Adding *67 to all outbound calls NOT in my contacts?

Sorry if this is a redundant question, I could not find an answer on a search...is there any way to either block caller ID, or automatically insert a *67 when calling numbers NOT in my contacts? Thanks.

I know I can do that, but would like to have some way to do it automatically. I use my phone for both personal and work, and customers I call are not in my contacts, so it would be extremely helpful to have a way that when I call a number that's not in my contacts, that it automatically inserts a *67, or some other way to blcok outbound caller ID. I think the blackbery can do it, I was just curious if the iPhone can...but it sounds like it's not an option.

Similar Messages

IPCC Express - Recording ALL outbound calls

Is it possible for the IPCC express server to keep a record of ALL outbound calls instead of just the ones the supervisor chooses? How?

Hi, guys.
Finally I've confugured my cheme.
I found my audio files .
I have added voice contact workflow to CAD-BE agent instead of CAD Agent. It was my mistake. When i do the same steps at CAD Agent - I saw raw files at C:\Programm Files\Cisco\Desktop_Audio folder.
But they all has *.RAW 1KB size. Is it correct ? I've talked over 1 min and only 1KB Any ideas ?

Outbound call not working for Common Area Phone

Hi,
I have configured Common area phone and i am not able to make the outbound call. I have grant the conference policy. I have grant the voice policy.
client policy is default
How to troubleshoot the issue with outbound calls?
INBOUND call is functioning fine
Thanks
jitender

You can change the dial plan with my tool :)
https://gallery.technet.microsoft.com/Lync-2013-Common-Area-57bc4ff1
But good call, normalization rules may be off due to default global dial plan.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Facetime outbound calls not connecting

Hi!
I am using facetime on my iPhone 4s and my iPad within a home network using an Apple Airport Express. When my friend calls in everything is working as expected. When I try to initiate an outbound call the same persons' iPad does not even ring. When I put my devices off the WiFi network and use the network of my mobile carrier instead, everything is working fine again (even the outbound calls). So I guess it might be a problem with either my Airport Express or the cable modem. Unfortunately I couldn't find any remedy on the net and I am somewhat stuck on how to resolve this issue. Did anybody experience the same? How could it be resolved?
Thanks for your input! Christian

Hi!
I am using facetime on my iPhone 4s and my iPad within a home network using an Apple Airport Express. When my friend calls in everything is working as expected. When I try to initiate an outbound call the same persons' iPad does not even ring. When I put my devices off the WiFi network and use the network of my mobile carrier instead, everything is working fine again (even the outbound calls). So I guess it might be a problem with either my Airport Express or the cable modem. Unfortunately I couldn't find any remedy on the net and I am somewhat stuck on how to resolve this issue. Did anybody experience the same? How could it be resolved?
Thanks for your input! Christian

Outbound calls not working

Hello,
We have a E1 R2 and outbound calls are not being established. Inbound calls are ok.
ios:c2951-universalk9-mz.SPA.152-4.M7.bin
Call Flow: IP Phone -> CUCM -> SIP TRUNK -> Voice Gateway -> E1 R2-> TELCO
The debug vpm signal is attached.
What could be the issue?
I have already tested this E1 R2 link in two differents routers.
Regards
Leonardo Santana

Hi Dennis,
I agree with you, this is strange.
The number dialed was 2217-8631 from extension 3784
E_HTSP_SETUP_REQ DNIS=22178631 ANI=3784
Jan 19 00:18:07.900: r2_reg_generate_digits(0/0/0:0(1)): Tx digit '3'
Jan 19 00:18:08.000: htsp_digit_ready_up(0/0/0:0(1)): Rx digit='1'
Jan 19 00:18:08.000: R2 Outgoing Voice(0/0): DSX (E1 0/0/0:0): STATE: R2_OUT_PROCESS_A R2 Got Event 1
Jan 19 00:18:08.000: r2_reg_generate_digits(0/0/0:0(1)): Tx digit '#'
Jan 19 00:18:08.120: htsp_digit_ready(0/0/0:0(1)): Rx digit='#'
Jan 19 00:18:08.120: R2 Outgoing Voice(0/0): DSX (E1 0/0/0:0): STATE: R2_OUT_PROCESS_A R2 Got Event R2_TONE_OFF
Jan 19 00:18:08.120: r2_reg_generate_digits(0/0/0:0(1)): Tx digit '1'
Jan 19 00:18:08.220: htsp_digit_ready_up(0/0/0:0(1)): Rx digit='1'
Jan 19 00:18:08.220: R2 Outgoing Voice(0/0): DSX (E1 0/0/0:0): STATE: R2_OUT_PROCESS_A R2 Got Event 1
Jan 19 00:18:08.220: r2_reg_generate_digits(0/0/0:0(1)): Tx digit '#'
Jan 19 00:18:08.340: htsp_digit_ready(0/0/0:0(1)): Rx digit='#'
Jan 19 00:18:08.340: R2 Outgoing Voice(0/0): DSX (E1 0/0/0:0): STATE: R2_OUT_PROCESS_A R2 Got Event R2_TONE_OFF
Jan 19 00:18:08.340: r2_reg_generate_digits(0/0/0:0(1)): Tx digit '*'
Jan 19 00:18:08.448: htsp_process_event: [0/0/0:0(1), R2_Q421_OG_SEIZE_ACK, E_DSP_SIG_1000]
Jan 19 00:18:08.448: r2_q421_seize_to(0/0/0:0(1)) Tx CLEAR FWDvnm_dsp_set_sig_state:[R2 Q.421 0/0/0:0(1)] set signal state = 0x8
Jan 19 00:18:08.448: htsp_timer - 1000 msec
Jan 19 00:18:08.448: r2_reg_channel_disconnected(0/0/0:0(1))

