Adding a field in infotype 0009

Hi,
I have a requirement where in i have to add a filed in the infotype 0009.
For this i have added the field in the structure ps0009 through append structure. But i have to get the filed in the sceen. Please let me know how to do this.
I have gone to PM01 transaction and for infotype 0009 went into module pool option button and clicked on create screen then its asking for the access key as this is the standard infotype. But i dont know how many screens are related to this infotype as the access key for all the screens is different. I took access for 2 screens but not sure how many screens are there.
Please advice how to proceed.
Thanks,
Raju

Hi raja,
1. The screen numbers starting with 2
  are the ones which will show the data for entry purpose.
2. So while doing pa30, check the exact screen number,
  which comes in your case (this is country dependent / customizing dependent)
3. Then accordingly u can enhance those screen.
regards,
amit m.

Similar Messages

  • Adding a field to infotype 554 with PM01

    I was adding this field to infotype 0554 via PM01 and while I was generating the objects I got this error.
    Structure HCMT_BSP_PA_US_R0554 does not exist
    Message no. PG361
    Diagnosis
    The structure HCMT_BSP_PA_US_R0554 does not exist in the Dictionary.
    Procedure
    Please create the structure before executing any further actions.
    Any ideas how to solve this?
    Thanks,

    yes it is public sector.
    I went to PE03 and found molga 10 assigned to US.
    not sure how to check for PMI

  • Adding field in infotype 0009

    Hi,
    I have a requirement where in i have to add a filed in the infotype 0009.
    For this i have added the field in the structure ps0009 through append structure. But i have to get the filed in the sceen. Please let me know how to do this.
    I have gone to PM01 transaction and for infotype 0009 went into module pool option button and clicked on create screen then its asking for the access key as this is the standard infotype. But i dont know how many screens are related to this infotype as the access key for all the screens is different. I took access for 2 screens but not sure how many screens are there.
    Please advice how to proceed.
    Thanks,
    Raju

    Hi raja,
    1. The screen numbers starting with 2
      are the ones which will show the data for entry purpose.
    2. So while doing pa30, check the exact screen number,
      which comes in your case (this is country dependent / customizing dependent)
    3. Then accordingly u can enhance those screen.
    regards,
    amit m.

  • Additional field in infotype 0009 issue ( PBO and PAI )

    Hi Guru,
    I need your help please.
    I have a additional field in IT0009 and when I want created a new infotype 0009, I fill all field but after ENTER or SAVE all field are save in the layout but not the additional field.
    To save the additional field in the layout, I must fill it again and after the ENTER or SAVE the field is save in the layout.
    I have checked in the debbugger, when I create a new infotype 0009 it goes to the PBO but after ENTER or SAVE it doesn't go to the PAI so I must do it again ( fill the additional field and ENTER or SAVE ) and then it goes to the PAI.
    Thus I would like to know how I can make so that after the ENTER or SAVE the screen goes in PAI before the PBO and at the first time.
    Thanks very much in advance.
    Regards.

    Hi Srini Vas, hi Pedro Guarita and thanks for your reply,
    After more investigation, the probleme come from a check over country bank.
    In fact, the screen of the infotype 0009 must be adpated following the country bank but to do this, the standard module pool (mp000900) check if the country bank have changed.
    call method cl_hrpad00_iban=>process_iban_pai
          changing
            cs_bankdata = ls_bank_data_current
          exceptions
            error_iban  = 1
            others      = 2.
        if sy-subrc <> 0.
          message id sy-msgid type sy-msgty number sy-msgno
                     with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        endif.
        call method cl_hrpad00_iban=>get_bank_data_old
          importing
            bank_data_old = ls_bank_data_old.
        if ls_bank_data_current-banks <> ls_bank_data_old-banks. "MELN1357200
    bank country changed -> leave screen needs to be done
          leave_screen = 'X'.
        endif.
    But when you create a new infotype 0009, the ls_bank_data_old-banks is always initial. So when module pool compared the ls_bank_data_old-banks with the ls_bank_data_current-banks, those are always different.
    In conclusion, when you create a new infotype 0009 it is always mandatory to push ENTER before to fill any additional field because at each first time that the standard module pool go in the PAI, it make a leave screen.
    Thanks in advance for all yours reply.

  • New field in Infotype 0009- to update IFSC Code- SAP Note Required

    Dear consultants,
    One of my client want to maintain their employees IFSC code in the Infotype 0009, where one new field required for this to update IFSC number.
    Which SAP note can fulfill this requirement, please do needful.
    Thanks & Regards,
    Navesh

    Dear Supriya,
    Thanks for quick responce, It is helpful. pelase do needful on below issue.
    http://scn.sap.com/thread/3517340
    Regards,
    Navesh

  • Bank account number field in Infotype 0009

    Deal All,
    My client's requirement is that in IT0009 the length of Bank account number (BANKN) needs to be increased for a particular affiliate. Currently the length is 18 Character and my client wants to increase it to character 20 for a particular affiliate.
    Can anyone please let me know is it possible to do it. If it is not possible then what can be the other alternatives to met the requirement and the impacts of the alternatives.
    Thanks & Regards,
    Sandip Biswas.

