Adding a Clip in the middle of the timeline
I know this is a dumb question, but I've been watching tutorials and reading about FCE; however, I cannot locate an explanation of how to insert a clip in the center of the timeline or a transition in the center of the timeline without messing everything else up.
Thanks for your understanding!
I assume you want to insert a clip between 2 others?
Drag the clip to where the other 2 "join".
If you do it carefully, you will notice that the cursor arrow points right when you have it in the top half of the timeline and swivels to point down when you move it to the bottom half of the timeline.
To insert your new clip you must release it while the cursor is pointing right.
A bit more info:
When the arrow is pointing right, showing that you are about to insert the clip, the clip is displayed with a thick dark line around it.
If the arrow is pointing down, showing that it is going to over-write the underlying clip, the clip turns from blue to brown.
Message was edited by: Ian R. Brown
Similar Messages
-
Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.
Go to the Map, Background & Animatic Browser (last button in the centre tool bar alongside the Transition button). Drag the Black background (or any background) to your project. From an Event, drag the video selection directly onto the Black clip in the project. As you drop the video clip, a pop-up menu will appear. Select Picture in Picture.
Your video will appear as a small picture within the black clip. Click on it and reposition it to the centre of the viewer, using the yellow guide lines to get the exact centre position. Resize the Picture in Picture if desired by dragging the corner handles.
NOTE: You may need to extend the duration of the Black clip to match the duration of the video clip. Double-click on the Black clip to open the Inspector, then adjust the duration there.
John
Message was edited by: John Cogdell - added NOTE -
Why does my phone use data when hooked up to wifi in the middle of the night?
My phone and my husbands phone both get charged with data usage even though they are hooked up to a wifi in the middle of the night. It has all added up to and overage charge this month. We have never used this much data!
sandybenzi, that's a good observation. Have you downloaded 3rd party applications to your device? If so, applications can update periodically. You may access the Google play store application to verify if your applications are set up for automatic update.
For more device support, click http://vz.to/1kDL3MI
LasinaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Tty1-6 freeze in the middle of the boot process, tty7 and X works fine
I'm running Arch+KDE (and some alternative like xmonad as wm). I have the following strange problem:
Booting works fine, KDM starts, I can login, everythings works. However, although I can change to tty1-6 via ctrl+alt+f1...6 they are frozen in the middle of the boot process, here's exactly what I see after switching to another tty:
[ 2.733866] ata2.00: 78165360 sectors, multi 16: LBA48
[ 2.747003] ata2.00: configured for UDMA/100
[ 2.747223] scsi 1:0:0:0: Direct-Access ATA ST340014A 3.06 PQ: 0 ANSI: 5
[ 2.760075] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.771843] sd 1:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 2.772018] sd 1:0:0:0: [sda] Write Protect is off
[ 2.772098] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.772128] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.777708] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 2.777797] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.778630] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.785447] sda: sda1 sda2 sda3 sda4
[ 2.786061] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.885089] hub 1-1:1.0: USB hub found
[ 2.885518] hub 1-1:1.0: 4 ports detected
[ 2.993360] usb 1-2: new high speed USB device number 3 using ehci_hcd
[ 3.236962] usb 1-1.1: new full speed USB device number 5 using ehci_hcd
[ 3.384005] input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.3/input/input1
[ 3.384294] generic-usb 0003:046D:0A02.0001: input,hidraw0: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.7-1.1/input3
The next lines which are not shown are (via dmesg)
[ 3.384294] generic-usb 0003:046D:0A02.0001: input,hidraw0: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.7-1.1/input3
[ 3.390423] usbcore: registered new interface driver usbhid
[ 3.390511] usbhid: USB HID core driver
[ 3.393690] usb 1-1.3: new high speed USB device number 6 using ehci_hcd
[ 3.424849] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.840034] usb 3-1: new low speed USB device number 2 using uhci_hcd
[ 4.025136] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
[ 4.025381] generic-usb 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 5.739092] udevd[227]: starting version 171
[ 6.392169] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 6.392182] ACPI: Sleep Button [SLPB]
[ 6.392256] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.392262] ACPI: Power Button [PWRF]
[ 6.484257] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.486020] ACPI: acpi_idle registered with cpuidle
[ 6.567251] Linux agpgart interface v0.103
[ 6.589560] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.695744] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.711992] iTCO_vendor_support: vendor-support=0
[ 6.719428] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.720445] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[ 6.721211] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.722801] parport_pc 00:07: reported by Plug and Play ACPI
[ 6.722852] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.743621] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 6.743658] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 6.743755] agpgart-intel 0000:00:00.0: detected 1024K stolen memory
[ 6.744774] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xa0000000
[ 6.847264] ppdev: user-space parallel port driver
[ 6.852667] Intel 82802 RNG detected
[ 6.878022] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.923869] [drm] Initialized drm 1.1.0 20060810
[ 7.050148] i915 0000:00:02.0: enabling device (0000 -> 0003)
[ 7.050160] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.050168] i915 0000:00:02.0: setting latency timer to 64
[ 7.072268] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 7.072273] e100: Copyright(c) 1999-2006 Intel Corporation
[ 7.072344] e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.110870] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.110875] [drm] Driver supports precise vblank timestamp query.
