Adding a 2nd SharePoint 2013 Farm to the domain

hello.
in my production domain environment i have a SharePoint farm consisting on a single SQL server and a SharePoint server, sadly this has a few underlying issues, so in isolation i have built a new FARM and now want to migrate it into the production domain,
but i still want the other FARM operational for now so users can continue to use it. 
i need to configure some exchange integration, external web access and HTTPS for the new environment i just want to check that the farms wont interact with each other and its safe to do this?
the only issue i can see is that central admin has the same web URL on both farms, would it be best to change the URL via AAM on the new environment so not to cause a conflict? 
many thanks
Gordon

thank you
also the servers are an early version of the production system (originally built on a server with VM workstation and migrated to ESXI host thus they were left over in a functional state) i am using these because its significantly faster than building a whole
new farm from scratch, i have transferred the WSS_Content DB to it, its all work now but sadly share the same names and ip's as the production system. 
how can i change the server names and IP's on the new systems so not to break SharePoint.
many thanks
Gordon

Similar Messages

  • Replace FE and APP server in SharePoint 2013 farm

    Hello,
    We have to replace the front-end web and app server from a SharePoint 2013 farm.  The farm only has 1 FE, 1 APP and 1 SQL server.  As the FE and APP were wrongly patched and have unsupported software installed there's no way of getting all servers
    at same version level and to succesfully run the Product Configuration Wizard.  The database server is ok but we have to replace the 2 other servers.
    Is there any documented procedure to perform this migration/reinstall?
    Thanks!
    Martin

    for first approach.
    1- go to central admin and add all roles you need for the server that will stay
    2- log into the server you will remove then run configuration wizard and choose disconnect from farm
    you will have now one server, you can clean it up and keep it or later remove it when u have the new one
    3- to add new server
    https://technet.microsoft.com/en-us/library/cc261752.aspx
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

  • SQL Installation for SharePoint 2013 - Windows Firewall - Profile - domain, Public and Private - Which ones to choose?

    Hi there,
    I am setting up SQL Server (to be used in our SharePoint 2013 farm).
    The Firewall exception for SQL server gives me three choices in Profile section as 
    Domain, Public and Private profiles 
    Which ones should I choose please? 
    Thank you so much.

    Hi,
    According to your description, my understanding is that you want to set the firewall exception for SQL server.
    Domain profile—This profile is active when the server is connected to an Active Directory (AD) domain via an internal network. This is the profile that's typically active, because most servers are members of an AD domain.
    Private profile—This profile is active when the server is a member of a workgroup. Microsoft recommends more restrictive firewall settings for this profile than for the domain profile.
    Public profile—This profile is active when the server is connected to an AD domain via a public network. Microsoft recommends the most restrictive settings for this profile.
    More information, please refer to the link:
    http://windowsitpro.com/windows/windows-server-2008-r2-firewall-security
    Please 'propose as answer'
    if it helped you, also 'vote helpful' if you like this reply.
    Prabhu

  • What are the best practices for audit report for SharePoint 2013 farm ?

    Hello,
    I am looking for the best practices for audit reporting in SharePoint 2013 farm.Can anyone please provide me checklist/tools/guidelines on same ?
    your help will be much appreciated.
    Thanks and Regards,
    Dipti Chhatrapati

    This is quite open ended question. A sharepoint farm should be well maintained as per :
    1. Microsoft's recommendations on : Topology, Hardware and Software requirements, Operational procedures and most important Capacity guidelines:
    http://technet.microsoft.com/en-us/library/ff758645(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
    2. Organisation's IT policies and procedures : Farm Configuration, Workload and monitoring
    http://technet.microsoft.com/en-us/library/ff758658(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/ee748651(v=office.15).aspx
    3. Industry best practices
    I would suggest to start thinking over these lines and create a plan for your Sharepoint farm.
    You can then create powershell scripts to run these reports at certain frequency to find the changes, any deviation from the standard and health of the entire farm.
    Hope this helps!!
    I LOVE MS..... Thanks and Regards, Kshitiz (Posting is provided "AS IS" with no warranties, and confers no rights.)

  • Backup Sharepoint 2013 Farm with SQL 2012 "Always On" using System Center 2012 R2 Data Protection Manager

    Is backing up and Restoring SharePoint 2013 Farm with SQL 2012  "Always On" High Availability now supported using "System Center 2012 R2 Data Protection Manager"?
    I cannot find confirmation anywhere.
    Regards,
    John

    Per this thread
    http://social.technet.microsoft.com/Forums/en-US/0c047737-4733-4ad5-a24d-3e6e6ff42f70/dpm-2012-sp1-and-sharepoint-2013-on-a-sql-2012-alwayson-ag?forum=dpmsharepointbackup, no it does not look like this is supported.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Discover more sharepoint 2013 Farm

     
    Dear all,
    We have three sharepoint 2013 Farm ( test , staging ,PROD ). I have discovered test Farm after modify microsoft.sharepoint.foundation.library.mp with test server  , after that when i change
    the test to staging server in config file staging farm will get discover however test will get move off ( disappear ). my question is how to discover two or more farm , we are having different credential for each farm.
    Thanks,
    Sengo

    Hello,
    See if the following link helps you.
    http://blogs.technet.com/b/mgoedtel/archive/2012/01/07/sharepoint-2010-multi-farm-monitoring.aspx
    Thanks,
    Tom
    Kind Regards, Tom Ziegler | http://www.sccmguy.com | Twitter @Tom_Ziegler

  • NLB for SharePoint 2013 farm ?

