Adding a heading to the steps element in a DITA topic
Hello Framers,
I've been using unstructured FM for years, but I've only just started looking into structured FM. I am currently trying to adjust the sample DITA application that comes with FM 9 to our requirements. In the DITA task topic, the sample application adds frames from a reference page above and below the steps element. Both frames contain a line to visually separate the steps element from other elements in the topic. The upper frame also contains a heading for that element.
I don't like this approach at all. First of all, I don't want translatable text on the reference page. In addition, the heading should go to the side-head area. The EDD contains the following rules for the steps element:
Automatic insertions
Automatically insert child: step
and nested child: cmd
Format rules for first paragraph in element
In all contexts.
Use paragraph format: step.begin
Format rules for last paragraph in element
In all contexts.
Basic properties
Paragraph spacing
Change space below by: +6pt
Pagination properties
Keep with previous: Yes
Advanced properties
Frame below element: StepsEnd
I was thinking about adding a prefix to the steps element, but in this case, the prefix is formatted as the first step with the step.begin paragraph style. Is it possible to define a formatting rule for the second paragraph in an element?
Thank you for any help
Susanne
Maybe it is time to rethink what you need to do.
Just because FrameMaker ships DITA with styles that put a frame above and below the steps element, does not mean that you have to do it also. You can delete it from the EDD.
If you need your steps to have a heading, then use the heading (or title) element in one of the containing elements higher up the hierarchy, such as the taskbody. I do not use DITA but my structure has a procedure element that is something like:
Procedure
Title
Intro
Step
Step
The Title element contains the title or heading or the procedure. The Intro element contains introductory material for the procedure. Typically, the title is in the side head, which aligns with the first paragraph in the Intro. If there is no Intro element, then the title aligns with first Step element. This structure is simpler than the standard DITA structure, but my point is that the title of your procedure (or steps) need not be part of the steps element itself; my guess is that the DITA structure has a place for it higher up the hierarchy.
Similar Messages
-
Adding over heads to the process order
Dear All,
We are executing one projrect for which production of goods will be started from 01.01.2012.so for this we need to caculate cost of the product before the production order executed.
For RM one BOM will be created & issued to the production order so that the cost of RM can be identified with the production order.
For Over heads we need to provide the facility to enter manually for each order based on qty. & rate in the production order.
So that before the production order executed the total cost of the order can be arrived.
Now pl. advice how to provide the facility to enter manually for each order based on qty. & rate in the production order
Thanks
ShivajiHI shivaji mohanty,
I have seent the same process in the Production Order. I hope it will work to process order also. Pl check the path
Contorllling --> Productin Cost Controlling --> Basic Settig for Material Costing --> OH Key & OH Group.
Pl do the necessary setting & assign the Process Order!
I hope it will work. pl check & revert back!
Regards
Raj -
The Step Result element in the DITA tasks
While creating a task in DITA, the Steps element contains Step > Step Result element. If I insert the Step Result element, the text "Step Result:" is also displayed in my published output. I would like to use the Step Result tag, but I do not want to see the Step Result text being displayed in my output. I have gone through the style guides, edds, dtds, but don't know where the text is coming from. Please help.
Hi ScottPrentice,
Thanks very much for the response. I followed your instructions, but no luck so far. Here's what I did:
1. Opened my task document > View > Reference pages. I could not locate Step Result referenced frame there.
2. Locate the template for this structured application - The template is Task.template. The template file is blank, so I opened the corresponding edd file: Task.edd
3. The First Format Rules and Text format Rules for the Step Result element are as follows:
First Paragraph Rules:
If Context is Step, use Step.result.begin
else use substep.result.begin
Text Format Rules:
If Context is Step, use paragraph format Step.result.begin
4. The Step.paragraph.begin paragraph style is being used here. You asked me to change the referenced file to none, but I did not find such syntax where I can make it none.
The easiest way to determine the right tag to edit is by checking the paragraph definition in the task topic you're editing.
The paragraph definition is step.result.begin. Could you please help me edit and remove the step result text from it? -
Hi All,
Does anybody have any idea about how to get the selection parameters entered through variables by the user in the header of the report.
