Adding a DVI port onto my Imac

I want to to display another computer onto my imac. It only has a mini dvi out. Is there a way to install a dvi in port??

jessylee13 wrote:
Is there a way to install a dvi in port??
For all practical purposes, NO.
The LCD panel is driven by LVDS signals, while DVI uses TMDS signals.
So, you'd have to add TMDS receiver chips and LVDS driver chips, plus
whatever logic might be required to convert from one to the other. The
conversion is non-trivial; a monitor is much more than an LCD panel.
You'd also have to add video switching to select between internal and
external sources.
Looby

Similar Messages

I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use?

I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use? My 2006 iMAC is showing it's age but I figure I can use it as just a monitor just fine. Assuming I can connect the two together.

That older iMac isn't designed to receive video input through the mini-DVI connection. Only certain newer iMacs are able to be used as displays.
Your only options are to use something like ScreenRecycler mentioned above.
~Lyssa

Adding an esata port on new iMac?

Is there a way to add an esata port to the new model iMac?

OWC has offered this in the past, but I don't think it's possible with the new model iMacs, they way the teardown would have to be done.
On the other hand, with Thunderbolt on the new iMacs, why bother with eSATA?

Mini-DVI port not working: wear and tear?

I had been happily using the mini-DVI port to play content on TV, using a DVI to Video adapter : plugging and unplugging probably twice a week.
Now it seems to have stopped, abruptly: no signal at all is reaching the TV. (Adapter still works fine on my MacBook.)
What are the chances of wear and tear damaging the DVI port? Is this a complicated fix? Any other thoughts? No recent upgrades or updates.
"About this Mac" reckons it's mirroring fine, so it feels like a hardware thing. Many thanks in advance.

Hello ewfelton
It is very possible that the DVI port on the iMac has been damaged from wear and tear, as it's harder to get at than the MacBook.
I would disconnect everything from the iMac, grab a clean towel and turn it face down on the desk. Then with a magnifying glass and light inspect the DVI port for a broken or bent pin. In the process of inspecting the port your SMC will also be reset, follow the instruction for "How to reset the System Management Controller" when your done.
If the port seems OK and the SMC reset doesn't get it going use Disk Utility to Repair Disk Premissions and try it again.
Your local Apple Store or local Apple Service Provider can replace a bad or damaged DVI port.
Dennis

I cant record a mix onto my imac using my headphone port? Any ideas?

Im trying to record a mix onto my Imac using the headphone port....i was hoping that the line in button would be there but its not....
Can someone help?

if apple headset for ios devices works with macs also for input then it's because the non std. way of adding input into the minijack std which officially support no input only output is not wired with the cable you are trying to connect you can likely buy a converter or cannibalise a iphone headset and makeyour own
link to apple headset pinout
here is the pin out
http://pinouts.ru/HeadsetsHeadphones/iphone_headphone_pinout.shtml

Recently I bought a mini DVI to HDMI converter from eBay for my iMac 21.5 Mid 2011, but only later I realised that it does not have the mini DVI port in that. How can I connect my iMac to a LG smart TV through a HDMI cable?

This is the picture of all the ports from my iMac
This is the mini DVI to HDMI converter which I bought from ebay. And I have the HDMI cable to connect it to my TV
Could anyone please suggest me a solution how I could connect my iMac to the LG smart TV? Also I need to know if this transmits the audio as well to the smart TV?
Suggestions are welcomed. I really appreciate and thank you for your time

I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404

HT4951 Can i use a Thunder bolt display with an iMac from the mid 2009 ? Would it work if connected to a mini dvi port in a scaled down mode or is it compulsory to have a thunder bolt port ?

I have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port.
Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port ?
I thought it would be better going for a thunderbolt display monitor rather than the older version, so when i upgrade my machine in the future it stays compatible.

I have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port.
Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port ?
No. A TB display can only be connected to a TB source.
Confusing Mini DisplayPort with Thunderbolt
As indicated in that artical a displayport device can be connected to a TB source. But that is not your situation.

External video projector - How can I hook up my Mini DisplayPort to DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?

Hi
How can I hook up my DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?
Is there a DVI adaptor already for Thunderbolt?
Thanks,
JFR

The Mini Display port and Thunderbolt port use compatible connector bodies. Your current Mini Display to DVI or VGA adapter will still work as before on the newer Thunderbolt capable machines.

What is the latest, older model iMac that has a DVI port. I do not want a Mini-Display Port

I want to use an iMac for my seminar. My projector only accepts VGA connections. I currently use my MacBook Pro using a cable that has DVI Male on one end and VGA Male on the other. I can't get a Mini-Display to VGA adapter.
What is the latest, older iMac that I can buy that has a DVI-D output? All the new models at the Apple Store have Mini-Display ports only.
Thank you.
www.ImagineThatToo.Org

The Early 2008 iMacs were the last models with DVI output. They have a mini-DVI port.
However, Apple sells mini-DisplayPort to VGA adapters, as do 3rd party developers.
http://store.apple.com/us/product/MB572Z/A#overview

Is that actually a mini-DVI port on my G5 iMac?

