Adding a gutter AFTER document is completed

Just finished laying out a 90 page book. Not sure how 'gutters' work. I find the 'Defining Columns' section in the Help a bit confusing.
Could somebody perhaps explain in simpler terms how I install a universal 'gutter' to my entire document (with facing pages)?
All ears...
Ben

As I wrote many times, don't use the Help, use the Pages User Guide which you may download from the Help menu.
Yvan KOENIG (VALLAURIS, France) lundi 19 avril 2010 10:44:16

Similar Messages

  • 925685 - Approval process is not triggered after documents are added

    Hi there,
    I was wondering if anyone found already a solution for the following problem.
    According to SAP Note: 925685 - Approval process is not triggered after documents are added.
    Within our SAP application, we want to approve purchase orders for departments based upon the document total.
    I was very astonished that employees are able to add a PO which will not trigger an approval stage and after the document is added, they have the possibility to change the document and at the update moment no approval will be started even if the document meets the approval requirements.
    Therefore I really want the flexibility to give users the possibility to change their PO.
    Meanwhile, documents which are added under approval, are also locked for changes, although this is another question it is also pretty annoying!
    I hope anyone has already found a method or work around for the stated problems above.
    (We are using SAP 8.8 PL 20)
    Thanks in advance.
    Kind regards,
    Marcel

    Hi Kambadasan,
    Thank you for your reply
    I'm sorry but I know how the approval templates work and they are configured correctly, however as SAP also mentioned in their own Note, this is due to the lack of SBO that SAP has such behaviour.
    Hi Gordon,
    Thanks for your reply.
    Unfortunately I have not found the post you mentioned...
    I will post my issue alson on the topic you mentioned.
    Hopefully they found a solution or maybe version 8.81 will solve the problem.
    Thanks a lot!!
    Kind regards,
    Marcel

  • Veeam back to tape after Backup Exec completes

    Yes, it's possible to use 2 mentioned solutions together. Hope, you're using Veeam latest version as it has enhanced support for tape devices. If not, have a look: http://www.veeam.com/kb1816
    Tapes don't have to be directly connected to Veeam Backup Server. Any Windows server with tapes can be added to Veeam environment as Tape Server, please refer to user guide for details.

    Is it possible to run a Veeam job to backup to Tape after Backup Exec completes at night and append the Full Vm to the end of the tape ? Using BE 2014 currently.
    Also does the Tape device need to be directly connected to the Veeam Server?
    Thanks in advance
    This topic first appeared in the Spiceworks Community

  • "Modified By" Field Value is same "Created By" field value after the workflow completion.Sp 2010 workflows

    Hi All,
    I have a work flow A attached to List List1
    I have Added an item(now created by and modified by are same)
    Next Person B modified
    Ideally created by value and modified by value should be different, but they are same after the workflow completion
    This is very strange as i am not modifying  modified by field any where
           Please let me know any one has faced similar problem
    Thanks
    Ravi
    Ravi

    The workflow will run as the person who initiated it. As such if the workflow starts when an item is created then it'll be running as the user who created the item.
    When the workflow changes anything the 'modified by' field will be updated to show the identity the workflow is running under. I think that explains your behaviour?
    To change it you could use an impersonation step but that would simply replace one name with another. I don't think you've got access to the 'SystemUpdate()' method in workflows which would allow you to avoid updating the modfiied by and modified date fields.

  • After studying ACR completely ...

    After studying ACR completely, there are some points I could not solve the mystery about them  ... so need your helps.
    My platform is Windows 7 64-bit ...
    1. "Apply auto tone adjustments" option in the preference dialog is not same with the "auto" option on the basic tab. When I check "Apply auto tone adjustments" option, "auto" button on the basic tab is always active and I always get slightly different results when I click it.
    2. There is "ignore sidecar .xmp files" in the DNG file handling section on the preferences dialog. From the Photoshop forum, I learnt that it may be used with the read-only DNG files for writing xmp metadata to the sidecar .xmp file if this option is unchecked. But, this usage is not so relevant what the name of option says ... and there are some different explanations in the Photoshop CS6 Reference. Is there any other usage for this option ... like the information mentioned in the official reference document?
    3. In the settings panel, there is an option called "clear imported settings". What is the function of it? Indeed, I have never seen it as active.
    4. And lastly, as I mentioned in another topic, it seems to me that the saturation sliders on the camera calibration tab need more testing ... in Lightroom, I even get more unnatural results.