Outbound Numbers Not Showing in Supervisor Desktop

Running UCCX 7.0(1)SR05 with Supervisor Desktop 6.6(1). All outbound called numbers (whether internal 4-digit or external PSTN) are showing as <Unavailable> under "Agent Contact - Active Call" on the Supervisor Desktop. Anybody know what I have to change in CM or UCCX to have the called number appear? Inbound calling numbers appear fine.
Thanks,
Todd

Did you ever get a solution for this? - I have a customer with a similar issue.
Thanks

Not all my outbound calls g.711?

hi
have added a new region device pool etc to callmanager..have noticed on some of my new phones that some of the outbound calls show up as g.711 which is correct and other as g.729..not sure why this is as new gateway is in same device pool as new phones and callmanager is set to use g.711 within this region and g.729 to other regions..feel its something on the gateway or am i missing something

Sometimes some calls don't match any configured dial-peers and use default dial-peer. Default dial peer always uses g729.
Also, it is possible that remote phone configured for g729 region uses your gateway for outbound calls.
useful commands:
show voice call status - shows which dial-peers are matching.
show call active voice id - shows complete information about the call

Adding caller with name and number from call list to the contact list only inserts the number and not the name

I recently bought a BlackBerry Z10 and moved my cell service to Rogers to take advantage of the name display service offered by Rogers (Fido also offers this service).
Due to the number of calls that I receive from first time clients, I wanted the name display service to help me know who was calling. Evidently it is impossible to add clients to my contact list before they call me so I'm constantly seeing numbers that have no name to help me decide if I want to answer the call.
When I try to add a caller from my call list to my contact list, only the number gets inserted in the new contact. The name needs to be entered manually.
I understand and realize that not all call display formats are the same and that it's virtually impossible to parse the first and last names from the name portion of the caller id.
However, I would like to see BlackBerry add the functionality to insert the name portion of the call entry from the caller list to a "Nickname" entry in the contact list just like it adds the number to a "Home", "Mobile", or "Work" entry in the contact list.
If a user doesn't have a name display service, there would be no change to how their contacts are added because there is no name variable to copy over.
Can someone from BlackBerry please let me know if this feature can be added to BB10 and when it can be added? For me it's an obvious feature that should just work.
I am really enjoying my Z10 but I'm feeling let down that something so logical and helpful is not supported out of the box.
Regards,
Marc

Hey ViciousFerret,
It appears that you are not aware of the fact that both Rogers and Fido offer name AND number display service (although the name display feature is an add-on service) and have been offering it for many years (since 2006). Here is a link to the name display service description of each provider...
http://www.fido.ca/web/content/manageyourcalls/calldisplay&lang=en
http://www.rogers.com/business/on/en/smallbusiness/products/wireless/addons/valuepacks/
As you can see from the link below, Rogers and Fido have been offering this service since 2006.
http://www.businesswire.com/news/home/20060914005951/en/Teams-HP-Rogers-Wireless-Fido-Succeed-North
My BlackBerry Z10 shows both the name and number when someone calls (and the caller is not in my contact list).
All I would like is for the Z10 (and Q10) to support the addition of the name and number from the caller list to my contact list without me having to type the name. As I mentioned in my original post, to avoid the OS having to parse the first name and last name from the name portion of the caller list entry the name could simply be added to the contact list as a "Nickname". If your provider only has number display, nothing would have to be copied from the name variable in the caller list to the contact list.
I find it difficult to believe that BlackBerry would not be aware of this name display service since it's been around since 2006 with both Rogers and Fido.
I hope I have clarified the reasons why I would like to have this feature added to BB10 and how it's surprising that this simple feature is not already a part of the BB10 OS.
Either way, I don't think this is a difficult feature for the BlackBerry team to add. They're just copying a 2nd variable from the caller list to the contact list.
I'm surprised that Rogers hasn't asked BlackBerry to add this feature to their phones. I think it would be a popular feature for those who receive a high number of calls from first time callers.
How can I get this feature request to BlackBerry for their consideration?
Cheers,
Marc