Though the values of the selection parameters get displayed in the o/p display of BEx Analyser by default, but is there any way of adding a header to the report and display these selection parameters in the header as a label.
That means the basic requirment is dynamically changing header of the report.
Regards,
VaradaHi Varada,
First of all, make sure that your elements are displayed: Layout -> Display text elements -> All.
Then choose an Excel menu option Tools -> Macro -> VB editor. Put inside the SAPBEXonRefresh sub definition the following code.
Dim txt1row As Integer
Dim ws As Worksheet
txt1row = 15
Set ws = resultArea.Parent
ws.Cells(1, 1) = ws.Cells(1, 1) & " - " & ws.Cells(txt1row, 2)
txt1row is a number of row where your text element is sitting. You can add some additional text if you want to. In this example to the existing report header the text element from the 15th row (through ) will be added.
Best regards,
Eugene -
Adding new fields to assignment block, what are the steps to do this.
CRM 7.
Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
My understanding is that I need to use transaction EEWB and then somehow use the component "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost. I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
I wondered if anyone has a link to any guide docuemnt about how to do this?.
Any help would be very much appreciated.
I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
JasonHi Jason,
You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
Best Regards,
Gobinda -
I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?
ARD only works with Windows computers if the Windows computer is running VNC server software. Even then it can only control and observe. Do you have this installed?
-
I purchased Photoshop and Premiere Elements 10 as a package in 2012. I now want to update the Premiere to the 13 edition, without updating Photoshop. Can I do this? Will you please tell me the steps I need to take?
Just buy version Premiere Elements 13.
Even if you don't get the "upgrade" price, you can probably find it for about that cost on sites like Amazon.com.
You can keep Photo Elements 13 if you'd like. The only downside is that Premiere Elements 13 and Photo Elements 10 won't share the same Organizer catalog. Otherwise, they'll get along just fine. -
EEWB and adding additional fields to the IBASE header
Hello,
I have used the EEWB (Easy Enhancement WorkBench) to add additional fields to the IBASE header. The process ends with a success state and in all steps there are no logs. The objects are generated and visible in the database table of the IBASE header and activated.
When I go to the IB53 transaction the systems starts compiling. After the compiling there are no additional fields visible?
In the EEWB no more actions are possible and it seems only an append structure was created with the new fields (GENERIC_IC_TASK).
How do I get the fields to be visible in the IBASE transaction?
I am using CRM 5.0.Ramakanth/Kiran,
For creating screen structures or additional fields on the IBase header screen you would need to manually append entries in Database Tables T371D.... through T371Z, it is a set of around12-14 tables depending on the scenario which would need updations.
Once updated in the right sequence you can see the EEWB fields on the Ibase header screen.
Hope this helps.
Amit Sitlani -
I have photoshop elements 10 and when I put the 1st disc in it will not load it just launches. I have gone through the step and troubleshooting in the manual but no dices please help.
Hi,
You can download Photoshop Elements 10 from the link below and Install with the serial number,
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
Thank you -
I went through all the steps to download the trial of Adobe Photoshop Elements 13. It says download completed, but nothing happened afterwards prompting to launch the program. I checked finder (MAC OS) and couldn't find it. Only have Adobe download assistant. How do I open and run the program?
Jediii please see Photoshop Elements 13 download complete. What to do next? where this topic was just discussed.
-
Compressor adding white frames at the head of the movie converted
i used compressor to convert footage from mp4 to Apple prores 1024x576 16x9 and also change different frame rates to 25 fps
I resized all the big videos to 1024x576 and maintained the smaller videos like 640x360 in its original size as i will composite them together to maintain quality.
everything went well as compressor makes a very good job in resizing and frame rate coversion.
i noticed that compressor added at the head of the movies a white frame on most of the converted movies
and after importing the movies to fcp 6 i found that every time i use a movie with a white frame in the head Fcp crashes.
is it because of the frame rate as i noticed that the white frames are in the movies with for example 23.98 that were conformed to 25.
i cannot edit because of fcp quits.What do you have the most of? 1920, 1280, SD?
What is the final deliveable? web, broadcast, blu-ray, SD DVD?
