Adding a Input language

Hi,
I am looking to add Spanish as a input language, it is not listed on my phone. Is there anywhere I can download it or add it. I have a Curve 8900 on UK O2, I've tried O2 and they were not very helpful.
Regards
Galiceltico

You can install other languages through the BB Desktop Manager if you have it installed on your PC. It'll be an option under your "applications" section.

Similar Messages

Adding additional input languages

Hello,
I am trying to add an additional input language and have done the following so far but input is still English when I switch to Korean.
Control - Panel - Region Language - Change Keyboards or other input methods
Keyboards and Languages tab - Change keyboards - General tab - Add - Korean
When I toggle to Korean on the Language bar and type, it's still in English so I must be missing a step or two.
I am using Windows 7 Pro 64 bit.
Thanks in advance.

Windows 7 language packs are available for computers that are running Windows 7 Ultimate or Windows 7 Enterprise.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Help adding an input language

I'm trying to add Korean on my phone but i am having difficulty!!
I connected my phone to my computer and it said that the device driver didn't get properly installed. WHAT DOES THAT MEAN? (sorry im really bad at this and extremely frustrated)
and then when i open my bb desktop software and click applications.. i don't see the language options at all! i don't understand. i spent like the past few hours trying to figure it out.
I even downloaded the older desktop manager but halfway through trying to install it... it goes fatal error and stops. It did this like 10 times.
please help me!!!! i have no idea what to do

Hello,
if the Support tells you that than you can do it. It wont disturb your existing one.
On Rel.2 you add another Server cia the CCM. On XI 3.1 you do that via the CMC. Check the Admin guide for your version about more Informations.
Regards
-Seb.

Help adding Input language Russian on 8330

I'm on Verizon Curve 4.3.
Can anyone help adding Russian as input language?
Thanks.
Greg.
Solved!
Go to Solution.

Verizon should have a multi launguage package on the website.
If not you can go here:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Make sure you get the same version that is on your phone currently so you ca maintain support.
Let us know when you get it, and well help you load it.
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Adding Arabic Language as input Language

I have always had Arabic as part of my BB Z10 default languages. Recently my phone crashed and i reinstalled the software release 10.1.0.4181 however this time i lost the option to add Arabic as an input language. How can i re add Arabic, can someone please help?
Thanks
T

If you want your OS menus and dialogues to appear in Arabic, go to system preferences/language & text/language and move Arabic to the top of the list and logout/login. If Arabic is not on the list, use the Edit button to add it.
If it is something different that you want, provide more detail.

To add Hebrew as input language in Curve 8520

Hello,
I'm just newly entering the BB world, my first real major issue is adding Hebrew as input language to Curve 8520.
Like to verify that I can read Hebrew on it, dont need to have Hebrew system, but all what i need is to be able to write Hebrew. Have to tell you that all the Multilingual softwares provided on the website for Curve 8520 dosent include Hebrew.
PLEASE help fpr this issue may end the whole BB epxerince for me, my job depends on it!

Hey HusseinBakr,
Welcome to the BlackBerry Support Community Forums.
All language packs for BlackBerry® smartphones are provided to BlackBerry smartphone users by the wireless service provider where the BlackBerry smartphone was purchased.
To add language packs to the BlackBerry® smartphones follow the steps outlined in the following artilce:
How to obtain language packs for BlackBerry smartphones
http://btsc.webapps.blackberry.com/btsc/KB13067
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Input language in Numbers

How can i change the input language from English to Spanish in Numbers?

Hi chab311,
Have you added Spanish in System Preferences>Keyboard>Input Sources?
If you have, check to make sure you have checked the "Show Input menu in menu bar" optoin. Then you should be able to toggle through input languages in the menu bar on top and choose whatever language you want to input. Mine looks like this:
SG

How to download and install Georgian Qwerty to Input Languages list on Snow Leopard?

I'm using a mac with Snow Leopard and would like to add Georgian Qwerty as an input language. Unfortunately, it does not show up pre-installed in the list of languages that can be added as an input source. Is there a way to download and install it? Thanks in advance!

Try
http://www.freshblurbs.com/articles/georgian-keyboard-layout-mac-os-x

E72 - add input language

Hello!
I just got myself a brand new E72 and am quite happy with it. The only problem so far - but a very serious one for me! - is that I cannot type in Bulgarian. Right now I have English, French, German, Dutch and Romanian input languages.
Is there a way to have Bulgarian added?
Thank you all for your help!

bobi1024 wrote:
I've send an e-mail to my local Nokia Care Point Center and they've answered that is impossible to add Bulgarian input languag to my Nokia E72.
In the world of software nothing is impossible I believe so what do they know after all
Not absolutely everything is possible using software ! What they mean is they don't have a Bulgarian language that they can add to the phone and have no plans to either
E71-1(241.04) RM-346 300.21.012

Can't switch input language

Hi.
I recently upgraded to windows 8 (after all updates now it is 8.1).
Up until yesterday I only used it with one user account.
Yesterday I added another account, and for some reason instead of having both input languages It only had English.
I added the second language successfully and the language bar appeared as expected.
However, after a restart the language bar disappeared, as well as the ability to use "alt-shift" to switch languages.
When I look at the settings the both languages are there, and the "Use language bar when possible (or something to that effect)" is checked. Also, the language bar is set to be docked (I tried float - didn't do any good) and the shortcut is set
for "Alt Shift". But, no language bar is shown and the input language can not be changes.
A weird thing is that when I look at the shortcuts list I have "switch language --> Alt-Shift", "Hebrew --> (none)". No entry for English.
Just to make it clear - in order to write this question in English I had to use my other account.
Thank you very much,
Asaf.

