Adding a field in further selection option when using PNP
when we run a report using PNP we get a further selections button on top. can we add a new field like molga, in that further selection option if yes then how...can someone help me on that.
Hi,
I guess the Report your using must be SAP standard report.If yes, then you have to copy that program to some Z-program & make the change in the program itself.
Because this logic is in program itself.
This is the only way.
Correct me, if I am wrong.
Can I know the name of the report?
Thanks,sarika.
Similar Messages
-
Select-options when Using PNP logical database
Hi ,
We get a default selection screen when we use logical database in HR ABAP.
But we always get the selection elements as "PARAMETERS" and not as "SELECT-OPTIONS".
How can we change it to select options ....
I tried all the options in HR- Report categories but it is not working..
Kindly Help..
Regards,
Ashwin.Hi,
execute the program. In the selection screen
For eg:
personel Number select the Mutiple Selection option. After that select the tab select intervals and u can give the range.
Regards,
Srinivas -
Adding a field to free selection option in F110 using BTE 00001820
Hello,
I am trying to activate BTE 00001820 so i can add the user name field to the free selection prameters screen in F110.
Did all the configuration in FIBF, creat a Z for the relevant function.
I added a break point inside the function expecting to go inside it when i activate the free selection tab in F110.
No matter what i do the function is not activated.
I would appriciate your help with the issue.
Thanks,
Arnon.Hi,
I think the option is not available.
VVR -
Can I skip selection screen when using PNP & HR Report Cat?
I am using log. database PNP for my report that we are then accessing through ITS - ESS. I do not want the ESS user to see the selection screen (It populates all values in initialization). I have created an HR Report category with nothing selected, but I still get pernr as a selection.
Is there a way to skip the selection screen? (Sorry, this might be very simple and i'm missing something!)
Thanks so much!!!!Well, I'm thinking that you would have to have a short "driver" program.
report zdriver.
submit <zreport> and return.
Regards,
Rich Heilman -
I can't find "warp" option when using lasso tool
Hi. I currently have Photoshop Element 8 (version 8.0). I can't find the "warp" option when using lasso tool. Do I need to upgrade??
You are on the wrong forum, there is a differetn forum for elements.
In Photoshop the warp option is available regardless of whether you have used the lasso tool or not.
In Photoshop, you can quickly get to warp by
Make lasso selection
CMD T to transform
CTRL click to get the warp contextual menu -
Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces? The Nio reads hte guitar but GB doesn't....
Usually effects packages are AU plugins that would have no effect on track selection. Interfaces should have no control over what kind of track you can select. I really think something else is going on her maybe something you overlooked.
Did you choose the input channel in the track info pane. Try both channel 1 mono or channel 2 mono. Make sure the track is record enabled. -
HT1688 what is the HDR option when using the camera?
What is the HDR option when using the camera and why is it important to me?
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.
-
How to avoid the truncation of field values in select-options
Hi all,
I have a requirement where i have used select-options to select multiple filenames. I have taken the filename of type rlgrap-filename(128 char) But the problem is in select-options if the values of the filename which is selected has length ( i.e the length of the selected field value) exceeds 45 character , then he remaining charactes are truncated. Hence i am not able to get the
correct field value in the internal table of the select-options.
i came to know that if NO_DISPLAY addition is used then this truncation wont occur. But in my case user has to select the files and hence this addition cannot be used.
please let me know if anyone has a solution for this or if there is any other way to select multiple entries in selection screen.
Regards
Manipal parkalarlgrap-filename is having the length of only 128 characters.If the file path exceeds 128 characters then the rest will get truncated.If you file name exceeds more than 128 characters and the pafth is fixed,then harcode the entire path in the program and later on concatenate the path and the file name into a string which can be used for further processing.
paramters:p_file like rlgrap-filename.
here just give the filename as say 1234.XLS.(Assuming that you are not browsing for the file using F4_filename).
In the program harcode the path say C:\Documents and setting\sapworkdir\user\.
Now concaternate these two and pass it to string which can be used for further processing.
If the user intneds to browse the file and the path name exceeds 128 characters then follow the way to delcare the paramter in the selection screen as said above.If it is working for parameters then I think it should be working for select option also. -
Adding additional field 1 to selection screen of CATSSHOW (CADO)
Hello all,
We recently added one of the additional field's to show up on the data entry section when using
transaction CAT2...This is working fine and the data is entered into CATSDB.
When using CADO, one can display the addtional field 1 and sort by this field.
However, the users now want this additional field1 to be one of the selections when they
use report CATSSHOW (CADO).
Is there some type of way to configure SAP to have one of these additional fields show up
as a selection field on program CATSSHOW (CADO)? My searches in this forum and the web
have not shown me a solution yet.
Or do I have to create a 'Z' version of CATSSHOW like ZCATSSHOW and do this myself?