HT4191 how do I not sync notes with my email? I have a business email on my iphone as well as his iphone. Now all of my notes are on his phone, and all of his notes are gone. We have never adjusted any settings, I only added the shared email account to hi

How do I not sync notes with my email? I have a business email on my iphone as well as my husbands iphone. Now all of my notes are on his phone, and all of his notes he previously has on his iphone are gone. We have never adjusted any settings or hooked it up to itunes, I only added the shared email account to his phone. Help???

Hi StoneLeadyFarms,
Thanks for visiting Apple Support Communities.
It sounds like notes on your devices may have synced when the email account was added, as described here:
iOS: Syncing Notes
http://support.apple.com/kb/HT4191
Notes are associated with an IMAP email account or iCloud account. To sync Notes, enable Notes for each account in Settings > Mail, Contacts, Calendars or Settings > iCloud.
You can stop syncing notes by tapping Settings > Mail, Contacts, Calendars or Settings > iCloud, tapping the email address that you added, and switching Notes to the off position.
Additionally, if your husband has backed up his iPhone to iTunes or iCloud, the steps in this article can help with recovering the lost notes from his device:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Best Regards,
Jeremy

Outlook 2010 show all users presence not just those you added to Jabber?

A customer has requested that in Outlook 2010 that Presence state is show for all users. Not just those that have been added to their Jabber for Windows 9.7.1 client.
Is there any way to do this?
J4W 9.7.1
IMP 10.0.1SU1

So for all users in consideration; kindly check if the proxy address field in AD is populated with the following format or not;
SIP:uid@sipproxydomainname ... ( this is also the IM address and please note prefixing with the word SIP: is really important).
Note this field will ensure whether you get the presence consistently or not. Refer to the following document for more information;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97_chapter_01.html#JABW_TK_E83CC0F0_00
Here is the section that you may want to refer to; "Enable Presence Integration with Microsoft Outlook"
Please rate if you find this helpfull.

I cannot beleive VZW does not have a way to black ALL international calls

My husband has been receiving harassing international call for well over a year. He answered the first few and there were a couple of girls laughing and speaking in a foreign language. He has not answered these calls since but they will not stop. Yesterday he received 33 calls from the same number. They use so many different numbers and area codes it is impossible to block them all. VZW of course wants him to change his number but it is a business number and they may be too costly to us. So yesterday I had to sign up for usage controls which is $5 a month/ $60 per year to try to stop them. I load in the max of 20 numbers allowed by VZ to block and this morning when we checked his phone the was a totally different number on the missed call list!
I cannot believe a company as technically advanced as VZ does not have a way to block ALL international calls.
Does anyone have any suggestions other than changing his number?

Assuming your content was purchased from the iTunes Store, go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time. You can see what content you can download here:
http://support.apple.com/kb/HT5085
You can also re-download content using an iOS device.
For full instructions, see:
http://support.apple.com/kb/ht2519
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Report of Outbound calls that were not answered

Hello
does anyone know if there is a report in UCCX that shows me the quantity of outbound calls that were not answered for a determined CSQ?
My UCCX version is 8.5.
Thank you
Marcos

Not specifically, In the Agent Detail Report or CSQ report it's the difference in "Calls Presented" and "Calls Handled".
CP - CH = unanswered
Mike

All songs are not adding to iTunes library

I recently organized the "My Music" folder with 7 subfolders containing approx. 4GBs each.
I also had a lot of dead links in iTunes and decided to do delete my current library and re-add everything.
It should be as simple as adding the "My Music" folder, *however all the songs were not added (most but not all).* What made me relize was when I added my iPod playlist and all songs could not be found. I searched the my music folder for "*.mp3" which returned approx 5200 files, but the iTunes library only has approx. 5000.
Is anyone else having this problem?
Any ideas on how to fix it?

What type of songs/videos are they?
Are any protected.
Open Quicktime and try to play the songs/videos. Do they play in Quicktime?
btabz

Why all my new notes doc are missing for some time after I added them.

This happens after I changed my iphone4 to iphone5.
All my old notes doc are still there, only those new ones that I've added will only stay for couple of days/wks in my iphone5 then will be gone.

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo.