    Hello All,
    I have a very simple three-tier SharePoint 2013 farm which its architecture consists of: (1 DB Server, 1 Application Server, and 1 Web Front-End Server) which all are running on Windows Server 2008 R2.
    I now need to add another (Second) Web Front End server.
    Steps that I know:
    A) Following the installation instructions on: (http://technet.microsoft.com/en-us/library/cc261752(v=office.15).aspx), especially: Connect to a server farm page: Connect to an existing server farm.
    B) Question-1: After completing the installation steps, Should I run the SharePoint 2013 Products Configuration Wizard on the Application server (The server that hosts Central Administration)? Or, No need to do so?
    After that, I will have 2 Web Front-End servers, and I will need to configure load balancing. I found some articles to set up load balancing on a SharePoint farm using the OOTB Windows Server network load balancing (NLB) feature.
    Question-2: Is this adequate and powerful enough? Or, Do you recommend any other third NLB solutions (Reasonable price)?
    Thank you !

    You do not need to run the Config Wizard on the App server. Windows NLB isn't great. It doesn't know about service status (e.g. if IIS is up or not), but it will 'do the job' for a few hundred to low thousands of users. Load balancer appliances are not
    necessarily cheap, but BigIP products are popular.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Deploying Project Server 2013 to an Existing SharePoint 2013 Farm

    We recently deployed the following for our new SharePoint 2013 farm:
    2 SQL server (alwaysOn config)
    2 application servers
    2 WFE
    1 SQL for Dedicated Search
    2 WFE for Dedicated Search
    2 Applications Servers for Dedicated Search.
    After purchasing a company that uses Project 2013 heavily we are now looking at deploying Project 2013 using our new 2013 SharePoint farm.  My question is what is the recommended additional servers that would needed to be deployed to the existing farm?
    Thanks,
    Ric

    Ric,
    It really depends on what your current dataset is, and what the load on your SharePoint Server/Project Server.  Technically, Project Server can just sit on top of your WFE and App Servers for SharePoint. You do not need a complete separate server group
    for Project Server alone, unless there is a special reason to do so.
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

  • Need to Setup Project Server in existing SharePoint 2013 farm

    Hi 
    I have already SharePoint 2013 farm having  4-WFE Servers, 2-Application Servers, 3-dedicated Search Servers, 2-DB servers (Clustering enabled). Now I want to add one more App server having Project Server 2013 in this existing farm environment so Please
    check the below steps. Please let me know If I am wrong in the approach.
    Need to install PS 2013 on all the WFE, Applications and Search Servers.
    Need to Run Sharepoint wizard on all the servers one by one. (Is it mandatory to run wizard on each server or should run only on application servers only)
    The project Server service should run only on application servers.
    Regards, Pankaj Waghmare - MCTS | Consultant

    Hello,
    Those steps are correct for high level :) One thing you might need to do is after installing Project Server on all the servers is apply the same CU / SP to Project Server as SharePoint (using the Project Server equivalent patch) so Project Server and SharePoint
    are patched at the same level. I would do this after installing PS2013 and before you run the wizard on each server.
    I would ensure you test this on a non prod farm first and ensure you have a roll back plan in place.
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

    Hi All,
    I'm getting the below error in My SHarepoint 2013 search Administration page.
    Crawler background activity - The search application 'Search Service Application 1' on server ""  is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
    on the server.
    and when i click on Crawl Log and content source
    it throws the below error
    The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
    the service is enabled. This might also be because an indexer move is in progress
    When i check the search status
    Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
    As of now search service application is online and search is working.But not sure why it throws the above error.
    I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
    But no luck,This is happening in my prodcution environment.
    Any help will be greatly appreciated.
    There are the logs i have found
    05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
    on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
    sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
    Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)    
    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
    Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
    sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
    - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
    http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
    Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
    Anil Loka

    Please try below mentioned steps:
    1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
    2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
    3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
    http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
    4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
    5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • Single SharePoint 2013 Farm for two geographical locations

