87572f8
Thanks
Swarup
Edited by: Swarup Sawant on Feb 20, 2008 7:38 PM

F-47 transaction not working in ME2DP T.code

Hi All,
I have created a created PO for down payment request. When go to transaction ME2DP and enter the PO and hit enter I will go next screen from where I can create down payment request or I can do down payment. When I select the PO and click on create button to create down payment request I am able to go to F-47 screen but unable to create down payment request.
Please let me know any configuration settings or any SAP note needs to be implemented
Thanks & Regards,
Chand

if downpayment works fine with F-47 then that means issue is with ME2DP report.
have you checked above two points:
----Prerequisites
Down payment data has been recorded at header or item level in the purchase order.
You have specified at least one due date or period as a parameter for down payments.----
i do not have access to ME2DP so could not explore more but found a relevant OSS note, have a look at that also
Note 1610785 - ME2DP/FPDP_START: Various problems
Note 1404413 - PO number cleared in down payments transaction ME2DP (for both OSS note take help of a technical guy to see if relevant things are in place)
one more thing - is this PO for a country(like US) where tax juridcition is there? if yes, then ME2DP will not work
yogesh
Edited by: Yogesh Lohiya on Jan 26, 2012 7:40 PM
Edited by: Yogesh Lohiya on Jan 26, 2012 7:42 PM

LQ02 Transaction not work in Back ground processing

Hi
LQ02 transaction working well in forground process but not working for background process. I did the bdc and use call transaction to post WM-IM transaction.
screen input as follows :
Warehouse number
Storage type
Storage bin
WM movement type
Storage Unit
batch job shows sucessfully completed but category stock status remain unchanged (ie quality to unrestricted.)
Any body know the alternative function module or bapi to post LQ02 transaction.
Appriciate your help.
Best regards
Pravin

when you run LQ02 in foreground, do you select anything manually or can you just hit save an everything is done?
What does job log and spool file tell you?
Did you flag the box for create mail in case of an error?
check OSS note 489286

Declarative transaction not working for oracle 10g as.

Hi Friends,
While migrating from sun app server to oracle 10g as, i have problem in declarative transactions.
I created stateless and stateful beans with declarative transactions. Transactions were working fine till they were in sun app server environment, but they fail in oracle 10g as environment.
I build the ear through sun IDE and deployed the ear on oracle 10g as. Things worked fine till transactions come onto picture.Declarative transaction get failed in case of oracle 10g as.
Please if you have faced such problem or have any way to solve this problem, Pls revert back.
rgds,
m_khanduri

sb92075 thank you for reply. Please see the command outputs.
$ hostname
LONDAN
$ id
uid=503(oaprod) gid=5002(dba) groups=5002(dba)
$ uname -a
Linux LONDAN 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
$ ps -ef | grep -i pmon | grep -v grep
oaprod    3810     1 0 May11 ?        00:02:24 ora_pmon_OID
jgarry thank u also. please see the response.
$ ls -rl $ORACLE_HOME/dbs
total 2848
-rw-rw---- 1 oaprod dba    3584 May 8 14:33 spfileOID.ora
-rw-r----- 1 oaprod dba 2867200 Sep 10 10:17 snapcf_OID.f
-rwSr----- 1 oaprod dba    1536 May 5 06:17 orapwOID
-rw-rw---- 1 oaprod dba      24 May 11 17:24 lkOID
-rw------- 1 oaprod dba    8385 May 5 05:18 init.ora
-rw------- 1 oaprod dba   12920 May 5 05:18 initdw.ora
-rw-rw---- 1 oaprod dba    1544 May 11 17:24 hc_OID.dat
ok. previously I set TNS_ADMIN. Now I set TWO_TASK, while connecting now am getting different error "insufficient privilege". Please check following.
$ export TWO_TASK=OID
$sqlplus / as sysdba
SQL*Plus: Release 10.1.0.5.0 - Production on Wed Sep 11 05:22:28 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
But, now while connecting with "sys", I don't need to supply "@OID" it's connecting directly with "sqlplus sys as sysdba" command.

Adding memoty not working

Upgrading 4gb for my 6gb
PC3-10600 (DDR3-1333)
Memory is not working
PC3-8500 (DDR3-1066) Four DDR3 DIMM (240-pin) sockets

Hi lorenzo74,
Welcome to the HP Forums!
I see that you have upgraded your memory without success on your desktop computer, and I would be happy to guide you towards a resolution! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
What version of Windows do you have installed on your computer?
What is the name of the original RAM installed in your desktop?
When you installed this new hardware, did you ground yourself before installing it?
If you need to, you can refer to this document on Upgrading Memory (RAM) for further inquiries on memory use, limitations and installation recommendations.
Please re-post with the results of your troubleshooting and the requested information. I look forward to your reply!
Cheers
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Added Font Not Working

Hi, I am new here. I just purchased a font (Boycot) and added it to my "fonts" folder. It works great in MS Word, but doesn't seem to work in Photoshop. I have CS2 and I'm using a PC. When I select the text tool and then the "Boycot" font, I see only blank spaces (if that) and then I get an error message. The two messeges are: "Could not complete your request because something prevented the text engine from being initialised." or "Could not complete your request because of a program error." Other font's work fine and as I said... the "Boycot" font works in other programs like MS Word.
Thanks!