[ 7.113855] i915 0000:00:02.0: BAR 6: can't assign [??? 0x00000000 flags 0x0] (bogus alignment)
[ 7.113859] [drm] failed to find VBIOS tables
[ 7.133720] e100 0000:01:08.0: PME# disabled
[ 7.140882] [drm] initialized overlay support
[ 7.141854] e100 0000:01:08.0: eth0: addr 0xfe9df000, irq 20, MAC addr 00:07:e9:4b:a9:8c
[ 7.178193] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
[ 7.181514] render error detected, EIR: 0x00000010
[ 7.181514] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[ 7.181514] render error detected, EIR: 0x00000010
[ 7.219489] No connectors reported connected with modes
[ 7.219497] [drm] Cannot find any crtc or sizes - going 1024x768
[ 7.237564] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 7.238588] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.299180] Console: switching to colour frame buffer device 128x48
[ 7.347619] fb0: inteldrmfb frame buffer device
[ 7.347623] drm: registered panic notifier
[ 7.347832] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.557756] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.557804] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 7.681210] nvidia: module license 'NVIDIA' taints kernel.
[ 7.681217] Disabling lock debugging due to kernel taint
[ 7.710730] Linux media interface: v0.10
[ 7.800616] usbcore: registered new interface driver uas
[ 7.877282] Linux video capture interface: v2.00
[ 7.930178] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0802)
[ 7.972100] input: UVC Camera (046d:0802) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.3/1-1.3:1.0/input/input6
[ 7.972388] usbcore: registered new interface driver uvcvideo
[ 7.972392] USB Video Class driver (v1.0.0)
[ 7.990026] intel8x0_measure_ac97_clock: measured 50989 usecs (2457 samples)
[ 7.990031] intel8x0: clocking to 48000
[ 8.093410] Initializing USB Mass Storage driver...
[ 8.100022] scsi4 : usb-storage 1-2:1.0
[ 8.103449] usbcore: registered new interface driver usb-storage
[ 8.103453] USB Mass Storage support registered.
[ 8.401795] usbcore: registered new interface driver snd-usb-audio
[ 8.568477] nvidia 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.568494] vgaarb: device changed decodes: PCI:0000:01:01.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.569407] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.30 Thu Apr 14 08:47:14 PDT 2011
[ 9.104388] scsi 4:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
[ 9.104713] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 9.105502] sd 4:0:0:0: [sdb] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 9.106381] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 9.106386] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 9.108519] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 9.108524] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 9.129321] sdb: sdb1 sdb2 sdb3 sdb4
[ 9.131752] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 9.131758] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 9.131762] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 10.662601] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 11.097052] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 11.412380] Adding 2104508k swap on /dev/sda2. Priority:-1 extents:1 across:2104508k
[ 14.876829] e100 0000:01:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 20.827578] NET: Registered protocol family 10
[ 31.203380] eth0: no IPv6 routers present
The curious thing is that everything works perfect in KDE, resp. tty7 ?!?what ever upgrade the software downloaded is the problem
You didn't mention this in your first post. Any idea what it was? Backups?
