Adding a bookmark does not save the bookmark if you press cancel

When i click
bookmarks -> bookmark this page
It comes up with a popup saying "Page Bookmarked". Naturally, I hardly ever want to change the name of my bookmarked items so I click cancel. My bookmark is gone. Either it is getting deleted when i press cancel to the annoying popup that comes up, or its not getting saved in the first place.
I consider this a HCI bug. If you want to argue that this is the correct functionality that you would expect, I must disagree. Bookmarking has always been a single click procedure and I'm not sure why pressing "cancel" would mean the bookmark is not stored. I have lost countless bookmarks from pages that I have thought were bookmarked but then when I tried to access them the next day, they were gone.

Hi Cor-el. Thanks for the tip. I agree with everything else you have said. It is good to have the functionality for accidental bookmarking.
However, my quarm is with the text "Page Bookmarked". Essentially what you have said means that it is actually a lie. It hasnt been bookmarked at all until I press confirm. Perhaps you should change the text that pops up since it is quite misleading. Perhaps "Bookmark Page" or "Page Bookmark" would suit it better. The extra "ed" means that it's actually referring to the verb and not the noun which is why it confuses me.
I know it is a small thing, but it has annoyed me enough times to be bothered to sign up to these forums and ask the question.
Thanks

Similar Messages

Hide Bookmark does not hide the bookmark

Hide Bookmark does not hide the bookmark
I had a swf but the discussion would not allow it

Click the Bookmarks icon in the Safari menu bar to hide or show Bookmarks.

Firefox does not sync the bookmarks icons. Why?

Firefox does not sync the bookmarks icons. Why?

Having the same problem. Uninstall and reinstall did not help. Is there any progress on this? I'm using the latest android OS, and sync is working just fine on my other devices. The android phone is syncing my tabs but not my bookmarks.

When trying to customise-organise the Firefox 17 does not allow the bookmarks toolbar to be placed above the tabs toolbar is there a solution other than reverti

When trying to customize-organise the Firefox 17 does not allow the bookmarks toolbar to be placed above the tabs toolbar is there a solution other than reverting to a previous version of FF?

# Type ''about:config'' in the address bar and press Enter.
# Press the big button to bypass the warning.
# In the search box, paste ''browser.tabs.onTop''
# In the search results, double-click ''browser.tabs.onTop'' to set its value to '''false'''.
Note: If you're using either Windows 7 or Vista with an Aero Windows theme, performing the above will make a large part of the Firefox window glassy. If you find this unpleasant, the simplest thing to do is to install a persona.
* https://addons.mozilla.org/firefox/personas/solid

Newly added discoverer responsibility does not open the workbook sheets

Adding reports to newly added discoverer responsibility does not open the workbook sheets
Actually its a new responsibility where i add existing workbook, also shared the business area but when trying to execute the report through my user firstly it says "Workbbok cannot be expanded, Unable to open workbook" later when i close the page i get the below error
“Contact with the Discover server has been lost. To continue with your work, please restart Discoverer Plus. If this problem persists, please contact your Oracle Application Server Administrator” error message.
Please suggest.

Hi,
You need to run a trace for this user to diagnose this issue. Look at note 133055.1 for more details.
Rod West

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

Recording does not save the file

We are facing a serious problem with Captivate 2. After
recording about 40 -50 slides it does not save the file.
The system hangs for several minutes and there’s no
response.To analyze this problem we have tried out User Forums and
FAQs.In the User Forum too similar problems are reported. For
example, visit:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1261116&enterthread=y
In fact, in our team Captivate is loaded on a standalone
hi-end system with ample space and memory.
We have also tried workarounds to address this issue. For
example, we deleted all temp files from library and we also saved
it on a short path like c:/project.
Nothing works!!!

Hi Madduser and welcome to our community
When you say
To analyze this problem we have tried out User Forums and
FAQs are we to assume you simply searched them and read the
threads? I'm assuming this because this is your first post here.
You will note that the thread you linked to mentioned the
person was attempting to save on a network. I do see you have tried
using the shortened local path to no avail, so I'm guessing the
network is ruled out here.
As usual, I've got more questions than answers, but hopefully
as we work through them something will come to light.
* Have you EVER been able to create and save things using
Captivate? Or did you just install it and it's never worked for
you?
* Have you tried what is outlined in the following Technical
Note?
Click here to read the
Technical Note
Cheers... Rick

Why the "Actions" does not save the Overprint Black

Hi!
Ai CC 17.0.0
Why the "Actions" does not save the Overprint Black?
I can not create an action that will automate this time a very common activity?
Why?
Best Regards!