Maintaining the aspect ratio can be done in your sequence settings whether your sequence is HD or SD.
640x360 will still only fill about 1/2 of the 1280x720 screen at 100%.
You can scale it to fill the screen but you will take a quality hit.
In most cases putting 1920 in a 1280 sequence isn't going to make the baby jesus of quality cry.
In my experience upscaling SD outside of FC in another program doesn't usually help with quality.
I do the scaling in FC and know that I will have to render. I would still use Compressor for the frame rate codec conversion but do not change the source size unless you are converting to a more friendly broadcast size.
You may want to consider that SD footage doesn't have to fill the entire screen.
You can do other treatments to the footage so that you still fill the entire screen but the actual footage isn't being scaled to fill the entire screen. Blurred footage, stills, etc for a background can help with this. -
What are the steps for adding a new field to the ST for CRM 2007?.
Yeah, I know it's a basic question. I'm fairly familiar with CRM 5.0 but 2007 is new to me and there a good few changes.
If I need to add a new field (probably with some processing to set its value) to the Service ticket what would be the steps I need to take to achieve this in CRM 2007?.
Your help would be much appreciated.
Jas.Are we talking about the EEW Business objects displayed in the EEWB as there is no business object called 'CRM OPPORTUNITY', but there is one called 'OPPORTUNITY'. Just wanted to make sure I was on the right track.
So, as I need to change the service ticket it would mean that my transaction type will be service request,or whatever the shorted value is, is that correct?.
I can see the transaction types in table CRMC_PROC_TYPE_T, although it looks like I need to pick SRVO (Service order) at a guess, and if this is right I'm looking for the EEW Business object to match. But it feels like guesswork to me. For example, I could choose EEW Business object 'SERVICE_TRANSACTION' which has an Extension type of 'CUSTOMER_H', or I could choose EEW Business object 'SERVICE_CONTRACT' or 'SERVICE_CONFIRMATION', although the last is unlikely. But, my point is there is so much open to interpreatation, and I'm expecting it to be more exact. Perhaps I'm just missing something.
Jas.
Edited by: Jason Stratham on Sep 4, 2009 2:30 PM
Edited by: Jason Stratham on Sep 4, 2009 2:39 PM -
Error whil adding Header to the ALV grid using OO
Hi Guys,
I want to display the Header for the ALV grid using Splitter .
when i am doing like that .I am getting a screen on the top of that screen I am getting a EMPTY screen .I don't know why likat.
What i need is just to display a Grid with header?Can anybody Please help me reagarding this problem.
the Code is Below.
*& Report Z_TEST_PGM
REPORT Z_TEST_PGM NO STANDARD PAGE HEADING
LINE-SIZE 120 MESSAGE-ID zotc.
Tables : CKMLMV003 , CKMLMV001.
TYPE-POOLS: slis.
Types : Begin of t_CKMLMV003_out,
WERKS type CKMLMV003-WERKS,
MATNR type CKMLMV003-MATNR,
MISCH_VERH type CKMLMV003-MISCH_VERH,
KALNR_BAL type CKMLMV003-KALNR_BAL,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
MGTYP type CKMLMV003-MGTYP,
End of t_CKMLMV003_out,
Begin of t_CKMLMV001_out,
MATNR type CKMLMV001-MATNR,
KALNR type CKMLMV001-KALNR,
LIFNR_ND type CKMLMV001-LIFNR_ND,
EKORG_ND type CKMLMV001-EKORG_ND,
End of t_CKMLMV001_out,
Begin of t_CKMLMV003_Temp,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
End of t_CKMLMV003_Temp,
Begin of t_Final_out,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
WERKS type CKMLMV003-WERKS,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out,
Begin of t_Final_out1,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out1.
Global Structures *
Data : i_CKMLMV003_str type t_CKMLMV003_out,
i_CKMLMV001_str type t_CKMLMV001_out,
i_Final_str type t_Final_out,
i_Final_str1 type t_Final_out,
i_CKMLMV003_Temp type t_CKMLMV003_Temp.
