Adding a home page to a contact

Hi everyone - nice and basic but very difficult to figure out on my own - how do I add a home page attribute to one of my contacts?
Thanks for all your help
Miles

You're a gentlemen and a scholar - thankyou very much

Similar Messages

I go to my Google + home page and my contacts in the right colum are not showing, with a message pretaining to perhaps cookies

the page cannot be inported

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Adding a home page?

I have imported html pages, and everything went well, except that homepage is blank. How do I add one? (see figure 1). Moreover, the links at the top are repeated (see figure 2).

Hi there
Leon is right, you need to define a topic for the default.
However, I'm thinking the issues go deeper. If you are seeing repeated buttons (which we cannot see because you used the attach function and not the camera icon when you posted) my guess is that you are seeing WebHelp load inside WebHelp. And something is screwy with that for sure. The screwy part is likely the reason the page is blank.
You might try replying and using the camera icon to post that second image. That way we will see it immediately and it won't get stuck in a queued status.
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Error while Adding the PlaceHolder to Home Page using Jdev,UCM

Hi,
I am Using UCM and Jdev 11g.
I was creating a website using Oracle® Fusion Middleware Developer's Guide for Site Studio for External Applications
11g Release 1 (11.1.1).
I worked fine till creating the place Holder Definition , I was trying to add place holder to Home Page.
In this step I did not get the property 'Switch Placeholder Definition Role' in the List when exploring the node WebSite.
Plaese help me resolve this.

Hi chris,
Thank you for your response.
I am using oracle db. It seems that it is trying to insert record into L10_Locale table while portlet is added into home page. Does the record go to L10_LOCALE while adding portlet.
As per my knowledge, records goes to desktop,page and placement related tables while portlet is added.
When i see the L10_LOCALE existing records, it has two 2 records.
Encoding Language Country
UTF-8 en US
UTF-8 en
you said that Locale for the title or description is too long... Is it for Portlet's title of locale ...?
Then, what is the relation of title and this error ...
Please clarify this ...?
Regards,
Senthil

Creating contact shortcut on home page

Hello. This is my first post to the discussion. I just bought a Droid 3 and joined the community. I am trying to create shortcuts for frequently-used contacts on my Home Page. I did it once but can't seem to figure out how I did it. There was a menu with Shortcuts on it but I don't know how to get it back. Some instructions I read on a support page said to go to Home Page, touch Menu and then touch Add. But I don't see Add anywhere. Can you help? Thanks. PollySarar

try long pressing a home screen with available space on it (touch the screen and hold for a couple seconds and a menu should pop up)

Adding a Noteboard to home page

When adding a note board webpart to the Olso Homepage of a site that is a publishing site has shifted the "content portion" of the webpage to a right hand side align. This has only happened to my home page and when I undo the add it stays
to the right anyway. If i return to the previous page version I can "undo" this alignment but every time I add the note board, this shift occurs. It appears to have a 2 inch margin on the left. Any thoughts?

Ok I tried that - using some code I found on another instance of a question that was similar. Am I missing something? It didn't work. Let me know what you think please. Thanks!



Liz Sujka

Latest update 6001 ive lost contacts from home page, can i restore it?

hi
ive just done latest update to my phone 6.0.1 and ive lost contacts from my home page!, can i restore it?
Thank you
Neal

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*http://kb.mozillazine.org/Lost_bookmarks

Unlink Facebook 'home page' & contact pictures

I have Facebook contact sync off, but it has been synced before (so the pictures in their contact cards are their FB profile pictures). Is there a way to remove these photos and the 'home page'/facebook link, other than manually?
For example in each contact that was previously linked to a FB account, in their contact card there is a 'home page' field (fb://profile/00000) and a 'Facebook' field with their name. I want all of this crap gone!!
Thanks!

I agree is is not a third party issue. My phone has been crazy since the update (but wasn't great before). This is my second phone because of problems I have had with it. It does crazy things like when I unlock the screen the time is ALWAYS exactly an hour prior to the actual time (and the time zone is correct). Also, when I go to send a text message, the message appear correctly but if I click on them quickly when I start typing I am actually sending the message to the person that was in that message slot 24 hours before. My text messages no longer show my contact photos even though I don't have "phone only" checked. I have tried both with and without being synched to FB but still no success. And another weird thing, since the update I have discovered I am able to take a screen shot and that is without an app because I've never downloaded one or even tried that...it was an accident the first time and I did it again and again and it works. Craziest phone I've ever seen. I do want a solution to my photos being in my text message contacts. Their names are there with their numbers, just no photos, no matter if it is a saved photo from the phone or a FB linked contact

Finding my Add Contacts from the home page!

OK, I give up.
I'm new to this.
I just cannot fathom how to get to that screen shown in the tutorials, from the home page which appears when I sign in.
The screen I want is the one which actually lets you add contacts and make (Skype-to-Skype) calls.
If I can't get to it, Skype is useless.
Don't want to do anything flash. I just want to make Skype-to-Skype calls..!

Annykil wrote:
Thanks Tamim!
I've downloaded that link. But when I log in, it still takes me to an "Account Homepage" which offers no facility for actually making calls.
How do I get to that nice little page with the "Add Contacts" option shown in the tutorials?
(It's a while since anything has made me actually weep with frustration!)
- Anny
Have you logged in via Skype client?
please see-
http://community.skype.com/t5/Windows/Skype-App-Account-Page/td-p/399573
Try this.
try to Reset Internet Explorer settings.
http://support.microsoft.com/kb/923737
try to delete temporary internet files
http://support.microsoft.com/kb/260897
now try running skype; if still the issue persists
try to open the page with internet explorer and post the result
http://javatester.org/javascript.html
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

"Use Current Page" to save home pages/tabs is greyed out, even though I have a fresh install of ver. 22 with no added plugins or extensions. How can I fix?

When I try to save my home pages / tabs, I can't, because this option is greyed out. I even uninstalled FF with Revo Uninstaller completely, reinstalled with no new plugins or extensions, and it remains greyed out. The only thing that I can do, is pin the tabs, but I wish to be able to use this option. If I can't, I won't know if its Firefox, or malware or? Thank you in advance for any help. Windows 7 Premium SP1, Firefox ver. 22

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

How do I remove the automatically added index.html from my home page domain?