    #1: As far as I know, Apply Auto from prefs does an auto adjustment as the image is is rendered when making the initial "default" rendering for Bridge. Once the full raw image is loaded, if the full raw data results in a slightly different Auto analysis, the Auto button will be enabled and the Auto is run on the full raw data and you'll get a similar but different result. I've seen images that come in with the Auto prefs enabled where the Auto button is dimmed meaning the initial and full res analysis is the same.
    #2: If a native raw and a DNG of that raw file are in the same folder, ACR will use the .xmp sidecar file as the image settings–even if there are xmp settings in the DNG. Setting the prefs to ignore side car files means there will be no conflict.
    #3: primarily used when some other application has made image settings to the raw image. Principally useful for clearing settings from raw files touched by ACR hosted in Elements (as far as I know) because Elements ACR only has a small subset of all potential ACR settings.
    #4: The Camera Calibration settings are designed for adjusting the sensor calibration for sensors whose color rendering differs from the sample tested by Adobe. The calibration sliders are actually depreciated now because they predate DNG profiles. Thomas was ready to rip them out (back when DNG profiles went in-ACR 4.6/5.0) but was persuaded to keep them for creative purposes by Martin Evening (and me) because they could be used for color FX like cross-processing. There is very little likelihood there will be any changes forthcoming because, well, DNG profiles offer superior color calibration rather than manual slider adjustment. So, I suspect you'll just have to learn to live with what is there now-unless you have some evidence that DNG profiles don't provide a superior calibration.

  • Junk after document element

    "Junk after document element"—what does that error message mean.
    InCopy (.icml-file) size is 4 MB. We do some minimal text-corrections in InCopy and after check-in the .icml-file-size is 8 MB and the file is defect.
    No help from Adobe support available ! ?
    Thanks Andy

    add, where you want apex to stop generating code,
    apex_application.g_unrecoverable_error := true;example:
    htp.init;
    wwv_flow.g_page_text_generated := true;
    INV_INVOICES_BLOB_DISPLAY(p_image=>:REQUEST);
    apex_application.g_unrecoverable_error := true;had most problems when displaying pure XML, apex added junk in the end of file.

  • Sample  still showing in quality inspection stock after usage decision completed

    After process order completed, we have received 100 units as a quality inspection stock.  After usage decision,( QA11), I have posted 98 units to unrestricted use and 2 units to the  to sample usage
    98 units successfully move to unrestricted stock.
    However 2 units for sample still showing quality inspection stock.
    I have checked MB51, mat document number for sample is 4900000160 and movement type is 331
    Do you have any idea why sample still showing in quality inspection stock. It  should consumed and zero out the quality inspection stock in MMBE

    Hi,
    Please check you MIC's control Indicators.
    Is it tick on Destructive insp. under Sample tab ?
    Please tick it and try again with whole process.
    Destructive Insp. : You specify whether the sample is to be destroyed after inspection. This means that is no longer available. This quantity is used in the usage decision as the proposed quantity for the posting to sample.

  • HT201263 I see the "Connect to iTunes" screen and the device appears in iTunes. Everytime I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete

    I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.