Hi,
Please run “ctfmon.exe”, does the language appear again?
And follow the instruction below to force the exe to run each time you start windows.
Open registry, locate to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run.
Create a new string value,
specify the name "CTFMon".
Type “ctfmon”=”CTFMON.EXE” in Value data field, OK.
Restart your computer.
Regards,
Yolanda
Yolanda
TechNet Community Support

How to get current language bar setting for input language

I am using Flex Builder 3, IE 7 and windows OS. Is there a
way to determine the current input language as set in the "language
bar"? The Capabilities class always returns "en" even after I set
Chinese ("ch") as my input language.

Hi Dragon Cao,
No need to create any customer exit variable for this ..
You have standard variable CMONTH this displays current month summation. Just restrict your Key figure with this variable.
And in properities of Key figure goto Calculations> Local Calculations> select Summation.
If you want to assign some calday at run time sure you need to create customer exit variable using Step_2 value in enhancements(CMOD).
Regards,
Rajeswari.
Edited by: mrajeswari on Aug 24, 2011 12:35 PM

Is there a way to permanently change the input language in the login screen?

Whenever I start my iMac with Mavericks, after the boot is complete and the login window appears, I have the change the language in the top right corner from US to DE, else I can't type in my password. Mavericks does not remember this setting, next time after startup I have to do it again. The original owner of this Mac was using US as input language, so I guess that's where it's coming from. This extra step of changign language only takes a few seconds, but many times I forget it and try to enter my password but it will not work. There must be a console command or somethign that can fix this? Thank you!

I managed to find the solution myself. If anyone is interested, just follow those steps here:
http://apple.stackexchange.com/questions/44913/make-a-custom-keyboard-layout-the -system-default-even-for-the-login-screen
(terminal skills required tho)

How to change the input language ?

Hello,
I am writing an Add-on that needs to change the input language when the user
clicks on the Item Code field ("5") in the "Item Master Data" form.
I can perform the change when I am out side of the SAP application (for example if I create a Windows Form), however I cannot control the input language of the SAP itself through code.
I even tried using Application.Sendkeys, however I was unable to send a combination of ALT+SHIFT, or at least it did not have any affect
Here is the code on how to change the input language on a Windows Form:
For Each Lng As system.Windows.Forms.InputLanguage In system.Windows.Forms.InputLanguage.InstalledInputLanguages
   sValue = Lng.Culture.DisplayName.ToUpper()
   If sValue.StartsWith("ENGLISH") Then
                    system.Windows.Forms.InputLanguage.CurrentInputLanguage = Lng
                    Exit For
    End If
Next
Any ideas ?

I am not sure I understand the problem. Anyway in B1 you change the language by
changing it from the Administration module. This raises a Application event that
is sent to all the add-ons. The event is aet_LanguageChanged and you should
then change the language handled by your add-on when you receive it.

How to change System Key Board Default input language(registry entry) using c# code

Hi All
Please help me to write a small console application which helps to change keyBoard default input language in registry using c# code (Manually we can change as follows: Control Panel\All Control Panel Items\Region and Language\ KeyBoards and languages\Change
KeyBoards\Default Input Language)
Note: once system rebooted, English language should not be selected by default. Previously selected language has to be retained after system rebooting

Hi
Avatar
Would you mind letting us know the result of the suggestion?
I temporarily mark
cedric’s last response as an answer. You can unmark
it if they provide no help.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Issue with Full Screen & Input languages (Mavericks 10.9.1)

I have two issues with the latest (Version 8.0.24308) Microsoft Remote Desktop from the Mac App store:
1. If I tick the connection entry "Start session in fullscreen" option, after connect the desktop slips upwards like on the screenshot (below on the link)
2. The default input method switches to Latvian after connect (never used Latvian anywhere...).
On my Mac:
- System language: Hungarian
- Input language: Hungarian
On the server:
- System language: English
- Input language: Hungarian (default) + English
+: the app doesn't supports Retina display resolution :(
Screen Shot link:
db.tt/yYKN0arM

Hi,
1. The version 8.0.24308 offers updated functionality for full screen mode to users of OS X 10.7+:
OS X native: The native full screen feature for the Mac OS X version.
Custom: The custom full screen mode enables the multi-monitor feature in order to provide a better experience for users of Mac OS X versions 10.7 and 10.8.
Important information for users of 10.9: if you have disabled "Displays have separate Spaces" in Mavericks
(System Preferences > Mission Control) go to Preferences > Resolution in the Microsoft Remote Desktop client and configure the setting using the same option.
Please try the OS X native mode and see how it works.
2. The OS keyboard locale, is suggested to the remote PC. Therefore, please check the keyboard locale.
Hope this helps.
Jeremy Wu
TechNet Community Support

Adding a Input language

Similar Messages

Maybe you are looking for