Adding a disclaimer to every vi in a project.
I need to add a limited rights disclaimer to every vi in a project. Is there a method to add the text in the documentation field to all the vi's in a project?
Is there a better method to do this?
Thanks.
Solved!
Go to Solution.
Try this.
Attachments:
Add_Dis.llb 60 KB
Similar Messages
-
Good Morning,
We are getting ready to move our C370 into production and one of the last items that we need to look at is the Disclaimer.
We have figured out how to add our Disclaimer to every e-mail going out, but here's what we would like to do. Currently with PMDF, our current mail gateway, we have the ability to check to see if a disclaimer has already been added to an outbound e-mail. If it exists, we do not add it again. I don't see where I can do that with the C370.
Is this something that can be done and if so, how?
Thanks in advance,
DougViquar,
I used an IP from our Relaylist. I have saved the file in a .pdf so that you can "blow it up".
Doug
Screen shot:
Logged in as: admin on greeneye.emcins.com
Options
Account
Change Password
Log Out
Help and Support
Help
Online Help
Support Portal
New in this Release
Technical Support
Open a Support Case
Remote Access
Packet Capture
Monitor
Reports
Overview
Incoming Mail
Outgoing Destinations
Outgoing Senders
Delivery Status
Internal Users
DLP Incidents
Content Filters
Virus Outbreaks
Virus Types
TLS Connections
System Capacity
System Status
Scheduled Reports
Archived Reports
Quarantines
Message Tracking
Mail Policies
Email Security Manager
Incoming Mail Policies
Incoming Content Filters
Outgoing Mail Policies
Outgoing Content Filters
Host Access Table (HAT)
HAT Overview
Mail Flow Policies
Exception Table
Recipient Access Table (RAT)
Destination Controls
Bounce Verification
Data Loss Prevention (DLP)
DLP Policy Manager
Domain Keys
Domain Profiles
Signing Keys
Text Resources
Dictionaries
Security Services
Anti-Spam
IronPort Anti-Spam
Anti-Virus
Sophos
McAfee
Data Loss Prevention
RSA Email DLP
IronPort Email Encryption
IronPort Image Analysis
Virus Outbreak Filters
SenderBase
Monitoring Services
Reporting
Message Tracking
External Spam Quarantine
Service Updates
Network
System Administration
Trace
Alerts
LDAP
Log Subscriptions
Return Addresses
Network Access
Users
Network Access
System Time
Time Zone
Time Settings
Configuration File
Feature Keys
Feature Key Settings
Feature Keys
Shutdown/Suspend
Upgrades
System Upgrade
System Setup
System Setup Wizard
Next Steps
Trace
Trace Results
Host Access Table Processing (Listener: OutboundMail)
Fully Qualified Domain Name:
Unknown Host
Matched On:
172.22.0.3
Sender Group:
RELAYLIST
Named Policy:
RELAYED
Connection Behavior:
RELAY
SenderBase Network Owner ID:
N/A
SenderBase Reputation Score:
N/A
Policy Parameters:
Max. Messages Per Connection:
10,000
Max. Recipients Per Message:
100,000
Max. Message Size:
20M
Max. Concurrent Connection From a Single IP:
600
Use TLS:
Preferred
Accept Untagged bounces:
Yes
Max. Recipients Per Hour:
Unlimited
Use SenderBase:
No
Use Spam Detection:
No
Use Virus Detection:
Yes
Envelope Sender Processing
Envelope Sender: [email protected]
Default Domain Processing:
No Change
Envelope Recipient Processing
Envelope Recipient: [email protected]
LDAP Accept Lookup:
Result: not performed
Default Domain Processing:
No Change
Domain Map Processing:
No Change
Alias Expansion:
No Change
Message Processing
Assigned Virtual Gateway:
None
Assigned Bounce Profile:
None
Domain Masquerading
No changes
Filter Processing
Encrypt_Messages_with_subject_string
Rule: recv-listener == "OutboundMail": True
Rule: subject == "(?i)^\\$C\\$": False
Rule: AND: False
no_duplicate_disclaimer
Rule: sendergroup == "RELAYLIST": True
Evaluating Nested Filter:
Rule: body-contains("EMC071856", 1): True
Rule: NOT: False
Mail Policy Processing: Outbound (matched on policy DEFAULT)
Message going to:
[email protected]
End-User Safelist/Blocklist Processing
Result:
Not Evaluated
Anti-Spam Processing
Evaluation:
Not Evaluated
Anti-Virus Processing
Evaluation:
No Viruses Detected
Elapsed Time: 0.003 sec
Actions Taken:
Delivered
Virus Outbreak Filters Processing
Evaluation:
Not Evaluated
Data Loss Prevention Processing
Result:
Not Evaluated
Disclaimer(s) Added
Above Message:
No changes
Below Message:
EMC_Disclaimer
DomainKeys Signing
Result of DomainKeys processing:
DomainKeys signing is not enabled in this listener's HAT
DKIM Signing
Result of DKIM processing:
DomainKeys signing is not enabled in this listener's HAT
DKIM Verification
Result of DKIM Verification processing:
DKIM verification not enabled in this listener's HAT
SPF Verification
Result of SPF Verification processing:
SPF verification not enabled in this listener's HAT
Message Delivery (matched on policy DEFAULT)
Final Envelope Sender:
[email protected]
Final Recipients:
[email protected]
Final Message:
Message-Id: <0383be$@OutboundMail>
Date: 08 Feb 2011 08:21:18 -0600
Received: from unknown ([172.22.0.3])
by mail-ir-int.emcins.com with TEST; 08 Feb 2011 08:21:18 -0600
Subject: Test of Disclaimer if Disclaimer exist
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="us-ascii"
Test to see if disclaimer doesn't get added.
