Adding a external display

Is it possible to hook up a external monitor and close the powerbook and just use the external monitor?
Thanks

Click here for information.
(45563)

Similar Messages

  • Incorrect resolution displayed on mavericks external display 1080p

    hi.  i am running mavericks on imac (intel, amd radeon HD6970 1024mb) and have just added an external display (asus VN279) which i've tried connecting through both mini displayport to displayport and then mini displayport to hdmi.  when i select the resolution i have an option for 1080p which is the native resolution of the monitor (and the one that i want to run), however, the resolution that actually comes on the screen is terrible and a totally different and lower one. any ideas on what could be wrong?
    thanks
    bruno

    Hi,
    Try to change the HDMI cable. I did display (X1 Carbon 20A7) 4K (3840 x 2160) on TCL (U49S7606DS) using very old but original Panasonic Viera HDMI 1.3a cable. I know it is strange and should not work but it works.
    BTW: Here is what Lenovo officially says for the second generation of X1:
    Graphics    Intel HD Graphics 4400 or 5000 in processor,
    external digital monitor support via Mini DisplayPort or HDMI (supports VGA analog monitor via Mini DisplayPort to VGA Monitor Cable); supports three independent displays;
    Max external resolution:
     3840x2160 (Mini DisplayPort)@30Hz;
     2880x1620 (HDMI)@60Hz
    Cheers,
    a

  • Ongoing fatal crash and security bug related to connecting external display

    The infrastructures in OS X to resume from sleep, to authenticate, and to change displays is fundamentally not working.
    The security bug I have encountered has to do with connecting a cinema display exclusively to a MacBook Pro. This is a specific situation, but please note that I have experienced the same problem on no fewer than three independent laptop. Plus, the Genius in the Apple Retail Store was convinced of the general instability of this infrastructure. The security problem is that hot corners no longer function if I transition between two states in the same reboot. The first state is where I have the laptop powered on and using its own internal display exclusively (when I'm on the road). The second state is when I have the laptop displaying its output exclusively on an external display (when I'm at home). What happens is that an attempt to use hot corners fails. There is no response. I even added configuration on all four corners (whereas I originally had settings only for the rightmost corners), and even then, the hot corner action (of sleeping the display or entering locked screen saver mode) does not commence. This prevents the user from being able to secure the display on demand using standard methods that are supposed to work.
    The instability level related to connecting the external display exclusively is high. Again, I've experienced this on no fewer than three independent laptops, and the Apple Genius at the Retail Store confirmed that this aspect of OS X did not work consistently. When I want to connect the cinema display to the laptop in such a way that the laptop's own display is not part of the active screen, the process I use succeeds about half the time. Supposing I have been on the road, where I am using the laptop display exclusively. I then put the laptop to sleep. When I return home with the lid open, I connect first the USB (power) from the cinema display to the laptop, and then I connect the Mini DisplayPort. When that step works, what happens is that the login screen shows on the cinema display despite the fact that my laptop lid is closed. This is good, and is what I want. At that point, I open the laptop lid and quickly log in.
    With Apple being a mobile device company, I rely on the laptop for tasks that one traditionally may use a desktop for. This simply points to the versatility of the laptop. But I'd like the bugs resolved, so that I do not have to hesitate to make use of the inherent flexibility possible with the MacBook Pro.
    Here's what happens when the process (of connecting the external display in a way that establishes itself as the only screen in use by OS X) fails. Firstly, when I connect the external display via Mini DisplayPort, the laptop doesn't even respond. Instead, it remains asleep. So to work around it I have to repeatedly disconnect and reconnect the Mini DisplayPort so that the asleep MacBook Pro will see that there is a display connected to it. Also, sometimes that isn't even enough and I have to open the laptop lid, and put it to sleep again so as to trigger whatever actions are necessary to recognise the external display (presumably by having the laptop recently awake). Around half the time, I have to play this game of disconnecting and reconnecting until it actually works. This high level of reproducibility (confirmed by the Apple Genius representative's confidence that this part of the system doesn't actually work) should make it easy for an engineer to look into the problem.
    Fatally, and recently, OS X has completely crashed when I have attempted to connect the external display. The external display has gone completely blue, and after a half a minute, it blanked out and my entire laptop became unresponsive. I called Apple Support and was given a case number. I also took the laptop into the retail store to see if I could recover my current session without rebooting. There was no process suggested to make that happen and I was told to reboot the machine. I've had this happen before on other laptops, and it is frustrating that the kernel reaches such a state that it cannot be used. As I see it, this problem is not too unrelated to the way that I need to play a game in order to get the external display connected exclusively. Here are some workarounds that could be added:
    Firstly, whenever I connect an external display, I'd like the laptop to see that this has happened, and to take action accordingly (such as resuming from sleep). Secondly, If I connect an external keyboard, and press a key on it, I'd like this to wake the laptop too (in the event that the first method fails for some unforeseen reason). I'd also like the connection of the cinema display's USB power not to cause the laptop to enter into a confused state between asleep and awake. Sometimes I need to disconnect and reconnect USB power in order to trigger the laptop into waking, but that's only because it's not doing it on its own properly. On the other hand, I also ensure that the laptop doesn't have the Mini DisplayPort connected without also having the cinema display USB power connected, because that also is an unsupported configuration.
    I've also gotten the laptop to become confused about whether it is asleep or awake. When I open the lid, it seems to enter into sleep mode, but closing it seems to bring it into an active state.
    Also, I've successfully logged on and authenticated with the screen showing exclusively on the external display. But just ten seconds after I start using the system, the laptop falls asleep--with the lid open! Whatever triggers that action doesn't seem to be on track. The laptop is open, there are incoming events such as mouse movements and key presses, and the external display is on and is in use. And then the laptop falls asleep! This has happened numerous times. Not only should this not happen; the instances where it does happen can cause further instability and put my system at risk of fatally crashing.
    Also, the authentication system itself is highly buggy--far more than it should be. At times I have opened the laptop lid and caught a glimpse of a window before I have begun the login process. Also, an external authentication application that asks for Kerberos/AFS login credentials has been able to overlay itself on top of the primary authentication (whereas I should only see a single login dialog when I need to authenticate to the system). Also, I've had several of these authentication screens overlay on top of one another, although it's been months since I've experienced that one (so it may have been fixed). Also, around a third of the time, the window that authenticates me (on the black background) somehow transfers itself into the background (even though there's only one window!). What that means is what I begin to type my password, and now the laptop starts beeping at me and I need to manually click on the password field and begin entering my password again. This really shouldn't happen, and indicates too much complexity in this authentication process (such as, more OS X code is involved than is strictly necessary, which is likely to make the authentication system more difficult to test). Also, at times, I have been using too much CPU, such that the authentication screen takes too long to emerge. That also means that I'm not able to logon until I uncleanly shutdown the laptop. If the laptop has been asleep, and is revived in preparation for login, then that login screen should be given highest priority, even if there are other heavy CPU or I/O intensive tasks running in the background. And maybe the login dialog shouldn't disappear when the user is legitimately attempting to log in. So even if there is a possibility that the system is under heavy resource use (or there is a stall or minor deadlock), it shouldn't prevent the user from logging in altogether.
    At the moment, the very fact that the system shut down uncleanly means that the full disk encryption suite that I used has entered into an undetermined state, suggesting I may lose access to all my data. It's my hope that I can rely on Apple's products to interoperate in a way that won't cause me to be fearful and restrictive in my use, so that I can freely connect an external display at times, and at other times carry the laptop on the road.

    Ive got the same problem with Samsung UE225010 monitor too, its full hd but it looks terrible, could it be Displayport adapter issue, because couple month ago Ive tryed with some IPS display, and it looked same bad.

  • External Display No Longer Working (Air & Thunderbolt)