Besides that, this may be a fault in the video card, driver, or a screen fault.
Courtesy of BDAqua (if possible):
Take a screen shot & view that in Preview, move the Preview window around, if you see double lines it's a Video card/VRAM problem, if the lines do not move moving the pic around then it's the LCD or cable. -
Satellite M60-139: Split from button to the middle of the lid
Hello Forum-Friends and greetings from cologne/germany,
I hope I can describe my problem good enough to find help although my bad english ;-)
Yesterday I recognised a tore (in german it is called "Riss") in the lid (in german we say "Deckel") of my M60-139 notebook.
This tore grows from the opening-button ca. 3cm to the middle of the lid. If needed I can send you a picture ...
So my question is:
How can I open the LCD and the lid to glue the tore from inside with a very strong 2-component-epoxy to prevent the tore growing ?
Regards
Friedel
Any ideas or pictured disassembling manuals to: [email protected]Bluescream thats it ! Thanks to you and to the other members !
Your idea was quite good and as toshiba just sended me the hint to contact a toshiba service
shop (in south-germany as I live in cologne which is in nordrhein-westfalen) I came to the opinion to do it myself. Also I got no answer if this is a material problem and if toshiba will repair this for free ... Not very good !
So I tried your perfect description-link !
The bezel is just holded by 4 screws and the rest are just simple clips. The LCD-Frame is fixed with (I think it were) 4 screws too and I could reach the problem zone which was hidden under a kind of aluminium foliatec. Bending this foliatec away it was possible to glue the inner side of the tore with 2-component-epoxy-glue ! There is no problem with hidden or very difficult items - you can just see what to open and it is very logical.
Now (after this glueing-operation) it even looks damaged but I hope the tore will not grow up. The laptop works ... and I don't have to give it away to toshiba for month !
Thanks to all forum-members !
Greetings from cologne - Friedel -
i'm trying to order a book in iphoto. everytime it begins to upload, iphoto shuts down in the middle of the process. Whats the problem?
Hi TD,
Yes they do appear in full size and I can edit them. I've just realized that it's not just photos from the Net that are not appearing - it seems to be happening for all photos I've imported into iPhoto after a certain date.
After spending many more frustrating hours trying to work this out, I found that if I click all of the 'events' which contain the photos I'm after and then create a Book - all these photos appear in the selection window strip. However I still need to work out a proper solution as this still limits me to only those photos in the highlighted 'events' and no new pictures can be added to that particular Book.
Heeeelp please!
axiom303 -
Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7) I would really like to hear my songs all the way through, but I can't . I tried the "Convert Protected ACC files to Purchased ACC files fix" but it DIDN'T work. I don't know what to do. It does it when I transfer the music onto my Classic too.
What do you mean "doesn't recognize"?
-
Leaving Action executed in the Middle Of the Payroll Period
Dear All,
I am Trying to execute Leaving action For the Employee in the middle of the Payroll period thereby changing his Employee Group to Pensioner and also his payroll area to that of Pensioner.However the System is not allowing me to do so and is saying that Payroll area cannot be changed in the middle Of the Payroll Period.Plz Suggest what can be done so that the Leaving action Of the Employee can be executed in the Middle of the Payroll Period.
Thanks
Punam JhaHi,
In a payroll period, you can not include the same employee in two different payroll processing. Hence, you can assign the new payroll area at the beginning of the next payroll period. Alternatively, execute the separation action with the last date of the pay period.
regards
Mohan M
Edited by: M Mohan on Dec 21, 2009 2:34 PM -
Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help
Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!
-
My Radio on my Nano won't pick up a signal.. I cennected my headphones and am in the middle of the city, so there are plenty of stations to find. Also my iPod keeps pausing every like 30 seconds when I try to listen to my music. I just got it for Christmas and already loaded it with songs.. What do I do?
Push the headphone jack all the way in, you don't have it fully plugged in yet.
-
I cannot find a way to enable my child's iPad to require a passcode only at certain times of the day.