I've just recently noticed that muse adds index.html to my home page. I would like to remove it and revert back to how it used to be. This is the 2nd website I have this problem with

Hi
I am afraid, this is system default process and it is not possible to change the file name for the very first page created in Adobe Muse from index.html to home or any other file name.
You may also want to refer to some articles to know why it is important to have index.html page within your site : What Is the index.html Page - Default Web Pages , Home page - Wikipedia, the free encyclopedia

20 hrs on install, still no home page

hello,
i am trying to install oraclexe (10.2.0) on windows xp sp2, no firewall. my install completes. however, there are errors. here is an install error in C:\oraclexe\app\oracle\product\10.2.0\server\config\log\postDBCreation.log:
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
after the install, i can not connect to home page, i can not connect to DB. i would like to have a clean install. but if we have to debug existing install, no prob.
here is a lot of data which i have been tracking based on others' related install issues.
C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\listener.ora (I added the TRACE line only):
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
TRACE_LEVEL_LISTENER = SUPPORT
C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\sqlnet.ora:
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\tnsnames.ora:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
after completing the install, from a cmd prompt i ran >sqlplus sysdba@XE - here is the std out:
C:\Documents and Settings\Owner>sqlplus sysdba@XE
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Mar 14 14:40:21 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
and here is the contents of file C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\trace\listener.trc (just for the attempted sqlplus connection):
     CONNECTION REQUEST
[14-MAR-2006 14:40:25:468] nsevfnt: cxd: 0xa79628 stage 0: NS events set:
     INCOMING CALL
[14-MAR-2006 14:40:25:468] nsevwait: event is 0x1, on 2
[14-MAR-2006 14:40:25:468] nsevwait: 1 posted event(s)
[14-MAR-2006 14:40:25:468] nsevwait: exit (0)
[14-MAR-2006 14:40:25:468] nsglhe: entry
[14-MAR-2006 14:40:25:468] nsglhe: Event on cxd 0xa79628.
[14-MAR-2006 14:40:25:468] nsglhc: Allocating cxd 0xb1bf38
[14-MAR-2006 14:40:25:468] nsanswer: entry
[14-MAR-2006 14:40:25:468] nsopen: entry
[14-MAR-2006 14:40:25:468] nsmal: entry
[14-MAR-2006 14:40:25:468] nsmal: 736 bytes at 0xb01858
[14-MAR-2006 14:40:25:468] nsmal: normal exit
[14-MAR-2006 14:40:25:468] nsopenmplx: entry
[14-MAR-2006 14:40:25:468] nsmal: entry
[14-MAR-2006 14:40:25:468] nsmal: 1644 bytes at 0xaba008
[14-MAR-2006 14:40:25:468] nsmal: normal exit
[14-MAR-2006 14:40:25:468] nsiorini: entry
[14-MAR-2006 14:40:25:468] nsbal: entry
[14-MAR-2006 14:40:25:468] nsbgetfl: entry
[14-MAR-2006 14:40:25:468] nsbgetfl: normal exit
[14-MAR-2006 14:40:25:468] nsmal: entry
[14-MAR-2006 14:40:25:468] nsmal: 84 bytes at 0xab7a80
[14-MAR-2006 14:40:25:468] nsmal: normal exit
[14-MAR-2006 14:40:25:468] nsbal: normal exit
[14-MAR-2006 14:40:25:468] nsiorini: exit (0)
[14-MAR-2006 14:40:25:468] nscpxget: entry
[14-MAR-2006 14:40:25:468] nscpxget: normal exit
[14-MAR-2006 14:40:25:468] nsopenalloc_nsntx: nlhthput on mplx_ht_nsgbu:ctx=b01858, nsntx=aba008
[14-MAR-2006 14:40:25:468] nsopenmplx: normal exit
[14-MAR-2006 14:40:25:468] nsopen: opening transport...
[14-MAR-2006 14:40:25:468] nttcon: entry
[14-MAR-2006 14:40:25:468] nttcon: toc = 3
[14-MAR-2006 14:40:25:468] nttcnp: entry
[14-MAR-2006 14:40:25:468] nttcnp: getting sockname
[14-MAR-2006 14:40:25:468] nttcnp: getting peername
[14-MAR-2006 14:40:25:468] nttcnp: exit
[14-MAR-2006 14:40:25:468] nttcnr: entry
[14-MAR-2006 14:40:25:468] nttcnr: waiting to accept a connection.
[14-MAR-2006 14:40:25:484] nttcnr: getting sockname
[14-MAR-2006 14:40:25:484] snlinGetNameInfo: entry
[14-MAR-2006 14:40:25:484] snlinGetNameInfo: Using numeric form of host's address 127.0.0.1
[14-MAR-2006 14:40:25:484] snlinGetNameInfo: exit
[14-MAR-2006 14:40:25:484] nttcnr: connected on ipaddr 127.0.0.1
[14-MAR-2006 14:40:25:484] nttvlser: entry
[14-MAR-2006 14:40:25:484] snlinGetNameInfo: entry
[14-MAR-2006 14:40:25:484] snlinGetNameInfo: Using numeric form of host's address 127.0.0.1
[14-MAR-2006 14:40:25:484] snlinGetNameInfo: exit
[14-MAR-2006 14:40:25:484] nttvlser: valid node check on incoming node 127.0.0.1
[14-MAR-2006 14:40:25:484] nttvlser: Accepted Entry: 127.0.0.1
[14-MAR-2006 14:40:25:484] nttcnr: exit
[14-MAR-2006 14:40:25:484] nttcon: NT layer TCP/IP connection has been established.
[14-MAR-2006 14:40:25:484] nttcon: set TCP_NODELAY on 256
[14-MAR-2006 14:40:25:484] nttcon: exit
[14-MAR-2006 14:40:25:484] nsiorecycle: entry
[14-MAR-2006 14:40:25:484] nsiorecycle: exit
[14-MAR-2006 14:40:25:484] nsopen: transport is open
[14-MAR-2006 14:40:25:484] nsnainit: entry
[14-MAR-2006 14:40:25:484] nsnainit: answer
[14-MAR-2006 14:40:25:484] nsnadct: entry
[14-MAR-2006 14:40:25:484] nsnadct: normal exit
[14-MAR-2006 14:40:25:484] nsnasvnainfo: entry
[14-MAR-2006 14:40:25:484] nsnasvnainfo: NA disabled for this connection
[14-MAR-2006 14:40:25:484] nsnasvnainfo: normal exit
[14-MAR-2006 14:40:25:484] nainit: entry
[14-MAR-2006 14:40:25:484] nagblini: entry
[14-MAR-2006 14:40:25:484] nau_gin: entry
[14-MAR-2006 14:40:25:484] nau_gparams: entry
[14-MAR-2006 14:40:25:484] nam_gbp: Reading parameter "sqlnet.authentication_required" from parameter file
[14-MAR-2006 14:40:25:484] nam_gbp: Parameter not found
