Adding a field to free selection option in F110 using BTE 00001820

Hello,
I am trying to activate BTE 00001820 so i can add the user name field to the free selection prameters screen in F110.
Did all the configuration in FIBF, creat a Z for the relevant function.
I added a break point inside the function expecting to go inside it when i activate the free selection tab in F110.
No matter what i do the function is not activated.
I would appriciate your help with the issue.
Thanks,
Arnon.

Hi,
I think the option is not available.
VVR

Similar Messages

Adding a field in further selection option when using PNP

when we run a report using PNP we get a further selections button on top. can we add a new field like molga, in that further selection option if yes then how...can someone help me on that.

Hi,
I guess the Report your using must be SAP standard report.If yes, then you have to copy that program to some Z-program & make the change in the program itself.
Because this logic is in program itself.
This is the only way.
Correct me, if I am wrong.
Can I know the name of the report?
Thanks,sarika.

How to make field ( F110V-LIST1 ) mandatatory in free selection tab of F110

hi
How to make field ( F110V-LIST1 ) mandatatory in free selection tab of F110
regards,
Billa

Hi,
Standard transaction variant is not possible ,i dont want to use as zf110.
Regards,
Billa
Edited by: Billa Mahe on Sep 3, 2010 3:14 PM

Checking against Select-Options with "CP" using "IF value IN select_option"

Dear experts,
first of all: I'm sorry, if this question already should have been asked and answered!
I tried quite a lot of search terms but didn't find anything helpful.
We are using a statement like "IF value IN select_option" to perform comparisons after the Select-Options have been used in a SELECT statement. This logical expression fails (compared to the results of the DB-SELECT) whenever a select-option line contains the option CP (Contains Pattern). To be more specific: The case sensitivity of the LOW value doesn't seem to play a role any more. A variable with the value 'ABCD' would be positively checked against a select-option with OPTION 'CP' and LOW 'abc*', whereas this value wouldn't have been selected if the select-option had been used in a DB-SELECT.
Does anybody know a workaround?
Thanks in advance
Andreas

Dear Keshav,
it's an own field in an own table, defined as CHAR of length 140 (lowercase allowed), reflecting to a line of remittance info of an account statement. A regular Select-Option for this field is provided in a report which works perfectly fine regarding the case sensitivity. For reasons I don't want to point out in detail we need to check a value in this field against the select-option without selecting it from the db again.
Let's assume that a field remittance_info contains the value 'ABCD'.
A line of the select-option table looks like this:
select_option_table-SIGN = 'I'
select_option_table-OPTION = 'CP'
select_option_table-LOW = 'abc*'.
Then an ABAP statement such as
IF remittance_info IN select_option_table.
* would be true !!!
ENDIF.
but wouldn't deliver a result in a SELECT such as
SELECT * FROM my_table INTO TABLE my_internal_table WHERE remittance_info IN select_option_table.
because of the differences in lower/upper case.
regards
Andreas

How to give values to the field in free selection via call transaction?

Hi,
I'm using call transaction for transaction "FAGLB03". And i'm passing the values for the fields company code, account number and year using the respective parameter id. But i need to pass the value for Profit center also, which is in the free selction button (near to variant button). I have tried by passing the value thorugh the parameter id. but it is not taking up. The code is as follows:
 SET PARAMETER ID 'ACC' FIELD lv_saknr.
 SET PARAMETER ID 'BUK' FIELD lv_rbukrs.
 SET PARAMETER ID 'GJR' FIELD lv_ryear.
 SET PARAMETER ID 'PRC' FIELD lv_prctr.
 CALL TRANSACTION 'FAGLB03' AND SKIP FIRST SCREEN.
Here the value of profit center is not filling up in the screen.
If anybody have any clue please replay back.
Thanks in Advance.

Hello Pothiraja
If the free selection parameter cannot be filled this way you may try to call the corresponding report using the SUBMIT statement. SUBMIT has the option
... WITH FREE SELECTIONS texpr
For details refer to the ABAP keyword documentation for SUBMIT -> selscreen_parameters.
Regards
Uwe

Problem adding new field to free goods Determination

Hi everyone. We need to add a new field for Free Goods determination. According to the documentation in SPRO, the new field should be added in SE11 KOMK under include KOMKZ for free goods.
However there is no KOMKZ include in KOMK. How is this supposed to work? We have succesfully added fields for pricing,using KOMKAZ but... I cant find KOMKZ, the is a error in SPRO documentation or what Im doing wrong?
"New fields for free goods determination are added in the following INCLUDES:
Header data in KOMKZ (INCLUDE in KOMK, KOMG)
Item data in KOMPZ (INCLUDE in KOMP, KOMG)"
Someone could tell me how u do it to add a field for Free Good determination ?
Thanks!

