[Addin API] Problem with setting Common data in ProjectSettings

I'm experimenting with how to store information in a project and trying out the "ProjectSettings.jpr" example coming with the AddinAPI samples.
In the sample, data set in "Common" settings doesn't work (while data set in "Configuration" settings works).
To reproduce the problem,
1. Compile and install the ProjectSettings plugin
2. Restart JDev
3. Go to Project | Project Settings
4. Type in some data under Common/"My Properties" and
Type in some data under Configuration/Development/"My CFG Properties"
5. Click OK
6. Go to Project | Project Settings again
7. Now, data entered under Common/"My Properties" is lost but data under
Configuration/Development/"My CFG Properties" retains.
I figured out the problem is that inside CommonProjectSettingsPanel.onEntry(TraversableContext tc), tc.find(ConfigProjectSettings.KEY) returns null, meaning the setting object is not found in the context.
I'm using JDev 9.0.2.829.
Is this a known bug in 9.0.2's Addin API?
Thanks.

Besides, I found out that if I changed the value of the key ConfigProjectSettings.KEY from "MyConfig.PrjSettings" to "samples.oracle.addin.projectsettings.ConfigProjectSettings" (which is same as the classname), it doesn't work anymore.
Is there any restriction (e.g. number of dots, length, etc.) on the keys used in project settings?

Similar Messages

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

How can I debug a problem with the 3g data connection on my iPhone 4s?

This question didn't get any answers in the "Using iPhone" forum. Thought I would re-ask here. Note, I had to reset the network again today 2 days after the last reset:
I've been having intermittent problems with my 3g data connection on my iPhone 4s on ATT. Whenever this happens I see full bars etc, but can't browse from safari or get any data in other apps. My wife's iPhone 4 right next to me has no issues at all. Switching on/off airplane mode and turning off/on Cellular Data does not help. The only thing that helps is resetting the Network Settings or hard restarting the phone.
I figured my problems were hardware related so I took my phone in for a replacement the other day. Things started out fine but after I upgraded it to 5.01 and restored my backup and now I am back to having the same issue today. I assume the issue is with something coming from my backup / restore but is there any way for me to pinpoint what could be causing the issue. I have a lot of apps, I'd rather not have to reinstall and set them all backup manually, but I would if I knew that would fix the problem... but for all I know one of the apps could be causing it.
Anyone have any logs I can check or testing I can do on my end?
Thanks!

Unfortunately, Apple does not make any logs available to the average schmoe (like us) for networking, kernel dumps, or anything else (assuming, of course, it is not jailbroken).
Your best bet is to take it back into the store. Ask them to look at the notes in GCRM regarding the last time this occured, then explain after upgrading to 5.01 it is occuring again. Then ask them for a phone swap since it is a reoccuring issue and doesn't sound like an OS/SW issue. Good luck!

Problem with setting Source Level in Sun Studio 2

I've got problem with setting Source Level to 1.5 in Sun Studio 2. When I try to set it to 1.5 in Project properties and click Ok everything seem to go well, but when I open Project Properties again Source Level is set to 1.4. I need this to work cause I started to lear Java recently and I want to use foreach loop.
Please help

I'm just citing an example using Date().
In fact, whether I use DateFormat or Calendar, it shows the same result.
When I set the date to 1 Jan 1950 0 hours 0 minutes 0 seconds,
jdk1.4.2 will always return me 1 Jan 1950 0 hours 10 minutes 0 seconds.
It works correctly under jdk1.3.1

Sql Devloper 4.0.0.13 - problems with displaying user data types

Hi,
I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
The problem persist in table view, script output and exported files.
My type is described as follows:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
when make select column from table that contains this type I get next results:
CASE 1:
SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
Select:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result:
        ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
END CASE 1;
CASE 2:
SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
Select1:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result1:
ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)
But if I select one element it is displayed normal.
Select2:
select id, a.adresalokacija.opcina
from dptr_saglasnosti a
where id = 1;
Result2:
ID ADRESALOKACIJA.OPCINA
         1 TRAVNIK
END CASE 2;
I have tried this scenario on three different pc with same output.
Pleas help me to get rid of the '???' in result.
Best Regards,
Omer

I tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
all data can show,No ??? in result
Test step as following:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
CREATE TABLE dptr_saglasnosti (
adresalokacija        DPTY_ADRESA,
id    number);
INSERT INTO dptr_saglasnosti VALUES (
DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
select id, adresalokacija from dptr_saglasnosti where id = 1;
ID ADRESALOKACIJA
1    HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta')

[svn:fx-trunk] 8968: sync api versions with flash runtime data

Revision: 8968
Author:   [email protected]
Date:     2009-07-31 13:18:19 -0700 (Fri, 31 Jul 2009)
Log Message:
sync api versions with flash runtime data
Modified Paths:
    flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/avmplus/ActionBlockEmitter.j ava
    flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/APIVersions.java

Sorry to dig this out, but i just ran exactly into the same problem using a 7600GT. Reverting the appropriate libraries to 9.2.4 lead to a segfault in Compiz, deleting the libvdpau_nouveau files, however worked perfectly - thanks cro for the hint. But I guess, this is not a permanent solution, is there a better way to fix it? Maybe a bug report mentioning the problem would be of some use?
Bug reported: https://bugs.archlinux.org/task/39975
Last edited by PhotonX (2014-04-20 11:59:36)

Problem with SET GET parameters

Hi all,
I am facing a problem using SET and GET parameters.
There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
SET PARAMETER ID 'QLS' FIELD lv_prueflos.
Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
Example: Inspection Lots : 4100000234
4100000235
4100000236
Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
Could you pls help me in solving this issue.
Thanks,
Aravind

Hi,
Problem with SET GET parameters
Regarding on your query. Follow this below link.
It will help you.
Re: Problem with Set parameter ID
Re: Problem in Set parameter ID
I Hope it will helps to you.
Regards,
Sekhar

Button in Bex Analyser 7.0 - problem with setting up Static Parameters

Hello,
I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
This is what I do - in Static Parameters of my Button I set the following values:
Name                          Index          Value
DATA_PROVIDER        0               DP_1
CMD                             0               PROCESS_VARIABLES
SUBCMD                      0               VAR_SUBMIT
VAR_NAME                 0               0RMA_FIP
VAR_VALUE               0               004/2010
As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
I have already seen the following two threads and SAP notes on passing variable values from the button:
Re: Button in BEx Analyzer 7.0
Re: How to set variables values via VBA.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Can anyone please advise?
Cheers,
AL

I managed to figure it out myself!
Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
I will mark this thread as "answered".

Problems with setting up my ISP's mail server in Windows Live Mail and Thunderbird

The laptop is a G60-535DX with Windows 7 64 bit. I've managed to setup my gmail account fine in Live Mail, but when setting up my ISP' mail server, it doesn't work. I get the message that the information was entered correctly, and I see the 'connecting' at the bottom of the page, and then 'error', and clicking on it shows a socket error #10061. In Thunderbird, I get a timeout error message. I've entered all the incoming and outgoing server information correctly, (I've done this over 8-9 times now), the ports are the defaults(110,25), no SSL, no authentication. I've talked with my ISP several times. Just a couple of hours ago was the last time. Their only other possibilities were that Live Mail had problems with setting up more than one account, that Live Mail needed updating, that Windows 7 was a new operating system and there were 'kinks'. I removed the gmail account, set up the ISP's mail by itself; didn't help. I checked for Live Mail updates, but found out that they all come from Windows updates(which are current). The folks on PCQ&A inform me that they have 3 or 4 accounts with Live Mail. I can get my mail, by logging onto my ISP's website, but that' kind of a nuisance. I posted this in Seven Forums and they didn't have any ideas. As I said, I also can't get my mail server to work in Thunderbird, either. I don't know what else to try. (short of activating the recovery partition and starting from scratch). Any ideas would be more that welcome.
Thanks,
Steve