[14-MAR-2006 14:40:25:484] nau_gparams: Using default value "FALSE"
[14-MAR-2006 14:40:25:500] nau_gslf: entry
[14-MAR-2006 14:40:25:500] nam_gic: entry
[14-MAR-2006 14:40:25:500] nam_gic: Counting # of items in "sqlnet.authentication_services" parameter
[14-MAR-2006 14:40:25:500] nam_gic: Parameter not found
[14-MAR-2006 14:40:25:500] nam_gic: Found 0 items
[14-MAR-2006 14:40:25:500] nam_gic: exit
[14-MAR-2006 14:40:25:500] nau_gslf: Using default value "all available adapters"
[14-MAR-2006 14:40:25:500] nauss_set_state: entry
[14-MAR-2006 14:40:25:500] nauss_set_state: exit
[14-MAR-2006 14:40:25:500] nau_gslf: exit
[14-MAR-2006 14:40:25:500] nau_gparams: exit
[14-MAR-2006 14:40:25:500] nau_gin: exit
[14-MAR-2006 14:40:25:500] nagblini: exit
[14-MAR-2006 14:40:25:500] na_saveprot: entry
[14-MAR-2006 14:40:25:500] na_saveprot: exit
[14-MAR-2006 14:40:25:500] nacomin: entry
[14-MAR-2006 14:40:25:500] nas_init: entry
[14-MAR-2006 14:40:25:500] nas_init: exit
[14-MAR-2006 14:40:25:500] nau_ini: entry
[14-MAR-2006 14:40:25:500] naugcp_get_connect_parameters: entry
[14-MAR-2006 14:40:25:500] nauss_set_state: entry
[14-MAR-2006 14:40:25:500] nauss_set_state: exit
[14-MAR-2006 14:40:25:500] naugcp_get_connect_parameters: exit
[14-MAR-2006 14:40:25:500] nau_gettab: entry
[14-MAR-2006 14:40:25:500] nau_gettab: using authentication adapter table "nautab"
[14-MAR-2006 14:40:25:500] nau_gettab: nautab contains the following services:
[14-MAR-2006 14:40:25:500] nau_gettab:      KERBEROS5
[14-MAR-2006 14:40:25:500] nau_gettab:      NTS
[14-MAR-2006 14:40:25:500] nau_gettab:      RADIUS
[14-MAR-2006 14:40:25:500] nau_gettab: exit
[14-MAR-2006 14:40:25:500] nau_sini: entry
[14-MAR-2006 14:40:25:500] nau_sini: exit
[14-MAR-2006 14:40:25:500] nau_ini: connection type: "standard"
[14-MAR-2006 14:40:25:500] nau_ini: exit
[14-MAR-2006 14:40:25:500] naeeinit: entry
[14-MAR-2006 14:40:25:500] nam_gbp: Reading parameter "SQLNET.FIPS_140" from parameter file
[14-MAR-2006 14:40:25:500] nam_gbp: Parameter not found
[14-MAR-2006 14:40:25:500] nam_gnsp: Reading parameter "SQLNET.ENCRYPTION_SERVER" from parameter file
[14-MAR-2006 14:40:25:500] nam_gnsp: Parameter not found
[14-MAR-2006 14:40:25:500] naequad: Using default value "ACCEPTED"
[14-MAR-2006 14:40:25:500] nam_gic: entry
[14-MAR-2006 14:40:25:500] nam_gic: Counting # of items in "SQLNET.ENCRYPTION_TYPES_SERVER" parameter
[14-MAR-2006 14:40:25:500] nam_gic: Parameter not found
[14-MAR-2006 14:40:25:500] nam_gic: exit
[14-MAR-2006 14:40:25:500] naesno: Using default value "all available algorithms"
[14-MAR-2006 14:40:25:500] naeshow: entry
[14-MAR-2006 14:40:25:500] naeshow: These are the encryption algorithms that the server will accept, in decreasing order of preference:
[14-MAR-2006 14:40:25:500] naeshow: Choice 0: no algorithm; encryption inactive
[14-MAR-2006 14:40:25:500] naeshow: Choice 1: 'AES256' (ID 17)
[14-MAR-2006 14:40:25:500] naeshow: Choice 2: 'RC4_256' (ID 6)
[14-MAR-2006 14:40:25:500] naeshow: Choice 3: 'AES192' (ID 16)
[14-MAR-2006 14:40:25:500] naeshow: Choice 4: '3DES168' (ID 12)
[14-MAR-2006 14:40:25:500] naeshow: Choice 5: 'AES128' (ID 15)
[14-MAR-2006 14:40:25:500] naeshow: Choice 6: 'RC4_128' (ID 10)
[14-MAR-2006 14:40:25:500] naeshow: Choice 7: '3DES112' (ID 11)
[14-MAR-2006 14:40:25:500] naeshow: Choice 8: 'RC4_56' (ID 8)
[14-MAR-2006 14:40:25:500] naeshow: Choice 9: 'DES' (ID 2)
[14-MAR-2006 14:40:25:500] naeshow: Choice 10: 'RC4_40' (ID 1)
[14-MAR-2006 14:40:25:500] naeshow: Choice 11: 'DES40' (ID 3)
[14-MAR-2006 14:40:25:500] naeshow: exit
[14-MAR-2006 14:40:25:500] naeeinit: exit
[14-MAR-2006 14:40:25:500] naecinit: entry
[14-MAR-2006 14:40:25:500] nam_gnsp: Reading parameter "SQLNET.CRYPTO_CHECKSUM_SERVER" from parameter file
[14-MAR-2006 14:40:25:500] nam_gnsp: Parameter not found
[14-MAR-2006 14:40:25:500] naequad: Using default value "ACCEPTED"
[14-MAR-2006 14:40:25:500] nam_gic: entry
[14-MAR-2006 14:40:25:500] nam_gic: Counting # of items in "SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER" parameter
[14-MAR-2006 14:40:25:500] nam_gic: Parameter not found
[14-MAR-2006 14:40:25:500] nam_gic: exit
[14-MAR-2006 14:40:25:500] naesno: Using default value "all available algorithms"
[14-MAR-2006 14:40:25:500] naeshow: entry
[14-MAR-2006 14:40:25:500] naeshow: These are the checksumming algorithms that the server will accept, in decreasing order of preference:
[14-MAR-2006 14:40:25:500] naeshow: Choice 0: no algorithm; checksumming inactive
[14-MAR-2006 14:40:25:500] naeshow: Choice 1: 'SHA1' (ID 3)
[14-MAR-2006 14:40:25:500] naeshow: Choice 2: 'MD5' (ID 1)
[14-MAR-2006 14:40:25:500] naeshow: exit
[14-MAR-2006 14:40:25:500] naecinit: exit
[14-MAR-2006 14:40:25:500] nainit: native services disabled - disconnecting
[14-MAR-2006 14:40:25:500] nadisc: entry
[14-MAR-2006 14:40:25:500] nacomtm: entry
[14-MAR-2006 14:40:25:500] nacompd: entry
[14-MAR-2006 14:40:25:500] nacompd: exit
[14-MAR-2006 14:40:25:500] nacompd: entry
[14-MAR-2006 14:40:25:500] nacompd: exit
[14-MAR-2006 14:40:25:500] nacomtm: exit
[14-MAR-2006 14:40:25:500] nas_dis: entry
[14-MAR-2006 14:40:25:500] nas_dis: exit
[14-MAR-2006 14:40:25:500] nau_dis: entry
[14-MAR-2006 14:40:25:500] nau_dis: exit
[14-MAR-2006 14:40:25:500] naeetrm: entry
[14-MAR-2006 14:40:25:500] naeetrm: exit
[14-MAR-2006 14:40:25:500] naectrm: entry
[14-MAR-2006 14:40:25:500] naectrm: exit
[14-MAR-2006 14:40:25:500] nagbltrm: entry
[14-MAR-2006 14:40:25:500] nau_gtm: entry
[14-MAR-2006 14:40:25:500] nau_gtm: exit
[14-MAR-2006 14:40:25:500] nagbltrm: exit
[14-MAR-2006 14:40:25:500] nadisc: exit
[14-MAR-2006 14:40:25:500] nainit: exit
[14-MAR-2006 14:40:25:500] nsnainit: NS Connection version: 313