It seems to ve a Typo Is not KOMKZ I used KOMPAZ include and worked fine after checking the customozing.

How to avoid the truncation of field values in select-options

Hi all,
I have a requirement where i have used select-options to select multiple filenames. I have taken the filename of type rlgrap-filename(128 char) But the problem is in select-options if the values of the filename which is selected has length ( i.e the length of the selected field value) exceeds 45 character , then he remaining charactes are truncated. Hence i am not able to get the
correct field value in the internal table of the select-options.
i came to know that if NO_DISPLAY addition is used then this truncation wont occur. But in my case user has to select the files and hence this addition cannot be used.
please let me know if anyone has a solution for this or if there is any other way to select multiple entries in selection screen.
Regards
Manipal parkala

rlgrap-filename is having the length of only 128 characters.If the file path exceeds 128 characters then the rest will get truncated.If you file name exceeds more than 128 characters and the pafth is fixed,then harcode the entire path in the program and later on concatenate the path and the file name into a string which can be used for further processing.
paramters:p_file like rlgrap-filename.
here just give the filename as say 1234.XLS.(Assuming that you are not browsing for the file using F4_filename).
In the program harcode the path say C:\Documents and setting\sapworkdir\user\.
Now concaternate these two and pass it to string which can be used for further processing.
If the user intneds to browse the file and the path name exceeds 128 characters then follow the way to delcare the paramter in the selection screen as said above.If it is working for parameters then I think it should be working for select option also.

Alternative for field exit on select-option

Good afternoon,
I know that field exit doesn't work for select-option (SAP Note 29377, point 11) but i want to know if it exists an alternative (I use SAP 4.6, and an update to ECC6 is expected next month).
The field exit would be the best option because we must add exit in many transaction (approximately 100) in little time.
Thanks for your answers,
Best regards,
Anne.

Hi
A) Are there any way for debbuging field exit?
The trick to debug the field-exit is to download the data to a file on application server;
B) How run the field exits on field no editable?
It can't do it, because a field-exit is triggered as soon as a value of the field is changed.
D) Is used the field exit on version >= 4.6C
SAP doesn't support the field-exit from realese 4.7: the field-exit still works on the realese 4.7 and, I suppose, 5 and 6.00: but it doesn't work for enjoy transactions.
Anyway I believe it's better to replace the field-exit with a new solution from realese 4.7
Max

Is possible in a dialog screen attach a field functional like select-option

hi,
Is it possible - in a dialog screen - to attach a field that has functionality like Select-options fields?
And if so - how?
and information about complex_selections_dialog

Hi,
Look at the below links
module pool programming " to add selection-option on screen"
module pool programming " to add selection-option on screen"
Regards
Sudheer

ZScreen(SE51) Input field should have Select option

Hi ,
I need to create one Select option on Screen designed using screen painter .
Later I want to use in PAI of screen in select query as Select option .
Mean to say in where clause of select query i have to use IN for that input field .
Looking for some helpful responses .
SS

Hi,
You can create a selection screen by using the normal SELECT-OPTIONS command as a subscreen and then call the subscreen in your main screen.
SELECTION-SCREEN BEGIN OF SCREEN scr AS SUBSCREEN.
call the sub screen using normal command.
CALL SUBSCREEN b INCLUDING prog dynnr .
regards,
Mahesh

Adding default value for a select-options in a selection-screen

hello gurus,
i have a report program with the following select-options in a selection-screen block:
select-options: so_site for MyTable-werks.
i want the so_site to have a default value once the program displays. can it be possible?
regards,
sid

Hi sid,
1. Whenever we use select-option,
an internal table of type range is
automatically created.
2. so, in fact, we have to put
record in this internal table.
3. eg. Just copy paste in new program.
4.
report abc.
tables : t001.
select-options : bukrs for t001-bukrs.
initialization.
bukrs-sign = 'I'.
bukrs-option = 'EQ'.
bukrs-low = '1000'.
append bukrs.
regards,
amit m.

Select option in time using oracle

i attach an excel file in oracle, i have a time field in my table, i give the select option in time ie, i select the time 4:00:00 - 6:00:00 in that time period data will display,
for example html format ie, output format.

Hi
No!
U need to find a way to convert a range of select-option to a range for Native SQL, probably it should be better doesn't use a select-option for the date but two parameters: one for date from and one for date to.
Max

SELECT-OPTIONS can u use it to read internal table ?????

