Adding a boot LUN in Datastore view

Hello,
We recently moved to SAN boot, once rebooted the host i was going to add the new LUN under datastores but there's something not clear, here's the screen.
What the "use free space" is intentended for? Is it going to perform any formatting action on the LUN?
I just wanted to mount that datastore.
Thank you!
Fabio

Thanks, but this is something i have to fix in some way.
Talking with storage guys and basing on the outputs pasted later in this message, looks like that the problem could have been generated after a representation of the same LUN due to maintenance reason
esxcfg-volume -l
VMFS3 UUID/label: 4dee441b-f6581be0-42c8-0017a477f820/LocalStorage-Server1
Can mount: No (the original volume is still online)
Can resignature: Yes
Extent name: naa.60002ac0000000000000007c00009a3f:5 range: 0 - 138495 (MB)
esxcfg-volume -m LocalStorage-Server1
Mounting volume LocalStorage-Server1
Error: Unable to mount this VMFS3 volume due to the original volume is still online

Similar Messages

Error when adding a partition to a materlialized view

Hi,
I am getting this error when adding a partition to a materialized view.
ALTER MATERIALIZED VIEW mvedw.MV_CLM_CAPITN_F ADD PARTITION MAR2013 VALUES LESS THAN ('201304')
ERROR at line 1:
ORA-14074: partition bound must collate higher than that of the last partition
Please advise.
Regards,
Narayan

SQL> select TABLE_OWNER,TABLE_NAME,PARTITION_NAME,HIGH_VALUE from dba_tab_partitions where table_name =
'MV_CLM_CAPITN_F' order by PARTITION_NAME 2
3 ;
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F APR2009 '200905'
MVEDW MV_CLM_CAPITN_F APR2010 '201005'
MVEDW MV_CLM_CAPITN_F APR2011 '201105'
MVEDW MV_CLM_CAPITN_F APR2012 '201205'
MVEDW MV_CLM_CAPITN_F AUG2009 '200909'
MVEDW MV_CLM_CAPITN_F AUG2010 '201009'
MVEDW MV_CLM_CAPITN_F AUG2011 '201109'
MVEDW MV_CLM_CAPITN_F AUG2012 '201209'
MVEDW MV_CLM_CAPITN_F DEC2008 '200901'
MVEDW MV_CLM_CAPITN_F DEC2009 '201001'
MVEDW MV_CLM_CAPITN_F DEC2010 '201101'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F DEC2012 '201301'
MVEDW MV_CLM_CAPITN_F FEB2009 '200903'
MVEDW MV_CLM_CAPITN_F FEB2010 '201003'
MVEDW MV_CLM_CAPITN_F FEB2011 '201103'
MVEDW MV_CLM_CAPITN_F FEB2012 '201203'
MVEDW MV_CLM_CAPITN_F FEB2013 '201303'
MVEDW MV_CLM_CAPITN_F JAN2009 '200902'
MVEDW MV_CLM_CAPITN_F JAN2010 '201002'
MVEDW MV_CLM_CAPITN_F JAN2011 '201102'
MVEDW MV_CLM_CAPITN_F JAN2012 '201202'
MVEDW MV_CLM_CAPITN_F JAN2013 '201302'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F JUL2009 '200908'
MVEDW MV_CLM_CAPITN_F JUL2010 '201008'
MVEDW MV_CLM_CAPITN_F JUL2011 '201108'
MVEDW MV_CLM_CAPITN_F JUL2012 '201208'
MVEDW MV_CLM_CAPITN_F JUN2009 '200907'
MVEDW MV_CLM_CAPITN_F JUN2010 '201007'
MVEDW MV_CLM_CAPITN_F JUN2011 '201107'
MVEDW MV_CLM_CAPITN_F JUN2012 '201207'
MVEDW MV_CLM_CAPITN_F MAR2009 '200904'
MVEDW MV_CLM_CAPITN_F MAR2010 '201004'
MVEDW MV_CLM_CAPITN_F MAR2011 '201104'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F MAR2012 '201204'
MVEDW MV_CLM_CAPITN_F MAR2013 '201304'
MVEDW MV_CLM_CAPITN_F MAY2009 '200906'
MVEDW MV_CLM_CAPITN_F MAY2010 '201006'
MVEDW MV_CLM_CAPITN_F MAY2011 '201106'
MVEDW MV_CLM_CAPITN_F NOV2009 '200912'
MVEDW MV_CLM_CAPITN_F NOV2010 '201012'
MVEDW MV_CLM_CAPITN_F NOV2012 '201212'
MVEDW MV_CLM_CAPITN_F OCT2009 '200911'
MVEDW MV_CLM_CAPITN_F OCT2010 '201011'
MVEDW MV_CLM_CAPITN_F OCT2011 '201111'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F OCT2012 '201211'
MVEDW MV_CLM_CAPITN_F SEP2009 '200910'
MVEDW MV_CLM_CAPITN_F SEP2010 '201010'
MVEDW MV_CLM_CAPITN_F SEP2011 '201110'
MVEDW MV_CLM_CAPITN_F SEP2012 '201210'
These are the list of partitions available.
Regards,
Narayan