[14-MAR-2006 14:40:25:500] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
[14-MAR-2006 14:40:25:500] nsnainit: "or" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
[14-MAR-2006 14:40:25:500] nsnainit: "or" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
"and" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
[14-MAR-2006 14:40:25:500] nsnainit: normal exit
[14-MAR-2006 14:40:25:500] nsopen: global context check-in (to slot 4) complete
[14-MAR-2006 14:40:25:500] nsopen: lcl[0]=0xf4ffefff, lcl[1]=0x12003, gbl[0]=0x7abf, gbl[1]=0x2001, tdu=32767, sdu=8192
[14-MAR-2006 14:40:25:500] nsdo: entry
[14-MAR-2006 14:40:25:500] nsdo: cid=4, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x2
[14-MAR-2006 14:40:25:500] nsdo: rank=64, nsctxrnk=0
[14-MAR-2006 14:40:25:500] nsdo: nsctx: state=7, flg=0x4000, mvd=0
[14-MAR-2006 14:40:25:500] nsbal: entry
[14-MAR-2006 14:40:25:500] nsbgetfl: entry
[14-MAR-2006 14:40:25:500] nsbgetfl: normal exit
[14-MAR-2006 14:40:25:500] nsmal: entry
[14-MAR-2006 14:40:25:500] nsmal: 84 bytes at 0xb005f0
[14-MAR-2006 14:40:25:500] nsmal: normal exit
[14-MAR-2006 14:40:25:500] nsbal: normal exit
[14-MAR-2006 14:40:25:500] nsbal: entry
[14-MAR-2006 14:40:25:500] nsbgetfl: entry
[14-MAR-2006 14:40:25:500] nsbgetfl: normal exit
[14-MAR-2006 14:40:25:500] nsmal: entry
[14-MAR-2006 14:40:25:500] nsmal: 84 bytes at 0xb01c38
[14-MAR-2006 14:40:25:500] nsmal: normal exit
[14-MAR-2006 14:40:25:500] nsbal: normal exit
[14-MAR-2006 14:40:25:500] nsdo: nsctxrnk=0
[14-MAR-2006 14:40:25:500] nsdo: normal exit
[14-MAR-2006 14:40:25:500] nsopen: normal exit
[14-MAR-2006 14:40:25:500] nsanswer: deferring connect attempt; at stage 5
[14-MAR-2006 14:40:25:500] nsanswer: normal exit
[14-MAR-2006 14:40:25:500] nsevreg: entry
[14-MAR-2006 14:40:25:500] nsevreg: begin registration process for 4
[14-MAR-2006 14:40:25:500] nsevregPrePost: entry
[14-MAR-2006 14:40:25:500] nsevregPrePost: normal exit
[14-MAR-2006 14:40:25:500] nsevreg: sgt=0, evn=4, evt[2]=0x0
[14-MAR-2006 14:40:25:500] nsevreg: begin notification process for 4
[14-MAR-2006 14:40:25:500] nsevregAffectNotif: entry
[14-MAR-2006 14:40:25:500] nsrah: entry
[14-MAR-2006 14:40:25:500] nsrah: setting transport read mode (2)
[14-MAR-2006 14:40:25:500] nttctl: entry
[14-MAR-2006 14:40:25:500] nttctl: Clearing non-blocking mode
[14-MAR-2006 14:40:25:500] nttctl: entry
[14-MAR-2006 14:40:25:500] nttctl: Setting connection into async mode
[14-MAR-2006 14:40:25:500] nsrah: normal exit
[14-MAR-2006 14:40:25:500] nsevregAffectNotif: exit (0)
[14-MAR-2006 14:40:25:500] nsevreg: rdm=2, sgt=0, evt[0]=0x20, [1]=0x20, [2]=0x0, nrg=0
[14-MAR-2006 14:40:25:500] nsevreg: registering for 0x20
[14-MAR-2006 14:40:25:500] nsiorasy: entry
[14-MAR-2006 14:40:25:500] nsiorecv: entry
[14-MAR-2006 14:40:25:500] nttmrd: entry
[14-MAR-2006 14:40:25:500] nttrd: entry
[14-MAR-2006 14:40:25:500] snttcallback: entry
[14-MAR-2006 14:40:25:500] snttcallback: exit
[14-MAR-2006 14:40:25:500] nttrd: socket 256 had bytes read=277
[14-MAR-2006 14:40:25:500] nttrd: exit
[14-MAR-2006 14:40:25:500] nsiorecv: exit (0)
[14-MAR-2006 14:40:25:500] nsiorasy: exit (0)
[14-MAR-2006 14:40:25:500] nsiooverflow: entry
[14-MAR-2006 14:40:25:500] nsiooverflow: exit (1)
[14-MAR-2006 14:40:25:500] nsevreg: normal exit
[14-MAR-2006 14:40:25:500] nsglhe: exit
[14-MAR-2006 14:40:25:500] nsevwait: entry
[14-MAR-2006 14:40:25:500] nsevwait: 4 registered connection(s)
[14-MAR-2006 14:40:25:500] nsevwait: 1 pre-posted event(s)
[14-MAR-2006 14:40:25:500] nsevwait: waiting for transport event (0 thru 4)...
[14-MAR-2006 14:40:25:500] nsevwait: 0 newly-posted event(s)
[14-MAR-2006 14:40:25:500] nsevwait: 1 pre-posted event(s)
[14-MAR-2006 14:40:25:500] nsevdansw: entry
[14-MAR-2006 14:40:25:500] nsevdansw: at STAGE 5
[14-MAR-2006 14:40:25:500] nsdo: entry
[14-MAR-2006 14:40:25:500] nsdo: cid=4, opcode=68, bl=2040, what=8, uflgs=0x0, cflgs=0x3
[14-MAR-2006 14:40:25:500] nsdo: rank=64, nsctxrnk=0
[14-MAR-2006 14:40:25:500] nsdo: nsctx: state=14, flg=0x4004, mvd=0
[14-MAR-2006 14:40:25:500] nsdo: gtn=10, gtc=10, ptn=10, ptc=8155
[14-MAR-2006 14:40:25:500] nscon: entry
[14-MAR-2006 14:40:25:500] nscon: doing connect handshake...
[14-MAR-2006 14:40:25:500] nscon: recving a packet
[14-MAR-2006 14:40:25:500] nsiooverflow: entry
[14-MAR-2006 14:40:25:500] nsiooverflow: exit (1)
[14-MAR-2006 14:40:25:500] nsprecv: entry
[14-MAR-2006 14:40:25:500] nsprecv: 277 bytes from leftover
[14-MAR-2006 14:40:25:500] nsprecv: tlen=277, plen=277, type=1
[14-MAR-2006 14:40:25:500] nsprecv: packet dump
[14-MAR-2006 14:40:25:500] nsprecv: 01 15 00 00 01 00 00 00 |........|
[14-MAR-2006 14:40:25:500] nsprecv: 01 39 01 2C 00 00 08 00 |.9.,....|
[14-MAR-2006 14:40:25:500] nsprecv: 7F FF C6 0E 00 00 01 00 |........|
[14-MAR-2006 14:40:25:500] nsprecv: 00 DB 00 3A 00 00 02 00 |...:....|
[14-MAR-2006 14:40:25:500] nsprecv: 61 61 00 00 00 00 00 00 |aa......|
[14-MAR-2006 14:40:25:500] nsprecv: 00 00 00 00 00 00 00 00 |........|
[14-MAR-2006 14:40:25:500] nsprecv: 00 00 00 00 00 00 00 00 |........|
[14-MAR-2006 14:40:25:500] nsprecv: 00 00 28 44 45 53 43 52 |..(DESCR|
[14-MAR-2006 14:40:25:500] nsprecv: 49 50 54 49 4F 4E 3D 28 |IPTION=(|
[14-MAR-2006 14:40:25:500] nsprecv: 41 44 44 52 45 53 53 3D |ADDRESS=|
[14-MAR-2006 14:40:25:500] nsprecv: 28 50 52 4F 54 4F 43 4F |(PROTOCO|
[14-MAR-2006 14:40:25:500] nsprecv: 4C 3D 54 43 50 29 28 48 |L=TCP)(H|
[14-MAR-2006 14:40:25:500] nsprecv: 4F 53 54 3D 6C 6F 63 61 |OST=loca|
[14-MAR-2006 14:40:25:500] nsprecv: 6C 68 6F 73 74 29 28 50 |lhost)(P|
[14-MAR-2006 14:40:25:500] nsprecv: 4F 52 54 3D 31 35 32 31 |ORT=1521|