    My MacBook Air just decided it no longer wants to work with my external Dell U2711 display via Thunderbolt to DisplayPort cable. Frustrating as this has been working for the past 3 years. Currently running OS X 10.10.2. Have tried PRAM and SMC resets to no avail. Not sure what is going wrong, but looking at the error log it is obviously trying to set it to the wrong resolution "1440 x 900". Previously everything was working great with a resolution of 2560 x 1440. Thoughts?
    ****Error Log Below****
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Received display connect changed for display 0x42737c0
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Found 16 modes for display 0x042737c0 [16, 0]
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Received display connect changed for display 0x3f003d
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Found 1 modes for display 0x003f003d [1, 0]
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Received display connect changed for display 0x3f003e
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Found 1 modes for display 0x003f003e [1, 0]
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Display 0x042737c0: GL mask 0x1; bounds (0, 0)[1440 x 900], 16 modes available
      Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model 9cdf, S/N 0, Unit 0, Rotation 0
      UUID 0x2fa49b462ac314062ce76fce977d6525, ColorSpace { 189789772 }
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000000f, accelerator 0x00003ab3, unit 0, caps QEX|MIPMAP, vram 451 MB
      texture max 8192, viewport max {8192, 8192}, extensions NPOT|GLSL|FLOAT
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Display 0x003f003f: GL mask 0x8; bounds (2464, 0)[1 x 1], 2 modes available
      off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000000f, accelerator 0x00003ab3, unit 0, caps QEX|MIPMAP, vram 451 MB
      texture max 8192, viewport max {8192, 8192}, extensions NPOT|GLSL|FLOAT
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Display 0x042737c0: Unit 0: Startup Mode 1440 x 900, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80001000, ioModeDepth 0x0, IOReturn 0x0
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: CGXDisplaysDidReconfigure: Display added
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: CGXDisplaysDidReconfigure: Display removed
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Display 0x042737c0: GL mask 0x1; bounds (0, 0)[1440 x 900], 16 modes available
      Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model 9cdf, S/N 0, Unit 0, Rotation 0
      UUID 0x2fa49b462ac314062ce76fce977d6525, ColorSpace { 189789772 }
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000000f, accelerator 0x00003ab3, unit 0, caps QEX|MIPMAP, vram 451 MB
      texture max 8192, viewport max {8192, 8192}, extensions NPOT|GLSL|FLOAT
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Display 0x003f003f: GL mask 0x8; bounds (2464, 0)[1 x 1], 2 modes available
      off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000000f, accelerator 0x00003ab3, unit 0, caps QEX|MIPMAP, vram 451 MB
      texture max 8192, viewport max {8192, 8192}, extensions NPOT|GLSL|FLOAT
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Mar  2 14:39:13 Nick-MacBook-Air-2.local WindowServer[154]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Mar  2 14:39:15 Nick-MacBook-Air-2.local WindowServer[154]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
    Mar  2 14:39:15 --- last message repeated 1 time ---
    Mar  2 14:39:15 Nick-MacBook-Air-2.local WindowServer[154]: CGXSetDisplayColorProfileAndTransfer: Display 0x042737c0: Unit 0; ColorProfile { 189789772 }; TransferTable (256, 12)
    Mar  2 14:39:15 Nick-MacBook-Air-2.local com.apple.AmbientDisplayAgent[304]: AMBD Agent: xpc connection became invalid during event handler
    Mar  2 14:39:15 Nick-MacBook-Air-2.local WindowServer[154]: CGXSetDisplayColorProfileAndTransfer: Display 0x042737c0: Unit 0; ColorProfile { 189789772 }; TransferTable (256, 12)
    Mar  2 14:39:15 Nick-MacBook-Air-2.local com.apple.AmbientDisplayAgent[304]: AMBD Agent: xpc connection became invalid during event handler
    Mar  2 14:39:15 Nick-MacBook-Air-2.local DMProxy[612]: AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
    Mar  2 14:39:15 Nick-MacBook-Air-2.local com.apple.AmbientDisplayAgent[304]: AmbientDisplayAgent started
    Mar  2 14:39:15 Nick-MacBook-Air-2.local WindowServer[154]: CGXSetDisplayColorProfileAndTransfer: Display 0x042737c0: Unit 0; ColorProfile { 189789772 }; TransferTable (256, 12)
    Mar  2 14:39:15 Nick-MacBook-Air-2.local com.apple.AmbientDisplayAgent[304]: AMBD initializing devices
    Mar  2 14:39:15 Nick-MacBook-Air-2.local com.apple.AmbientDisplayAgent[304]: AMBD Agent: xpc connection became invalid during event handler
    Mar  2 14:39:15 Nick-MacBook-Air-2.local DMProxy[613]: AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
    Mar  2 14:39:15 Nick-MacBook-Air-2.local com.apple.AmbientDisplayAgent[304]: AmbientDisplayAgent started
    Mar  2 14:39:15 Nick-MacBook-Air-2.local WindowServer[154]: CGXSetDisplayColorProfileAndTransfer: Display 0x042737c0: Unit 0; ColorProfile { 189789772 }; TransferTable (256, 12)
    Mar  2 14:39:15 Nick-MacBook-Air-2.local com.apple.AmbientDisplayAgent[304]: AMBD initializing devices
    Mar  2 14:39:15 Nick-MacBook-Air-2.local com.apple.AmbientDisplayAgent[304]: AMBD Agent: xpc connection became invalid during event handler

    Howdy Haknat,
    Thanks for using the Apple Support Communities.
    If you're still seeing no image on the external display after resetting the SMC and PRAM, then the next step I'd like you to do is to start the device in Safe Mode.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    If you tried all of these steps for your display and the video issues persist, contact Apple technical support or take your Apple computer to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Take care,
    Alex H.

  • External Display Flickers (Intel on board)

