Adding a get URL command

I apologize in advance for being completely green to flash.
I've created an html website in dreamweaver. The opening page
has an intro flash movie (an .mov which I compressed in flash
encoder). When the movie ends I want it to automatically go to the
next page. There has to be a simple way to do this, right? I'm a
total newbie so stating anything obvious is really appreciated.
Thanks in advance.

Hello rudyt35,
> I apologize in advance for being completely green to
flash.
>
> I've created an html website in dreamweaver. The opening
page has an
> intro flash movie (an .mov which I compressed in flash
encoder). When
> the movie ends I want it to automatically go to the next
page. There
> has to be a simple way to do this, right? I'm a total
newbie so
> stating anything obvious is really appreciated.
>
> Thanks in advance.
maxi easy way, i guess, will be stretching your movie in
keyframes when importing
it inot flash. So, the last keyframe with your movie can be
visually seen
on a timeline and you can easily type in this very frame (or
the very next
frame) your getURL command.

Similar Messages

Get Url Command probs

I'm having a strange problem with Flash, I have a Flash
banner which I need to attach the 'GetUrl' command to. That bit is
simple - the code is:
on (press) {
getURL("
http://www.bluesq.com/bet?AFF_ID=21454",
"_blank");
None of the expression boxes are ticked, I've tried them
clicked, unclicked - but still getting the same result.

url?
Hard to fix without seeing the problem.

Get URL + load Movie

I am going from one Flash site to another and use the get URL
code just fine getURL("
http://www.site2.com).
When I get to site2 how does one pass loadMovie or other
commands to site2 flash from site 1 with the get URL command? Is
that a case for shared Objects?
Thanks

It looks like you are loading in an external .swf for the
thumbnails and the larger images for each section. If you want to
update a particular section's photos, then you can just replace the
old .swf with a new one with the same name. Your movie will then
use the new .swf when it is called to be loaded.
You should not use getURL() for any of this. GetURL() is used
to load a new .html document into a browser.

ACE 4710 http probe get url question

I am trying to create a http probe using the request method get url command. My url contains a question mark and the ACE will not accept the url as is and it strips out the question mark character. Is there a way to make the ace accept a url containg a question mark?
probe http HTTP_PROBE
port 9040
interval 10
faildetect 5
passdetect interval 60
expect status 200 200
open 1
The url I am trying to enter is /psp/epprod/?cmd=login
When I enter it the ACE does as shown below
(config-probe-http)# request method get url /psp/epprod/?
<LINE>
ACE-APP-02/vc_peoplesoft(config-probe-http)# request method get url /psp/epprod/cmd=login
It strips out the ? character.

Hi Nicholas,
To enter a question mark you need to type ctrl+v prior to entering the ?
You enter the control key then lowercase v, then your question mark.
HTH
Pablo

Flash get Url not recognised by firefox

I am building a Flash Navbar in Flash MX with the "get URL" command. It works in Internet Explorer but not in Firefox. Has anyone encountered this before and, if so, is there a solution?

A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25
You need to post a link to the website or post relevant parts of the code.

Cannot open iPhoto. I get this command, " you can't open your current photo library using this version of iPhoto.

I tried downloading iPhoto library manager as suggested by a pervious post, but even with Safari and Firefox it will not download. The dmg image disappears before I can click on it and I get a command that says "it does not work with this architecture". I'm using a G-5 Power PC Mac running OS 10.5.8. Any other suggestions? Thanks!

Likely that is for IntelMacs only.
If the iPhoto Library was ever "touched" by a later version of iPhoto, then you get the can't open message.
Create a new photo library
                           Quit iPhoto.
                           Hold down the Option key as you open iPhoto.
                           In the window that appears, click Create New.
                           Type a name and choose a location to store the new photo library.
                           Click Save.                           The iPhoto Source list shows your new, empty photo library. Any photos you import are added to this library.                                                      You can switch to another library you’ve created at any time.
http://support.apple.com/kb/PH15263