[14-MAR-2006 14:40:25:500] nsprecv: 29 29 28 43 4F 4E 4E 45 |))(CONNE|
[14-MAR-2006 14:40:25:500] nsprecv: 43 54 5F 44 41 54 41 3D |CT_DATA=|
[14-MAR-2006 14:40:25:500] nsprecv: 28 53 45 52 56 45 52 3D |(SERVER=|
[14-MAR-2006 14:40:25:500] nsprecv: 44 45 44 49 43 41 54 45 |DEDICATE|
[14-MAR-2006 14:40:25:500] nsprecv: 44 29 28 53 45 52 56 49 |D)(SERVI|
[14-MAR-2006 14:40:25:500] nsprecv: 43 45 5F 4E 41 4D 45 3D |CE_NAME=|
[14-MAR-2006 14:40:25:500] nsprecv: 58 45 29 28 43 49 44 3D |XE)(CID=|
[14-MAR-2006 14:40:25:500] nsprecv: 28 50 52 4F 47 52 41 4D |(PROGRAM|
[14-MAR-2006 14:40:25:500] nsprecv: 3D 43 3A 5C 6F 72 61 63 |=C:\orac|
[14-MAR-2006 14:40:25:500] nsprecv: 6C 65 78 65 5C 61 70 70 |lexe\app|
[14-MAR-2006 14:40:25:500] nsprecv: 5C 6F 72 61 63 6C 65 5C |\oracle\|
[14-MAR-2006 14:40:25:500] nsprecv: 70 72 6F 64 75 63 74 5C |product\|
[14-MAR-2006 14:40:25:500] nsprecv: 31 30 2E 32 2E 30 5C 73 |10.2.0\s|
[14-MAR-2006 14:40:25:500] nsprecv: 65 72 76 65 72 5C 62 69 |erver\bi|
[14-MAR-2006 14:40:25:500] nsprecv: 6E 5C 73 71 6C 70 6C 75 |n\sqlplu|
[14-MAR-2006 14:40:25:500] nsprecv: 73 2E 65 78 65 29 28 48 |s.exe)(H|
[14-MAR-2006 14:40:25:500] nsprecv: 4F 53 54 3D 4C 4F 43 41 |OST=LOCA|
[14-MAR-2006 14:40:25:500] nsprecv: 4C 48 4F 53 54 29 28 55 |LHOST)(U|
[14-MAR-2006 14:40:25:500] nsprecv: 53 45 52 3D 4F 77 6E 65 |SER=Owne|
[14-MAR-2006 14:40:25:500] nsprecv: 72 29 29 29 29 |r)))) |
[14-MAR-2006 14:40:25:500] nsprecv: normal exit
[14-MAR-2006 14:40:25:500] nscon: got NSPTCN packet
[14-MAR-2006 14:40:25:500] nsconneg: entry
[14-MAR-2006 14:40:25:500] nsconneg: vsn=313, lov=300, opt=0x0, sdu=2048, tdu=32767, ntc=0xc60e
[14-MAR-2006 14:40:25:500] nsconneg: vsn=313, gbl=0x1, sdu=2048, tdu=32767
[14-MAR-2006 14:40:25:500] nsconneg: normal exit
[14-MAR-2006 14:40:25:500] nscon: got 219 bytes connect data
[14-MAR-2006 14:40:25:500] nscon: exit (0)
[14-MAR-2006 14:40:25:500] nsdo: nsctxrnk=0
[14-MAR-2006 14:40:25:500] nsdo: normal exit
[14-MAR-2006 14:40:25:500] nsevdrcvreq: entry
[14-MAR-2006 14:40:25:500] nsevdansw: exit
[14-MAR-2006 14:40:25:500] nsevwait: event is 0x20, on 4
[14-MAR-2006 14:40:25:500] nsevwait: 1 posted event(s)
[14-MAR-2006 14:40:25:500] nsevwait: exit (0)
[14-MAR-2006 14:40:25:500] nsglhe: entry
[14-MAR-2006 14:40:25:500] nsglhe: Event on cxd 0xb1bf38.
[14-MAR-2006 14:40:25:500] nsglfc: Assume establishing a connection...
[14-MAR-2006 14:40:25:500] nsglfc: command = establish
[14-MAR-2006 14:40:25:500] nsglauthorized: entry
[14-MAR-2006 14:40:25:500] nsglauthorized: Determining auth method...
[14-MAR-2006 14:40:25:500] nsglauthorized: No authorization needed.
[14-MAR-2006 14:40:25:500] nsglecmd: entry
[14-MAR-2006 14:40:25:500] nttaddr2bnd: entry
[14-MAR-2006 14:40:25:500] snlinGetNameInfo: entry
[14-MAR-2006 14:40:25:500] snlinGetNameInfo: Using numeric form of host's address 127.0.0.1
[14-MAR-2006 14:40:25:500] snlinGetNameInfo: exit
[14-MAR-2006 14:40:25:500] nttaddr2bnd: Resolved to 127.0.0.1
[14-MAR-2006 14:40:25:500] nttaddr2bnd: exit
[14-MAR-2006 14:40:25:500] nsglbgetRSPidx: entry
[14-MAR-2006 14:40:25:500] nsglbgetRSPidx: returning ecode=0
[14-MAR-2006 14:40:25:500] nsglbgetRSPidx: exit
[14-MAR-2006 14:40:25:500] nsglb: entry
[14-MAR-2006 14:40:25:500] nsglb: exit
[14-MAR-2006 14:40:25:500] nsglrespond: entry
[14-MAR-2006 14:40:25:500] nsrefuse: entry
[14-MAR-2006 14:40:25:500] nsdo: entry
[14-MAR-2006 14:40:25:500] nsdo: cid=4, opcode=67, bl=91, what=10, uflgs=0x0, cflgs=0x3
[14-MAR-2006 14:40:25:500] nsdo: rank=64, nsctxrnk=0
[14-MAR-2006 14:40:25:500] nsdo: nsctx: state=2, flg=0x4004, mvd=0
[14-MAR-2006 14:40:25:500] nsdo: gtn=277, gtc=277, ptn=10, ptc=2011
[14-MAR-2006 14:40:25:500] nscon: entry
[14-MAR-2006 14:40:25:500] nscon: sending NSPTRF packet
[14-MAR-2006 14:40:25:500] nspsend: entry
[14-MAR-2006 14:40:25:500] nspsend: plen=103, type=4
[14-MAR-2006 14:40:25:500] nsiosend: entry
[14-MAR-2006 14:40:25:500] nttmwr: entry
[14-MAR-2006 14:40:25:500] nttwr: entry
[14-MAR-2006 14:40:25:500] snttcallback: entry
[14-MAR-2006 14:40:25:500] snttcallback: exit
[14-MAR-2006 14:40:25:500] nttwr: socket 256 had bytes written=103
[14-MAR-2006 14:40:25:500] nttwr: exit
[14-MAR-2006 14:40:25:500] nsiosend: exit (0)
[14-MAR-2006 14:40:25:500] nspsend: packet dump
[14-MAR-2006 14:40:25:500] nspsend: 00 67 00 00 04 00 00 00 |.g......|
[14-MAR-2006 14:40:25:500] nspsend: 22 00 00 5B 28 44 45 53 |"..[(DES|
[14-MAR-2006 14:40:25:500] nspsend: 43 52 49 50 54 49 4F 4E |CRIPTION|
[14-MAR-2006 14:40:25:500] nspsend: 3D 28 54 4D 50 3D 29 28 |=(TMP=)(|
[14-MAR-2006 14:40:25:500] nspsend: 56 53 4E 4E 55 4D 3D 31 |VSNNUM=1|
[14-MAR-2006 14:40:25:500] nspsend: 36 39 38 36 39 35 36 38 |69869568|
[14-MAR-2006 14:40:25:500] nspsend: 29 28 45 52 52 3D 31 32 |)(ERR=12|
[14-MAR-2006 14:40:25:500] nspsend: 35 31 34 29 28 45 52 52 |514)(ERR|
[14-MAR-2006 14:40:25:500] nspsend: 4F 52 5F 53 54 41 43 4B |OR_STACK|
[14-MAR-2006 14:40:25:500] nspsend: 3D 28 45 52 52 4F 52 3D |=(ERROR=|
[14-MAR-2006 14:40:25:500] nspsend: 28 43 4F 44 45 3D 31 32 |(CODE=12|
[14-MAR-2006 14:40:25:500] nspsend: 35 31 34 29 28 45 4D 46 |514)(EMF|
[14-MAR-2006 14:40:25:500] nspsend: 49 3D 34 29 29 29 29 |I=4)))) |
[14-MAR-2006 14:40:25:500] nspsend: 103 bytes to transport
[14-MAR-2006 14:40:25:500] nspsend: normal exit
[14-MAR-2006 14:40:25:500] nscon: exit (0)
[14-MAR-2006 14:40:25:500] nsdo: nsctxrnk=0
[14-MAR-2006 14:40:25:500] nsdo: normal exit
[14-MAR-2006 14:40:25:500] nsiorasy: entry
[14-MAR-2006 14:40:25:500] nsiorecv: entry
[14-MAR-2006 14:40:25:500] nttmrd: entry
[14-MAR-2006 14:40:25:500] nttrd: entry
[14-MAR-2006 14:40:25:500] snttcallback: entry