Global Internal Tables *
Data : i_CKMLMV003_out type standard table of t_CKMLMV003_out,
i_CKMLMV001_out type standard table of t_CKMLMV001_out,
i_Final_out type standard table of t_Final_out,
i_Final_out1 type standard table of t_Final_out.
ALV Report Internal tables *
DATA : t_fieldcatalog TYPE slis_t_fieldcat_alv,
s_fieldcatalog TYPE slis_fieldcat_alv,
t_basic_fieldcatalog TYPE slis_t_fieldcat_alv,
s_basic_fieldcatalog TYPE slis_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv,
v_repid TYPE sy-repid.
*ALV Header declarations
Data: t_header type slis_t_listheader,
i_header_str type slis_listheader,
i_line_event_str TYPE slis_alv_event,
i_events TYPE slis_t_event,
wa_layout type slis_layout_alv.
Data : grid1 type ref to cl_gui_alv_grid,
g_custom_container1 type ref to cl_gui_custom_container,
grid2 type ref to cl_gui_alv_grid,
g_custom_container2 type ref to cl_gui_custom_container,
i_FCAT TYPE LVC_T_FCAT,
i_FCAT_str type lvc_s_fcat,
Structure for layout
i_layout_s TYPE lvc_s_layo,
gt_final1 type table of t_Final_out.
DATA: CCCONTAINER1 TYPE SCRFNAME VALUE 'CCCONTAINER1',
CCCONTAINER2 TYPE SCRFNAME VALUE 'CCCONTAINER2',
G_PARENT_TOP TYPE REF TO CL_GUI_CONTAINER ,
G_SPLITTER TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
G_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT,
G_PARENT_GRID TYPE REF TO CL_GUI_CONTAINER.
Global Variables *
Data :cnt(4) type n value '0',
g_plant type CKMLMV003-WERKS ,
g_QuanTStr type CKMLMV003-MGTYP ,
g_PurchOrg type CKMLMV001-EKORG_ND,
flag type n value '0',
g_cnt6 type n value '0',
g_cnt7 type n value '0',
g_cnt8 type n value '0',
g_cnt9 type n value '0',
g_cnt10 type n value '0',
g_cnt11 type n value '0',
g_cnt12 type n value '0',
g_cnt13 type n value '0'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-011.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-006 for field s_matnr.
Select-Options : S_MATNR for CKMLMV003-MATNR .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-007 for field S_WERKS.
SELECT-OPTIONS:S_WERKS for CKMLMV003-WERKS Default '2003'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-008 for field S_GJAHR.
SELECT-OPTIONS:S_GJAHR for CKMLMv003-GJAHR default Sy-DATUM(4) .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-009 for field S_PERIO.
SELECT-OPTIONS:S_PERIO for CKMLMV003-PERIO .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(25) TEXT-010 for field P_MGTYP.
Parameters : P_MGTYP type CKMLMV003-MGTYP .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK b1 .
At Selection-Screen on s_matnr .
Perform Validate_MatNumber.
At Selection-Screen on s_werks .
Perform Validate_CostingPlant.
At Selection-Screen on s_GJAHR .
Perform Validate_FiscalYear.
At Selection-Screen on s_PERIO .
Perform Validate_Period.
At Selection-Screen on p_MGTYP .
Perform Validate_QuantityStrType.
*& Form Validate_MatNumber
text
Form Validate_MatNumber.
DATA l_MATNR TYPE CKMLMV003-MATNR.
IF NOT S_MATNR[] IS INITIAL .
CLEAR L_MATNR.
SELECT single MATNR FROM CKMLMV003
INTO l_MATNR
WHERE MATNR = s_MATNR-LOW or MATNR = s_MATNR-HIGH.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Material Number'(001).
ENDIF.
ENDIF.
ENDFORM. "Validate_MatNumber
*& Form Validate_CostingPlant
text
Form Validate_CostingPlant.
DATA l_werks TYPE CKMLMV003-WERKS.
IF NOT S_WERKS[] IS INITIAL .
CLEAR L_WERKS.
SELECT single WERKS FROM T001W
INTO l_WERKS
WHERE WERKS = s_WERKS-low or WERKS = s_WERKS-high.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Costing Plant'(002).