I was just able to. I am in Illustrator 6 on a Mac OS 10.6. I started a new action and went through the menu just like your screen shot, chose my options and clicked ok, then stopped recording the action.
I found to use the action I had to have something selected.
I see that you are in Illustrator CC, perhaps there is a difference there. But for the record, on my system, it worked.

IMAQ ClipboardToImage IMAQ Vision does not support the file type you specified.

Hi.
I have been trying out the inventeering INVENTvisionIMAQexample.vi. But i always encoutered
an error in the INVENTvisionVFWcopy.vi of "IMAQ ClipboardToImage IMAQ Vision
does not support the file type you specified." And the video window does not
appear full size with real-time capture image. Does anyone encountered this problem as well? Please enlightened me. Thank you.

What error it is throwing ? if you could attach the vi then it will be easy to find out the problem

"Organize Bookmarks" does not appear under Bookmarks menu, even though Help advises to go there.

I've needed to eliminate Bookmarks. Because I have no "Organize Bookmarks" or "Manage Bookmarks" option under the Bookmarks menu, I've tried dragging bookmarks off the list onto my desktop. I've tried right-clicking to get a "delete" option (but there is none). I've gone to "Help" where I'm advised to click on the Bookmarks menu item, select "Organize Bookmarks," and proceed from there. An image of the items in "Organize Bookmarks" appears in this "Help" instruction. BUT -- "Organize Bookmarks" does not appear when I click the Bookmarks menu item.

That menu item was changed to '''Show All Bookmarks''' in Firefox 4.0.

TS1398 ipod touch does not save the password of the wifi

my ipod touch 4g does not save my home wifi password but in my bussines it does please help

Two things to try:
If your router is set to hide its SSID (network name) then go into the router's administration and change this setting. For some reason, this can cause problems with iOS devices remembering the network password. There's really no need to hide your network name, there are (or were) apps that could show you any and all Wi-Fi networks within range, even if they're hidden.
If you're using WEP encryption, try using WPA2. It is much more secure and seems to play nicer with iOS devices.

Read It Later plugin does not save the tags for web sites all the time

Read It Later does not preserve the tags assigned to websites in some cases. Sometimes I go through the list, assign tags, close the browser hoping it would write all the changes to the internal database (readItLater.sqlite) and after reopening the browser, some sites have the tags and some don't.

@Swarnava. Thank you, but for now I would disregard your response, since I'm not planning to upgrade and I've seen posts where people have the same issues with the latest version of 8.0.1

Adding new bookmark does not save

In my book, every time I add a new bookmark and do pretty much any other operation, the bookmark disappears. If I switch documents, or if I syncnronized documents, or try to print the book, when I go back to the document where I created the bookmakr the newly created bookmark is gone. Any ideas what is wrong?

What happens if you save the document after creating the bookmark, but before you do anything else?
Does it only happen on one document in your book? If so that document might need a cleanup: http://forums.adobe.com/thread/526991

I have the most recent firefox version and there is no "live bookmark" anywhere, not in the bookmark folder or toolbar or anywhere on my computer. Where can I find this?

I downloaded the RSS ticker but can't add anything to it because it requires the use of live bookmark, which I simply do not have. I have looked. Is there a way to download it separately? Or can anyone tell me a way I can access it besides just clicking on the bookmarks section of firefox?

Mozilla says you replied but I cannot see your response. They seem too, to be so eager to have be say the problem is resolved when it isn't.

On saving mail as .rtfd file does not save the attachments.

For a few updates to Leopard now I have had a problem with Mail. If I opt to save with attachments the file is saved as a .rtfd file but when I open the said file in Text Edit there are no photos or whatever the attachment was. I have been saving this way for years and only in the last year or so has this problem arisen. I don't want to save the files as .eml files (which DO save the attachments). Anyone else noticed this problem?

Dear Glyn
you posted this bug Oct 19; it still has not been fixed, Is there any way to push Apple people to stop behaving like windows people ?
I much regret I installed the new systemsoftware ...
What can we do to FIX it - i need the feature and it has a button to include the attachment, so it should work
grrr

Adding a bookmark does not save the bookmark if you press cancel

Similar Messages

Maybe you are looking for