Adding a 4870 to a late 2008 Mac Pro

I just got the card and realized my original card only had 1 power cable to the card. I'll have to pick up another 4 pin to 4 pin connector to run the card..
I can't seem to get a straight answer. Will a 4870 work on my machine?

<http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150502374811&ssPageName=STRK: MEWAX:IT#ht1790wt1141>
That should work, but for $10 more you get three display support, audio on the Mini DisplayPorts, free shipping, and a warrantee.
<http://store.apple.com/us/product/MC742ZM/A?fnode=MTY1NDA5OQ&mco=MTg2OTU0NzM>

Similar Messages

My Late 2008 Mac Pro won't update to Yosemite, even though it has the Mac OS X 10.6.8.

I'm trying to update my Late 2008 Mac Pro to Yosemite. I've checked for updates, and it says I don't need any. I'm running OS X 10.6.8. Any suggestions?

Use this display to get a summary of your Hardware, but do not post your serial number here.
 menu > About This Mac > ( More Info ) > Report > Hardware

Late 2008 Mac Pro won't start -- help! Hangs up on Airport: RSN handshake complete on en2.

Hello Mac Pro user,
I have a late 2008 Mac Pro. It will not start anymore. The computer chimes and then goes to the Apple icon screen with spinning cursor, but then it freezes and goes no further.
So I did a single user start up [shift command S],then I let the info. load on the black screen, and found that the system hangs up at this line: Airport: RSN handshake complete on en2. Does anyone know what to do?
How do I get it to boot up again?
Thanks,
Yvette

pull the drives you have. ]
F'ind a way to do a clean system install on another drive.
Clone your user data to another drive also.
ie, create a new solid foundation.
but until your repair your drives, by booting off another device, don't use them. Pull them for now.

HT201343 I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5- do I need Maverick and will this hardware support the Airplay Mirroring?

I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5… do I need Maverick and will this hardware support the Airplay Mirroring?

It doesn't mention anything about a Mac Pro. So no.
http://support.apple.com/kb/HT5404
If your computer did support it, you would still need 10.8 or 10.9 for Airplay to work.

My late 2008 Mac Pro no longer recognizes my DVD Player/Recorder.

It stopped working properly after I installed one of the later Snow Leopard updates. When I insert a blank DVD I don't get the icon on the desktop that I used to get. It seems to recognize music CDs, however. I can't record to CD or DVD. Has anyone had this problem that might be able to tell me how to fix it. I could just purchase a new "SuperDrive" online, but I'm afraid its an OS problem and not the hardware itself. I figured I would install Lion and that would fix it, but it didn't. Any help would be appreciated.

well, you could try using one of those brush type cleaning dvd things, or blasting the lens with compressed air. If that doesn't work, you may have to shut your Mac Pro down, take the side panel off, disconnect the power cord, get in there, disconnect the power and data cable from the dvd drive, wiggle it out, take off the top cover of the dvd drive, clean the lens with a cotton swab and some pure isopropyl alcohol, clean out any dust and crud in there, put the top cover of the dvd drive back, wiggle the drive back in, reinstall the data and power cables, put the side panel back on, then reboot your Mac. Failing that, repair permissions. Your drive may also be toast, especially if you've been using it a lot. Did you know you can pretty much use any ATAPI dvd burning drive in your mac? it's true. I put a lite-on dvd drive from a pc that was about to fail into my mac pro's 2nd dvd drive cage, set both drives to cable select and it worked fine-just like that
hope that helped
John b

USB3 card for 2008 Mac Pro

am considering adding USB 3 capability to my 2008 Mac Pro (which still works great ... I had it overhauled last year...)
I imagine the best way to do this would be a PCI Express card? I still have two unused slots in the back.
Can anyone advise which would be be the best card to get?
I'm currently running Mavericks - currently everything is working, including my four e-SATA ports currently on two PCI-X cards...
w

yes! thank you.
a google search would show lots of options, but for someone like me (who is less savvy than most of the contributors to this discussion board) it's hard to know exactly what card will work with my machine.
Looking at the Sonnet cards, this one seems like a very good bargain -
<https://www.google.com/shopping/product/11936350470791125384?q=Allegro+USB+3.0+P CIe&bav=on.2,or.r_cp.r_qf.&bvm=bv.59568121,d.cWc,pv.xjs.s.en_US.1EneOJbgwUk.O&bi w=980&bih=868&tch=1&ech=1&psi=ikrZUv6xAurlsASmpICgCg.1389972106495.5&ei=k0rZUs-N DOKosASy5ICgCg&ved=0CJcEEKYrMAE>
would this work for me? the price is less than I expected for real true USB 3.0
thanks again
will