ENDIF.
ENDIF.
ENDFORM. "Validate_CostingPlant
*& Form Validate_FiscalYear
text
Form Validate_FiscalYear.
DATA l_GJAHR TYPE CKMLMV003-GJAHR.
IF NOT S_GJAHR-low IS INITIAL or S_GJAHR-high IS INITIAL.
CLEAR L_GJAHR.
SELECT SINGLE GJAHR FROM CKMLMV003
INTO l_GJAHR
WHERE GJAHR LE sy-DATUM(4) .
IF NOT S_GJAHR-low LE sy-DATUM(4) or S_GJAHR-high LE sy-DATUM(4).
MESSAGE e999 WITH
'Enter a Valid Fiscal year'(003).
ENDIF.
ENDIF.
ENDFORM. "Validate_FiscalYear
*& Form Validate_Period
text
Form Validate_Period.
DATA l_PERIO TYPE CKMLMV003-PERIO.
IF NOT S_PERIO[] IS INITIAL .
CLEAR L_PERIO.
SELECT single PERIO FROM CKMLMV003
INTO l_PERIO
WHERE PERIO GE 1 and PERIO LE 12 .
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Period'(004).
ENDIF.
ENDIF.
ENDFORM. "Validate_Period
*& Form Validate_QuantityStrType
text
Form Validate_QuantityStrType.
DATA l_MGTYP TYPE CKMLMV003-MGTYP.
IF NOT p_MGTYP IS INITIAL.
CLEAR L_MGTYP.
SELECT SINGLE MGTYP FROM CKMLMV003
INTO l_MGTYP
WHERE MGTYP = p_MGTYP .
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Quantity Structure Type'(005).
ENDIF.
ENDIF.
ENDFORM. "Validate_QuantityStrType
INITIALIZATION of Fields
Class LCL_EVENT_HANDLER DEFINITION.
Public section.
Methods:
TOP_OF_PAGE for Event TOP_OF_PAGE OF CL_GUI_ALV_GRID
IMPORTING E_DYNDOC_ID.
ENDCLASS. "LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD TOP_OF_PAGE.
Top-of-page event <br />
PERFORM EVENT_TOP_OF_PAGE USING G_DYNDOC_ID.
ENDMETHOD. "top_of_page
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
Data : G_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Initialization.
v_repid = sy-repid.
Start-of-Selection.
Perform get_CKMLMV003.
Perform get_CKMLMV001.
Perform Get_Finaldata.
Perform Layout_FieldCatalog.
call screen '101'.
Perform ALVGrid_Final_Display.
*& Form Layout_FieldCatalog
text
Form Layout_FieldCatalog.
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-024.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'GJAHR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-012.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'PERIO'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-013.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 4.
s_fieldcatalog-fieldname = 'WERKS'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-025.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 5.
s_fieldcatalog-fieldname = 'LIFNR_ND1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-014.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 6.
s_fieldcatalog-fieldname = 'MISCH_VERH1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-015.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 7.
s_fieldcatalog-fieldname = 'LIFNR_ND2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-016.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 8.
s_fieldcatalog-fieldname = 'MISCH_VERH2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-017.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 9.
s_fieldcatalog-fieldname = 'LIFNR_ND3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-018.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 10.
s_fieldcatalog-fieldname = 'MISCH_VERH3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-019.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 11.
s_fieldcatalog-fieldname = 'LIFNR_ND4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-020.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 12.
s_fieldcatalog-fieldname = 'MISCH_VERH4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-021.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 13.
s_fieldcatalog-fieldname = 'LIFNR_ND5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'MISCH_VERH5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
if g_cnt6 <> '0'.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'LIFNR_ND6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 15.
s_fieldcatalog-fieldname = 'MISCH_VERH6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt7 <> '0'.
s_fieldcatalog-col_pos = 16.
s_fieldcatalog-fieldname = 'LIFNR_ND7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 17.
s_fieldcatalog-fieldname = 'MISCH_VERH7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt8 <> '0'.
s_fieldcatalog-col_pos = 18.
s_fieldcatalog-fieldname = 'LIFNR_ND8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 19.