Doug
EMC071856
NOTICE: This message (including any attachments) is intended for a specific
individual and may contain information that is either confidential or legally
protected. If you believe that it has been sent to you in error, please reply
to the sender that you have received the message in error, then delete it.
If you are not the intended recipient, you are hereby notified that any
retention, dissemination, distribution, or copying of this communication is
strictly prohibited. Thank you. EMC071856
Copyright © 2003-2010 Cisco Systems, Inc. All rights reserved. -
Revision: 5811
Author: [email protected]
Date: 2009-03-31 11:20:19 -0700 (Tue, 31 Mar 2009)
Log Message:
Adding a Flex Builder Flash-Integration and Utilities project to make these files easier for people to work on. Flash-Integration is really an intermediate swc that Utilities uses. I've also modified the existing Flex Builder project for flex4tests to build against this new utilities project directly.
Also change the way FlashIntegration is built--we no longer have a manifest file and just include-classes FlashIntegrationClasses.as.
QE Notes: -
Doc Notes: -
Bugs: -
Reviewer: Evtim
tests: -
Modified Paths:
flex/sdk/trunk/development/eclipse/flex/flex4test/.actionScriptProperties
flex/sdk/trunk/frameworks/projects/flash-integration/build.xml
Added Paths:
flex/sdk/trunk/development/eclipse/flex/flash-integration/
flex/sdk/trunk/development/eclipse/flex/flash-integration/.actionScriptProperties
flex/sdk/trunk/development/eclipse/flex/flash-integration/.flexLibProperties
flex/sdk/trunk/development/eclipse/flex/flash-integration/.project
flex/sdk/trunk/development/eclipse/flex/utilities/
flex/sdk/trunk/development/eclipse/flex/utilities/.actionScriptProperties
flex/sdk/trunk/development/eclipse/flex/utilities/.flexLibProperties
flex/sdk/trunk/development/eclipse/flex/utilities/.project
flex/sdk/trunk/frameworks/projects/flash-integration/src/FlashIntegrationClasses.as
Removed Paths:
flex/sdk/trunk/frameworks/projects/flash-integration/manifest.xmlThats good news.
-
My laptop, iPad, and iPhone are being clogged by repeated iCal alerts. Every time an event is added, it seems another Calendar is also added. When I view the Calendar list in iCal, there are over 100...and the number is growing. They can not be deleted with a simple "Select all" or "Delete All" and, when deleted individually, the list quickly grows to huge numbers again rapidly. How do I keep this from happening and eliminate the excessive number of calendars?
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
Hi 1st time asking a ?. Like my ? above. I have been using firefox for a long time and never had a problem that's why its my !st time asking a ?'s here. I'm using windows 8.1 Lenovo laptop and this has just started 4 days ago. I shut down firefox and the next day I started laptop and opened firefox and I noticed every extension I had set up were all gone from browser and the get extensions page were all gone in the get more extensions add on page area. So I re added all of them to set up the browser the way I liked for years and it worked OK. Then when I re-started the computer and they were all gone again? Its driving me crazy why this is happening. And I do have the latest firefox. I even uninstalled browser and re add them all Ext's and then on next start up were all gone again.
And the reason its my 1st time asking a ?'s is because to help others, I am a 56 year old & I'm a 100% disabled army Vet. and I don't know enough about fixing my own computer problems to help any 1 else asking to help them fix any thing.
OH theres 1 more thing, every time I have to re-install the Ext's and when I turn off laptop and turn back on then re add the Ext's again I noticed in Ccleaner in the firefox tab all of the Ext's that are gone from the browser are all there and I can not delete them either in Ccleaner! Please explain in easy to follow steps how to fix this so I can use firefox again? Thanks for any and all help?It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the extensions.* files (e.g. extensions.json, extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end of the Search bar to check if there is a compatibility update available.