Early 2008 Mac Pro + ATI Radeon HD 4870 = Not working

Just took delivery of my new HD 4870 video card today. I installed it in my Early 2008 Mac Pro and booted up. I got a picture no problem on one monitor, but nothing on the other. Furthermore, the display perfpane was missing a lot of controls, like Arrangement and Detect Displays and whatnot.
I did a bunch of rebooting and swapping of cables, and determined that both the mini-display port and the standard DVI connection will drive a monitor. However, if both are plugged in, the only active display is the one plugged into the mini-display port, and there's no option to setup the secondary display.
So I booted into bootcamp, and it automatically recognized both display ports, and mirrored my desktop on both monitors. I downloaded and installed the latest windows drivers, rebooted the machine into windows once more, and was able to configure a multiple monitor display with no problem.
This tells me it's not the card and it's not the motherboard.
Booting back into mac OS, I discovered that it doesn't even recognize that the card has video ram. It thought I had no video ram in the system.
So, this all leads me to the conclusion that Apple shipped me a card that it has not yet provided driver support for.
Hey Apple, can I have my 4870 display driver now?

Hi again,
It was funny to read all your answers on my iPhone while away from my computer. I could have reply on the iPhone but I preferred to wait to give you all the procedure I used to install the beta driver successfully this morning.
To start, I found this link:
http://www.insanelymac.com/forum/index.php?showtopic=155477
and followed the "4870 INSTRUCTIONS", starting like suggested by doing the "First, follow the 4850 INSTRUCTIONS above"... (See the link)
I would like also to specify that I did this without having installed the card physically yet. So I kept my HD 2600 in the computer, followed all the steps excepted for the step 3:
3. Reboot with -f -v (kextcache/verbose mode)
There is no -f nor -v switches available for the reboot command at the shell prompt. I simply rebooted as usual "Pomme -> Redémarrer".
After the reboot, all my software was still working as expected with my HD 2600 card, meaning that these steps are specific and active only for the HD 4870 when it's detected at boot-up.
You may have to Google for the string "Kext" in order to get the application to install the file ATY_Motmot.kext. For your information, ATY_Motmot filename is the same string as the one found under "System Information ->PCI cards" under "Name".
I get:
ATI Radeon HD 4870:
Name: ATY, Motmot
The article is not clear regarding where to find the OpenGL.framework to backup before installing the downloaded one. I found mine under:
/Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/OpenGL.framework
After having shutdown the computer, just after the reboot that proofed everything was ok, I removed the original HD 2600 card and put back the new HD 4870 and boot up...
Then I check the "System Information" and found both "Quartz Extreme" and "Core image" supported!
I launched Aperture, got it!
I launched Final Cut Express, got it!
I launched Starry Night Pro Plus, got it! Then I checked the OpenGL settings in Starry Night Pro PLus and activated both options:
Use shaders where available
Use AllSky shader (Not compatible with all hardware)
When I was doing these actions with my original HD 2600 card, the software was giving me a warning that my hardware did not support these options and that it could crash.
This time, with the HD 4870, it accepted my settings and give me back a very beautiful blue sky with much more shades!
So in conclusion, it works very smoothtly with my system and I am writing this with two monitors, having bought the MiniDP to DVI adapter this afternoon
I am happy!
P.S.: A girl from Apple support called me back this afternoon regarding my problem. She was very happy two when I told her that I did apply the beta driver and that it was working very well...
Good luck and best regards...

I have a late 2008 Mac Book Pro and would like to upgrade to 8G, any suggestions on a brand? I can only find Ramjet or Cruical for the upgrade and there is a $30 difference in price.

I ahve a late 2008 Mac Book Pro and would like to upgrade the memory to 8g. I can only find 2 options Crucial and Ramjet. There is a $40 difference in the cost. Does anyone know if one is better than the other?

I have gotten my RAM from either Crucial or Macsales. They are both excellent.

My late 2008 mac book pro runs slow and freezes

Hi, there! I have a late 2008 mac book pro and few months ago I upgraded the operating system from Snow Leopard to Mountain Lion. Since then my mac book often freezes, it is much slower than it was with Snow Leopard and the most annoying thing of all, is the almost inevidable freezing of the toolbar (where language selection, date, clock and other useful tools are located)
I was wondering if someone has experienced similar issues with his Mac Book Pro when upgraded to OSX Mountain Lion and if someone knows if and how this issue can be resolved?
Thank you.