Hello All,
 I am trying to read an internal table with the select-options statement. I am getting a syntax error so i am hoping i am just coding it incorrectly. Can someone tell me what is wrong here is the if statement :
if p_begdte in t_rpt-datab and
 p_enddte in t_rpt-datbi.
 else.
 exit.
 endif.
thanks scott

This is not working?
tables: a916.
* Beg valid date *
data text021(29).
selection-screen begin of line.
selection-screen comment 1(30) text-021 for field p_begdte.
selection-screen position 32.
select-options: p_begdte for a916-datab default '20041101' to
'99991231'.
selection-screen end of line.
* End valid date *
data text022(29).
selection-screen begin of line.
selection-screen comment 1(30) text-022 for field p_enddte.
selection-screen position 32.
select-options: p_enddte for a916-datbi default '20041101' to
'99991231'.
selection-screen end of line.
start-of-selection.
Loop at t_rpt.
if t_rpt-datab in p_begdte
and t_rpt-datbi in p_endte.
* do something
else.
exit.
endif
Endloop.
Regards,
Rich Heilman

Populate SELECT-OPTIONS default value using CALL FUNCTION

Hi Experts,
I would like to populate SELECT-OPTIONS s_currm default with value in w_currm, however, it doesn't seem to work. Can you please advise what the correct syntax is.
Note that CALL FUNCTION 'GET_CURRENT_YEAR' is working correctly and populating w_currm (as I can use it in a SQL SELECT statement), however, it does not seem to work for SELECT-OPTIONS s_currm.
Thank you for your time.
Code snippet is as a follows:
REPORT Z_DOWNLOAD_BSIS_TEST.
*Data Declaration
DATA: w_currm TYPE BSIS-MONAT.
*Define current fiscal month
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    BUKRS         = 'X999'     " Company Code
    DATE          = SY-DATUM   " Date to find fiscal year for
IMPORTING
    CURRM         = w_currm.   " Current Fiscal Month
SELECT-OPTIONS s_currm FOR w_currm
               DEFAULT w_currm. " The default value is NOT being populated (appears blank)

Hi Venkat.O,
Thank you for your clear response. I have implemented your suggestion and it works, however, I now have a new problem.
Each time the report is executed or the "multiple selection" button is clicked the selection fields are populated once again with the default (low) values.
For example, when report is first opened the s_curry field displays '2010'. Clicking "multiple selection" results in another '2010' being populated. After executing the report the selection screen is populated again with '2010' (so we now have '2010' listed 3 times in the s_curry field).
How do I prevent the default values from repeating?
REPORT Z_DOWNLOAD_BSIS_TEST
*Data Declaration
DATA: w_currm TYPE BSIS-MONAT,
       w_curry TYPE BSIS-GJAHR,
       w_prevm TYPE BSIS-MONAT,
       w_prevy TYPE BSIS-GJAHR.
SELECTION-SCREEN BEGIN OF BLOCK b11 WITH FRAME TITLE text-001 .
*Parameters to enter the path
PARAMETERS: FILENAME(128) OBLIGATORY DEFAULT '/usr/sap/tmp/TEST.txt'
                         LOWER CASE.
SELECT-OPTIONS: s_curry FOR w_curry,
                s_currm FOR w_currm.
SELECTION-SCREEN END OF BLOCK b11.
AT SELECTION-SCREEN OUTPUT.
*Define current/previous financial periods
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    BUKRS         = 'X999'     " Company Code
    DATE          = SY-DATUM   " Date to find fiscal year for
IMPORTING
    CURRM         = w_currm    " Current Fiscal Month
    CURRY         = w_curry    " Current Fiscal Year
    PREVM         = w_prevm    " Previous Fiscal Month
    PREVY         = w_prevy.   " Previous Fiscal Year
    s_curry-low = w_curry.
    s_curry-option = 'EQ'.
    s_curry-sign = 'I'.
    APPEND s_curry.
    CLEAR s_curry.
    s_currm-low = w_currm.
    s_currm-option = 'EQ'.
    s_currm-sign = 'I'.
    APPEND s_currm.
    CLEAR s_currm.

Adding additional field 1 to selection screen of CATSSHOW (CADO)

Hello all,
We recently added one of the additional field's to show up on the data entry section when using
transaction CAT2...This is working fine and the data is entered into CATSDB.
When using CADO, one can display the addtional field 1 and sort by this field.
However, the users now want this additional field1 to be one of the selections when they
use report CATSSHOW (CADO).
Is there some type of way to configure SAP to have one of these additional fields show up
as a selection field on program CATSSHOW (CADO)? My searches in this forum and the web
have not shown me a solution yet.
Or do I have to create a 'Z' version of CATSSHOW like ZCATSSHOW and do this myself?
Thank-you,
Rick Crawford

Enhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better .

Adding a field to free selection option in F110 using BTE 00001820

Similar Messages

Maybe you are looking for