    Hi,
    I have recently made a fresh installation of Arch Linux and trying to setup it for my work environment. I made a basic installation of xfce4 with slim login manager. I wanted to hook my laptop with an external display. I used xrandr to extend my laptop display with the external display. Everything worked fine but my external display flickers insanely bad. I cannot stare at it for > 30s. I dual boot on windows, so I tested the same setup with windows and it worked just fine, out of the box. I even used one of my friend's laptop who's running ubuntu and has the same h/w. It worked out of the box. I have spent more than 8 hours trying to find out where the issue would be and miserably failed. Below are certain logs and output that might help traingulate my issue.
    Its a Dell Inspiron N4030, with Intel onboard graphics. I have the xf86-video-intel driver installed and the display works perfectly fine with laptops default display.
    Output of xrandr -q
    [joker@lucifer ~]$ xrandr -q
    Screen 0: minimum 320 x 200, current 2732 x 768, maximum 8192 x 8192
    LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
    1366x768 60.0*+
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 connected 1366x768+1366+0 (normal left inverted right x axis y axis) 344mm x 194mm
    1366x768 60.0*+
    1024x768 75.1 72.0 70.1 60.0
    832x624 74.6
    800x600 72.2 75.0 60.3 56.2
    640x480 72.8 75.0 66.7 60.0
    720x400 70.1
    /var/log/Xorg.0.log
    [ 42.854]
    X.Org X Server 1.11.2
    Release Date: 2011-11-04
    [ 42.854] X Protocol Version 11, Revision 0
    [ 42.854] Build Operating System: Linux 3.1.0-3-ARCH x86_64
    [ 42.854] Current Operating System: Linux lucifer 3.1.0-4-ARCH #1 SMP PREEMPT Mon Nov 7 22:47:18 CET 2011 x86_64
    [ 42.854] Kernel command line: root=/dev/sda5 ro
    [ 42.854] Build Date: 07 November 2011 07:53:00AM
    [ 42.854]
    [ 42.854] Current version of pixman: 0.24.0
    [ 42.854] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 42.854] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 42.855] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 10 17:07:34 2011
    [ 42.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 42.927] (==) ServerLayout "DualSreen"
    [ 42.927] (**) |-->Screen "Screen0" (0)
    [ 42.927] (**) | |-->Monitor "Monitor0"
    [ 42.945] (**) | |-->Device "Device0"
    [ 42.945] (**) |-->Screen "Screen1" (1)
    [ 42.945] (**) | |-->Monitor "Monitor1"
    [ 42.945] (**) | |-->Device "Device1"
    [ 42.945] (**) Option "Xinerama" "1"
    [ 42.945] (==) Automatically adding devices
    [ 42.945] (==) Automatically enabling devices
    [ 42.945] (**) Xinerama: enabled
    [ 43.004] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 43.004] Entry deleted from font path.
    [ 43.004] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 43.004] Entry deleted from font path.
    [ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 43.005] Entry deleted from font path.
    [ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 43.005] Entry deleted from font path.
    [ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 43.005] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 43.005] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 43.005] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 43.005] (II) Loader magic: 0x7ccae0
    [ 43.005] (II) Module ABI versions:
    [ 43.005] X.Org ANSI C Emulation: 0.4
    [ 43.005] X.Org Video Driver: 11.0
    [ 43.005] X.Org XInput driver : 13.0
    [ 43.005] X.Org Server Extension : 6.0
    [ 43.006] (--) PCI:*(0:0:2:0) 8086:0046:1028:0466 rev 2, Mem @ 0xfac00000/4194304, 0xc0000000/268435456, I/O @ 0x0000f080/8
    [ 43.006] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 43.006] (II) LoadModule: "extmod"
    [ 43.027] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 43.043] (II) Module extmod: vendor="X.Org Foundation"
    [ 43.043] compiled for 1.11.2, module version = 1.0.0
    [ 43.043] Module class: X.Org Server Extension
    [ 43.043] ABI class: X.Org Server Extension, version 6.0
    [ 43.043] (II) Loading extension MIT-SCREEN-SAVER
    [ 43.043] (II) Loading extension XFree86-VidModeExtension
    [ 43.043] (II) Loading extension XFree86-DGA
    [ 43.043] (II) Loading extension DPMS
    [ 43.043] (II) Loading extension XVideo
    [ 43.043] (II) Loading extension XVideo-MotionCompensation
    [ 43.043] (II) Loading extension X-Resource
    [ 43.044] (II) LoadModule: "dbe"
    [ 43.044] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 43.045] (II) Module dbe: vendor="X.Org Foundation"
    [ 43.045] compiled for 1.11.2, module version = 1.0.0
    [ 43.045] Module class: X.Org Server Extension
    [ 43.045] ABI class: X.Org Server Extension, version 6.0
    [ 43.045] (II) Loading extension DOUBLE-BUFFER
    [ 43.045] (II) LoadModule: "glx"
    [ 43.045] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 43.060] (II) Module glx: vendor="X.Org Foundation"
    [ 43.060] compiled for 1.11.2, module version = 1.0.0
    [ 43.060] ABI class: X.Org Server Extension, version 6.0
    [ 43.060] (==) AIGLX enabled
    [ 43.060] (II) Loading extension GLX
    [ 43.060] (II) LoadModule: "record"
    [ 43.060] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 43.061] (II) Module record: vendor="X.Org Foundation"
    [ 43.061] compiled for 1.11.2, module version = 1.13.0
    [ 43.061] Module class: X.Org Server Extension
    [ 43.061] ABI class: X.Org Server Extension, version 6.0
    [ 43.061] (II) Loading extension RECORD
    [ 43.061] (II) LoadModule: "dri"
    [ 43.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 43.063] (II) Module dri: vendor="X.Org Foundation"
    [ 43.063] compiled for 1.11.2, module version = 1.0.0
    [ 43.063] ABI class: X.Org Server Extension, version 6.0
    [ 43.063] (II) Loading extension XFree86-DRI
    [ 43.063] (II) LoadModule: "dri2"
    [ 43.063] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 43.064] (II) Module dri2: vendor="X.Org Foundation"
    [ 43.064] compiled for 1.11.2, module version = 1.2.0
    [ 43.064] ABI class: X.Org Server Extension, version 6.0
    [ 43.064] (II) Loading extension DRI2
    [ 43.064] (II) LoadModule: "intel"
    [ 43.091] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 43.114] (II) Module intel: vendor="X.Org Foundation"
    [ 43.114] compiled for 1.10.99.902, module version = 2.16.0
    [ 43.114] Module class: X.Org Video Driver
    [ 43.114] ABI class: X.Org Video Driver, version 11.0
    [ 43.114] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    [ 43.114] (++) using VT number 7
    [ 43.134] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 43.135] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 43.135] Requested Entity already in use!
    [ 43.135] (EE) Screen 1 deleted because of no matching config section.
    [ 43.135] (II) UnloadModule: "intel"
    [ 43.136] (II) Unloading intel
    [ 43.136] drmOpenDevice: node name is /dev/dri/card0
    [ 43.136] drmOpenDevice: open result is 8, (OK)
    [ 43.136] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 43.136] drmOpenDevice: node name is /dev/dri/card0
    [ 43.136] drmOpenDevice: open result is 8, (OK)
    [ 43.136] drmOpenByBusid: drmOpenMinor returns 8
    [ 43.136] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 43.136] (**) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 43.136] (==) intel(0): RGB weight 888
    [ 43.136] (==) intel(0): Default visual is TrueColor
    [ 43.136] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
    [ 43.136] (--) intel(0): Chipset: "Arrandale"
    [ 43.136] (**) intel(0): Relaxed fencing enabled
    [ 43.136] (**) intel(0): Wait on SwapBuffers? enabled
    [ 43.136] (**) intel(0): Triple buffering? enabled
    [ 43.136] (**) intel(0): Framebuffer tiled
    [ 43.136] (**) intel(0): Pixmaps tiled
    [ 43.136] (**) intel(0): 3D buffers tiled
    [ 43.136] (**) intel(0): SwapBuffers wait enabled
    [ 43.136] (==) intel(0): video overlay key set to 0x101fe
    [ 43.136] (II) intel(0): Output LVDS1 using monitor section Monitor0
    [ 43.136] (**) intel(0): Option "Enable" "true"
    [ 43.136] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 43.196] (II) intel(0): Output VGA1 has no monitor section
    [ 43.196] (II) intel(0): EDID for output LVDS1
    [ 43.196] (II) intel(0): Manufacturer: BOE Model: 58e Serial#: 0
    [ 43.196] (II) intel(0): Year: 2010 Week: 1
    [ 43.196] (II) intel(0): EDID Version: 1.4
    [ 43.196] (II) intel(0): Digital Display Input
    [ 43.196] (II) intel(0): Undefined color depth
    [ 43.196] (II) intel(0): Digital interface is undefined
    [ 43.196] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
    [ 43.196] (II) intel(0): Gamma: 2.20
    [ 43.196] (II) intel(0): No DPMS capabilities specified
    [ 43.196] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 43.196] (II) intel(0): First detailed timing is preferred mode
    [ 43.196] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 43.196] (II) intel(0): redX: 0.574 redY: 0.335 greenX: 0.335 greenY: 0.585
    [ 43.196] (II) intel(0): blueX: 0.154 blueY: 0.119 whiteX: 0.312 whiteY: 0.328
    [ 43.196] (II) intel(0): Manufacturer's mask: 0
    [ 43.196] (II) intel(0): Supported detailed timing:
    [ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
    [ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
    [ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
    [ 43.196] (II) intel(0): Supported detailed timing:
    [ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
    [ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
    [ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
    [ 43.196] (II) intel(0): KFDV9HT14101
    [ 43.196] (II) intel(0): Unknown vendor-specific block 0
    [ 43.196] (II) intel(0): EDID (in hex):
    [ 43.196] (II) intel(0): 00ffffffffffff0009e58e0500000000
    [ 43.196] (II) intel(0): 01140104801f11780a3fa09355559527
    [ 43.196] (II) intel(0): 1e505400000001010101010101010101
    [ 43.196] (II) intel(0): 010101010101411c56a0500016303020
    [ 43.196] (II) intel(0): 360035ad1000001a411c56a050001630
    [ 43.196] (II) intel(0): 3020360035ad1000001a000000fe004b
    [ 43.196] (II) intel(0): 46445639814854313431303100000000
    [ 43.196] (II) intel(0): 00004101940100000001010a20200000
    [ 43.196] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 43.196] (II) intel(0): Printing DDC gathered Modelines:
    [ 43.196] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 43.196] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Printing probed modes for output LVDS1
    [ 43.196] (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 43.196] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 43.196] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 43.196] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 43.196] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 43.255] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 43.255] (II) intel(0): EDID for output VGA1