Windows 2008 R2 iSCSI Boot LUN - NIC driver issue

Hello,
I've gotten the opportunity to create a win2k8r2 golden image that will be deployed to IBM3650 M3's over
iSCSI boot LUNs. I have a need to update the on-board Broadcom 1Gb NICs from the drivers that come with the installation media. I am able to load the drivers that I need without any issue, the system survives multiple re-boots and displays the expected driver
version via device manager. After I prepare the image I run sysprep, sysprep runs smoothly and the system shuts down as expected. At this point I unmap the existing LUN and clone the sysprep'ed image out.
This is where I run into trouble, if I update to the latest Broadcom driver the OS fails to boot, the host
logs into the LUN successfully and I get the Windows splash screen after a bit the screen goes black and I get no response from windows at all. With this behavior I would generally expect that there is some issue with my unattend file but if I don't upgrade
the driver there are no problems, windows boots normally, and the post install process runs successfully. After some digging I saw that I might be running into KB974072. Just as the article suggested I inserted the necessary drivers into the installation
media. Unfortunately this produced the same result.
I've got PersistAllDeviceInstalls set to "true" in the generalize pass of the unattend so sysprep
should not be making any changes to the drivers. If anyone has any ideas on what else, if anything, I can put in the unattend to get sysprep to leave the drivers alone or any thoughts on this issue at all I would greatly appreciate it!
Regards,
Toll_Hou5e

Hi,
First, try to set the registry key before capture the image.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Settings\sppnp set
PersistAllDeviceInstalls to
1.
If it doesn’t work, we can try another to way, inject driver packet during installation.
Managing and Deploying Driver Packages
http://technet.microsoft.com/en-us/library/dd348456(v=ws.10).aspx
Hope this helps.

Boot Lun size for W2012 installation

Is there a rule how big a boot lun must be for a W2012 server installation; server memory size, e.g. 64GB / 128GB / 256 GB / 512 GB
I have seen, that for a 512 GB size, a boot lun of 60GB is by far not enough.

Wont argue, taking time with customer I dont have to try and help you. Typically when the "Unable to install" message is up there its because the MS Installation CD is not currently mapped in the Virtual Media due to the Drivers CD being mapped. Map the drivers CD, install drivers for Storage->Cisco since we're using the VIC cards and booting from SAN. Once the fnic driver is installed I can see the LUN but it says cannot install to it. At this time I typically add a few more drivers to save time, like network for cisco, storage for LSI as well as chip set but you dont have to. With the error showing you go to virtual media, uncheck the map driver.iso file, check the box to map the MS installation cd/dvd again. Returning to the server installation the error still shows. At this time I now click refresh below the list of drives and once that refresh has completed the error is gone but a new one shows stating the LUN is too small and needs to be increased to 150GB. This size is because of page file required due to our memory amount, this will change based upon your memory for the blade, per microsofts documented amounts. However we still wanted 40GB for the bootable LUN so we clicked "Next" despite the error and it continues and starts the installation. This is our experiance, and at this customer site I have now done 22 servers this week, some 2008 and some are 2012 and all of them reacted the same, which is consistent with my past installs.