I have the same problem. Up until 2 days ago my MacBook Pro was running fine, then suddenly things started going wrong. I am using mac os x 10.6.7 as well. Does this have something to do with any firmware updates.
Any help/ suggestions welcome.

Early 2008 Mac Pro - ATI 4870 - Apple 30'' Monitor - SL .... Does it work?

I have an early 2008 Mac Pro with a ATI 2600XT on an Apple 30" Cinema Display. I want to upgrade the video card to take advantage of the new features of Snow Leopard.
Before I take the plunge on buying the ATI 4870 I want to make sure there are no issues with this configuration... Does anyone have an experience with this setup? any issues? ( I assume I will not need to load the drivers since SL should have them)
Also how is the noise level of the ATI 4870? is the GTX card better in this regards?
Thanks in advance,

Other than benchtests and synthetic, there are no OpenCL aware or optimized apps out there. So it is a non-starter I think.
There are performance tests and depends on what you prefer and type of work. Some places the GTX is better and more RAM might help. The $100 is the other factor.
The ATI X1900 and 2600 and 3870 didn't look that good to my eye and I use the 8800GT, shame it was dropped, it was a nice card (just needed better $189 price, but that is true of the X1900 ($89?) and others. I think $349 is way too much for 4870 512MB. Flash PC.
Barefeats has OpenCL TEST in Snow L.

Early 2008 Mac Pro Raid + Radeon 4870

So far this has been a very disappointing experience in upgrading to SL!
I have an early 2008 Mac Pro with Apple software RAID as my boot drive, SL of course is not seeing this as a possible install drive as others have experienced. I have tried to boot directly off of two different SL retail upgrade disks but the installer crashes every time (I've verified that the drive boots off of other disks). I'm starting to suspect that it may be an issue with the Radeon 4870, has anyone else with a similar setup had any success in upgrading to SL? I'm going to try installing the original video card to see if that helps, otherwise it looks like I will be doing an install to a new hard drive from within Leopard.

I've got a 2006 Mac Pro, the first gen one. I've got a flashed PC 4870 and a three disk software raid of 640GB Western Digital HD's, Model: WDC WD6400AAKS-00A7B0. When I ran the install disk from Mac OS, I couldn't install to the raid, it didn't show up as a volume that could be installed to. However when I restarted from the DVD I had no trouble installing onto the raid at all. The install finished without a hitch. I also ran an install to my Intel X25-E and didn't have any trouble there either. So I know it is possible to get the install to work with a raid and a 4870.
Obviously my setup isn't exactly like yours though. But that's the best I can do.

Reinstal Mac OS X, iWork09, iLife09 on Late 2008 Macbook Pro unibody ques?!

Alright so I've got a quick question for you knowledgeable people, I've got a late 2008 macbook pro unibody and has unfortunately installed some crap on my hard drive since i got it, and i want to be just like i got it out of the box. I want to delete everything off my hard drive, like completely erase, do I do that using the disk utility application or could i erase it completely with the mac OS X install disk that came with my mac? That's the specs of my harddrive(Hitachi Media Total Capacity : 232.9 GB (250,059,350,016 Bytes). When I reinstall my mac OS X, I will be waiting for Snow leopard (because its only $30 bucks if an upgrade), since they say the footprint of that O.S. will be considerably smaller that os x. but before i install snow leopard i want to reinstall my iwork and iLife programs, which are both 09. This leads to the next question that i have, my mac shipped with iLife and iWork 08 and I bought versions 09 after. They are single licenses and I want to know if I will be able to reinstall iWork09 and iLife09 after my reinstall of OS X without buying them again.
Thanks for any help in advance.;)

Welcome to Apple Discussions!
Here's an article on Installation options:
http://support.apple.com/kb/HT1545?viewlocale=en_US
It should give you clear instructions on how to proceed. You will boot from your install disc to do the Erase and Install. To erase the boot drive, you will use the Disk Utility that is on your install disc.
You have the iLife 09 and the iWork 09 discs? Then you should be able to reinstall them from the discs after installing the OS. The single license means that you are licensed to use them on only one computer at a time.
Be sure to make a good backup of anything you want to keep before erasing your drive and reinstalling the OS.
Incidentally, you can save a few GB's of space if you do a custom installation and eliminate any languages and printer drivers you won't ever use.
Good luck!

I have an old (late 2008) Mac OX S and I want to hook it to my HDTV, but I get no signal??

I have an old (late 2008) Mac OX S and I want to hook it to my HDTV, but I get no signal??
Please help!!

