Adding a keyword to several images in A2 - not working

I imported new RAW files into A 2 today for the first time.
I then started my normal routine of adding some of keywords to all of the images at once.
I did a select all, dragged over "Wildlife Refuge", but it was only applied to that one image instead of all of them.
In A 1 I did the exact same thing and the keyword was applied to all I selected.
Checked the manual and I do not see what I am doing wrong.
I would have thought it would still work the same way, but that is OK.
What am I missing? Something simple I am sure!
Thanks!
Charles

check to make sure primary only isn't checked under edit menu ...
icon is also the one on right side with '1' inside the rectangle ...

Similar Messages

  • Since I refreshed Firefox 36.0.4, "Save page as" and "save image as" are not working (even in Safe mode)

    I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
    In Safe Mode, same problem.
    I serached past forum discussions and found several occurrences, but no convincing response.

    ''afew2 [[#question-1054433|said]]''
    <blockquote>
    I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
    In Safe Mode, same problem.
    I serached past forum discussions and found several occurrences, but no convincing response.
    </blockquote>
    I tried troubleshooting plugins, none appeared to be causing the problem.
    I installed 36.0.1, but no difference. Went back to 36.0.4, still no change.
    I ran a malware check with Malwarebytes, no change.
    A past thread here suggested deleting localstore.rdf, which I tried, no result.
    People have had this problem in the past. No one has any idea of how to fix it?

  • After upgrading to Lion Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    After upgrading to Lion, Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
    Didn't used to be this way before Lion/10.7.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Image drag drop not working in scaffholding. Does it require soem setting?

    image drag drop not working in scaffholding. Does it require soem setting?

    Hello Manoj,
    The scaffolding teamplate which you use to create scaffolding page is actually a design prototype which helps you to create similar types of pages instances very quickly without authoring each page separately (for example news, aticle types of pages) and that is the concept of scaffolding only.
    For example - When you go to location http://localhost:4502/miscadmin#/etc/scaffolding/geometrixx you will see a "News" page which is an example of scaffolding (this is a similar page which you can create using scaffolding template).
    Now if you open this page you will be accessing http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html and here you will see already design page.
         1. if you access page properties from side kick you will see how this page is configured using target template and target path
         2. if you go to design mode using side kick you will see how the component has been design (which is similar to what appears on page when you came first time)
         3. Now come back to normal view of that page (http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) and author this page with some dummy property and click on "create" button. I know here you can not author the image as it comes as disabled empty box.
         4. once you author the content and click on create button it will create an instance of scaffolding page on the same page you can see the link on the top of same page.
         5. Now access that page, when you access that page the page will take reference of target template you configured using pare preoperties to display the page.
         6. On this page you will see the same component you configured and when you will edit it you can author the image from there directly.
    Now question is why to configure same component two times half data from scaffolding and half data from page but answer is the design is correct because the page design which you have created (for example http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) is just proto type to create actual page instances and prototype can not holds values for page instance (specially image until it doesnt configured correctly for page instance in this case) which exist only when you create pages using the scaffolding page prototype. Otherwise you have to do more customization by extending scaffolding "/libs/wcm/scaffolding" changing the code and design OR you have to design it according to your target page strtucture which you have configured in page properties (specially image node).
    If you want to create your own page prototype using scaffolding template and want image to associate just copy paste "/etc/scaffolding/geometrixx/news/jcr:content/dialog/items/items/tab2" node to your newly created scaffolding page prototype.
    for more information on scaffolding just refer -http://dev.day.com/docs/en/cq/current/wcm/scaffolding.html
    I hope it clarifies your question and help you to proceed. Let me know if you need more information or help.
    Thanks,
    Pawan

  • Adding/Deleting keywords for multiple images

    Well, I'm finally paying the price for bad keyword management and I'm trying to clean up my nightmare of a system now but running into trouble.
    I'm using Lightroom 3.2.
    My workflow follows one of two types:
    1) I'm shooting something specific (soccer games) and I import the shots and immediately assign the appropriate keywords (soccer, which kid it is, which tournament it is)
    2) I've taken shots of multiple events/subjects and I haven't had time to download and organize.  I will then import with a 'file later' tag so I can easily search and keyword them later and then re-use the card.
    Well 'file later' is now about 3000 images!  Doh!
    I'm going through and properly assigning them but I'm having a lot of trouble with what I *think* should work in Lightroom.
    There are several things here:
    First, if I choose the 'File Later' keyword, it will pull up the metadata filters options on the top of the grid view.  No matter what I do, I can't make it go away.  If I do get it to go away, I wind up viewing ALL my pictures which is not what I want.
    Second, if I choose multiple pictures by ctrl-clicking or shift-clicking, It appears I can assign a keyword to multiple shots.  I cannot REMOVE a keyword from multiple shots. Lightroom seems to only want to remove the keyword from one picture at a time even if they are all selected.
    Third, the painter tool does not work...at all.  Enabling it and then selecting and applying or removing does nothing.
    So, what am I looking for here? 
    Organizing for these should be pretty easy since most are in blocks and I can apply the same keywords quickly.  However, removing the keywords one at a time is a huge pain. 
    What am I doing wrong?
    Thanks