    [ 43.255] (II) intel(0): Manufacturer: PHL Model: c02d Serial#: 9740
    [ 43.255] (II) intel(0): Year: 2009 Week: 35
    [ 43.255] (II) intel(0): EDID Version: 1.3
    [ 43.255] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 43.255] (II) intel(0): Sync: Separate
    [ 43.255] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 43.255] (II) intel(0): Gamma: 2.20
    [ 43.255] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
    [ 43.255] (II) intel(0): First detailed timing is preferred mode
    [ 43.255] (II) intel(0): redX: 0.635 redY: 0.335 greenX: 0.281 greenY: 0.597
    [ 43.255] (II) intel(0): blueX: 0.153 blueY: 0.085 whiteX: 0.312 whiteY: 0.328
    [ 43.255] (II) intel(0): Supported established timings:
    [ 43.255] (II) intel(0): 720x400@70Hz
    [ 43.255] (II) intel(0): 640x480@60Hz
    [ 43.255] (II) intel(0): 640x480@67Hz
    [ 43.255] (II) intel(0): 640x480@72Hz
    [ 43.255] (II) intel(0): 640x480@75Hz
    [ 43.255] (II) intel(0): 800x600@56Hz
    [ 43.255] (II) intel(0): 800x600@60Hz
    [ 43.255] (II) intel(0): 800x600@72Hz
    [ 43.255] (II) intel(0): 800x600@75Hz
    [ 43.255] (II) intel(0): 832x624@75Hz
    [ 43.255] (II) intel(0): 1024x768@60Hz
    [ 43.255] (II) intel(0): 1024x768@70Hz
    [ 43.255] (II) intel(0): 1024x768@75Hz
    [ 43.255] (II) intel(0): Manufacturer's mask: 0
    [ 43.255] (II) intel(0): Supported standard timings:
    [ 43.255] (II) intel(0): #0: hsize: 640 vsize 400 refresh: 70 vid: 2609
    [ 43.255] (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 72 vid: 19553
    [ 43.255] (II) intel(0): Supported detailed timing:
    [ 43.255] (II) intel(0): clock: 85.8 MHz Image Size: 344 x 194 mm
    [ 43.255] (II) intel(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
    [ 43.255] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
    [ 43.255] (II) intel(0): Serial No: AU50935009740
    [ 43.255] (II) intel(0): Monitor name: Philips 160E
    [ 43.255] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 60 kHz, PixClock max 86 MHz
    [ 43.255] (II) intel(0): EDID (in hex):
    [ 43.255] (II) intel(0): 00ffffffffffff00410c2dc00c260000
    [ 43.255] (II) intel(0): 23130103682213782ab370a255489827
    [ 43.255] (II) intel(0): 155054bfee00310a614c010101010101
    [ 43.255] (II) intel(0): 0101010101017f2156aa51001e30468f
    [ 43.255] (II) intel(0): 330058c21000001e000000ff00415535
    [ 43.255] (II) intel(0): 30393335303039373430000000fc0050
    [ 43.255] (II) intel(0): 68696c69707320313630450a000000fd
    [ 43.255] (II) intel(0): 00384c1e3c08000a20202020202000c0
    [ 43.255] (II) intel(0): Printing probed modes for output VGA1
    [ 43.255] (II) intel(0): Modeline "1366x768"x60.0 85.75 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.9 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 43.255] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 43.255] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 43.255] (II) intel(0): Output LVDS1 enabled by config file
    [ 43.255] (II) intel(0): Output VGA1 connected
    [ 43.255] (II) intel(0): Using exact sizes for initial modes
    [ 43.255] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 43.255] (II) intel(0): Output VGA1 using initial mode 1366x768
    [ 43.255] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 43.255] (II) intel(0): Kernel page flipping support detected, enabling
    [ 43.255] (**) intel(0): Display dimensions: (310, 170) mm
    [ 43.255] (**) intel(0): DPI set to (111, 114)
    [ 43.255] (II) Loading sub module "fb"
    [ 43.255] (II) LoadModule: "fb"
    [ 43.255] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 43.277] (II) Module fb: vendor="X.Org Foundation"
    [ 43.277] compiled for 1.11.2, module version = 1.0.0
    [ 43.277] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 43.277] (II) Loading sub module "dri2"
    [ 43.277] (II) LoadModule: "dri2"
    [ 43.277] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 43.277] (II) Module dri2: vendor="X.Org Foundation"
    [ 43.277] compiled for 1.11.2, module version = 1.2.0
    [ 43.277] ABI class: X.Org Server Extension, version 6.0
    [ 43.277] (==) Depth 24 pixmap format is 32 bpp
    [ 43.277] (II) intel(0): [DRI2] Setup complete
    [ 43.277] (II) intel(0): [DRI2] DRI driver: i965
    [ 43.277] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
    [ 43.339] (II) UXA(0): Driver registered support for the following operations:
    [ 43.339] (II) solid
    [ 43.339] (II) copy
    [ 43.339] (II) composite (RENDER acceleration)
    [ 43.339] (II) put_image
    [ 43.339] (II) get_image
    [ 43.339] (==) intel(0): Backing store disabled
    [ 43.339] (==) intel(0): Silken mouse enabled
    [ 43.339] (II) intel(0): Initializing HW Cursor
    [ 43.456] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 43.466] (==) intel(0): DPMS enabled
    [ 43.466] (==) intel(0): Intel XvMC decoder enabled
    [ 43.466] (II) intel(0): Set up textured video
    [ 43.466] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 43.466] (II) intel(0): direct rendering: DRI2 Enabled
    [ 43.466] (WW) intel(0): Option "Enable" is not used
    [ 43.466] (WW) intel(0): Option "TwinView" is not used
    [ 43.466] (==) intel(0): hotplug detection: "enabled"
    [ 43.466] (--) RandR disabled
    [ 43.466] (II) Initializing built-in extension Generic Event Extension
    [ 43.466] (II) Initializing built-in extension SHAPE
    [ 43.466] (II) Initializing built-in extension MIT-SHM
    [ 43.466] (II) Initializing built-in extension XInputExtension
    [ 43.466] (II) Initializing built-in extension XTEST
    [ 43.466] (II) Initializing built-in extension BIG-REQUESTS
    [ 43.466] (II) Initializing built-in extension SYNC
    [ 43.466] (II) Initializing built-in extension XKEYBOARD
    [ 43.466] (II) Initializing built-in extension XC-MISC
    [ 43.466] (II) Initializing built-in extension SECURITY
    [ 43.466] (II) Initializing built-in extension XINERAMA
    [ 43.466] (II) Initializing built-in extension XFIXES
    [ 43.466] (II) Initializing built-in extension RENDER
    [ 43.466] (II) Initializing built-in extension RANDR
    [ 43.466] (II) Initializing built-in extension COMPOSITE
    [ 43.466] (II) Initializing built-in extension DAMAGE
    [ 43.605] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 43.605] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 43.605] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 43.605] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 43.605] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 43.605] (II) AIGLX: Loaded and initialized i965
    [ 43.605] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 43.605] (II) intel(0): Setting screen physical size to 361 x 203
    [ 43.909] (II) config/udev: Adding input device Power Button (/dev/input/event7)
    [ 43.910] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 43.910] (II) LoadModule: "evdev"
    [ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.910] (II) Module evdev: vendor="X.Org Foundation"
    [ 43.910] compiled for 1.10.99.902, module version = 2.6.0
    [ 43.910] Module class: X.Org XInput Driver
    [ 43.910] ABI class: X.Org XInput driver, version 13.0
    [ 43.910] (II) Using input driver 'evdev' for 'Power Button'
    [ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.911] (**) Power Button: always reports core events
    [ 43.911] (**) Power Button: Device: "/dev/input/event7"
    [ 43.911] (--) Power Button: Found keys
    [ 43.911] (II) Power Button: Configuring as keyboard
    [ 43.911] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
    [ 43.911] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 43.911] (**) Option "xkb_rules" "evdev"
    [ 43.911] (**) Option "xkb_model" "evdev"
    [ 43.911] (**) Option "xkb_layout" "us"
    [ 43.931] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
    [ 43.931] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 43.931] (II) Using input driver 'evdev' for 'Video Bus'
    [ 43.931] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.931] (**) Video Bus: always reports core events
    [ 43.931] (**) Video Bus: Device: "/dev/input/event15"
    [ 43.931] (--) Video Bus: Found keys
    [ 43.931] (II) Video Bus: Configuring as keyboard
    [ 43.931] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15"
    [ 43.931] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 43.931] (**) Option "xkb_rules" "evdev"
    [ 43.931] (**) Option "xkb_model" "evdev"
    [ 43.931] (**) Option "xkb_layout" "us"
    [ 43.932] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 43.932] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 43.932] (II) Using input driver 'evdev' for 'Power Button'
    [ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.932] (**) Power Button: always reports core events
    [ 43.932] (**) Power Button: Device: "/dev/input/event4"
    [ 43.932] (--) Power Button: Found keys
    [ 43.932] (II) Power Button: Configuring as keyboard
    [ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 43.932] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 43.932] (**) Option "xkb_rules" "evdev"
    [ 43.932] (**) Option "xkb_model" "evdev"
    [ 43.932] (**) Option "xkb_layout" "us"
    [ 43.932] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
    [ 43.932] (II) No input driver/identifier specified (ignoring)
    [ 43.932] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
    [ 43.932] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 43.932] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.932] (**) Sleep Button: always reports core events
    [ 43.932] (**) Sleep Button: Device: "/dev/input/event6"
    [ 43.932] (--) Sleep Button: Found keys
    [ 43.932] (II) Sleep Button: Configuring as keyboard
    [ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6"
    [ 43.932] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 43.933] (**) Option "xkb_rules" "evdev"
    [ 43.933] (**) Option "xkb_model" "evdev"
    [ 43.933] (**) Option "xkb_layout" "us"
    [ 43.933] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event2)
    [ 43.933] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
    [ 43.933] (II) Using input driver 'evdev' for 'HID 413c:8161'
    [ 43.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.933] (**) HID 413c:8161: always reports core events
    [ 43.933] (**) HID 413c:8161: Device: "/dev/input/event2"
    [ 43.933] (--) HID 413c:8161: Found keys
    [ 43.933] (II) HID 413c:8161: Configuring as keyboard
    [ 43.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input2/event2"
    [ 43.933] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD, id 10)
    [ 43.933] (**) Option "xkb_rules" "evdev"
    [ 43.933] (**) Option "xkb_model" "evdev"
    [ 43.933] (**) Option "xkb_layout" "us"
    [ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/event3)