So I can't seem to figure this out...
Is the Mini-DVI connector on the back of the G5 iMac (2 GHz, pre-camera or remote) a jack (male) or a port (female)? I bought one of the Apple mini-dvi -> S-Video & RCA adapter cables, but the mini-DVI end seems to be identical to the machine's connector, and thus they won't mate. Did I just buy the wrong adapter? I doubt this because Apple would have no reason to even make such an adapter, as all its models of computer should have the same sex of plug built-in, and thus no need for a choice between mini-DVI (M) -> whatever versus mini-DVI (F) -> whatever.
Any help or advice?
The mini-DVI connector on the cable has a rectangular metal rim with rounded corners on the bottom. Inside that is a C-shaped (like 3 sides of a long, low rectangle) plastic element with 8 axially parallel contacts on each of: the outside of the top of the C; the inside of the top "..."; the inside of the bottom "..."; and the outside of the bottom "..."; this totals 32 contacts.
This doesn't appear to work with the port on the iMac. The whole in the machine's external frame doesn't immediately contact the outer metal rim of the jack; it appears there's enough space for the sleeve of the connecting plug to slide in betweeen them. Also, the rim seems slightly more rounded/angled than that of the adapter above. Thirdly, the plastic center element is a wide, low rectangle with barely rounded/angled bottom corners (4-sided versus the adapter's 3-sided/C-shpaed central plastic element). Lastly, there are 14 (not 32) contacts in a staggered (not axially parallel) layout which only exist on the inside (not the inside and outside) of the center plastic element.
So what's the story? Do I actually have a mini-VGA port (as in some of the laptops which were advertised as having a mini-DVI port but which were actually mini-VGA)?
Help! I need to get split screens going to start building the audio>visual>audio interface I need for a major installation/performance piece I'm working on.
Thanks,
RealJake

Real, Welcome to the discussion area!
Sorry to douse your enthusiasm but that is NOT a mini-DVI connector. It is a mini-VGA connector.

Can I use a 2009 iMac as external display for 2007 macbook pro with DVI port only

I have a late 2009 imac with minidisplay port and a 2007 macbook pro with DVI port. I connected a mini diaplay port to DVI cable but all I get on the imac is a blank screen when I press F2. Can I use the imac this way?

I'm not sure if it works with DVI but your late 2009 must be a 27". Try Command-F2 or Copmmand-Fn-F2

Is it possible to input itunes into DVI/HDCP input from imac with Apple mini display portS?

Is it possible to input itunes into DVI/HDCP input from imac with Apple mini display port? Or is there another way?

The problem with itunes is needing a computer running it. or continuous internet connection.
A Time Capsule is AC mains powered.. no battery. Although you can certainly buy an older Gen4 TC and modify it ...
https://sites.google.com/site/lapastenague/time-capsule-power-supply-repair-kits
I have run my TC on a 12V SLA battery.. which would neatly meet that part of the functionality you want. But it is heavy and not really the rugged sort of device I think you want.
But I would look at other media players and other ways of storing movies than iTunes.. if you want to carry the whole lot around with you .. A bunch of SD cards even you could plug into the ipad??
External storage for iPad?
A small cheap PC/Mac laptop with a 1TB hard disk in it.. and 11" or 13" screen.. can often be a much better solution than lugging around multiple items so you can fit Apple devices into your life.

HT1296 My drive failed on my iMac and I had to get a new drive but now my iTunes music is gone including all the CD's I added to iTunes, and all of my custom Playlists. All of that stuff is still on my iPhone 4, but how do I get it all onto my iMac again?

My drive failed on my iMac and I had to get a new drive but now my iTunes music is gone including all the CD's I added to iTunes, and all of my custom Playlists. All of that stuff is still on my iPhone 4, but how do I get it all onto my iMac again? I have CD's on my phone that i no longer have the physical copies of so i can't just re-download them all, plus it would take forever! I just want to know if there is a way to get all of what is still on my phone, back over to my iMac with it's new drive and restore my full iTunes library to the iMac with playlists, CD downloaded music, and my iTunes bought stuff, so i can go back to synching the 2 devices without losing everything that's on my phone that used to be on both devices?

iTunes Store- Transferring purchases from iOS device or iPod to a computer
Downloading past purchases from the App Store, iBookstore, and iTunes Store
How to dowload purchased music

Trying to play movie thru mini DVI port - display keeps switching back to desktop(?)

I'm not able to play a movie continously to my TV through the dvi port (via hdmi cable) using display mirroring. Picture shows up OK, but after the movie runs a very short time attention shifts back to the iTunes control screen. I've successfully mirrored the display on a TV before, but not tried to play a movie until now. After messing with all the perturbations for a couple of hours, now I can't even get the picture to show up, though everything appears to be acting the same as it was. The movie plays fine on the computer w/o mirroring. I've also tried copying the movie onto my iPad and running the movie from it, but get a message that it's not legal to do so (movie bought via iTunes downloaded onto the iMac (2008; 20-inch; 2.4GHz).

Drag applications from your main desktop off the right side of the screen and they will appear on the TV. This is the extended desktop mode.
Regards,
Captfred

Does the mini DVI port cary audio if using a Mini-DVI to HDMI Adapter?

Hello everyone,
I've heard it is possible for a DVI port to transmit audio data to a HDMI connection if a DVI to HDMI cable is used, which will allow the sending of both audio and video to your TV. see: http://en.wikipedia.org/wiki/DigitalVisualInterface
I'm assuming this is not possible using apples mini DVI port, but just wanted to check to make sure. My main goal is to get surround sound out of my powerbook. To do this by simply adding a Mini-DVI to HDMI Adapter would be GREAT!

Hi Jonathan,
I'm assuming this is not possible using apples mini DVI port
Yup, no audio, unfortunately. The audio will have to transmitted separately via the analog audio output.
Yang

Adding a DVI port onto my Imac

Similar Messages

Maybe you are looking for