There is software like Advanced SystemCare with its Surfing Protection feature that can protect files in the Firefox profile folder against changes.
If you have such software then check the settings or uninstall this software.
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/ -
Keyboard in Arabic is added for no reason every ti...
Hi,
I own a Lumia 930, bought it in France (via Darty - so it's unlocked). I run it in English UI.
For some reason, every time I restart my phone (i.e. when battery dies and I turn it on again) - A keyboard in Arabic is being added to my keyboards list. I remove it every time, but it pops right back up on the next reset.
It's important to mention, that I don't have any connection to anything Arabic, so I have no idea what is causing this keyboard to keep being added.
Any help, please?? This is all so very annoying...I suspect Arabic is one of the default keyboard languages available on France-spec Lumias, along with English and French. I have a Middle East-spec Lumia 820, and French was among the languages that came preloaded with the device. Since the keyboard is already in the device, a reset might be causing it to go back to default settings and show the Arabic keyboard as well.
Either way, I don't imagine this is very much of an annoyance, unless the phone keeps reverting to Arabic as the default keyboard language. If that's the case, you might have to hard-reset the phone. -
Adding a logo to every slide in my presentation in Keynote '09
I can't seem to figure out how to add a logo to each slide automatically something like a slide number is added automatically when the proper selections are set. The item I would like on each slide is a four letter logo on the lower left corner of each slide.
Are you putting your logo directly on to the slide, or are you putting it on the MASTER SLIDES? On the left side of the display (below New, Play and perhaps Skip) you should have 2 stacked, vertical columns titled Master Slides and Slides. If you only see Slides, then grab the handle to the right of the title and drag it down to find your Master Slides. Open each of the masters and copy and paste your logo on to them. Now it will appear on every slide.
-
Adding a script to every topic in an existing WebHelp project
I've got WebHelp (RH8, but could upgrade if necessary) running on Apache.
What are my options for adding a script (probably PHP) to every topic?
In the past, with other HATs, I've put stuff like that in master pages and in skins.
From a comment in http://forums.adobe.com/message/3939811 I get the impression that nothing I do to a master page will affect existing topics?
How about skins?
Any other options besides running a script to make global changes to the source files or output files?
Obviously if I define the script globally I'd need to use variables or replaceable parameters or the like in the script to customize it for each page. Is Robo helpful for that or should I be looking to the Apache environment for those values?Hi there
Okay... Master Pages... Topic Templates... They are essentially the same thing. RoboHelp 8 began calling them Master Pages.
For starters, do we want to use Master Pages to create new topics with? Or do we want to define something inside the Master Page and apply it to existing topics?
My assumption is that you already have topics and simply wish to associate a Master Page with them.
When you define a Master Page in RoboHelp 8 or 9, it will contain a Body placeholder. Whatever is inside the Body placeholder will end up being copied into any new topics you create that use the Master Page. But that's where it ends with stuff in the Body placeholder. After you create the topic, changes to the Body placeholder inside the Master Page *ARE NOT POPULATED* into the topics created from the Master Page. So you may change the Master Page substantially and the topics associated with it will remain unaffected.
Note that you may also use a Master Page to populate Headers and Footers across existing topics. You have to do this by editing the Master Page and clicking View > Header or View > Footer in order to bring them into view. And once you do this, you may populate them with information. And using Master Pages in this fashion *DOES* allow subsequent changes to the Master Page to be populated across all topics associated with the Master Page.
The problem here is this. You are wanting to use the latter feature to populate additional content across topics. So far so good. But you also have a need to make that content customized to each topic, no? And if that's the case, you won't be able to use Master Pages to maintain that content. I suppose you might put it in a Master Page initially just to get the code copied to all topics. But when you make changes to it to individualize it on a per topic basis, RoboHelp will pop up a warning advising the topic content is different and it will ask you what you want to do. Update the Master Page so ALL topics associated see the changed code? Or disconnect from the Master Page and leave your changes as you wish inside the topic.
Another issue with this is that based on your other post, you need some PHP code above the topic content in a place that occurs before the HTML page is even defined. And that one may prove tricksy to implement. I suppose you might use what I suggested earlier to get the code in the topic, but you will still need to carefully hand edit each topic and move the code to where it should go.
Hopefully this was helpful... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
Adding a rectangle behind every piece of text in CS5
Hi,
I am making a series of map tiles (30) and would like to have a white rectangle behind every peice of black text in a certain layer. I know how to add a rectangle and position it behind the text, but want to avoid this repetive process.
I understand that each piece of text has a 'bounding box' - is there a way to add a fill to this box for all text at once?
Thanks,
Mike.Mike,
You may:
1) Select all the instances of Type,
2) In the Appearance palette flyout tick Add New Fill, drag it down below Characters, and change its colour to white,
3) With the white Fill selected, Effect>Convert to Shape with the desired oversize.