    [ 43.934] (**) HID 413c:8162: Applying InputClass "evdev pointer catchall"
    [ 43.934] (II) Using input driver 'evdev' for 'HID 413c:8162'
    [ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.934] (**) HID 413c:8162: always reports core events
    [ 43.934] (**) HID 413c:8162: Device: "/dev/input/event3"
    [ 43.934] (--) HID 413c:8162: Found 3 mouse buttons
    [ 43.934] (--) HID 413c:8162: Found relative axes
    [ 43.934] (--) HID 413c:8162: Found x and y relative axes
    [ 43.934] (II) HID 413c:8162: Configuring as mouse
    [ 43.934] (**) HID 413c:8162: YAxisMapping: buttons 4 and 5
    [ 43.934] (**) HID 413c:8162: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input3/event3"
    [ 43.934] (II) XINPUT: Adding extended input device "HID 413c:8162" (type: MOUSE, id 11)
    [ 43.934] (II) HID 413c:8162: initialized for relative axes.
    [ 43.934] (**) HID 413c:8162: (accel) keeping acceleration scheme 1
    [ 43.934] (**) HID 413c:8162: (accel) acceleration profile 0
    [ 43.934] (**) HID 413c:8162: (accel) acceleration factor: 2.000
    [ 43.934] (**) HID 413c:8162: (accel) acceleration threshold: 4
    [ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/mouse1)
    [ 43.934] (II) No input driver/identifier specified (ignoring)
    [ 43.934] (II) config/udev: Adding input device Laptop_Integrated_Webcam_0.3M (/dev/input/event10)
    [ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Applying InputClass "evdev keyboard catchall"
    [ 43.934] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_0.3M'
    [ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.934] (**) Laptop_Integrated_Webcam_0.3M: always reports core events
    [ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Device: "/dev/input/event10"
    [ 43.934] (--) Laptop_Integrated_Webcam_0.3M: Found keys
    [ 43.934] (II) Laptop_Integrated_Webcam_0.3M: Configuring as keyboard
    [ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 43.934] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_0.3M" (type: KEYBOARD, id 12)
    [ 43.934] (**) Option "xkb_rules" "evdev"
    [ 43.934] (**) Option "xkb_model" "evdev"
    [ 43.934] (**) Option "xkb_layout" "us"
    [ 43.935] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
    [ 43.935] (II) No input driver/identifier specified (ignoring)
    [ 43.935] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event12)
    [ 43.935] (II) No input driver/identifier specified (ignoring)
    [ 43.935] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event13)
    [ 43.935] (II) No input driver/identifier specified (ignoring)
    [ 43.935] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
    [ 43.935] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    [ 43.935] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
    [ 43.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.936] (**) USB OPTICAL MOUSE: always reports core events
    [ 43.936] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
    [ 43.936] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
    [ 43.936] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
    [ 43.936] (--) USB OPTICAL MOUSE: Found relative axes
    [ 43.936] (--) USB OPTICAL MOUSE: Found x and y relative axes
    [ 43.936] (II) USB OPTICAL MOUSE: Configuring as mouse
    [ 43.936] (II) USB OPTICAL MOUSE: Adding scrollwheel support
    [ 43.936] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
    [ 43.936] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 43.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1/event1"
    [ 43.936] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
    [ 43.936] (II) USB OPTICAL MOUSE: initialized for relative axes.
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
    [ 43.936] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
    [ 43.936] (II) No input driver/identifier specified (ignoring)
    [ 43.936] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 43.936] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 43.936] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 43.936] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.936] (**) AT Translated Set 2 keyboard: always reports core events
    [ 43.936] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 43.936] (--) AT Translated Set 2 keyboard: Found keys
    [ 43.936] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 43.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 43.936] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 43.936] (**) Option "xkb_rules" "evdev"
    [ 43.936] (**) Option "xkb_model" "evdev"
    [ 43.936] (**) Option "xkb_layout" "us"
    [ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event14)
    [ 43.937] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 43.937] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 43.937] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.937] (**) PS/2 Generic Mouse: always reports core events
    [ 43.937] (**) PS/2 Generic Mouse: Device: "/dev/input/event14"
    [ 43.937] (--) PS/2 Generic Mouse: Found 3 mouse buttons
    [ 43.937] (--) PS/2 Generic Mouse: Found relative axes
    [ 43.937] (--) PS/2 Generic Mouse: Found x and y relative axes
    [ 43.937] (II) PS/2 Generic Mouse: Configuring as mouse
    [ 43.937] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 43.937] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 43.937] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
    [ 43.937] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
    [ 43.937] (II) PS/2 Generic Mouse: initialized for relative axes.
    [ 43.937] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse2)
    [ 43.937] (II) No input driver/identifier specified (ignoring)
    [ 43.937] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 43.937] (II) No input driver/identifier specified (ignoring)
    [ 43.938] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
    [ 43.938] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 43.938] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 43.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.938] (**) Dell WMI hotkeys: always reports core events
    [ 43.938] (**) Dell WMI hotkeys: Device: "/dev/input/event9"
    [ 43.938] (--) Dell WMI hotkeys: Found keys
    [ 43.938] (II) Dell WMI hotkeys: Configuring as keyboard
    [ 43.938] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 43.938] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
    [ 43.938] (**) Option "xkb_rules" "evdev"
    [ 43.938] (**) Option "xkb_model" "evdev"
    [ 43.938] (**) Option "xkb_layout" "us"
    [ 48.392] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 48.392] (II) intel(0): Printing DDC gathered Modelines:
    [ 48.392] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 48.456] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 48.457] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 48.457] (II) intel(0): Printing DDC gathered Modelines:
    [ 48.457] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 48.517] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 49.976] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 49.976] (II) intel(0): Printing DDC gathered Modelines:
    [ 49.976] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 50.035] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 213.440] (II) config/udev: removing device USB OPTICAL MOUSE
    [ 213.440] (II) USB OPTICAL MOUSE: Close
    [ 213.440] (II) UnloadModule: "evdev"
    [ 213.440] (II) Unloading evdev
    [ 213.728] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
    [ 213.728] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    [ 213.728] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
    [ 213.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 213.728] (**) USB OPTICAL MOUSE: always reports core events
    [ 213.728] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
    [ 213.728] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
    [ 213.728] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
    [ 213.728] (--) USB OPTICAL MOUSE: Found relative axes
    [ 213.728] (--) USB OPTICAL MOUSE: Found x and y relative axes
    [ 213.728] (II) USB OPTICAL MOUSE: Configuring as mouse
    [ 213.728] (II) USB OPTICAL MOUSE: Adding scrollwheel support
    [ 213.728] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
    [ 213.728] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 213.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input16/event1"
    [ 213.728] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
    [ 213.728] (II) USB OPTICAL MOUSE: initialized for relative axes.
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
    [ 213.730] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
    [ 213.730] (II) No input driver/identifier specified (ignoring)
    [ 1627.253] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1627.253] (II) intel(0): Printing DDC gathered Modelines:
    [ 1627.253] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1627.311] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1644.964] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1644.964] (II) intel(0): Printing DDC gathered Modelines:
    [ 1644.964] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.027] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.042] (II) intel(0): Allocated new frame buffer 2752x768 stride 11264, tiled
    [ 1645.230] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.230] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.230] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.289] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.307] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.307] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.307] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.365] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.387] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.387] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.387] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.446] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.447] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.447] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.447] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.505] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 2335.972] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 2335.972] (II) intel(0): Printing DDC gathered Modelines:
    [ 2335.972] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 2336.030] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    lspci output
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
    00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
    00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
    12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
    13:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
    ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