Boot camp can't view Mac partition

Hi guys. So heres my problem. I have a late 2012 27" Imac with a 3TB fusion drive, and I have boot camp successfully installed with Windows 8 (currently).
So my problem is when i'm booted into Windows, I cannot view my Mac partition at all. From what I understand, Apple have included HFS drivers which should enable me to at least view my Mac HDD when booted into windows, and the drivers are installed properly, however I still cannot even see my Mac HDD.
I have searched far and wide for possible solutions or even an explination as to why this isn't working for me, with no prevail. From what I understand, I think it might be the fusion drive which is preventing the reading capability. All I know is that i've tried almost everything (MacDrive etc.) and nothing works for me, I just ultimately want to be able to access my Mac HDD when im booted into Windows.
I have also tried on Windows 7 but I end up with the same problem.
CAN SOMEONE PLEASE HELP! THIS IS DRIVING ME CRAZY!
Thanks guys, any help will be appreciated!

I believe that you have already answered your own question without realizing it.
You indicated that yoru MacOS partition is on a Fusion Drive. If that is the case, then I do not believe that it is supported by Boot Camp, and you won't be able to access it. If you double check teh Boot Camp documentation, I believe it should clarify that. Fusion Drives are new technology from Apple (within the last year or so) and the technology is not really available to third parties yet, so other drivers like MacDrive, or HFS+ For Windows from Paragon won't have the ability to access the Fustion Drive until they either license the technology from Apple, ot attempt to reverse engineer it for themselves...

Adding custom column to Process tracking view

I have a requirement that in process tracking screen, some custom column (e.g instruction) should be added so that different processes listed there can easily be differentiated.
I tried to do this change in Workspace through Preferences->Manage Column Headings -> Tracking. But it affects only the Tasks view (Audit tab) for the process and not the initial process tracking screen. I also tried creating a process variable and made it Visible in UI and Searchable so that it is shown in the column heading list. But still that heading does not show up in the initial process tracking screen.
Is there way through which we may be able to customize the column headers for the initial tracking screen?
(The server is Livecycle 8.0.1)
Thanks,
Ashutosh

Not that I'm aware of.
However, we have built an enhanced tracking and enquiry tool that provides a lot more flexibility than the built-in tracking, and is also very easy to configure.
Read about it: http://www.avoka.com/avoka/enquirytool.shtml
Try it: http://www.avoka.com/apps/checkcookie?location=/apps/qpacdownload&qpac=y&qpac_code=Worksp aceEnquiryTool1.8
Howard
http://www.avoka.com

Adding Border to Photos in Detail View

Is it possible to add a simple border to the photos in the detail view? I've tried adding borders to the photos in the grid view using the inspector and the floating/popup window but the borders only show up in the grid view and not in the detail view. If anyone knows how to add a simple colored border to the photos in the detail view I would really appreciate it. Thanks.

Hi, I'm not sure if this will help or solve the problem, but you could take a look at the link attached for OnOne Photoframe, it's free, so it may be worth checking out. My version works as a plug-in for Aperture, not sure about this one.
http://www.ononesoftware.com/free/

Driver Added to Boot.wim but won't recognise on PXE boot

Hi, this is a bit of an odd one.
I have taken the boot.wim file from Windows 7 Pro DVD > Sources folder. I have injected the correct network driver (tested within online image using drvload, I get an IP address), committed this to wim and then added into WDS environment:
Windows Server 2003, WDS not sure what version (how can I find this out)?
I have DOUBLE checked that the .INF file for this driver I have injected is in fact showing in the C:\windows\system32\driverstore etc by mounting wim again and checking the mount folder.
When I PXE boot and select this boot image however, I still receive the 'WDSclient, unable to match network driver' error.
If I hit shift + F10 and manually load the exact same driver from USB, I can again get an IP address afterwards! So I know for a fact I am injecting the correct driver. It's almost as if the setup.exe process isnt loading the driver even though the file
is there.
Any ideas?
Thanks

Solved! Well, using a workaround.
Installed WDS on one of our Windows 2008 servers so I had the additional options within WDS to add driver packages etc. Added driver this way then exported the image and imported into the original WDS server. Works fine.
Can't just switch to using the 2008 server full time currently as I'm on a tight deadline to roll an image out and the network has many vlans, I'd have to change config to allow traffic from our build network VLAN environment to new WDS server etc.