[14-MAR-2006 14:40:25:500] snttcallback: exit
[14-MAR-2006 14:40:25:500] nttrd: exit
[14-MAR-2006 14:40:25:500] ntt2err: entry
[14-MAR-2006 14:40:25:500] ntt2err: Read unexpected EOF ERROR on 256
[14-MAR-2006 14:40:25:500] ntt2err: exit
[14-MAR-2006 14:40:25:500] nsiorecv: exit (-1)
[14-MAR-2006 14:40:25:500] nsiorasy: exit (0)
[14-MAR-2006 14:40:25:500] nsiooverflow: entry
[14-MAR-2006 14:40:25:500] nsiooverflow: exit (1)
[14-MAR-2006 14:40:25:500] nsclose: entry
[14-MAR-2006 14:40:25:500] nstimarmed: entry
[14-MAR-2006 14:40:25:500] nstimarmed: no timer allocated
[14-MAR-2006 14:40:25:500] nstimarmed: normal exit
[14-MAR-2006 14:40:25:500] nttctl: entry
[14-MAR-2006 14:40:25:500] nttctl: entry
[14-MAR-2006 14:40:25:500] nsdo: entry
[14-MAR-2006 14:40:25:500] nsdo: cid=4, opcode=66, *bl=0, *what=0, uflgs=0x0, cflgs=0x2
[14-MAR-2006 14:40:25:500] nsdo: rank=64, nsctxrnk=0
[14-MAR-2006 14:40:25:500] nsdo: nsctx: state=2, flg=0x4000, mvd=0
[14-MAR-2006 14:40:25:500] nsevunreg: entry
[14-MAR-2006 14:40:25:500] nsevunreg: cid=4, sgt=0, rdm=2
[14-MAR-2006 14:40:25:500] nsrah: entry
[14-MAR-2006 14:40:25:500] nsrah: re-setting transport read mode
[14-MAR-2006 14:40:25:500] nttctl: entry
[14-MAR-2006 14:40:25:500] nttctl: Clearing async mode
[14-MAR-2006 14:40:25:500] nsrah: normal exit
[14-MAR-2006 14:40:25:500] nsevunreg: 3 registered connection(s)
[14-MAR-2006 14:40:25:500] nsevunreg: exit (0)
[14-MAR-2006 14:40:25:500] nsbfr: entry
[14-MAR-2006 14:40:25:500] nsbaddfl: entry
[14-MAR-2006 14:40:25:500] nsbaddfl: normal exit
[14-MAR-2006 14:40:25:500] nsbfr: normal exit
[14-MAR-2006 14:40:25:500] nsbfr: entry
[14-MAR-2006 14:40:25:500] nsbaddfl: entry
[14-MAR-2006 14:40:25:500] nsbaddfl: normal exit
[14-MAR-2006 14:40:25:500] nsbfr: normal exit
[14-MAR-2006 14:40:25:500] nsdo: nsctxrnk=0
[14-MAR-2006 14:40:25:500] nsdo: normal exit
[14-MAR-2006 14:40:25:500] nsiocancel: entry
[14-MAR-2006 14:40:25:500] nsiofrrg: entry
[14-MAR-2006 14:40:25:500] nsbfr: entry
[14-MAR-2006 14:40:25:500] nsbaddfl: entry
[14-MAR-2006 14:40:25:500] nsbaddfl: normal exit
[14-MAR-2006 14:40:25:515] nsbfr: normal exit
[14-MAR-2006 14:40:25:515] nsiofrrg: exit
[14-MAR-2006 14:40:25:515] nsiocancel: exit
[14-MAR-2006 14:40:25:515] nsclose: closing transport
[14-MAR-2006 14:40:25:515] nttdisc: entry
[14-MAR-2006 14:40:25:515] nttdisc: Closed socket 256
[14-MAR-2006 14:40:25:515] nttdisc: exit
[14-MAR-2006 14:40:25:515] nsclose: global context check-out (from slot 4) complete
[14-MAR-2006 14:40:25:515] nsnadisc: entry
[14-MAR-2006 14:40:25:515] nsnadisc: no native services in use - returning
[14-MAR-2006 14:40:25:515] nsopenfree_nsntx: nlhthdel from mplx_ht_nsgbu, ctx=b01858 nsntx=aba008
[14-MAR-2006 14:40:25:515] nsiocancel: entry
[14-MAR-2006 14:40:25:515] nsiofrrg: entry
[14-MAR-2006 14:40:25:515] nsiofrrg: exit
[14-MAR-2006 14:40:25:515] nsiocancel: exit
[14-MAR-2006 14:40:25:515] nsmfr: entry
[14-MAR-2006 14:40:25:515] nsmfr: 1644 bytes at 0xaba008
[14-MAR-2006 14:40:25:515] nsmfr: normal exit
[14-MAR-2006 14:40:25:515] nsmfr: entry
[14-MAR-2006 14:40:25:515] nsmfr: 736 bytes at 0xb01858
[14-MAR-2006 14:40:25:515] nsmfr: normal exit
[14-MAR-2006 14:40:25:515] nsclose: normal exit
[14-MAR-2006 14:40:25:515] nsrefuse: exit (0)
[14-MAR-2006 14:40:25:515] nsgldissolve: entry
[14-MAR-2006 14:40:25:515] nsdisc: entry
[14-MAR-2006 14:40:25:515] nsclose: entry
[14-MAR-2006 14:40:25:515] nsclose: normal exit
[14-MAR-2006 14:40:25:515] nsdisc: exit (0)
[14-MAR-2006 14:40:25:515] nsgldissolve: Deallocating cxd 0xb1bf38.
[14-MAR-2006 14:40:25:515] nsgldissolve: exit
[14-MAR-2006 14:40:25:515] nsglrespond: exit
[14-MAR-2006 14:40:25:515] nsglecmd: exit
[14-MAR-2006 14:40:25:515] nsglhe: exit
[14-MAR-2006 14:40:25:515] nsevwait: entry
[14-MAR-2006 14:40:25:515] nsevwait: 3 registered connection(s)
[14-MAR-2006 14:40:25:515] nsevwait: 0 pre-posted event(s)
[14-MAR-2006 14:40:25:515] nsevwait: waiting for transport event (0 thru 3)...
here is the output of tnsping localhost:
C:\Documents and Settings\Owner>tnsping localhost
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 14-MAR-2
006 15:07:24
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTO
COL=TCP)(HOST=127.0.0.1)(PORT=1521)))
OK (40 msec)
here is the output of lsnrctl:
C:\Documents and Settings\Owner>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 14-MAR-2006 15:08
:28
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 14-MAR-2006 14:39:00
Uptime 0 days 0 hr. 29 min. 27 sec
Trace Level support
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listener Trace File C:\oraclexe\app\oracle\product\10.2.0\server\network\t
race\listener.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\Documents and Settings\Owner>lsnrctl stop
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 14-MAR-2006 15:09
:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
The command completed successfully
C:\Documents and Settings\Owner>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 14-MAR-2006 15:09
:34
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\ad
min\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log
\listener.log
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\networ
k\trace\listener.trc
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR
_XEipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 14-MAR-2006 15:09:38
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level support
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listener Trace File C:\oraclexe\app\oracle\product\10.2.0\server\network\t
race\listener.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
thanks a lot!
tom