Help with calling a Get URL

I am having a problem with calling a series of web pages
within my movie. I have an index.fla that I publish to html. Within
the index.html, I am calling multiple swf files to load content.
Home.swf loads when the index page displays. Then the user clicks
on any button and each button loads another swf replacing the main
content with perhaps loading it's own swf files of content also.
Everything is working fine. However, on one called swf file, called
students.swf, I also have a menu swf file that is called when
students loads. This menu swf file has text listed with
actionscripting calling a data file that causes the text to expand
and rollout and display a label of the url. When the user clicks on
the list name I have a get url to the url of the label. Everything
works fine in the swf files when I test the movies for the swf for
the menu file and for the student file swf. However, when I publish
and run the index page and start testing out the student swf that
is called, the menu will not open up a new browser window with the
link designated in the get url. I can't figure it out! It works
fine in the swf files, but not when I test it out through the index
controlling file. Please Help!!!

if you're using as2, try adding
this._lockroot=true;
to the movieclip that contains getURL, the student file
swf.

Question about WEBAPI URL commands

Hi,
In Visual Composer I'm making a drilldown from table 1 (output from BW query 1) to table 2 (output BW query 2, but same filters as query 1). In my first table I have many keyfigures, in my 2nd table I just want to display that keyfigure with more detail based on the selection from query 1.
Since I can't filter on keyfigure level in VC itself I need one WEBAPI (url command) to do one additional filtering since I don't want to show all keyfigures in query 2 / table 2. I have been testing this first with supplying the WEBAPI string with the fixed (hardcoded) values and this works fine. It looks as follows :
'FILTER_IOBJNM=44RHE9MINFGXEBEXOI7S7UKE6;FILTER_VALUE=44VSUXQJNO2MG4CLOAF5M503I
The first string is the name of my keyfigure structure in my query, the 2nd string is the technical name of the keyfigure on which I want to restrict. Like it said, supplying the command url values hardcoded words so I thought i was finished...
Now I wanted to pass the right selected value from table 1 via the VC in the FILTER_VALUE field.
It looks as follows now :
'FILTER_IOBJNM=44RHE9MINFGXEBEXOI7S7UKE6;FILTER_VALUE=@KF_key'
But this doesn't seem to work although @KF_key contains the right value. KF_KEY should give the right technical keyfigure name.
Am I using the right syntax in the FILTER_VALUE part ? I have seen some topics on this forum where people also use the & symbol in some parts but I don't get it up and running
thanks
Message was edited by:
Double U

Suddenly it works.
The correct syntax :
'FILTER_IOBJNM=44RHE9MINFGXEBEXOI7S7UKE6;FILTER_VALUE='&@KF_key&''

How to get the command button component id in bean class?

Hi All,
I'm using adf 11g.
I'm having three command button , which have some similar code to use on fire of these buttons.
if it possible to catch the component id in bean , i can use the code with little parameter passing .

Hi,
You can get the command button from the actionEvent (if you are writing a generic actionListener) and from it, you can get the Text of the command button. Using which, you can process accordingly.
If the text also same, then set some client attribute for the command button (check out [url http://docs.oracle.com/cd/E21764_01/apirefs.1111/e12419/tagdoc/af_clientAttribute.html]af:clientAttribute), and from the actionListener, get the client attribute using getClientAttribute method and process accordingly.
-Arun

How to get ALL command line parameters

Hi,
Is there possibility to get all command line parameters which
Flex builder invokes when I press RUN button ?
I am asking because I want to create mxmlc ant task with the
same parameters as Flex builder.
I wrote something like that below but I have a problem with
invoking remote function, it seems that poduced SWF inf flex
builder an my script (below) arent the same - and mayby have some
security differences.
Any Ideas how to get all compiler argumets from flex builder
quote:
<mxmlc
file="${flex.src}\main.mxml"
output="${flex.output}\main.swf"
services="${path.tomcat.root.WEB}/flex/services-config.xml"
context-root="${path.tomcat.root}"
use-network="true"
keep-generated-actionscript="false"
debug="false"
locale="en_US"
incremental="true"
>

<load-config
filename="${FLEX_HOME}\frameworks\flex-config.xml"/>
<source-path path-element="${FLEX_HOME}\frameworks"/>
<compiler.source-path path-element="${flex.src}"/>
<compiler.library-path dir="${FLEX_HOME}\frameworks"
append="true">
<include name="libs" />
<include name="../bundles/{locale}" />
</compiler.library-path>
</mxmlc>

Hi,
Try -dump-config compiler argument, which will write all the
currently set configuration values. Please find more details at the
URL below.
http://www.quilix.com/node/9
Hope this helps.