Collections Management - Adding Field to Customer Invoice Level View

Hello,
Has anyone successfully added additional fields available in FBL5N to the invoice level view of a customer when drilling into the customer invoice detail from a worklist?
Thanks, Kevin

Hi Kevin,
The BadI for adding fields when displaying worklist items is UDM_WL_ITEM_DISP_C. You will need to add your fields to the customer include C_ATTRIBUTES in order to get them to display. Drill into the changing parameter of the method BEFORE_ALV_DISP to see more detail on that.
Once you have added your new fields you will need to fill them with data within that BadI method and also add the field to the displayed ALV when you go into your worklist from the front-end.
Any questions just let me know.
Cheers,
Brenton.

Can xhost be added to boot in Solaris

Xhost + is needed for the reports server to function. Up to now we have been manually running this command since our SA says it cannot be run automatically upon boot. This manual approach has caused problems when the server reboots at odd times and the root user is not available to run the xhost, leading to the reports server not working properly.
Is it possible to run the xhost + as part of the boot process? The environment is Solaris 8. -quinn

Hi, I suggest reading this document, it's easy:
http://qwuh.no-ip.com/oracle/index.html
It's contains all you need for this!
Greetings from Palma!

BSP-Error while adding a "Save-Button" to a View

Dear Community,
I have created a UI-Component which contains a Window and a View. I already connected the view to the window. What I'm trying now is to add a "Save-Button" to save the input of the view. This is my Structure:
The Code of USERINPUT.htm is as follows:
Here are my Questions
1) What exactly do i need to put into parameter "id" and "table" within the configCellerator? My window and view are connected and when it opens there should be the "Save-Button".
2) When I select "Test" my browser opens but I cannot see the preview, intead I get this exeption. Is my code wrong or where is my mistake?
Thank you for your help!
Marcel

Hi Marcel,
if you want to create buttons in your form view there is a method in your implementation class that is
get_buttons.
you have to implement the method IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS from your implementation class.
example:
   *****************SAVE***************************************************************************
CLEAR ls_button.
ls_button-type     = cl_thtmlb_util=>gc_icon_save.
ls_button-on_click = 'SAVE'.                              "#EC NOTEXT
ls_button-page_id = me->component_id.
ls_button-enabled = abap_false.
IF view_group_context IS BOUND.
    IF view_group_context->is_any_view_editable( ) EQ abap_true AND lr_entity->is_changeable( ) =abap_true.
      ls_button-enabled = abap_true.
    ENDIF.
ENDIF.
APPEND ls_button TO rt_buttons.
* Toolbar Divider
CLEAR ls_button.
ls_button-type     = cl_thtmlb_util=>gc_separator.
ls_button-enabled = abap_true.
APPEND ls_button TO rt_buttons.
And write an event handler for this:
   METHOD eh_onsave.
DATA: lr_core    TYPE REF TO cl_crm_bol_core,
        lr_entity TYPE REF TO cl_crm_bol_entity,
        lr_tx      TYPE REF TO if_bol_transaction_context.
lr_entity ?= me->typed_context->btadmini->collection_wrapper->get_current( ).
lr_tx ?= lr_entity->get_transaction( ).
IF lr_tx IS NOT BOUND.
    lr_core = cl_crm_bol_core=>get_instance( ).
    lr_tx = lr_core->begin_transaction( ).
ELSE.
    IF lr_tx->check_save_possible( ) = abap_true.
      CHECK lr_tx->save( ) EQ abap_true.
      lr_tx->commit( ).
    ENDIF.
ENDIF.
me->view_group_context->reset( ).
when ever you want to call any transaction while button click go through this link..
call transaction launcher on button press with parameter passing
you can come to know how to call.
in that doc you have to create one transaction launcher for your standard workflow. then that tcode you
need to call using that concept..
if you want to create table view go through this link..
SAP CRM WEB UI : 43.CREATING TABLE VIEW FOR LINE ITEMS WITH DEPENDENT CONTEXT NODES
CRM Web UI Technical - Creating Table View In Web UI - CRM - SCN Wiki
Thnaks & Regards,
Srinivas.