Yes I have used the clock/timer/ countdown - great to restrict how many minutes of iPad usage they get a day.
But as my child requires the iPad in school for class lessons the usage at school varies maybe 30 mins 1 day and a few hrs on other days
I want the ability to say set the iPad to not work between say 7pm and 7am, ( unless a passcode is entered) so my child isn't playing games on it in the middle of the night...
Apple I cannot see anything in the settings that performs this function
HelpYou can Remote Lock his iPad with Find My iPad using a computer at whatever time you like.
http://support.apple.com/kb/PH2700
Note: The iPad may be disabled if he tries the passcode too many times. -
Is there a way to force my iPad to shut down? I "slid" to turn off three hours ago. The "wheel" is still spinning in the middle of the screen.
Yeah, hold down the top Sleep button and the Home button simultaneously. Continue to hold until the screen goes blank and the Apple logo appears. Ignore the red slider midway through this process, just keep holding both buttons down until the Apple logo appears -- it takes about 8-10 seconds. That should do a soft reset and fix your problem.
-
ok im in need of some help i had just bought a brand new ipod touch from walmart and when i got it home i was trying to cope with all the new things on it and i was just fooling around like figuring where things where at and i put a passcode on my ipod and i must of not typed it in right and now my ipods disabled because i tryed to many times and im at my tenth time and i misspelled it obvi and now i need help i plugged it into intunes put it into recovrey mode and then restored it and it stopped in the middle of the restore mode and now it wont finish and im still locked out of my ipod and i need help i mean i just got it and it would be nice if anyone knew that could help me.???? please i cannot figure this out and usually i am very good at ipods and stuff but this time i am stummped and i dont want to call apple to hasel anyone ...anything thats helpful im grateful to hear thanks soo much
-Kara :/Follow the instructions to the letter here > iPhone and iPod touch: Unable to update or restore
-
I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
Can anyone tell me how to fix my iPod.I was updating it and I turned it off in the middle of the update. I tried to put it through a recovery on the iTunes but it keeps giving me 3194.When I turn it on it will go to a light blue screen.
See the action for that error included here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
How can I see my document in the middle of the page ?
Hi everyone,
I just downloaded the trial of i-Work but I'm in trouble with Pages. Indeed I would like to see my white document, on which I'm writting, in the middle of my page. At the moment it is on the left, with grey on the right.
And : 1- I don't want to have the whole page in white, that's to say I don't want to zoom in. 2- I don't want neither to put Pages'09 in the middle of my screen, surrounded by my background. 3- I don't want to use the full screen mode all the time. Actually, this is quite simple : I would like to have a presentation similar to Word (not because I can't forget Word, just because I feel more concentrated with this kind of presentation )
I checked the user's manual, and I couldn't find the solution. So could someone help me ? Is it possible to have the page of our document in the middle of the Pages' screen ?Sorry if I seem picky but I believe using the right words makes it easier to communicate. The document isn't showing in a page. The document page is in a window. The page is placed to the top and to the left in the window.
I also would like to have more space in the window on all the sides of the page. We can ask for it using this link: _http://www.apple.com/feedback/pages.html_
Maybe you are looking for
-
Hello, I am developing an application with the apex. I created a section where you can upload files to the linux file system to a specific folder, not upload to the database, I do not want me to take unnecessary space. I can also download the file li
-
Ios 6.1.3 is awesome but why it is slow man ?
moji
-
HT4168 Why am I missing some photos when I go to epub?
I am trying to convert a pages document to epub and I am losing 3 or 4 photos but keeping many others. I have tried to reinsert photos, float and re-insert them in line with no success.
-
Business Catalyst will not open in CS6
I am just about frustrated with trying to get BC opened up in CS6. I have a x64 Windows 8 operating system and have CS6 Dreamweaver installed. When it opens, I click under "Create New" Business Catalyst Site.... Once I do that a dialogue box opens up
-
Dear all, After the application of SP10 TM 110, the system is raising a dump when selecting the tab Cargo Management in a Ocean Freight Booking. It seems like attribute CONT_CNT_VAL_AQ_CA is missing after the SP upgrade. I havent found any note about