    Dear All,
    I want your expert advise and suggestion on an "Architecture" for Deploying SharePoint 2013 in multiple geographical locations. I have read every line in article:http://technet.microsoft.com/en-us/library/gg441255%28v=office.15%29.aspx before posting
    this question, for the following scenario:
    Scenario:
    Two locations, say, Loc1 and Loc2.
    SharePoint Farm = Collection of SharePoint servers connected to the same Configuration DB.
    WFE1 will be in Loc1 and WFE2 will be in Loc2 (and connected to the same config DB i.e. same Farm).
    App1 will be in Loc1 and App2 will be in Loc2 (and connected to the same config DB i.e. same Farm).
    Users from Loc1 will be directed to WFE1 and Users from Loc2 will be directed to WFE2.
    App1 will run services and service applications consumed by web applications specific to Loc1.
    App2 will run services and service applications consumed by web applications specific to Loc2.
    I can implement all of the above.
    Now question is "How to provide local flavor for back end SQL?"
    suppose, I configure "Active-Active" SQL clustering SQLNode1 at Loc1 and SQLNode2 at Loc2, how do I specify that web applications meant for Loc1 are fetched from SQLNode1 and web applications meant for Loc2 are fetched from SQLNode2.
    Users in Loc1 are not interested in web applications meant for Loc2 and vice-versa. Currently we are having Two (2) different farms at each location, but going forward we want to consolidate so that "Infrastructure maintenance" is minimized and
    investment in third party solutions can be leveraged by both locations.
    Naveed.DG MCITP, MCTS -SharePoint 2010 Administrator "Vote As Helpful" If it helps!!

    How far away are these SharePoint servers away from each other? Remember that regardless of where a SharePoint server is, it must be able to write to the active instance of the Configuration database, and must have that 1ms timing.
    Active-Active SQL clusters has never been mentioned, as far as I'm aware, in TechNet documentation. I'd consider this scenario unsupported unless you talked to PSS otherwise.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Problem adding DataView in SharePoint 2013

    Hello everyone, i have one problem, so please help me... :(
    I have created site collection in SharePoint 2013 with one subsite. I have created a list in parent site (site collection) and when i am adding Empty Data View (with SharePoint Designer 2013) i can not see the list in Data Sources???? What am I doing wrong?
    Tnx,
    Eli

    Hi Eli,
    Here are the steps I performed when add dataview in SharePoint Designer 2013 for your reference(I assume you have create a list named list1 and document library named doclib):
    Open SharePoint Designer > Open sites > enter site collection:
    http://sp/sites/sitecollectionname
    Expand All Files > locate doclib, right-click it > New ASPX > Rename it as test
    Double-click test > Edit file > click yes to open in advanced mode
    Insert tab > DataView > Empty DataView
    Locate <DataSources> </DataSources> part and insert tab > Data Source. Then you could choose your list.
    Then you could choose the fields you would like to add in the Data Source Details panel in the right.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • SharePoint 2013 Workflow - Change the From Address for an email

    Hello
    I am creating a SharePoint 2013 Workflow Manager Workflow to send out an email when a document is uploaded to a document library. I want to set the From address for the Email activity added to my Workflow. There is no option in Properties to change this.
    This used to be done when creating a SharePoint 2010 workflow in Visual Studio 2012.
    How can I add a From email address for my workflow?
    Thanks
    Yoshi

    Having problems getting SPD 2013 installed on my laptop because of a trial of O365, but I know in SPD 2010 you could find the BCC fields, etc... in the Advanced properties, it wasn't directly available via the common interface.  I know 2013 is very
    different from 2010, and if I can get it to install correctly, I will update, but look for an advanced property, or an XML view where you can find the FROM: field.

  • Added user to SharePoint Group -- Not inheriting the groups rights

    Hello,
    I created a SharePoint 2013 Workflow, where a subsite is being created and after that, the workflow will create a Group with "full control" rights on the subsite. At the end, I add the workflow Initiator to the group. All is done by the REST Api
    like declared in many tutorials.
    Everything is working fine so far, I can Access the site, the group is there with correct privileges and it contains the desired user I am adding with the workflow.
    The strange Thing happens, when I try to surf on the site with that user from the group, because he has no rights at all. Even with the "check permissions" under the Website Settings, there is no permission listed.
    Can anyone explain this to me? It feels like a bug for me, or did I Forget to make something like an "update" command after adding the user?
    Many thanks in advance!

    I haven't seen this with SharePoint groups, but have seen similar behavior with AD groups.  With AD groups its a problem associated with the claims token timeouts.  The solution there was to decrease the timeout for the claims token or wait 24
    hours for the token to timeout.  I suggest waiting a day to see if the user shows up in Check permissions tomorrow.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • In SharePoint 2013, some of the userswith contribute or full control rights are not able to edit and save office doucuments to SharePoint library.

    In SharePoint 2013, Office 2010 and IE 8. Office web apps is not configured.
    Some users with Contribute or full control are not able to edit and save documents back to SharePoint library.
    When they try to save they are getting following error:
    1. https://.....pptx is read-only. Do you want to save changes to a different file name?
    2. Project canot access "https://...." 
       Try one of the following
    The file may be temporarily open by another program. wait a momoment and try again.
    A file with the same name may already exists. Save it with a different file name.
    You may be trying to save to a read only folder. Save to a different folder instead.
    Please help me with this issue.
    will be waiting for any suggestions or solutions.
    Thanks
    Krish
    99

    Thanks again for quick response.
    I have requested users who are having this issue to try check in/ check out, and share the results.
    Result with CheckIn/CheckOut:
    User was able to check out but no edit option.
    'Edit Document' option under 'Files' tab was greyed out. I did check permissions every thing seems fine he has full control over the site and document library.
    Please advise.
    Thanks
    Krish
    99

Maybe you are looking for