Derrick111 wrote:
It shows up in the dropdown list, but it is the ONLY font that doesn't show an "sample" next to it. Could the font be incompadible with win2K?
How do I do the adobefnt*.lst files process?
Win2K?
Now he tells us! You do realise it's now Year 2000+9 don't you?
Anyway, do a normal OS search for Adobefnt*.lst (that's .LST!) and delete all instances.

Adding credit not working

Hi Guys
Keep trying to add credit to our account and it flicks me here:
https://www.dropbox.com/s/qrja0as7zkn5quw/Screenshot%202014-03-28%2014.30.22.png
I am the account admin so when I request it it sends me an email and redirects me back to this page - stuck in a loop!
Please help
Thanks
Simon

Hi Scott,
It's weird that it shows that the subscription did not complete since I used it (and got charged) for two months before the problems started.
I did purchase a new subscription today and so far it works, but I tried adding another credit card just to check and it gave me the same error as last time:
"invalid card, please check card details". I noticed there's no field to write down the card's security number, so maybe that's the problem.
Can you check it for me? I also can't delete my previous credit card information (i.e. the one that stopped working and led to this cancellation).
My main concern right now is the cancelling fee, I can't check if I got charged and it doesn't feel right to pay for a system's mistake. I'm mistrusting Creative Cloud right now and a bit afraid of this happening again next month.

OB52 AND OB08 transactions not working in QAS

Hi All,
My client is upgrading from 4.7 to ECC 6.0
Due to not modifiable status two transaction could't be done in the new QUALITY System.
This is IMG activity under the following.
1. OB52 :- Open and Close Posting periods (FA -> FA Global Setting -> Document ->Posting -> Open and Close Postinfg periods
2. OB08 :- Enter Foriegn exchange rate. (Gen Settings) Enter foriegn exchange rate
These transaction are to be executed regularly and directly in the 4.7 but in the present new ECC6.0 system the same is not possible due to non modifiable status. Now for testing in the new system we have to execute the same directly.
Please suggest

Hello,
As your ABAPer to change the V_T001B in SOBJ transaction to Automatically Adjustable and the category would be CUST (client specific)
Hope this will resolve this issue.
Regards,
Ravi

After new installing Solman 4.0 , the DSWP transaction not work

hi gurut there,
We did two new installing of solman 4.0 ( SQL Server database), after installing ,start up SAP and other post-install steps... it seems ready,then I start to setup RFC with satellite systems ,and added server ,database,logical components,but when I goto trans DSWP to set up nenw solution : I wrote the new solution name,and choose the language (EN), then click to continue , but it just stay and not continue...anything wrong about this,how can I configure this problem issue.
the same problem also in our another installation.
Waiting for your kind help !
Wei

Thank you all , I　ｉｍｐｌｅｍｅｎｔ　ｔｈｅ　ｎｏｔｅ　１００８７１７　，ｉｔ　ｉｓ　ｗｏｒｋ　ｎｏｗ．
ｔｈａｎｋ　ｙｏｕ　ａｇａｉｎ　！
ｂｅｓｔ　ｒｅｇａｒｄｓ，
Ｗｅｉ

Container Managed Transactions not working

 We are using weblogic5.1 and mssql2000. We are using jts to get connections to the dbase connection pool.
 I have a stateless session ejb with a method called "createUserProfile". This method is deployed with a descriptor indicating container managed with a setting of "Required" on this method:
 here's the relevant part of the descriptor.......
 - <assembly-descriptor>
 - <container-transaction>
 - <method>
 <ejb-name>com.nps.csi.profile.ejb.ProfileSession</ejb-name>
 <method-intf>Remote</method-intf>
 <method-name>createUserProfile</method-name>
 </method>
 <trans-attribute>Required</trans-attribute>
 </container-transaction>
 </assembly-descriptor>
 This method does multiple create() calls on various entity beans and I want it to roll back should any exception occur during on any bean processed in this method.
 The remote interface signature for the method looks as follows:
 public void createUserProfile(ProfileBean signUp)
 throws RemoteException, CreateProfileException;
 I have a try/catch block around most of the code in this method which catches "Exception". If an Exception occurs it then re-throws my custom exception, CreateProfileException.
 Problem: the transaction is not rolling back when an Exception occurs. I did a sql trace on the output and it appears that there is an "implicit" transaction being set and commits are occuring after I do a create on an entity bean, even though no commits are being issued by the entity beans (or any other code). This "implicit" transaction is being turned on and off, seemingly independent of the container.
 Has anyone encountered this? What am I doing wrong?
 Thanks,
 Traci