    Dear Sandip,
    Please refer to SAP Note 193078 - Employee/applicant bank details in Russia.
    Maybe it is nor specific for your case but SAP recommends to maintain first two digits in Bank key field.
    Please make sure whether this solution works for your case.
    Regards,
    Dilek

  • Problem with adding output field in Bank Details(Infotype 0009)

    Hi All,
    I hav a criteria like, when i select a value for a field corresponding value should be displayed in input/output field just beside the selected field.
    To make you understand the criteria more clearly.In infotype 0009 we hav Bank key.When we select a bank key corresponding Bank name is displayed just beside Bank key field.How to achieve that functionality.
    Can anyone help please. Its urgent...
    Thanks a lot...
    Sandeep.

    To make my question more clear.I have created a new field in bank details infotype.Similar to the field Bank key in 0009 Infotype.As soon as a select the Bank no through F4 functionality i want the Bank no no to be selected and at the same time i want Bank name to be displayed just beside this field.
    In short with 1 selection i want both Bank no n Bank name to be selected.
    If i hav ti write the code where should i write the code.I hav also created a structure .I presume i need to write a logic for this requirement.But i dont know where to write the logic.

  • Adding additional text field to infotype in SQ02

    Hi ,
    I am trying to create an additional text filed to the infotype 0034 in a customized infoset, in Tx SQ02 as shown in the link below:
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/cb4468455611d189710000e8322d00/content.htm
    Here the question is :
    The check box "Detemine LIKE reference using text field" is grayed out and I couldn't able to check the box.
    Can any one help me to resolve this and let me know what is the significance of that check box?

    Hi Suresh,
    I tried running the query after deleting the newly added text fields to the infoset, the query is running properly with out any short dump, where as with the additional fields added it is going to short dump and the shot dump states as shown:
    An exception occurred. This exception is dealt with in more detail below          
    . The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_FUNC',    
    was neither                                                                      
    caught nor passed along using a RAISING clause, in the procedure "%_GET_PERNR"    
    "(FORM)"                                                                         
    Since the caller of the procedure could not have expected this exception          
    to occur, the running program was terminated.                                    
    The reason for the exception is:                                                  
    The program "!QZZ/SAPQUERY/H2AAVULA27174228" contains a CALL FUNCTION             
    statement. The name                                                              
    of the function module to be called is "RPAQ_GET_AF_0034".                                                                               
    No function module exists with the name "RPAQ_GET_AF_0034".                       
    All function modules are stored in the Function Library (SE37).                                                                               
    Possible reasons:                                                                 
    a) Wrong name specified. Particular attention should be paid                      
       to upper/lower case and underscores ("_")                                      
    b) Transport error                                                                
    c) If an enqueue/dequeue module has been used, the lock object                    
       may not have been activated (ABAP Dictionary)         
    Any help?
    Best regards
    Vamsi

  • Adding new fields in Custom Infotype

    Hi,
    I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
    Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
    & hiding the old tab.
    Please let me know procedure for  Adding new fields in Custom Infotype for displaying in new tab.
    Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
    Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

    Please search. Lot of Threads on this.
    Follow these steps.
    Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the u2018Employee Infotypeu2019 radio button.
    4) Select the u2018PS Structure Infotypeu2019.
    5) Click on Createu2026 A separate table maintenance window appearsu2026
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on u2018Allu2019 push button. It takes a few moments.
    10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
    11) Click on u2018Changeu2019(pencil) button
    12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
    13) Give u2018T591Au2019 as subtype table
    14) Give u2018T591Su2019 as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
    18) Click on u2018Changeu2019 (pencil) button
    19) Click on u2018New Entriesu2019
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirementu2026
    25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
    27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Donu2019t forget to u2018Activate at every level
    i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
    The above details are from the following link
    Re: How to add fields in custom infotype and update its screens

  • Canu2019t see the street/house number field anymore in infotype 0009

    Hi Experts,
    I am not able to see the street/house number field anymore in infotype 0009 in system  Whatever I tried to change in T588M we didnu2019t get it back on the screen. Does any one idea of this.Please help
    Mukesh

    Hi Mukesh
    As far as I am aware /house number field STRAS is not standard in infotype 0009 screens
    Its likely then importing new code from SAP has perhaps overwritten some of your customizing in this case?
    Please see if note 431930 helps you retrieve field STRAS on IT0009 - even though this note is provided by SAP - use of STRAS is in 0009 is considered a modification
    Best wishes
    Stuart

  • Adding a bank key directly in infotype 0009 (Bank details)