s_fieldcatalog-fieldname = 'MISCH_VERH8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt9 <> '0'.
s_fieldcatalog-col_pos = 20.
s_fieldcatalog-fieldname = 'LIFNR_ND9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 21.
s_fieldcatalog-fieldname = 'MISCH_VERH9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt10 <> '0'.
s_fieldcatalog-col_pos = 22.
s_fieldcatalog-fieldname = 'LIFNR_ND10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 23.
s_fieldcatalog-fieldname = 'MISCH_VERH10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt11 <> '0'.
s_fieldcatalog-col_pos = 24.
s_fieldcatalog-fieldname = 'LIFNR_ND11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 25.
s_fieldcatalog-fieldname = 'MISCH_VERH11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt12 <> '0'.
s_fieldcatalog-col_pos = 26.
s_fieldcatalog-fieldname = 'LIFNR_ND12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 27.
s_fieldcatalog-fieldname = 'MISCH_VERH12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt13 <> '0'.
s_fieldcatalog-col_pos = 29.
s_fieldcatalog-fieldname = 'LIFNR_ND13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 30.
s_fieldcatalog-fieldname = 'MISCH_VERH13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
ENDFORM. "Layout_FieldCatalog
*& Form get_CKMLMV003
text
Form get_CKMLMV003.
Select WERKS
MATNR
MISCH_VERH
KALNR_BAL
GJAHR
PERIO
MGTYP
from CKMLMV003
into table i_CKMLMV003_out
Where ( MATNR in s_MATNR and
WERKS in s_WERKS and
GJAHR in s_GJAHR and
PERIO in s_PERIO and
MGTYP = p_MGTYP ).
Sort i_CKMLMV003_out by MATNR KALNR_BAL.
ENDFORM. "get_CKMLMV003
*& Form get_CKMLMV001
text
Form get_CKMLMV001.
If Not i_CKMLMV003_out is Initial.
Select MATNR
KALNR
LIFNR_ND
EKORG_ND
from CKMLMV001
into Table i_CKMLMV001_out
for all entries in i_CKMLMV003_out
Where ( KALNR = i_CKMLMV003_out-KALNR_BAL
and WERKS = i_CKMLMV003_out-WERKS
and MATNR = i_CKMLMV003_out-MATNR ).
sort i_CKMLMV001_out by MATNR KALNR.
ENDIF.
ENDFORM. "get_CKMLMV001
*& Form Get_Finaldata
text
Form Get_Finaldata.
Loop at i_CKMLMV001_out into i_CKMLMV001_str.
Loop at i_CKMLMV003_out into i_CKMLMV003_str.
If ( i_CKMLMV001_str-KALNR = i_CKMLMV003_str-KALNR_BAL and i_CKMLMV003_str-MATNR = i_CKMLMV001_str-MATNR ) .
If ( flag = 0 ).
g_plant = i_CKMLMV003_str-WERKS.
g_PurchOrg = i_CKMLMV001_str-EKORG_ND.
g_quantstr = i_CKMLMV003_str-MGTYP.
flag = 1.
ENDIF.
Move i_CKMLMV003_str-MATNR to i_Final_str-MATNR.
Move i_CKMLMV003_str-WERKS to i_Final_str-WERKS.
Move i_CKMLMV003_str-GJAHR to i_Final_str-GJAHR.
Move i_CKMLMV003_str-PERIO to i_Final_str-PERIO.
Move i_CKMLMV003_str-MISCH_VERH to i_Final_str-MISCH_VERH1.
Move i_CKMLMV001_str-LIFNR_ND to i_Final_str-LIFNR_ND1.
Move-Corresponding i_CKMLMV003_str to i_CKMLMV003_temp.
Append i_Final_str to i_Final_out.
Clear : i_CKMLMV003_str .
ENDIF.
ENDLOOP.
Clear : i_CKMLMV001_str , i_Final_str , i_CKMLMV003_temp.
ENDLOOP.
Sort i_Final_out by WERKS MATNR GJAHR PERIO .
Loop at i_Final_out into i_Final_str.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO and i_Final_str-WERKS = i_Final_str1-WERKS.