Why can't I delete added mailboxes on my iPad mini since iOS 8 update? Every time I try to delete an old mailbox that I added it boots me right out of mIl completely. I want to clean up and get rid of old unused mailboxes?

why can't I delete added mailboxes on my iPad mini after the ios8 update?

The mail app is crashing on you for some reason. Close the mail app and reset your iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't help, you can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

Itunes arranges new added albums to the end of viewing

well i guess the headlight is not really clear so i'll try to describe it here. when i add a new album to my itunes library it will add it to the end of the list of the albums. so for example i add some of the John Mayer's album into my itunes library and even though the artist name is John Mayer (begins with J) it will appear at the end of the list. this happens in every view option (coverflow, grid view, list). if i put this into an ipod it will appear there just like on my computer. it's messed up. what am i suppose to do? it happens only when i add an album not with a single song and i don't want to add an album by one song at a time. i use Album-by-Artist sorting. can anybody help? thanks,
marek

Just a guess, but do the tracks at the end have the Compilation flag set to Yes ?
*Album not with others by same artist*
iTunes relies on the Gracenote CDDB database when identifying CD's. This often marks collections or anthologies of an artist's work as a compilation. In iTunes, however, the compilation flag has the logical function of grouping together tracks with the same album name, but different artists on each track, e.g. "Now That's What I Call Metal 666!". These compilations are then all grouped together at the end of cover flow. Most of us however, would expect "Greatest Hits" albums to be listed with the other albums by the same album artist. For albums which are essentially by a single album artist or group it is best to set the appropriate value for the album artist and clear the compilation flag.
tt2

Adding Inbuilt OIM fields in User View form OIM 11gR2

I am working on customizing my OIM User View form. I want to include some internal OIM dates like USER create date (USR_CREATE in USR table)
USER update date (USR_UPDATE in usr table) in my USER VIEW FORM.
Below are the steps i am performing:
1. Login into identity console
2. Activate sandbox
3. Go to users link
4. Click on search
5. Click on any user (user login)
6. In view page click on Customize button on the top right
7. click on view-->source-->click on area--> edit
But after here i do not see any option to import the inbuilt OIM dates to form.
Please provide a solution/documentation/referrence material.
This is a bit urgent so quick action will be very helpful..
thanks

If you don't able to see this in the Managed User data component then you can't include those field.As you know these attributes are for OIM internal usage.
So, you can't include these OOTB system attributes.
If realy it is required for your business need. you can try below
1. create an UDF say USR_UDF_UPDATE
2. write a trigger(insert,update) on USR table and copy USR_UPDATE value into USR_UDF_UPDATE if any insert update happen on USR table.(you can specify the trigger based on specific column as well).
3. now add this UDF to the user view page
--nayan

Adding motion to photo within the viewer(s).

"You can add motion to a photo before adding it to your movie, or any time after you have added it." Doesn't seem to work in my case. I have numerous photos dragged succesfully into my movie from the pane, as well as some stills made from video footage.
In either case, I am unable to bring up the Photo Settings window per the Help instructions. I go to the Media button/photos pane but the "Show Photo Settings" window option is grayed, and unable to be selected.
I haven't been able to figure out a work-around for this....HELP!
iMac 2 GHz intel core duo Mac OS X (10.4.8) iMovie HD 6.03
iMac 2 GHz intel core duo Mac OS X (10.4.8)

When we import a photo iMovie creates a clip. If we later edit that clip — add a title, for example — the clip is no longer editable as a photo. We aren't allowed to use the Photo Settings palette to Update the clip. We can't apply a different zoom setting, for example.
My guess is your problem clip has been edited in some way so it can no longer be Updated. Because of that, the "Show Photo Settings" button is disabled.
If you wish, you should be able to choose Advanced > Revert to Original to return the clip to its original state. Then iMovie should allow you to Update it.
Be aware of a bug, however, that can affect whether an Update is even possible:
http://discussions.apple.com/thread.jspa?threadID=714698&tstart=0
Karl

Adding a boot LUN in Datastore view

Similar Messages

Maybe you are looking for