Stevehiker wrote:
Nevermind, it's fixed. One of the guys on PCQ&A suggested going to my ISP's website to see if they had a support page. They did and it stated that under certain circumstances that for the login ID the whole email address should be entered. For XP and Outlook Express one only uses the first part of the email address (your name); so just for grins I entered the whole address, name and all and everyting worked. Called my ISP and was told that that wasn't the way it's supposed to work. Well----
Thanks anyway,
Steve
Mine works the same way_must enter full email address as login. AT&T?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Problem with displaying chart data

Hello everybody,
I have problem with displaying chart data correctly. I'm using a cartesian chart with DateTimeAxis. The stockdata I'm using is for half a year and
with ticks for every day. The problem is, that Flex displays the data of february in march together with the data of march. I have added a picture
to show the result. The second column of the grid is for february and the third for march.
Could anybody help me with this problem. Thanks in advance.
Thomas

Hi Chris,
thanks for your reply. Here you get the source code:
The following method creates the LineChart:
        public function init():void
            model.upperChart = this;
            model.upperChartStyle.setChartViewStyle(this);
            this.hAxis = new MyDateTimeAxis();
            model.upperChartData.configureHAxis(this.hAxis);
            this.vAxis = new LinearAxis();
            model.upperChartData.configureVAxis(this.vAxis);
            this.vAxisTitle = new Label();
            this.vAxisTitle.text = model.upperChartData.getVAxisTitle();
            model.upperChartStyle.setVAxisTitleLabelStyle(this.vAxisTitle);
            this.vAxisTitle.x = 10
            this.vAxisTitle.y = 0;
            this.addChild(this.vAxisTitle);
            this.myChart = new CartesianChart();
            //remove default datatip
            this.myChart.showDataTips = false;
            this.myChart.x = 10;
            this.myChart.y = 0;
            this.myChart.width = 768;
            this.myChart.height = 196;
            model.upperChartStyle.setChartStyle(this.myChart);
            this.addChild(this.myChart);
            //Remove line shadow
            this.myChart.seriesFilters = null;
            this.myChart.horizontalAxis = this.hAxis;
            this.myChart.verticalAxis = this.vAxis;
            this.hAxisRenderer = new AxisRenderer();
            model.upperChartData.configureHAxisRenderer(this.hAxisRenderer);
            this.hAxisRenderer.axis = this.hAxis;
            model.upperChartStyle.setHAxisRendererStyle(this.hAxisRenderer);
            this.myChart.horizontalAxisRenderers.push(this.hAxisRenderer);
            this.vAxisRenderer = new AxisRenderer();
            model.upperChartData.configureVAxisRenderer(this.vAxisRenderer);
            this.vAxisRenderer.axis = this.vAxis;
            model.upperChartStyle.setVAxisRendererStyle(this.vAxisRenderer);
            this.myChart.verticalAxisRenderers.push(this.vAxisRenderer);
            model.upperChartStyle.setVAxisDataLabelStyle(this.vAxisMinLabel);
            this.addChild(this.vAxisMinLabel);
            model.upperChartStyle.setSeriesStyle(model.upperChartData.series, model.upperChartData.shares);
            this.myChart.dataProvider = model.upperChartData.dataProvider;
            this.myChart.series = model.upperChartData.series;
The data for dataprovider and series you can see in attached file dataprovider.xml.
xfield is equivalent to timestamp
yfield is equivalent to absolute
I think the problem could be the configuration of the datetimeaxis. The following method shows the parameter for the datetimeaxis:
        public function configureHAxis(axis:MyDateTimeAxis):void
            axis.parseFunction = UtilityClass.parseYYYYMMDDHHNNSSString2Date;
            axis.dataUnits = "days";
            axis.dataInterval = 1;
            axis.title = "";
            axis.minimum = new Date(UtilityClass.parseYYYYMMDDHHNNSSString2Date("2009-01-07 00:00:00").time);
            axis.maximum = new Date(UtilityClass.parseYYYYMMDDHHNNSSString2Date("2009-07-06 00:00:00").time);
And finally you get the function, that I'm using for string to date conversion:
        public static function parseYYYYMMDDHHNNSSString2Date(input:String):Date
            var result:Date = new Date();
            var year:Number = Number(input.substring(0,4));
            var month:Number = Number(input.substring(5,7));
            var date:Number = Number(input.substring(8,10));
            var hours:Number = Number(input.substring(11,13));
            var minutes:Number = Number(input.substring(14,16));
            var seconds:Number = Number(input.substring(17,19));
            result.setUTCFullYear(year);
            result.setUTCMonth(month-1);
            result.setUTCDate(date);
            result.setUTCHours(hours);
            result.setUTCMinutes(minutes);
            result.setUTCSeconds(seconds);
            return result;
I hope that will help to locate the reason for the wrong chart visualization.
Thanks for any help.