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
When 6.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH6.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND6.
g_cnt6 = 1.
When 7.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH7.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND7.
g_cnt7 = 1.
When 8.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH8.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND8.
g_cnt8 = 1.
When 9.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH9.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND9.
g_cnt9 = 1.
When 10.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH10.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND10.
g_cnt10 = 1.
When 11.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH11.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND11.
g_cnt11 = 1.
When 12.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH12.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND12.
g_cnt12 = 1.
When 13.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH13.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND13.
g_cnt13 = 1.
ENDCASE.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO .
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
ENDCASE.
**Move-Corresponding i_Final_str to i_Final_str1.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
ENDFORM. "Get_Finaldata
*& Form top_of_page
text
Form top_of_page.
clear t_header.
refresh t_header.
i_header_str-typ = 'H'.
I_header_Str-info = Text-035.
append I_header_str to t_header.
clear I_header_str.
Date
I_header_str-typ = 'S'.
I_header_str-key = Text-036.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO I_header_str-info. "todays date
append I_header_str to t_header.
clear: I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Quantity Structure Type :'.
I_header_Str-info = g_QuantStr.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Purchase Org :'.
I_header_Str-info = g_PurchOrg.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Plant :'.
I_header_Str-info = g_Plant.
append I_header_str to t_header.
clear I_header_str.
CLEAR i_line_event_str.
i_line_event_str-name = 'TOP_OF_PAGE'.
APPEND i_line_event_str TO i_events.
call function 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
ENDFORM. "top_of_page
*& ALVGrid_Final_Display
Form ALVGrid_Final_Display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_DEFAULt = c_valx
i_callback_top_of_page = 'TOP_OF_PAGE'
i_Save = c_valx
it_fieldcat = t_fieldcatalog
it_sort = t_sort
it_events = I_events
TABLES
t_outtab = i_final_out1.
ENDFORM. "ALVGrid_Final_Display
*& Form ALVGRID_OO_Display
text
Form ALVGRID_OO_Display.
i_FCAT_str-col_pos = 1.
i_FCAT_str-fieldname = 'MATNR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = 'MATERIAL'.
i_fcat_str-scrtext_m = Text-024.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 2.
i_FCAT_str-fieldname = 'GJAHR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-012.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 3.
i_FCAT_str-fieldname = 'PERIO'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-013.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 4.
i_FCAT_str-fieldname = 'WERKS'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-025.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 5.
i_FCAT_str-fieldname = 'LIFNR_ND1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-014.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 6.
i_FCAT_str-fieldname = 'MISCH_VERH1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-015.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 7.
i_FCAT_str-fieldname = 'LIFNR_ND2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-016.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 8.
i_FCAT_str-fieldname = 'MISCH_VERH2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-017.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 9.
i_FCAT_str-fieldname = 'LIFNR_ND3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-018.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 10.
i_FCAT_str-fieldname = 'MISCH_VERH3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-019.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 11.
i_FCAT_str-fieldname = 'LIFNR_ND4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-020.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 12.
i_FCAT_str-fieldname = 'MISCH_VERH4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-021.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 13.
i_FCAT_str-fieldname = 'LIFNR_ND5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 14.
i_FCAT_str-fieldname = 'MISCH_VERH5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
if g_cnt6 <> '0'.
i_FCAT_str-col_pos = 15.
i_FCAT_str-fieldname = 'LIFNR_ND6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 16.
i_FCAT_str-fieldname = 'MISCH_VERH6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
ENDIF.
*if not grid1 is Initial.
If sy-SUBRC = 0.
Call Method grid1->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
CALL METHOD G_DYNDOC_ID->INITIALIZE_DOCUMENT
EXPORTING
BACKGROUND_COLOR = CL_DD_AREA=>COL_TEXTAREA.
Processing events <br />
CALL METHOD GRID1->LIST_PROCESSING_EVENTS
EXPORTING
I_EVENT_NAME = 'TOP_OF_PAGE'
I_DYNDOC_ID = G_DYNDOC_ID.
Call Method grid2->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
Endform. "ALVGRID_OO_Display
Form EVENT_TOP_OF_PAGE using DG_DYNDOC_ID
TYPE REF TO CL_DD_DOCUMENT.