    No one? I have the exact same problem. MSI x360 laptop, intel onboard graphics. I too use xrandr. I've seen elsewhere that windows users have solved this by turning off GPU overclocking. Maybe this can point us in the right direction?

  • External Display only with VGA Adapter working

    Hello, I'm german so sorry for my bad english
    After updating to Leopard 10.5.2 and installation of the Leopard Graphic Update, my external Display isn't working with DVI anymore. If I plug it in, my desktop flashes and I also get the monitor information tab of my external Display (Name and Settings correct). But the Screen stays black as in power saving mode. If I use the DVI -> VGA Adapter, everything works fine...
    Could that Problem be realted to the new Updates?
    I've also checked every hint of that Forum (PRAM reset, deleting Preference Files, trying to boot with closed MBP, ...), nothing worked for me. The Problem also occurs in Bootcamp! The external Display is recognized fine, but will not display any image, only if I use the Adapter.

    According to Apple support, it is "expected behaviour" under Lion for the MBP's internal display to reactivate upon opening the lid, even if you want to use only your external display. A new version of the clamshell mode-related knowledgebase article (replacing HT3131) is due shortly confirming this.
    This is despite:
    - the obvious temperature-related benefits that were achievable (under Snow Leopard) by opening your MBP lid whilst continuing to output solely to a 27" cinema display
    - the waste of energy and inefficient use of graphics processing power in needlessly running two active screens (ie if running your MBP in clamshell mode would otherwise make it too hot and/or noisy)
    - the negative longer-term impact on the battery and other components from running the MBP hotter than it needs to be.  
    If you would like to have the previous behaviour restored, please consider lobbying Apple to change how Lion handles clamshell mode. Options available to Apple include changing Lion's expected behaviour or adding a user-selectable option within System Preferences.
    Feedback should be submitted here:
    http://www.apple.com/feedback/macosx.html

  • Display issue coming out of sleep (w/ external display)

    Hey everyone,
    I've a MacBook Pro with Retina display. running 10.8.2 (and Win7 x64, via Bootcamp).
    I somtimes experience trouble coming out of sleep with no external display connected, if the MacBook was connected to an external display when I sent it to sleep and the integrated display's brightness was turned all the way down. Basically, the MacBook's integrated display won't light up. I then need to hold down the power button until the machine powers off, and start it up again. Only then will the display come on, and the machine start normally.
    I've been observing this with both an external Thunderbolt Display, and a TV connected through the HDMI port. I don't think this is a Mac OS issue, as I've seen similar behavior on this same machine, running Windows, under Bootcamp.
    An example scenario: I'll be using the Thunderbolt Display, or watching a movie on my TV, with the integrated display's brightness turned all the way down, and then, while the display is still connected, I will close the lid - The machine will go to sleep. I will then come the next day, and while the computer is asleep, disconnect the external display, and open the lid. The MacBook's integrated display will not light up, the brightness keys will not respond, and I will need to force-shutdown the machine, and start it again - it will then start up, and usually fall back to the lowest display resolution setting (even though I always use much higher resolutions on both the integrated and external displays).
    I'm guessing this is happening because the computer is expecting the external display that was connected to it, during its last operation, to still be available, and when it's not - it panics!
    Also, I had times where this happened, and a force-shutdown would not do the trick. I had to actually connect back to the external display, wait for the machine to start normally, take the integrated display's brightness back up, and disconnect the external display. The machine would then resume normal operation, and I would be able to disconnect the external display and work on the integrated display.
    Has anyone else experienced this, or anything similar?