I know I had an issue trying to connect a VGA cable to my HDTV, if I did not already have the TV input switched to the VGA input BEFORE I plugged it into my Mac. Because the TV had not been taking to the port, it was not sending the right signals to the Mac.
When I would later switch the TV input to the VGA after the Mac was connected, I got messed up video.
I'm just speculating this might be related.
But playing 20 questions (some of which have already been asked by X423423X):
What Mac
What TV
What kind of TV input (HDMI, VGA, DVI, other?)
What kind of adaptor are you using on your Mac
Did you try with the TV input already switched to the correct input source before attaching to your Mac?

My early 2010 mac mini is running super slow on the internet compared to my late 2008 macbook pro on the same internet

My early 2010 mac mini has been running really slowly on my network. My late 2008 Macbook Pro runs much faster despite being an older computer. The Mac Mini really doesn't have much on it and almost all of its storage space is there. It downloads at about one third of the speed as my Macbook Pro. Any help is appreciated. Thanks.

When did this difference begin? Did you make any recent changes?

Instant client on intel but late 2008 macbook pro Mac OS X 10.5.5 (9F2114)

I can't get instantclient to run on the new macbook pro (though it worked fine on my old mac book pro)
# echo $ORACLE_HOME
/usr/local/oracle/instantclient
# echo $PATH
/sw/bin:/opt/local/bin:/opt/local/sbin:/usr/local/bin:/Library/Frameworks/Python.framework/Versions/Current/bin:/sw/bin:/sw/sbin:/usr/X11/bin:/Developer/Tools:/bin:/sbin:/usr/bin:/usr/sbin:/usr/libexec:/usr/X11/bin::/usr/local/bin:.:/usr/local/oracle/instantclient:/usr/local/maven/bin
# echo $SQLPATH
/usr/local/oracle/instantclient
# echo $DYLD_LIBRARY_PATH
/usr/local/oracle/instantclient
# sqlplus
[1] 616 bus error sqlplus
# which sqlplus
/usr/local/oracle/instantclient/sqlplus
# ls $ORACLE_HOME
BASIC_README libheteroxa10.dylib libsqlplus.dylib
JDBC_README libheteroxa10.jnilib libsqlplusic.dylib
SQLPLUS_README libnnz10.dylib ojdbc14.jar
classes12.jar libocci.dylib orai18n.jar
genezi libocci.dylib.10.1 sdk
glogin.sql libociei.dylib sqlplus
libclntsh.dylib libocijdbc10.dylib
libclntsh.dylib.10.1 libocijdbc10.jnilib
I'd really appreciate any help. Does anyone else have this working on the late 2008 macbook pro?
Suggestions?
Thanks!
Edited by: uncreative on Oct 31, 2008 11:28 AM

Same issue here. Putting darwin ports out of the way did not help.
Running (sqlplus) under gdb gives:
====================================================================
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_PROTECTION_FAILURE at address: 0x00000000
0x014556d4 in mac_shared_library_environ_init_routine ()
(gdb) where
#0 0x014556d4 in mac_shared_library_environ_init_routine ()
#1 0x8fe15a82 in __dyld__ZN16ImageLoaderMachO16doInitializationERKN11ImageLoader11LinkContextE ()
#2 0x8fe0e723 in __dyld__ZN11ImageLoader23recursiveInitializationERKNS_11LinkContextEj ()
#3 0x8fe0e6b5 in __dyld__ZN11ImageLoader23recursiveInitializationERKNS_11LinkContextEj ()
#4 0x8fe0e6b5 in __dyld__ZN11ImageLoader23recursiveInitializationERKNS_11LinkContextEj ()
#5 0x8fe0e809 in __dyld__ZN11ImageLoader15runInitializersERKNS_11LinkContextE ()
#6 0x8fe04102 in __dyld__ZN4dyld24initializeMainExecutableEv ()
#7 0x8fe07b5f in __dyld__ZN4dyld5_mainEPK11mach_headermiPPKcS5_S5_ ()
#8 0x8fe01872 in __dyld__ZN13dyldbootstrap5startEPK11mach_headeriPPKcl ()
#9 0x8fe01037 in __dyld__dyld_start ()
====================================================================
No other info. shown in core dump.
Looks like a problem with dynamic library initialization? Sqlplus works with desktop (intel). Running 10.5.5 on both machines.
Culprit machine specs:
2.53 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
One difference between desktop machine that works is that it only has 2 Gigs of mem..
My oci app gives the same error when using oracle client apis (running on culprit laptop).
Edited by: user2331793 on Nov 3, 2008 2:52 AM

Adding a 4870 to a late 2008 Mac Pro

Similar Messages

Maybe you are looking for