Edit: Once again, hi Kurt. -
Adding "home" button to every slide
I have a 50+ slide Captivate document and I'd like to add a
"home" button on every slide without having to paste it into every
one. Any way to do this? Is there a master slide or something I can
add it to and have it appear on all?
Thanks!Hi wfz and welcome to our community!
Unfortunately you don't have a lot of choice in placement of
these beasties. So you either use what you have or develop a
workaround. I'm thinking you will perhaps need to insert a button
object on each slide that is labeled "Home" and points to the
appropriate slide.
You should also consider submitting a WishForm asking the
developers to provide us more flexibility in placing the existing
menu. You may do this by
clicking
here and completing the forum you should find there.
Cheers... Rick -
Need help in adding a disclaimer page for guest users
We are trying to add a disclaimer page for public users to accept and continue for our public WLAN. Need to know how to add this page, and if there is a character liimit?
Go to Security -> Web Auth -> Web Login Page
Don't forget to enable Web Auth:
WLAN -> Guest LAN -> Security -> Layer 3 -> Web Policy
Is this what you are looking for? -
Adding a Disclaimer Page in Portal while logging on.
Hello All,
I have a requirement where an authenticated user logging for the first time will get to see a disclaimer page. Once the user accepts, he should be directed to the Portal content as usual and if he does not accept then the user will log off from the Portal.
Second time when he logs in there will be no disclaimer page for those who have accepted it.
Please can you help me and guide me through the possibilities.
Thanks
AvikThe way i see it is either to have a db table, which is not a viable solution.
The other way, create a role ABC, do not assign that role to any user with Entry Point NO
When the user logs in, check for the role, if the role is not available, assign the role, and show him the disclaimer page,
On accept of the disclaimer, navigate to Home page of the portal
On Decline, call the logon module to logoff
Next time if the same user logs in, check for the roles, if it has the role ABC, navigate directly to Home Page.
I am not sure if there is any standard way to do it.
Cheers and good luck.
Regards,
Nitin -
FCE is adding an extra frame every 4 or 5 frames...
...when I render in the timeline. Makes exported final look choppy. Origional material 7.AVI
>Origional material 7.AVI
What the heck is 7.AVI??
Check to make sure the clip's setting match your Sequence settings in FCE. If they don't match exactly (including frame rate), convert the files so they do match THEN import the new files for editing.
-DH -
Colored flags for every item in the project explorer
Hi all!
A potential new feature?...
Currently we are not able to give a VI or an other element in the project explorer a flag to indicate it's working status. The easiest way is to show a flag or a checkbox in the row of the item. The flag should be in user defined colors.
This would be very helpful to set up drivers from a template, or in every case we have to update a project.
To simple to implement?
Please vote to change the world ;o)
Best regards,
M.Stok... added to idea exchange
-
Adding tabs to View based application in mobile project
Hi,
I wanted to if tabs can be added to a view based (ViewNavigatorApplication) ? I need tabs few of my views also tabs will be different in different views.
If using TabbedNavigatorApplication is the only option how do I create a first view without tabs and different tabs in different section of the application.on what page of the app (P-Track, right?)... I assume you desire to see them listed in the project details, page 200? If so, the source for the query for that region has a where clause hard-coded for m.milestone_status='Open' ... removing it would get what you want there (they will still be color coded). I've modified this application extensively such that I have an actual control on the region(s) to allow the user to choose "open/all" (for milestones and actions)
Otherwise, you can adjust the search filter 'status' option on page 35 to 'all' (the default is 'open') and click go.. (and/or add a new list option in that control for 'closed'..)
does that help?
Maybe you are looking for
-
Importing text file into database
Hi again, Could anyone give me any pointers on how to take a text file or csv file (or any other delimeted text file) and read the contents into java and then use the read in data to then insert the delimeted data into the table. i assume i have to r
-
Default text size in Compressor is too small for normal human eye
Is there any way to change the text size in Compressor 4 in the windows? I can't find any. The normal default text size is way too small for any normal human being eye to read clearly. Please, have mercy on us, whoever designed the tiny fonts! No
-
What do I do with my laptop when the shutdown keeps popping on the screen?
What do I do with my laptop when the shutdown keeps popping on the screen?
-
Elements 4. Why can`t I upload from cardreader
Since downloading SP3 for Windows XP I cannot upload photos from my cardreader. The thumbnails appear on the Elements download screen but when I click "get photos" a message says "Photoshop cannot get photos from this device, check your connections.
-
Can't print from IndesignCS2 since upgrade to Leopard
Like it says in the title, since I got upgraded to Leopard, my Epson Stylus Photo 1400 printer won't print correctly from Indesign. If I set a job to print, the top 1" or so (on A4 pages) is cropped off, with a corresponding strip of white at the bot