    There we go. Here's the complete Console report, up until the reboot, which fixed things. I can't make anything out of this, but perhaps someone else can.
    13/10/12 8:37:29.010 AM loginwindow[535]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
    13/10/12 8:37:29.041 AM com.apple.launchd[1]: (com.apple.emond.aslmanager[2845]) Exited with code: 255
    13/10/12 8:37:29.468 AM hidd[540]: MultitouchHID: device bootloaded
    13/10/12 8:37:29.000 AM kernel[0]: Wake reason: EC.LidOpen EHC1 (User)
    13/10/12 8:37:29.000 AM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    13/10/12 8:37:29.000 AM kernel[0]: RTC: PowerByCalendarDate setting ignored
    13/10/12 8:37:29.000 AM kernel[0]: Previous Sleep Cause: 5
    13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1d000000) may have caused a wake by issuing a remote wakeup (2)
    13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 8 of Hub at 0x1d100000) may have caused a wake by issuing a remote wakeup (3)
    13/10/12 8:37:29.000 AM kernel[0]: TBT W (2): 0x0100 [x]
    13/10/12 8:37:29.000 AM kernel[0]: The USB device BRCM20702 Hub (Port 1 of Hub at 0x1d180000) may have caused a wake by issuing a remote wakeup (3)
    13/10/12 8:37:29.000 AM kernel[0]: The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0x1d181000) may have caused a wake by issuing a remote wakeup (3)
    13/10/12 8:37:29.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    13/10/12 8:37:30.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96  MAC AUTH succeeded
    13/10/12 8:37:30.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
    13/10/12 8:37:30.000 AM kernel[0]: AirPort: Link Up on en0
    13/10/12 8:37:30.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
    13/10/12 8:37:30.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
    13/10/12 8:37:31.000 AM kernel[0]: AirPort: RSN handshake complete on en0
    13/10/12 8:37:31.982 AM airportd[2838]: _doAutoJoin: Already associated to “w00***”. Bailing on auto-join.
    13/10/12 8:37:32.459 AM configd[17]: network changed: v4(en0+:192.168.1.104) DNS+ Proxy+ SMB
    13/10/12 8:37:32.498 AM UserEventAgent[11]: Captive: en0: Not probing 'w00***' (protected network)
    13/10/12 8:37:32.514 AM configd[17]: network changed: v4(en0!:192.168.1.104) DNS Proxy SMB
    13/10/12 8:37:35.780 AM com.apple.usbmuxd[518]: SCEDeviceSocketCallback USBMuxRecvWithTimeout failed for 0x10020cb90-iTunes/com.apple.iTunes:0->0x3d-192.168.1.101:0:0: 54 - Connection reset by peer
    13/10/12 8:37:35.781 AM iTunes[2272]: _receive_message (thread 0x117992000): Could not securely receive message size: SSL_ERROR_SYSCALL (Early EOF reached)
    13/10/12 8:37:36.284 AM iTunes[2272]: _send_message (thread 0x117992000): Could not securely send message size 406: SSL_ERROR_SYSCALL errno (Broken pipe).
    13/10/12 8:37:36.286 AM iTunes[2272]: AMDeviceStopSession (thread 0x117992000): Could not stop session with device 61: kAMDSendMessageError
    13/10/12 8:37:57.165 AM com.apple.usbmuxd[518]: _handle_timer heartbeat detected detach for device 0x3d-192.168.1.101:0!
    13/10/12 8:38:14.000 AM kernel[0]: NVDA::setPowerState(0xffffff8026183800, 0 -> 2) timed out after 45406 ms
    13/10/12 8:39:25.000 AM bootlog[0]: BOOT_TIME 1350110365 0
    13/10/12 8:39:30.000 AM kernel[0]: PMAP: PCID enabled
    13/10/12 8:39:30.000 AM kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
    13/10/12 8:39:30.000 AM kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    13/10/12 8:39:30.000 AM kernel[0]: vm_page_bootstrap: 4043614 free pages and 117922 wired pages
    13/10/12 8:39:30.000 AM kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
    13/10/12 8:39:30.000 AM kernel[0]: zone leak detection enabled
    13/10/12 8:39:30.000 AM kernel[0]: standard timeslicing quantum is 10000 us
    13/10/12 8:39:30.000 AM kernel[0]: standard background quantum is 2500 us
    13/10/12 8:39:30.000 AM kernel[0]: mig_table_max_displ = 74
    13/10/12 8:39:30.000 AM kernel[0]: TSC Deadline Timer supported and enabled
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto kext started!
    13/10/12 8:39:30.000 AM kernel[0]: Running kernel space in FIPS MODE
    13/10/12 8:39:30.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    13/10/12 8:39:30.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
    13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Sandbox
    13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Quarantine
    13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    13/10/12 8:39:30.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    13/10/12 8:39:30.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
    13/10/12 8:39:30.000 AM kernel[0]: MAC Framework successfully initialized
    13/10/12 8:39:30.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    13/10/12 8:39:30.000 AM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    13/10/12 8:39:30.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 889A
    13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
    13/10/12 8:39:30.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration begin ]
    13/10/12 8:39:30.000 AM kernel[0]: Sleep failure code 0x00000002 0x27006c00
    13/10/12 8:39:30.000 AM kernel[0]: console relocated to 0xfd0020000
    13/10/12 8:39:30.000 AM kernel[0]: PCI configuration changed (bridge=17 device=5 cardbus=0)
    13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration end, bridges 12 devices 16 ]
    13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
    13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - SXFP method found
    13/10/12 8:39:30.000 AM kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
    13/10/12 8:39:30.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    13/10/12 8:39:30.000 AM kernel[0]: rooting via boot-uuid from /chosen: D6807041-7128-30C2-9A2D-BFEEC3331CEE
    13/10/12 8:39:30.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    13/10/12 8:39:30.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE SSD SM768E Media/IOGUIDPartitionScheme/Customer@2
    13/10/12 8:39:30.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 3
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: replay_journal: from: 4020736 to: 10443264 (joffset 0x12ada000)
    13/10/12 8:39:30.000 AM kernel[0]: BTCOEXIST off
    13/10/12 8:39:30.000 AM kernel[0]: BRCM tunables:
    13/10/12 8:39:30.000 AM kernel[0]: pullmode[1] txringsize[  256] reapmin[   32] reapcount[  128]
    13/10/12 8:39:30.000 AM kernel[0]: highWaterMark: VO[  192]  VI[  192]  BE[  192]  BK[  192]
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: examining extra transactions starting @ 10443264 / 0x9f5a00
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: Extra txn replay stopped @ 11364864 / 0xad6a00
    13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    13/10/12 8:39:30.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: journal replay done.
    13/10/12 8:39:30.000 AM kernel[0]: Kernel is LP64
    13/10/12 8:39:30.000 AM kernel[0]: hfs: Removed 27 orphaned / unlinked files and 2233 directories
    13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    13/10/12 8:39:30.783 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    13/10/12 8:39:31.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 20:c9:d0:48:ea:41
    13/10/12 8:39:31.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    13/10/12 8:39:31.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    13/10/12 8:39:32.037 AM airportd[25]: _processDLILEvent: en0 attached (down)
    13/10/12 8:39:32.000 AM kernel[0]: createVirtIf(): ifRole = 1
    13/10/12 8:39:32.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
    13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802247e400
    13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    13/10/12 8:39:32.000 AM kernel[0]: Created virtif 0xffffff802247e400 p2p0
    13/10/12 8:39:32.080 AM com.apple.SecurityServer[15]: Session 100000 created
    13/10/12 8:39:32.000 AM kernel[0]: AirPort: Link Down on en0. Reason 1 (Unspecified).
    13/10/12 8:39:32.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
    13/10/12 8:39:32.101 AM configd[17]: network changed.
    13/10/12 8:39:32.103 AM configd[17]: setting hostname to "w00fa.local"
    13/10/12 8:39:32.112 AM com.apple.SecurityServer[15]: Entering service
    13/10/12 8:39:32.193 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    13/10/12 8:39:32.000 AM kernel[0]: Previous Shutdown Cause: 3
    13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe
    13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8286 FirmwareVersion - 0x0097
    13/10/12 8:39:32.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    13/10/12 8:39:32.000 AM kernel[0]: AGC: 3.2.11, HW version=3.2.19 [3.2.8], flags:0, features:20600
    13/10/12 8:39:32.000 AM kernel[0]: NVDAGK100HAL loaded and registered.
    13/10/12 8:39:32.586 AM fseventsd[144]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (87566 7 87588)
    13/10/12 8:39:32.586 AM fseventsd[144]: log dir: /.fseventsd getting new uuid: A93F6A97-D1D4-4728-9B86-3AB73E58340C
    13/10/12 8:39:32.599 AM mDNSResponder[146]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
    13/10/12 8:39:32.645 AM systemkeychain[148]: done file: /var/run/systemkeychaincheck.done
    13/10/12 8:39:32.652 AM configd[17]: network changed: DNS*
    13/10/12 8:39:32.654 AM mDNSResponder[146]: D2D_IPC: Loaded
    13/10/12 8:39:32.654 AM mDNSResponder[146]: D2DInitialize succeeded
    13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Version 2012.3.3 (Jul 26 2012 08:57:03) external FUSE 27
    13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Mounted /dev/rdisk0s4 (Read-Write, label "BOOTCAMP", NTFS 3.1)
    13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Cmdline options: recover,cbcio,sfmconv,streams_interface=openxattr,native_xattr,nfconv,aligned_i o,fstypename=txantfs,fssubtype=0,iosize=1048576,local,adaptiveuid,adaptivegid
    13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Mount options: native_xattr,fstypename=txantfs,fssubtype=0,iosize=1048576,local,allow_other,no nempty,relatime,fsname=/dev/disk0s4,volname=BOOTCAMP
    13/10/12 8:39:33.000 AM kernel[0]: DSMOS has arrived
    13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
    13/10/12 8:39:33.000 AM kernel[0]: Universal Audio Apollo - 4.0.0.13440 (x86_64) Mar 12 2012 20:19:07
    13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    13/10/12 8:39:33.000 AM kernel[0]: TUFS: starting (version 2012.4.17, x86_64 (10.6+), built Apr 17 2012, 11:40:41)
    13/10/12 8:39:33.246 AM tuxera_ntfs[509]: License: Valid.
    13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Ownership and permissions disabled, configuration type 1
    13/10/12 8:39:33.301 AM fseventsd[144]: check_vol_last_mod_time:XXX failed to get mount time (22; &mount_time == 0x10ee45528)
    13/10/12 8:39:33.301 AM fseventsd[144]: log dir: /Volumes/BOOTCAMP/.fseventsd getting new uuid: C0009105-8F61-43E9-8563-1BB388632E71
    13/10/12 8:39:33.393 AM hidd[540]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    13/10/12 8:39:33.409 AM kdc[538]: label: default
    13/10/12 8:39:33.409 AM kdc[538]:           dbname: od:/Local/Default
    13/10/12 8:39:33.409 AM kdc[538]:           mkey_file: /var/db/krb5kdc/m-key
    13/10/12 8:39:33.409 AM kdc[538]:           acl_file: /var/db/krb5kdc/kadmind.acl
    13/10/12 8:39:33.432 AM appleeventsd[545]: main: Starting up
    13/10/12 8:39:33.435 AM kdc[538]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    13/10/12 8:39:33.451 AM com.apple.usbmuxd[518]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
    13/10/12 8:39:33.507 AM loginwindow[535]: Login Window Application Started
    13/10/12 8:39:33.508 AM kdc[538]: KDC started
    13/10/12 8:39:33.510 AM awacsd[549]: Starting awacsd connectivity-78 (Jul 26 2012 14:37:46)
    13/10/12 8:39:33.512 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13/10/12 8:39:33.513 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13/10/12 8:39:33.000 AM kernel[0]: macx_swapon SUCCESS
    13/10/12 8:39:33.513 AM awacsd[549]: InnerStore CopyAllZones: no info in Dynamic Store
    13/10/12 8:39:33.520 AM aosnotifyd[552]: bootstrap_look_up failed (44e)
    13/10/12 8:39:33.539 AM locationd[536]: NOTICE,Location icon should now be in state 0
    13/10/12 8:39:33.539 AM locationd[536]: locationd was started after an unclean shutdown
    13/10/12 8:39:33.611 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13/10/12 8:39:33.613 AM coreservicesd[27]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    13/10/12 8:39:33.615 AM mds[532]: (Normal) FMW: FMW 0 0
    13/10/12 8:39:33.619 AM WindowServer[567]: Server is starting up
    13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 retained (2 references)
    13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 released (1 references)
    13/10/12 8:39:33.635 AM WindowServer[567]: Session 256 retained (2 references)
    13/10/12 8:39:33.636 AM WindowServer[567]: init_page_flip: page flip mode is on
    13/10/12 8:39:33.000 AM kernel[0]: en0: 802.11d country code set to 'US'.
    13/10/12 8:39:33.000 AM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    13/10/12 8:39:33.898 AM fseventsd[144]: Logging disabled completely for device:1: /Volumes/Recovery HD
    13/10/12 8:39:34.000 AM kernel[0]: nspace-handler-set-snapshot-time: 1350110375
    13/10/12 8:39:34.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96  MAC AUTH succeeded
    13/10/12 8:39:34.831 AM WindowServer[567]: mux_initialize: Mode is dynamic
    13/10/12 8:39:34.847 AM WindowServer[567]: GLCompositor enabled for tile size [256 x 256]
    13/10/12 8:39:34.847 AM WindowServer[567]: CGXGLInitMipMap: mip map mode is on
    13/10/12 8:39:34.933 AM WindowServer[567]: WSMachineUsesNewStyleMirroring: true
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
    UUID 0x000006100000a00f00000000042803c0
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x5 for display 0x042803c0
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x6 for display 0x003f003f
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x7 for display 0x003f003e
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x8 for display 0x003f003d
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
    UUID 0x000006100000a00f00000000042803c0
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (1864, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (1865, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (1866, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    13/10/12 8:39:34.936 AM WindowServer[567]: CGXPerformInitialDisplayConfiguration
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x042803c0: MappedDisplay Unit 0; Alias(0, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[840 x 525], Rotation 0, Resolution 2
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1864,0)[1 x 1], Rotation 0, Resolution 1
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1865,0)[1 x 1], Rotation 0, Resolution 1
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1866,0)[1 x 1], Rotation 0, Resolution 1
    13/10/12 8:39:34.936 AM WindowServer[567]: CGXMuxBoot: Boot normal
    13/10/12 8:39:34.998 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x00004733, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
    13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004d23, unit 4, caps QEX|QGL|MIPMAP, vram 580 MB
    13/10/12 8:39:35.003 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    13/10/12 8:39:35.006 AM loginwindow[535]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    13/10/12 8:39:35.014 AM hidd[540]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    13/10/12 8:39:35.050 AM WindowServer[567]: Unable to open IOHIDSystem (e00002bd)
    13/10/12 8:39:35.092 AM WindowServer[567]: Created shield window 0x9 for display 0x042803c0
    13/10/12 8:39:35.092 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
    13/10/12 8:39:35.108 AM launchctl[585]: com.apple.findmymacmessenger: Already loaded
    13/10/12 8:39:35.124 AM com.apple.SecurityServer[15]: Session 100005 created
    13/10/12 8:39:35.146 AM hidd[540]: CGSShutdownServerConnections: Detaching application from window server
    13/10/12 8:39:35.146 AM hidd[540]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    13/10/12 8:39:35.163 AM loginwindow[535]: Login Window Started Security Agent
    13/10/12 8:39:35.223 AM SecurityAgent[594]: This is the first run
    13/10/12 8:39:35.223 AM SecurityAgent[594]: MacBuddy was run = 0
    13/10/12 8:39:35.249 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320  isBackBuffered: 1 numComp: 3 numDisp: 3
    13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.280987 AM [AirPlay] Started browsing for _airplay._tcp.
    13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.281405 AM [AirPlay] Started browsing for _raop._tcp.
    13/10/12 8:39:35.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    13/10/12 8:39:35.965 AM UserEventAgent[587]: cannot find useragent 1102
    13/10/12 8:39:36.935 AM WindowServer[567]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    13/10/12 8:39:36.955 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
    13/10/12 8:39:36.965 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
    13/10/12 8:39:37.000 AM kernel[0]: directed SSID scan fail
    13/10/12 8:39:39.274 AM SecurityAgent[594]: User info context values set for w00fa
    13/10/12 8:39:39.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96  MAC AUTH succeeded
    13/10/12 8:39:39.432 AM SecurityAgent[594]: Login Window login proceeding
    13/10/12 8:39:39.618 AM loginwindow[535]: Login Window - Returned from Security Agent
    13/10/12 8:39:39.631 AM loginwindow[535]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    13/10/12 8:39:39.657 AM loginwindow[535]: USER_PROCESS: 535 console
    13/10/12 8:39:39.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
    13/10/12 8:39:39.000 AM kernel[0]: AirPort: Link Up on en0
    13/10/12 8:39:39.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
    13/10/12 8:39:39.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
    13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: UserName
    13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: GroupName
    13/10/12 8:39:39.708 AM com.apple.launchd.peruser.501[610]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    13/10/12 8:39:39.712 AM loginwindow[535]: Connection with distnoted server was invalidated
    13/10/12 8:39:39.717 AM distnoted[615]: # distnote server agent  absolute time: 15.385943220   civil time: Sat Oct 13 08:39:39 2012   pid: 615 uid: 501  root: no
    13/10/12 8:39:39.000 AM kernel[0]: AirPort: RSN handshake complete on en0
    13/10/12 8:39:39.967 AM WindowServer[567]: Received display connect changed for display 0x42803c0
    13/10/12 8:39:39.998 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320  isBackBuffered: 1 numComp: 3 numDisp: 3
    Thanks!
    -w00f