URL command

I'm experienced in SSIS and some simple scripting using the Script Task. But completely new to URL commands. I have the need to download some data via a web service using a URL command. I can type this command into a web browser and it does something.
Does SSIS allow me to run a URL command somehow?... thinking Script Task. I'm so new to URL commands that I'm not even sure how to ask the question. All I know is that I have a certain URL command that I can type into a browser and I want to do the same using
SSIS. I hope my question makes sense.

You can use Webservice Task in SSIS for this
see
http://www.bidn.com/blogs/BillBrannen/bidn-blog/619/ssis-web-service-task-step-by-step
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Looks like something I should dig into. Not being familiar with what a web service is... not sure how to ask my question. I believe the particular URL I am typing into the browser is a web service. It gets some data in a csv format and I get a prompt in
the browser that asks me to open or save this csv file. That is what I want to automate using SSIS by configuring the file save location. But before I do the output file configuration, I want to see if SSIS likes the URL I typed in. Should I be able
to type in this same URL and hit Test Connection and expect it to come back OK?... because right now when I hit Test Connection, I get this error (I've also provided the login and the password required by this web service URL.)
TITLE: Microsoft Visual Studio
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
BUTTONS:
OK
Am I limited to typing in a URL that ends in .asmx?WSDL.... because the URL that I'm trying to type in goes something like h t t p s://whatever.com/blahblah/moreblah?<param1>=val1.... I'm getting the sense that this isn't the kind of URL that this
task likes.
Should I be able to work with a URL like this in SSIS?

Can not get URL using GetPageContext().getRequest().getRequestURI()

Hi guys,
I am coding a web application using ColdFusion 8.
The situation is as follow:
- I type https://mypage.com/aaa/bbb.html on web browser where aaa and bbb.html does not exist in my web folder.
- And this will drive the error 404 PageNotFound occurred, in the code that processing error 404, I tried to get URL aaa/bbb.html by using GetPageContext().getRequest().getRequestURI() but the result of this command is my created 404 error page.
- I also tried to get URL by using CGI, but also couldn't get it.
Can you guys show me the way to get URL when no page is found error occurred?
Thank you very much in advanced!

No screen wrote:
- I type https://mypage.com/aaa/bbb.html on web browser where aaa and bbb.html does not exist in my web folder.
- And this will drive the error 404 PageNotFound occurred, in the code that processing error 404, I tried to get URL aaa/bbb.html by using GetPageContext().getRequest().getRequestURI() but the result of this command is my created 404 error page.
ColdFusion will know nothing of https://mypage.com/aaa/bbb.html! As the requested page is HTML, the web server will respond to it, without involving ColdFusion. The ColdFusion function GetPageContext() is therefore irrelevant.

Trying to get " url " to work in my scroller/ gallery...