Obiee 11g . problem with set default as columnname in interaction tab

Hi Obiee gurus ,
I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new analysis with same name . it takes set default option for that column.
can Please give some suggestion for this problem.
regards
Srinivas

Hi Srinivas,
i guess this will be same for 11G
Refer
http://blogs.oracle.com/siebelessentials//2008/08/remove_systemwide_default_sett.html
thanks,
Saichand.v

Problem with setting Item level permissions lists

Hello!
I have SPS 2013 on-premised environment with AD authentication.
At some moment I've noticed that we have a problem with setting the item level permissions on any lists except the document libraries.
When I click the "shared with" button I see a popup form with a list of users who have an access to that list but there is no "invite people" link or "Advanced" link. Moreover, the "loading" ring rotates
instanly like some operation was'nt ended.
The same operation with documents in libraries works well.
I am be grateful for any help!

Hi Mischael,
From your description, my understanding is that there were no "invite people" or "Advanced" link when some users clicked "shared with" button in some lists.
This issue seems like about permissions. Please log on your site with site collection administrator or a user who has full control for the site, then go to a problematic list->List settings->Permissions for this list, check whether the list
has unique permissions. Then click "Check Permissions", check the permission level for the problematic users and then go to Site Settings->Site permissions->Permission levels, check whether the permission level contains "Manage permissions".
If not, add the permission into the permission level.
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

Think you need to provide some more details about what you are connecting

When I try and restore from iCloud it says problem with back up data help !!!

Can anyone help me back up my phone from iCloud. It is saying there is a problem with my data

Hey Shopaholic1181,
Thanks for using Apple Support Communities.
iCloud: Understanding alert messages when restoring from an iCloud Backup
http://support.apple.com/kb/TS4585
"Your iPhone cannot be restored because there is a problem with your backup data. Choose a different backup to restore from."
Your backup does not appear to be usable. If you receive this alert, you should check the iCloud System Status at the iCloud Support website to make sure there are not any issues occurring with iCloud Backup. If there is not a widespread issue notated on the iCloud System Status, the error may self-resolve if you wait several minutes and try again. If issues persist, you should contact iCloud Support via the iCloud Support website.
Have a nice day,
Mario

Problem with setting date using java 1.4.2

Is this a bug?
under java 1.4.2,
executing System.out.println(new java.util.Date("01-JAN-1950")) displays
Sun Jan 01 00:10:00 SGT 1950
but under java 1.3.1 the same statement displays as Sun Jan 01 00:00:00 SGT 1950 which is the desired result.

I'm just citing an example using Date().
In fact, whether I use DateFormat or Calendar, it shows the same result.
When I set the date to 1 Jan 1950 0 hours 0 minutes 0 seconds,
jdk1.4.2 will always return me 1 Jan 1950 0 hours 10 minutes 0 seconds.
It works correctly under jdk1.3.1

[Addin API] Problem with setting Common data in ProjectSettings

Similar Messages

Maybe you are looking for