    Hi,
    in the infotype 0009, I want to enter a bank key that is not in the bank master data.
    Is it possible to configure the system so that a new bank key can be created directly in the infotype 0009 if it doesn't exist, rather than using the transaction FI01 ?
    Regards,

    Can u tel me the actual requirement ?!!!
    Y do u want to make it Optional ??
    By standard, it is mandatory only when Payment type is Transfer/Cheque....
    Then Bank Key is obvious...isnt it....
    Otherwise, on which bank, the cheque has to be prepared... hw do u come to know ?
    My suggestion, dont change it!!!
    Regards
    ...Sadhu

  • HR - PA (Infotype 0009)

    Dear All,
    Wantu2019s to know if In Infotype 0002 that is Personeel data There area changes made to the Name, then how Infotype 0009 that is bank details name will get changed to the new as when change made to Infotype 0002, it is not getting reflected in Infotype 0009.
    Thanks

    Actually what happens is that when you are creating a new record in infotype 9, the field EMFTX is filled by field ENAME of infotype 1, as you can see in the screen logic of MP MP000900.
        IF Q0009-EMFTX EQ SPACE.
          IF EMFTX EQ SPACE.
    *       PERFORM FILL_EMFTX.                                 "QNUK60593
            MOVE P0001-ENAME TO EMFTX.                          "QNUK60593
          ENDIF.
          MOVE EMFTX TO Q0009-EMFTX.

  • Adding custom fields to Embedded Search

    Hi All,
    I have read the post [here|How to add custom fields to Embedded Search; about adding custom fields to Embedded Search. I am looking to add Employee Subgroup for use in Talent Management (specifically the STVN SuccessionPlanning component) and wanted to know if anyone can expand on the instructions in the link to add this field.
    It appears to be part of the HRTMC_PERSON search object connector already and while I've done some IMG configuration the field is showing in SuccessionPlanning, but not displaying any data.
    Additionally, I'd be interested in any tips to add information that is not from PA0002 should it be required in the future.
    Many thanks,
    Luke

    Hi Luke,
    I am assuming here that your search request fields are based on HRTCM_CENTRALPERSON search template. To enable your search to work on employee subgroup please do the following
    1) Check if the HRTMC_PERSON Template extracts the data from Infotype 0001 via SPRO node 'Define Search Models and Change Pointer' Extraction Class is 'CL_HRTMC_SEARCH_READ_PA_INFTY'.
    2) Via ESH_COCKPIT, goto Template Modeler and select your custom Software Component and press Edit. Goto roadmap step 5 - Define Requests - where all search request fields are defined. Its using these fields Talent search works.
    3) Select the search request e.g. 'SAP_TALENT_NAKISA', it would then show list searchable attributes in below table. Using 'Add' button select path for PERSK so that it can searched.
    It would look like this once selected
    OBJID(REL_CP_P)->HRTMC_REL_CP_P_209.REL_CP_P(REL_CP)->HRTMC_PERSON.OBJID->HRTMC_PERSON.ORG_ASSIGNMENT
    4) In step SPRO 'Define Search Requests and Search Field Names' , define Employee subgroup field with AliasSearchField = PERSK since thats what is defined in roadmap step 5.
    Hope it helps!
    Regards,
    Ricky Shah

  • "500 internal server error" after adding custom fields to Address page

    I need to display custom fields on the "Addresses" and the "Personal Data" pages. For that, we added custom CI_INCLUDE fields in both PA0006 and PA0002 tables as per instructions below
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&focusedCommentId=28278867
    we also extended the Badi HRPAD00INFTYUI
    custom fields show up OK in page "Personal Data". However when trying to browse to page "Addresses"
    we get the following error:
    "500 internal server error - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedNodeInfo(DetailView.SelectedInfotype): unknown child node Area8 ".
    "Area8" is one of the custom fields we added in PA0006 (Address infotype).
    any idea what is wrong?  maybe Badi HRPAD00INFTYUI cannot handle 2 infotypes in the same time?
    T.

    Hi Sasu,
    Its clearly saying contect binding error. Have you mapped  correctly from FcComponent to VcComponents.
    FcCompoenets for Model logic.
    Check the mappings correctly.
    If it is complete custom or new field then there will be could of steps.
    1) Reimport the model
    2) map new field to FcComponent
    3) Bind new Fields from Fc to Vc
    Rgds
    -SS

  • How to add one more field in infotype and PA 30 screen

    Hi to all
    My requirement is to add a new field in infotype and that should be reflected in PA30 screen.
    Actually in my company one field require from which date the car allowance is started.
    For that one date field is require on PA30 screen ..
    Also suggest me which screen is suggestable for that. and also give me any othe way is possible.
    Thanks & Regards
    Anubhav

    Yes .. I added the field in the structure but that field is not reflecting in PA30 screen.
    please advice me .. what to do...
    Thanks..
    Anubhav

Maybe you are looking for