Automatic navigation after "END" button depending on in- or outbound call

Hi all.
the requirement is:
In the case of inbound calls - the agent starts working on an item of the inbox and clicks on "END" when finished - the navigation should automatically bring him back to the inbox.
But if he starts with the account identification (outbound calls) then he should automatically jump back to account identification screen when clicking on "END".
I already got the Intent driven interaction working according to these steps. But now the navigation brings me ALWAYS back to the inbox.
1) Define a rule policy in the Rule Profile for context "Intent driven interaction":
If
Current Event Equals InteractionEnded-Interaction ended
Then
Navigate To ( Navigation Object type:Action = IC WebClient - Inbox:Display )
2) Release the rule using the "more" button and clicking on "relase draft rule" (the icon changes from yellow to green)
3) On the top level of my new policy I assigned my business role and the event that is being used (InteractionEnded).
4) I check business role customizing: function profile "INTENT_DRIVEN_INTERACTIONS" is assigned to "DEFAULT". Note: The intent driven profile "DEFAULT" is assigned to the service mgr. profile "IDI_DEFAULT".
Doing these changes my system now always jumps to the inbox when I click on the "END" button.
The problem seems to be that I am not able to figure out how to use the currentInboxItem as part of my rule policy.
I added a line in my rule for the currentInboxItem checking if the currentInboxItem is not-equal to "blank". This seems not to work. I guess I must rather check if currentinboxitem is "bound" or against a field of the item. But I don't see how to do this.
Has s.b. any idea how to get this work? Or on other ways how to get this work?
Does s.b. know how to debug when a rule is checked by the system?
Thanks & Regards,
Thorsten

Hi Paul,
I defined the execute method in the following way.
You can see below that lo_activity is defined in the following way:
lo_activity      TYPE REF TO if_bol_bo_property_access,
CURRENTINBOXITEM' is a standard object of the global data container which gets filled when an inbox item gets selected.
'ZCURRENTINBOXITM' is the repository object of the context ICRule and I fill the parameter for the process type.
Hope this helps.
Regards, Thorsten
METHOD if_crm_smf_service~execute.
fill attributes for currentinboxitem
see implementation example in class CL_CRM_IC_F_G_TRANS
DECLARATION -
DATA :
lv_string        TYPE        string,
lo_bdc           TYPE REF TO if_crm_ui_data_context,
lo_activity      TYPE REF TO if_bol_bo_property_access,
lo_fb            TYPE REF TO cl_crm_smf_fact_base,
lv_entity        TYPE REF TO cl_crm_bol_entity,
lv_rel           TYPE REF TO cl_crm_bol_entity,
lv_factbase      TYPE        string.
FIELD-SYMBOLS :
<lv_date> TYPE sydatum,
<lv_time> TYPE sytime.
CODE -
TRY.
      CALL METHOD super->if_crm_smf_service~execute
        EXPORTING
          session            = session
          service_properties = service_properties.
    CATCH cx_root.
ENDTRY.
lo_bdc = cl_crm_ui_data_context_srv=>get_instance( ).
get entity activities
lo_activity ?= lo_bdc->get_entity( 'CURRENTINBOXITEM' ).
prepare the nodes
lo_fb = session->get_factbase( ).
IF lo_activity IS BOUND.
    TRY.
      get only one order objects
        lv_string = lo_activity->get_property_as_string( iv_attr_name = 'CRM_GUID' ).
        lv_entity ?= lo_activity.
        lv_rel     = lv_entity->get_related_entity('BTOrderHeader').
      CATCH cx_root.
    ENDTRY.
    IF lv_rel IS BOUND.
      TRY.
          CLEAR lv_string.
        curr.inboxitem filled
          lv_string = 'X'.
          CALL METHOD me->set_fb_attr_by_id
            EXPORTING
              id    = 'ZCURRENTINBOXITM'
              value = lv_string.
        process_type
          CLEAR lv_string.
          lv_string = lv_rel->get_property_as_string( iv_attr_name = 'PROCESS_TYPE' ).
        create a child node and add the value
         lo_node1->set_attribute( attrib_name = 'BT_PROCESS_TYPE'
                                  attrib_value = lv_string ).
          CALL METHOD me->set_fb_attr_by_id
            EXPORTING
              id    = 'ZCII_PROC_TYPE'
              value = lv_string.
        CATCH cx_root.
      ENDTRY.
    ELSE.
      CLEAR lv_string.
        not filled
      lv_string = space.
      CALL METHOD me->set_fb_attr_by_id
        EXPORTING
          id    = 'ZCURRENTINBOXITM'
          value = lv_string.
    ENDIF.
get next BTOrderHeader
   lo_activity = bdc->activities->if_bol_bo_col~get_next( ).
ENDIF.
lv_factbase = lo_fb->get_factbase_as_string( ).
ENDMETHOD.

Adding *67 to all outbound calls NOT in my contacts?

Similar Messages

Maybe you are looking for