Thank-you,
Rick CrawfordEnhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better . -
Alternative for field exit on select-option
Good afternoon,
I know that field exit doesn't work for select-option (SAP Note 29377, point 11) but i want to know if it exists an alternative (I use SAP 4.6, and an update to ECC6 is expected next month).
The field exit would be the best option because we must add exit in many transaction (approximately 100) in little time.
Thanks for your answers,
Best regards,
Anne.Hi
A) Are there any way for debbuging field exit?
The trick to debug the field-exit is to download the data to a file on application server;
B) How run the field exits on field no editable?
It can't do it, because a field-exit is triggered as soon as a value of the field is changed.
D) Is used the field exit on version >= 4.6C
SAP doesn't support the field-exit from realese 4.7: the field-exit still works on the realese 4.7 and, I suppose, 5 and 6.00: but it doesn't work for enjoy transactions.
Anyway I believe it's better to replace the field-exit with a new solution from realese 4.7
Max -
Is possible in a dialog screen attach a field functional like select-option
hi,
Is it possible - in a dialog screen - to attach a field that has functionality like Select-options fields?
And if so - how?
and information about complex_selections_dialogHi,
Look at the below links
module pool programming " to add selection-option on screen"
module pool programming " to add selection-option on screen"
Regards
Sudheer -
ZScreen(SE51) Input field should have Select option
Hi ,
I need to create one Select option on Screen designed using screen painter .
Later I want to use in PAI of screen in select query as Select option .
Mean to say in where clause of select query i have to use <b>IN</b> for that input field .
Looking for some helpful responses .
SSHi,
You can create a selection screen by using the normal SELECT-OPTIONS command as a subscreen and then call the subscreen in your main screen.
SELECTION-SCREEN BEGIN OF SCREEN scr AS SUBSCREEN.
call the sub screen using normal command.
CALL SUBSCREEN b INCLUDING prog dynnr .
regards,
Mahesh -
Having seleted some text on a web page which is the only information I would like to print, I seem to be unable to preview what the printed page will look like using the "Selection" option in the Print Range section of the "Print" Menu from the Print Preview window. The radio button for "Selection" is not selectable!
I am able to do this using Internet Explorer, which is probably my main reason for using that browser but would like to use a similar feature in FirefoxThat connection is supported for tethering....
Barry -
Adding default value for a select-options in a selection-screen
hello gurus,
i have a report program with the following select-options in a selection-screen block:
select-options: so_site for MyTable-werks.
i want the so_site to have a default value once the program displays. can it be possible?
regards,
sidHi sid,
1. Whenever we use select-option,
an internal table of type range is
automatically created.
2. so, in fact, we have to put
record in this internal table.
3. eg. Just copy paste in new program.
4.
report abc.
tables : t001.
select-options : bukrs for t001-bukrs.
initialization.
bukrs-sign = 'I'.
bukrs-option = 'EQ'.
bukrs-low = '1000'.
append bukrs.
regards,
amit m. -
Select options for the pnp logical database.
Hi ,
We get a default selection screen when we use logical database in HR ABAP.
But we always get the selection elements as "PARAMETERS" and not as "SELECT-OPTIONS".
How can we change it to select options ....
I tried all the options in HR- Report categories but it is not working..
Kindly Help..
Regards,
Ashwin.>
ASHWIN JOHARI wrote:
> Hi ,
> But we always get the selection elements as "PARAMETERS" and not as "SELECT-OPTIONS".
> Ashwin.
Which fields? Almost all of them are defined SELECT-OPTIONS.. you dont' see the range option directly.. click on he options icon & you can enter the ranges.
~Suresh
Maybe you are looking for
-
How to set up multiple NLS_LANG or update the NLS_LANG in windows registry
Hi! In our server machine, we have installed the Oracle Net Manager Version 10.2.0.0.0, which is used to connect to different oracle databases in different NLS_LANG settings (i.e., JA16SJIS, KO16KSC5601, WE8ISO8859P1). Currently, our NLS_LANG is set
-
How can i use a wmv file in FCP ... urgent !!
Hello I created a PowerPoint presentation (45 minutes with full animations recorded) (on my PC laptop) that I now have to add audio to. I saved it as a video (of course, it's .wmv format) and was going to add the audio and adjust the bits in Final Cu
-
How to add a custom button?
Hello Gurus, I'm very new to FPM and I got a question regarding to adding a custom button in portal. I have read some documents but couldnt figure it out. Can somebody please clarify the issue? Thanks in advance. Ferhat Edited by: iltern on Feb 29, 2
-
Streaming Apple TV through a PVR?
Does anyone know if it is possible to stream Apple TV through a Bell PVR? I have an older (not flat screen) TV that does not have a HDMI port but I do have a Bell PVR with an HDMI port. Does anyone know if I can use Apple TV through the PVR and not d
-
How PI uses technical system information in SLD
Hi Experts, I know there are business system and technical system registered and associated in SLD. Especially for those SAP systems, in our normal PI scenario, how PI uses the technical information which was registered under Technical System in SLD