    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • Error Code "-5002" While adding a Goods Issue Document

    Hi,
    While adding a goods issue document for only a specific combination of items I get "Internal Error (-5002) occured" message.
    The scenario is i am adding 5 rows with following specification
    Row1- Serial Managed Item
    Row2- Batch Managed Item
    Row3- Managed by none
    Row4- Batch Managed Item
    Row5- Serial Managed Item

    Hi I had the same Issue,
    What my problem solved was setting the baseline number for each serial and batch number on each specific line to the line number of that specific line.
    like this:
    doc.Lines.SerialNumbers.SetCurrentLine(doc.Lines.SerialNumbers.Count - 1);
    doc.Lines.SerialNumbers.InternalSerialNumber = 2;
    doc.Lines.SerialNumbers.BaseLineNumber = doc.Lines.SerialNumbers.Count - 1;
    Regards

  • I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfull restarted my sy

    I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfully restarted my system using the SSD as the boot device.  I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins.  I successfully tested the key features that I frequently use.  Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found.  All drives are available on the system via the Finder and Disk Utility.  I can access all drives including the old MAC HD which is no longer the boot device.  I've even attempted to launch Photoshop from the old device yet the same error persist.  Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch?  I've even restarted my system several times to see if that would resolve the issues.  Does anyone have any recommendations for this issue?  Have you previously address this issue? 
    Thank you Gregg Williams

    Boilerplate text:
    Reset Preferences
    http://forums.adobe.com/thread/375776
    1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
    or
    2) Move the Folder. See:
    http://www.bugge.com/Family-and-friends/Illy/illy.html
    --OB

  • I added content to a document in Pages on my Mac last night, which was saved to icloud and this morning it was gone. Can I get my precious work back? Thanks

    Hello
    I added content to a document in Pages on my Mac last night, which was saved to icloud and this morning the additions were gone. Can I get my precious work back? Thanks

    Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
    I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
    The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
    I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

  • I am trying to update to iOS5, but after the download completes, I get an error message "There was a problem downloading the software for my iPad2. The network connection timed out." Any suggestions?

    I am trying to update to iOS5 on my iPad 2, but after the download completes, and file processing starts, I get an error message "There was a problem downloading the software ... the network connection timed out."  Diagnostic tests check out OK.  Any suggestions?

    Temporarily disable your firewall and security software and see if that helps.

  • How to get the only the changed or newly added entries in AFTER SAVE.

    I have created table maintenance generated for a table,I want to get the newly added or changed entries while saving thats why im using AFTER SAVE event for the same,can anyone please tell me how to get the only the changed or newly added entries in AFTER SAVE.

    Hi,
    Welcome you post on the forum.
    I have moved your thread here because it is in English and should not in the language specific forum. What is your system version?
    Thanks,
    Gordon

  • Adding More than one document to a cell in a dataform

    Hi All,
    I am using EPM 11.1.1.1.0 .
    I have a planing application and I need to add three documents to a cell in a data form.
    Is there a way i can do this...
    I can add one document and can open it as well but did not find a way of adding more than one document. Is it supported on Hyperion Planning ?
    Also if we have a document attached to a cell text ...Is there a way to print it out from Hyperion Planning or Workspace?
    Regards.
    Alicia
    Edited by: Alicia on Aug 6, 2009 6:39 AM

    Hi,
    I believe it will be just one document, I say that because when you go to the cell and choose open document then it is aimed at opening just one document.
    As for printing from cell text, you would have to open the document first before being able to print.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Webclient does not open previous added versions of bqy documents

    We are running IR/ workspace 9.3.1.3.0401 on weblogic.We have an odd behaviour in opening previous added versions of bqy documents.
    case:
    import a bqy document.
    add another version of this document (make it obvious and simple only a dasboard with a "1" and "2" in a text label should be enough. for this test)
    open the bqy as/ with IR webclient. (make sure this action opens the last added version.
    till so far no problems
    the open the previous version (File> Open > Document> (open as interactive reporting web client/ Version (choos the first or previous version) )
    It does NOT open the previouws version but the last posted version.
    strange is it?
    I opened a case at Oracle for this.
    (trying the same document with ihtml does not give a problem., it shows whichever version you ask for)

    Oracle confirmed this is a bug.

Maybe you are looking for