thanks for the quick reply.
removed NLS_LANG, SQLPATH and TNS_ADMIN - based on your tip. i had a past install of instant client....
set before install:
C:\Documents and Settings\Owner>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\Owner\Application Data
APR_ICONV_PATH=C:\Program Files\Subversion\iconv
CATALINA_HOME=c:\jakarta-tomcat-5.0.28
CLASSPATH=C:\mysql-connector-java-3.1.11\mysql-connector-java-3.1.11-bin.jar;C:\
isql\classes12.jar;C:\Program Files\Java\j2re1.4.2_09\lib\ext\QTJava.zip
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=LOCALHOST
ComSpec=C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Owner
JAVA_HOME=c:\j2sdk1.4.2_09
JBOSS_CLASSPATH=C:\jboss-portal-2.0-jboss-4.0.2\lib
JBOSS_HOME=C:\jboss-portal-2.0-jboss-4.0.2
LOCAL=PDEV
LOGONSERVER=\\LOCALHOST
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=c:\bzip2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Pyt
hon22;C:\gzip\bin;C:\tar\bin;C:\j2sdk1.4.2_09\bin;C:\apache-ant-1.6.5\bin;C:\Pro
gram Files\MySQL\MySQL Server 4.1\bin;C:\Program Files\Subversion;C:\Program Fil
es\TortoiseCVS;C:\Program Files\QuickTime\QTSystem\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=0209
ProgramFiles=C:\Program Files
PROMPT=$P$G
QTJAVA=C:\Program Files\Java\j2re1.4.2_09\lib\ext\QTJava.zip
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\Owner\LOCALS~1\Temp
TMP=C:\DOCUME~1\Owner\LOCALS~1\Temp
USERDOMAIN=LOCALHOST
USERNAME=Owner
USERPROFILE=C:\Documents and Settings\Owner
windir=C:\WINDOWS
set after install:
C:\Documents and Settings\Owner>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\Owner\Application Data
APR_ICONV_PATH=C:\Program Files\Subversion\iconv
CATALINA_HOME=c:\jakarta-tomcat-5.0.28
CLASSPATH=C:\mysql-connector-java-3.1.11\mysql-connector-java-3.1.11-bin.jar;C:\
isql\classes12.jar;C:\Program Files\Java\j2re1.4.2_09\lib\ext\QTJava.zip
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=LOCALHOST
ComSpec=C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Owner
JAVA_HOME=c:\j2sdk1.4.2_09
JBOSS_CLASSPATH=C:\jboss-portal-2.0-jboss-4.0.2\lib
JBOSS_HOME=C:\jboss-portal-2.0-jboss-4.0.2
LOCAL=PDEV
LOGONSERVER=\\LOCALHOST
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=C:\oraclexe\app\oracle\product\10.2.0\server\bin;c:\bzip2\bin;C:\WINDOWS\sy
stem32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Python22;C:\gzip\bin;C:\tar\bin;C:
\j2sdk1.4.2_09\bin;C:\apache-ant-1.6.5\bin;C:\Program Files\MySQL\MySQL Server 4
.1\bin;C:\Program Files\Subversion;C:\Program Files\TortoiseCVS;C:\Program Files
\QuickTime\QTSystem\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=0209
ProgramFiles=C:\Program Files
PROMPT=$P$G
QTJAVA=C:\Program Files\Java\j2re1.4.2_09\lib\ext\QTJava.zip
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\Owner\LOCALS~1\Temp
TMP=C:\DOCUME~1\Owner\LOCALS~1\Temp
USERDOMAIN=LOCALHOST
USERNAME=Owner
USERPROFILE=C:\Documents and Settings\Owner
windir=C:\WINDOWS
C:\Documents and Settings\Owner>sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Mar 14 17:33:51 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect / as sysdba;
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
SQL> select count(*) from hr.employees;
SP2-0640: Not connected
SQL>
both services OracleTNSListner and OracleServiceXE are started. ...as you said, my .ora files are not right due to the failed install.
anything in the registry from instant client that could be killing our install? the services start and then in the "configuring database" section, it just hangs - no CPU, no disk - must be a network hang.... ...then the install finishes (doesn't say sucess or failure)...
thanks!
tom