  • New 27inch iMac, external Display "blinks" while in "Display Sleep"

    I just updated from a 24inch iMac to a 27inch iMac.
    I'm using the same setup for connecting the external display, which is a miniDisplay Port adapter(from Apple) to DVI, then DVI to the external monitor.
    All works fine until the "Sleep Display" kicks in, then the external monitor pops up the "DVI-I no signal" warning.  This is normal but instead of going away after a couple of seconds it begins to blink as if their is communications going on between the monitor and iMac.  So its blinking this message endlessly and thus the external monitor never really goes to sleep.
    Since this worked fine on the iMac 24inch, I'm assuming it has something to do with the "Thunderbolt" port, using a miniDisplay port adapter.
    The external monitor is a 20 inch Viewsonic VP2030b, running at 1600x1200.
    I added a YouTube video for clarity.  http://www.youtube.com/watch?v=Q7Zm_U_7sbc

    Go to: System Preferences > Displays select the Color tab > uncheck "Show profiles for this display only" and try one of the RGB profiles to see if it is better for you.
    Then if you are not happy with one of those..? Try Selecting, Calibrating and Saving a different Profile, other than the default one offered for that monitor.

  • External display no longer being recognized ideapad u310 touch with Win 8.1

    Several weeks ago I was able to attach a external monitor with a HDMI to DVI cable and it has been running without any problems until today when I turned on the laptop and nothing came up on the external display. Control panel only shows one display and will not detect the second display. Restarting has not help. No new programs have been added and nothing has been moved. I tried attaching a different external monitor and once again it could not be detected. Where do I go from here?

    Anyone have any help or suggestions? Thanks

  • X201s -- External display issues?

    So I've jumped with great anticipation on the X201S bandwagon this past month, with an X201S Core i7 640M, along with a self-added Intel X-25M G2 160GB SSD running Win7 Pro.
    It's a pretty sweet machine; if anything, it just outperforms anything I throw at it! However, I've been having some issues with docked power-on scenarios, where my external display just doesn't want to display anything.
    I did some more digging, and I'm suspecting that this may be a firmware-related issue, since usually when the X201S feels 'happy', I get the power-on POST screen on my external display, and everything works-fine from there.
    When I don't see the POST screen, I know I'm going to hit some trouble.  At this point, I'm 'headless' until I flip-open the notebook's screen, but even that screen is dark, until I login with my fingerprint reader, then start using FN-F7 (switch display), FN-F7 (again), then ENTER.  To switch display modes, and eventually OS will detect a device-driver crash on the display device, and then fall into display recovery mode (without AERO)
    "Display driver igfx stopped responding and has successfully recovered."
    Further analysis, leads to Dwm.exe which was at the latest display device driver version supported by Lenovo (v8.15.10.2025), and then I recently updated it from Intel's site, to v8.15.10.2085, and still no luck.
    It's definitely not a device-driver issue; since I would normally get a POST screen that is before the OS loads. Anyone have any insights, before I open-up a case with Lenovo?
    Cheers

    called lenovo, they just asked my driver version, system version....after verifying that my display is the latest one downloaded from lenovo, they suggested me run lenovo toolbox to examine compatibility issue....
    i'm pretty sure the toolbox won't find anything...and i'm pretty sure that customer representative won't help me solve this issue...
    how can we report technical related issues to engineers directly? 
    Current: X200, X201s (waiting)
    Retired: X31

  • Lion and external display

    Hi,
    When I wake up my MacBoo Pro usingto work with external display, my laptop gets very hot and I with Snow Leo I was used to open the lid to cool it down.
    It worked fine, because the laptop screen was black but with Lion I cannot do it because after opening the laptop lid I am getting immediately cloned desktop on my laptop.
    Is it possible to come back to the previous behaviour or somehow to switch-off the laptop screen after opening the lid, still with keeping the external display as active and main one?

    Hi tgr2007
    According to Apple support, it is "expected behaviour" under Lion for the MBP's internal display to reactivate upon opening the lid. A new version of the clamshell mode-related knowledgebase article (replacing HT3131) is due shortly confirming this.
    This is despite:
    - the obvious temperature-related benefits that were previously achievable (under Snow Leopard) by opening your MBP lid whilst continuing to output solely to a 27" cinema display
    - the complete and total waste of energy and graphics processing power in running two active screens if running your MBP in clamshell mode would otherwise make it too hot and/or noisy
    - the negative longer-term impact on the battery and other components from running the MBP at any hotter a temperature than it needs to be.   
    If you would like to have the previous behaviour restored, please join us (ie the many customers who are being adversely affected by this change) in lobbying Apple to change how Lion handles clamshell mode.
    Options available to Apple include changing Lion's expected behaviour or adding a user-selectable option within System Preferences.
    Please submit your feedback here:
    http://www.apple.com/feedback/macosx.html

  • Macbook Pro Retina Fan Speed with 3 vs 2 external displays

    Hello,
    When I'm in my home office, I often use my MacBook Pro Retina in Clamshell Mode (in a BookArc) with external displays.
    Originally, I used 2 external displays (2x 1920x1800), and the fan speed and temperature remained stable at the lowest end of the spectrum (around 2200rpm and 60°C). However, recently I decided to use all the ports available and plug in an extra monitor (1680x1050) for that extra screen real estate. I can tell you that having three external monitors really makes a difference to my productivity. However, just by adding this extra display, the fan speed boosts up to a minimum of 4500rpm and often goes up to around 6000rpm. The temperature is also high (I guess the fan speed is a symptom of this).
    I understand that the extra pixels in the 3rd monitor could definately tax the GPU more. However, I am suprised that the fan speed and GPU temperatures go so high, especially as all I am doing is moving around on a Preview PDF file, just from adding the extra monitor (especially with it's modest resolution).
    I guess my questions are:
    Is this expected behaviour for the rMBP?
    Is this going to damage my rMBP with extended use (say, a good 6-8 hours pretty much every day for the next few years)?
    Thanks very much,
    Richard

    I've managed to get the fan speed down to a reasonable, less audible level by using that old VRAM terminal command to enable me to keep the internal display disabled whilst the lid is open. I've had to shift quite a lot round on my desk to make this happen, but I guess it was the only way. It now runs 3 screens under similar loads at approximately 3500prm.
    Taking your advice into consideration, I raised the rear feet and this enabled further decrease in fan speed. I guess one of those laptop stands will augment this effect, and I will look into them.
    Anyway, thank you for your help!
    Thanks,
    Richard

  • Why does my external display go to sleep when opening an X11 window?

    I'm on a 27in late 2012 iMac with Yosemite. I recently added an external monitor connected through one of the Thunderbolt ports (with a VGA adapter). I use X11 frequently - when I open an X11 program in the external monitor or drag an X11 window into that space, much of the time the display goes to sleep immediately, until I either drag the window back out or exit X11. Does anybody know why this is happening? Sometimes I can open X11 applications right through terminal in the new display, but even then they frequently look unstable, flashing and blinking.
    Thank you!

    Try resetting PRAM and SMC.
      Reset PRAM:   http://support.apple.com/kb/PH14222
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    "Resetting SMC on portables with a battery you should not remove on your own".

  • How to wake up opened MacBook from sleep -x only external display running

    How to wake up opened MacBook from sleep - only external display running? I dont shut down my MacBook and I am using only external monitor. Lid closed it is not good idea, sometimes is MacBook and main MacBook display to warm. So I must six times per day open and close my MacBook. Any solutions?

    Sure, the added heat sink and dissipator will help. Although a gel pad has a lot of heat capacity, meaning it has the ability to absorb a lot of heat, eventually it will saturate with heat from the MB and reach a point of stasis. Then it gets rid of heat the same way the Mac does, namely radiation and conduction into other things around and in contact with it, including air. Of course the Mac has a fan if it needs it. The gel pad doesn't.
    If the gel pad is sitting on a metal surface, like a steel file cabinet or something like that, it helps to drain the heat away from the pad, and by extension, the Mac. The aluminum cookware worked like that. I had heat capacity of its own, but more importantly, it added to the surface area that was performing convection cooling. So, yes, both together give a better result.

  • Alternative External Displays

    Is anyone out there using a Collins CinemaView 24 external display with their 2011 MBP? If so, how is it working?

    Noel Carboni wrote:
    I've been eyeing workstations on eBay, and given that the very newest brand new designs incorporating things like Sandy Bridge processors are *just* out, the off-cutting-edge workstations haven't really dropped in price yet.  I'm hoping they will soon.
    That said, this is actually a very decent deal, and within your $2K budget.  You might want to add a bit more hardware (good ATI video card, possibly some additional disk space).
    http://www.ebay.com/itm/Dell-Precision-T5500-T5400-Six-Core-6C-Xeon-2-66GHz-X5650-24GB-500 G-4900-Retail-/251120814714?pt=Desktop_PCs&hash=item3a77f78a7a
    A single 6 core X5650 Xeon is formidable, but you have the option of adding a second (identical) processor to it at some time in the future when X5650 processors come down in price.  Ultimately you'll end up with 12 cores, 24 execution threads (hyperthreading), and a system that rates 15,516 on a scale where the highest of high-end systems today rate 32,960 (source:  Passmark benchmark site).
    I know you asked about laptops.  Sorry to take the thread in a bit of a sideways direction.
    -Noel

Maybe you are looking for

  • PDF Viewer Bookmarklet

    As a user of Chrome in linux, there are still some things that are broken. For example, whenever I load a PDF, most of the time the Docs PDF Viewer extension will display it properly. However, there are still times where the PDF doesn't load properly

  • Dynamic file parameter with include directive

    I would like to include the file path contained in a string variable with the include directive. I'm trying to do the following: <% String var_fileToInclude = "inc/topnav_" + var_sectionType + ".jsp"; include file=var_fileToInclude; %> I get the foll

  • I've got a greyed out circle next to songs that I am trying to put on my daughter's iPhone 5c.

    I've looked up previous discussions and to be honest have no idea how to fix the issue.  I've tried manual sync, auto sync, deleted, redownloaded and tried again to no avail.  I don't understand some of the posts that have been out there on changing

  • Double replacement using repalceAll methot of Matcher

    Hi all, I'm using the java.util.regex package in my program. I have noticed that this code Pattern p = Pattern.compile(".*"); Matcher m = p.matcher ("anystring"); String s = m.replaceAll ("otherstring"); it like produce a wrong result, the string s g

  • Prime Lobby Ambassador defaults scheduling guest users

    Hi. I'm actually testing Prime Infrastructure and one important thing there for me is the Lobby Ambassador feature. I want to give our colleagues from other sites the possibility to create guest accounts on their own, but with some defaults already s