 We are using weblogic5.1 and mssql2000. We are using jts to get connections to the dbase connection pool.
 I have a stateless session ejb with a method called "createUserProfile". This method is deployed with a descriptor indicating container managed with a setting of "Required" on this method:
 here's the relevant part of the descriptor.......
 - <assembly-descriptor>
 - <container-transaction>
 - <method>
 <ejb-name>com.nps.csi.profile.ejb.ProfileSession</ejb-name>
 <method-intf>Remote</method-intf>
 <method-name>createUserProfile</method-name>
 </method>
 <trans-attribute>Required</trans-attribute>
 </container-transaction>
 </assembly-descriptor>
 This method does multiple create() calls on various entity beans and I want it to roll back should any exception occur during on any bean processed in this method.
 The remote interface signature for the method looks as follows:
 public void createUserProfile(ProfileBean signUp)
 throws RemoteException, CreateProfileException;
 I have a try/catch block around most of the code in this method which catches "Exception". If an Exception occurs it then re-throws my custom exception, CreateProfileException.
 Problem: the transaction is not rolling back when an Exception occurs. I did a sql trace on the output and it appears that there is an "implicit" transaction being set and commits are occuring after I do a create on an entity bean, even though no commits are being issued by the entity beans (or any other code). This "implicit" transaction is being turned on and off, seemingly independent of the container.
 Has anyone encountered this? What am I doing wrong?
 Thanks,
 Traci

Urgent:Transaction not working.

Hi all,
I have developed a report program.The report has a selection screen.It displays the report in ALV grid using "REUSEALVGRID" function.The program runs successfully from ABAP editor.But when i created a transaction for the program and tried to run the same using the created transaction code,the program returns to
SAP easy access screen after the selection screen display.
I tried in debugging mode,The program does not enter the
START-OF-SELECTION event block.
It is urgent.Can anyone throw more light into this problem.
Thanks,
G.Jayaprakash

Hi,
I think I may have discovered the problem. In SE93 when you define the transaction code, you must create it as a report transaction. ( choose the option Program and Selection Screen (report transaction) ).
I suspect that you would have defined it as a dialog transaction ( the Program and Screen (dialog transaction) option ) and given the screen number as 1000.
Hope I have identified the problem correctly.
Regards,
Anand Mandalika.

IOS In App Purchases restore transactions not working properly with Milkman Games ANE for Adobe AIR

I am experiencing the following problems with Milkman Games in-app-purchases ANE dor Adobe AIR:
PROBLEM 1
0) StoreKit is created and correctly returns all the product IDs via StoreKit.storeKit.loadProductDetails()
1) I purchase item A, the item is correctly purchased
2) I purchase item B, the item is correctly purchased
3) I uninstall and re-install the app
4) I restore transactions via StoreKit.storeKit.restoreTransactions()
5) Only item B is restored ( onPurchaseSuccess() is only triggered once for item B)
EXPECTED BEHAVIOUR: I would expect that restoreTransactions() would trigger onPurchaseSuccess() for each of the items previously restored.
PROBLEM 2
6) I close the app
7) When I restart the app, onPurchaseSuccess() for product B is fired without any of the app code calling it.
Is StoreKit attempting to restore transactions by default everytime StoreKit is created? (i.e. StoreKit.create(); )
Testing device: iPad2, iPhone4
Operating System: iOS 7 and iOS 6
Compiling for: AIR 3.8
Type of item purchased: all items tested are non-consumable
Did anyone ever experienced such a behaviour with iOS in-app-purchases in an AIR mobile app? Any ideas or pointer in the right direction are appreciated, thanks!

Shared Objects aren't working for me after the last update Adobe Flash Pro 13.1.0.217 and Air 3.9.0.1380. After exporting to the iPad the apps I get an erro when using Flush command:
Error: Error #2130: Unable to flush SharedObject.
          at Error$/throwError()
          at flash.net::SharedObject/flush()
          at CleverClimbers_fla::MainTimeline/frame1()[MyFile_fla.MainTimeline::fr ame1:133]
          at CleverClimbers_fla::MainTimeline/frame1()
Cannot display source code at this location.
Debug session terminated.
Any ideas for this?

Added vlan not working

I am still using a 6509. I am trying to add a new vlan, but I can't even ping the router ip on that vlan from the router. I have configured it the same as my other vlans that work just fine. I am wondering if I have crossed some limit. I have my vlans setup as 1,100,200,300,400,500,600,700,800,900. Up not vlan 800 works just fine. VLAN 900 doesn't. I can't figure out what the problem is. Below is my vlan configuration. Anything you see wrong?
interface Vlan900
ip address 192.168.104.252 255.255.255.0
ip helper-address 192.168.37.61
no ip redirects
ip pim sparse-dense-mode
standby 90 ip 192.168.104.254
standby 90 priority 105
standby 90 preempt

I assume 'show vlan' displays vlan 900? i.e. you issued command 'vlan 900' on the 6509? with the 6509 owning the gateway for vlan 900 it will need vlan 900 in the vlan db. If you have an access port in vlan 900 on the 6509 - maybe put portfast on the port for testing - it should come up. Maybe add it to a trunk to a downstream switch as well..?

Added Transaction- Not working!

Similar Messages

Maybe you are looking for