DATA : DL_TEXT(255) TYPE C.
CALL METHOD DG_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = 'Flight Details'
SAP_STYLE = CL_DD_AREA=>HEADING
SAP_FONTSIZE = CL_DD_AREA=>LARGE
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
Endform.
*& Module STATUS_0101 OUTPUT
text
MODULE STATUS_0101 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
Create Object G_DYNDOC_ID
EXPORTING STYLE = 'ALV_GRID'.
if g_custom_container1 is initial .
create object g_custom_container1
Exporting
Container_name = CCCONTAINER1
Exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
Others = 5.
Create Object G_SPLITTER
Exporting PARENT = g_custom_container1.
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 1
COLUMN = 1
RECEIVING
CONTAINER = G_PARENT_TOP.
*Assigning the Part 2 to GRID
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 2
COLUMN = 1
RECEIVING
CONTAINER = g_parent_grid.Hi,
Check if any event is triggered from the event handler class, upon selection.
Usually, the events are handled on double click or on hotspot etc.
Regards,
Satish Kanteti -
Change Heading of the New Tab added through EEWB
hi,
I am working on transaction 'CRM_DNO_MONITOR' (this is the display business transaction from CRMD_ORDER).
I added a field to the transaction by EEWB. The name of the last tab was 'CUSTOMER FIELDS'. A new tab is added and the same name 'CUSTOMER FIELDS' is shown on it. (so now there are 2 tabs with the same name)
I modified the BADI 'ZEEW_CUSTOMER_H02' in the method 'CRM_CUSTOMER_H_SET_TITLE'. The title was set as 'DETAILS'. Now both the new tab and the last tab present previously have the NEW Title 'DETAILS.
Can you please guide me how to change the NEW TAB TITLE for this transaction. Thanks.
regards,
FSHi Fs
I have same problem. Can you please exactly let me know how did you fix the issue.
Regards
Hari -
Adding a authentication Header in the Envelope Header of SOAP Request
Hi Experts,
I want to send an authentication header as the Envelope header of the SOAP Request as follows.
<env:Header>
<AuthHeader>
<Id>MyOemId</Id>
<Password>MyOemPassword</Password>
<Domain>MyDomain</Domain>
<UId>MyUserId</UId>
<UPassword>MyPassword</UPassword>
</AuthHeader>
</env:Header>
<env:Body>
</env:Body>
If I include this as part of my Source XI message then it will go as a payload which is not the requirement.
Any suggestions for this?
Thanks
AjayIf I include this as part of my Source XI message then it will go as a payload
Try using the "Keep Header" parameter at soap sender communication channel.
Regards,
Prateek
Maybe you are looking for
-
Terrible battery life after going to ML (Macbook PRO 13" Early 2011 Mountain Lion 10.8.2)
I upgraded to ML little bit after it came out and kept the OSX uptodate. I have 10.8.2 right now and battery still SUkS. I dont think my battery is bad because it says "Condition: Normal". Is there any solution out there for this? or going back to Li
-
How Do you Make (Size) a Mini Photo?
I am in the WHCC Roes software program, creating a postcard. On the reverse side, I want to insert a small 2" x 1" photo. I therefore exported this size from LR3 (Image Sizing, Resize to Fit, Dimensions: 2.0 x 1.0, inches, and I clicked "Don't Enla
-
Driver for oracle enterpririse user
does creating a connection pool in weblogic for oracle enterprise user needs any special driver? , I can create connection pool for any normal user but if it is enterprise user connection to database is denied , what care should I take for an enterpr
-
Feature request: remember selected attribute in wizard
Hi, I often find myself doing this: - In the entity object wizard, select the 'attributes' tab - Click on an attribute - Select the 'Attribute settings' tab First feature request: It would be nice if the attribute settings tab would now show the prop
-
How to read value from Key flexfield added on to the newly created SIT
Hi Experts, I have a requirrment to display a new structure in the Special Information Types (SIT) screen in SSHR. The data entered into the segment needs to be validated using PL/SQL function. I have performed below steps to display the structure/fi