trying to get " url " to work in my scroller/ gallery...
please take a look at my action script and xml... ive got all
the fields working except for the " url " ... what adjustments do i
need to make to get the url for each pix to work...
thanks...trey
delay = 3000;
function loadXML(loaded) {
if (loaded) {
xmlNode = this.firstChild;
image = [];
title = [];
headline = [];
description = [];
total = xmlNode.childNodes.length;
for (i=0; i<total; i++) {
image
= xmlNode.childNodes.childNodes[0].firstChild.nodeValue;
title
= xmlNode.childNodes.childNodes[1].firstChild.nodeValue;
headline
= xmlNode.childNodes.childNodes[2].firstChild.nodeValue;
description
= xmlNode.childNodes.childNodes[3].firstChild.nodeValue;
firstImage();
} else {
content = "file not loaded!";
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("images.xml");
p = 0;
this.onEnterFrame = function() {
filesize = picture.getBytesTotal();
loaded = picture.getBytesLoaded();
preloader._visible = true;
if (loaded != filesize) {
preloader.preload_bar._xscale = 100*loaded/filesize;
} else {
preloader._visible = false;
if (picture._alpha<100) {
picture._alpha += 10;
function nextImage() {
if (p<(total-1)) {
p++;
if (loaded == filesize) {
picture._alpha = 0;
picture.loadMovie(image[p], 1);
title_txt.text = title[p];
headline_txt.text = headline[p];
description_txt.text = description[p];
picture_num();
slideshow();
function prevImage() {
if (p>0) {
p--;
picture._alpha = 0;
picture.loadMovie(image[p], 1);
title_txt.text = title[p];
headline_txt.text = headline[p];
description_txt.text = description[p];
picture_num();
function firstImage() {
if (loaded == filesize) {
picture._alpha = 0;
picture.loadMovie(image[0], 1);
title_txt.text = title[p];
headline_txt.text = headline[p];
description_txt.text = description[p];
picture_num();
slideshow();
function picture_num() {
current_pos = p+1;
pos_txt.text = current_pos+" / "+total;
function slideshow() {
myInterval = setInterval(pause_slideshow, delay);
function pause_slideshow() {
clearInterval(myInterval);
if (p == (total-1)) {
p = 0;
firstImage();
} else {
nextImage();
and here is my xml...
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<images>
<pic>
<image>sample1.jpg</image>
<title>Google</title>
<headline>headline 1</headline>
<description>this is the description of article
1.</description>
<link>
http://www.google.com</link>
<targetIsUrl>Y</targetIsUrl>
</pic>
<pic>
<image>sample2.jpg</image>
<caption>Yahoo</caption>
<headline>headline 2</headline>
<description>this is the description of article
2.</description>
<link>
http://www.yahoo.com</link>
<targetIsUrl>Y</targetIsUrl>
</pic>
<pic>
<image>sample3.jpg</image>
<caption>BAS-llc</caption>
<headline>headline 3</headline>
<description>this is the description of article
3.</description>
<link>
http://www.bas-llc.com</link>
<targetIsUrl>Y</targetIsUrl>
</pic>
<pic>
<image>sample4.jpg</image>
<caption>USC Trojans</caption>
<headline>headline 4</headline>
<description>this is the description of article
4.</description>
<link>
http://www.uscripsit.com</link>
<targetIsUrl>Y</targetIsUrl>
</pic>
</images>

Extensions that do not have a "Remove" button are installed by other software and are not under control of the Firefox extension manager.
Such globally installed extensions are usually found via a registry scan or are installed in a location that Firefox scans for installed extensions.
*https://developer.mozilla.org/Installing_extensions
*https://developer.mozilla.org/Adding_Extensions_using_the_Windows_Registry
Extensions installed this way need to be removed via the settings (options/preferences) of the program that has added this extension or this program has to be uninstalled via "Control Panel > Programs".
In Firefox you an only disable such an extension.
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

'Get URL' Behavior not working in IE?

Hi, I've never had issues with adding a simple link to a
button. However, with IE7 my Get URL behavior won't seem to work in
IE. I'm including the new AC_Active_Content.js now that spits out
with the published files and it still doesn't seem to work.
Please confirm what code I should be using for a button link
and where it should go (action or behavior?)
Anybody know what's up?
Thanks

Thanks. I was actually wondering the differences between AS2
and 3. I guess that's one of them.
Anyway, that worked. I just used AS2 and put this into the
Action window:
on (release) {
getURL("
http://www.url.com");
Thanks a lot for the help.

What are REQUEST_NO and PAGENO parameters in WebAD url commands?

Hi,
I cannot find any documentation on what are REQUEST_NO and PAGENO parameters in WebAD url commands and how to use them.
Like in this case:
http://..../sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=0&CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT&...
Will appreciate any hints!
Vitalik

This is a pretty normal thing to have to do, even on a form you can't guarantee all the values will be returned (unchecked checkboxes for instance won't ever send a value).
In my code I am checking to see if these params are in
the url or not:
arg1 = request.getParameter("arg1");
if(arg1 == null)
do something1;
arg2 = request.getParameter("arg2");
if(arg2 == null)
do something2;
Just change your logic a little:
// If the param is passed, get the value ...
if (request.getParameter("arg1") != null)
arg1 = request.getParameter("arg1");
else // No parameter "arg1" passed ...
// do something

Adding a get URL command

Similar Messages

Maybe you are looking for