Sometimes my home page comes up partially off the page to the left and I can't move it to the center of my computer screen.

When I open my home page it often isn't centered on my screen and I am not able to move it to the right so I can view the entire page at once. It only happens with my home page so it may be a igoogle home page problem and I plan to contact them as well but just thought you may also be able to assist me.

You must have an extension installed which provides that feature to be able to drag the tab bar around, it's not a standard feature in Firefox.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
or <br />
Please provide a screenshot of what you are talking about. <br />
https://support.mozilla.com/en-US/kb/Adding+screenshots

How do I get back my AT&T Yahoo Home Page and Tool Bar?

I am a senior citizen with little computer knowledge. I cannot cope with changes to my home page because I do not have the knowledge/skills to undo the changes your program has installed.
AT&T is my Internet Service Provider. Firefox is my browser. Right? When I installed the newer version of Firefox it usurped my AT&T Yahoo Home Page and Task Bar. I want my old home page and task bar back.
I used system recovery to go back a couple hrs. prior to when the new Fire Fox was installed and lost Firefox & At&T. Was in a great state of frustration when I couldn't get system recovery up after going to control panel. System recovery finally popped up again and I went forward to after installation of new Fire Fox and have system up again.
I am unable to read up on new Fire Fox program now. All I want is my old AT&T Yahoo Home Page back with their Task Bar. I can learn new Fire Fox as time permits.
For a non-profit organization I find Fire Fox quite aggressive. That is good when mobilizing us to write or call Congress but not to take over my Home Page.
Will have to admit new Fire Fox sure is faster.
I do want to commend you for taking a stand against what Congress is trying to do and also for your non-intrusive, not obnoxious way of asking for donations. You help inform us and let us know of your need and anyone that is not a free loader with a conscience, I think, would make a donation according to what one can afford. Keep up the good work and the good fight..........please do help me restore my home page back to AT&T with the old task bar.
I appreciate all the help you can give me. Please excuse this long note.
Blessings, Helen
Added Note: AT&T home page returned. Still need Tool Bar. Troubleshooting information from Firefox help for Tool Bar below. Also info to restore Refresh and Home icon below.

This is the answer from Firefox Help to get Tool Bar back up:
Why are the menus (File, Edit, View, etc.) missing?
If you're using Windows 7 or Windows Vista, you now have an orange Firefox button that takes the most common functions and puts them in one menu.
To temporarily show the old style menus, just press the Alt key.
To have them shown all the time, right-click on an empty section of the Tab Strip and check Menu Bar in the pop-up menu.
Menu Bar - Win
Pressing the Alt key didn't work for me but the latter instruction did the trick.
Check the Navigation Bar too on the pop-up menu if you want your Refresh and Home Icons to show. It took quite a few right-clicks for me before the pop-up menu I needed came up so keep trying until the right menu comes up.

I want name on address bar goes to home page, not search engine

Just today I hooked up a new modem/router that I purchased at a WIndstream store. I have been browsing the internet for years with Firefox. I have changed the keyword.url setting in my Firefox configuration (see https://support.mozilla.com/en-US/questions/833252#answer-197476) so that the new version would act like the old version and go directly to the webpage when the name was typed in the address bar. For example: when I type in "windstream" (no ".net" or".com") I would go directly to windstream' home page.
However, when I hooked up my new modem/router I my browser is hijacked and goes to a Windstream search page. I have tried everything from re-installing Firefox, re-changing the "keyword.url" setting, I even tried the Firefox ad-on here (https://addons.mozilla.org/en-us/firefox/addon/browse-by-name/).
All to no avail......there is something that has changed by adding Windstream's hardware and connecting to their network that will not allow me to use this function of Firefox.
Nothing else changed, but a new piece of hardware.....
Changed keyword.url to : http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=
Re-installed Firefox after cleaning all history and cookies.
Tried the add-on "Browse by name"
Wasted my time calling Windstream tech support.
Changed to openDNS
Tried to disable the feature through Windstream's web page, but then it just happens with the new search engine.

Opt-out of Windstream's search service: Type in something to get their sneaky web search page to come up, then click the tiny link at the bottom right "about this page". That sends you to a page where you can opt-out of their service.
To opt-out from their "valuable" sneaky service, you have to choose to opt-in to another search service.
You have to do this with each browser. And it still sends you to your search engine's results page, not to your URL the way you might want it to.
I would rather the default be to allow me to opt-in if I choose to, not have to jump through hoops to find out how to opt-out. It's taken me weeks to discover this. Annoying!

Adding a home page to a contact

Similar Messages

Maybe you are looking for