    First, if I choose the 'File Later' keyword, it will pull up the metadata filters options on the top of the grid view.  No matter what I do, I can't make it go away.  If I do get it to go away, I wind up viewing ALL my pictures which is not what I want.
    This is the filter dialog - of course if you close it you turn back to All Photographs. Try creating a Smart Collection based on your File Later keyword - this collection will automatically populate all your images that have that particular keyword. Once you have keyworded the pictures from e.g. one particular shot, just remove the File Later-KW and those images will disappear from the collection.
    Second, if I choose multiple pictures by ctrl-clicking or shift-clicking, It appears I can assign a keyword to multiple shots.  I cannot REMOVE a keyword from multiple shots. Lightroom seems to only want to remove the keyword from one picture at a time even if they are all selected.
    I'm not sure why you can't remove keywords from multiple images - it just works fine here by selecting multiple images and delete the keyword.
    Most of the times I use the Keyword List to assign/delete keywords because in my opinion it is the easiest way - I just browse thru my list or filter for a particular kw and tick the box on the left.
    Creating a hierarchical keyword list can further simplify your work. For example the location: organize the final keyword xyz-Soccer Stadium into other keywords like Town>County>State>Country>Continent>Places, then you only have to tick the last keyword xyz-Soccer Stadium and with that assign all of those keywords in the hierarchy (I know thats kind of a complicated explanation...but I suggest you play around a bit and then you will get the full picture ).

  • Adding same keywords to multiple images

    How can I add keywords, or change keywords, to multiple selected images at the same time instead of having to do it one at a time? Or can I?  I know how to change or add to metadata on multiple images, but it won't retain the keywording changes on all the images.

    Be sure you are selecting multiple images in the GRID mode in the Library panel not the FILMSTRIP mode.  Then if you add a keyword to multiple images it will actually stick.  You can also delete keywords from those selected images.
    Jeff

  • ADD FILES FOR UPLOAD - IMAGE PATHS DO NOT WORK IN WIDGETS

    Hi There
    I'm trying to add my own images to a widget I bought from Qooqee - the Wrapper_v2 image slider. But when I try to add my own images with the image path it doesn't work. I've tried adding the image with 'Add Files for Upload' - and then using the full path which I get from right clicking on it in the assets panel - but it still doesn't work.
    Most of the widgets require you to either specify the image path, or an external URL. I do not want to use a third party image hosting site to get URL's for every image I want to use on the site - so I just need to know what I'm doing wrong with the Add files for Upload - why do my file paths not work in the widgets?

    Provide the name of the program you are using so a Moderator may move this message to the correct program forum
    This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???
    Also, you need to ask for help from the widget maker

  • Resizing image using CSS - not working in IE

    Hello,
    I have a standard report with couple of columns one of which a image column. The images are of varying sizes and I manged to resize them to a fixed width & height by using CSS code in page header as below:
    td[headers="ITEM_PICTURE"] img {
      display: block;
      width: 70px;
      border: 1px solid #999;
      padding: 4px;
      background: #f6f6f6;
    }The CSS does the trick in Chrome & Firefox but does not work in internet explorer. Is there a way to make this CSS code IE friendly?
    Cheers for help.

    William Wallace wrote:
    I am using Apex 4.2.1 (had this issue in 4.1.1 as well) and using theme 10.Ah, the Sludge Sand theme. In 4.x that's a legacy theme only really included to allow applications to run on IE6. It's therefore intended to run in quirks mode, meaning in Internet Explorer terms there's no support for anything that didn't work in IE6 (for certain values of "work"). This means no CSS3, no support for a lot of useful CSS2.1 stuff (like attribute selectors), and probably problems with jQuery which requires standards mode. Adding a DOCTYPE to the page templates to trigger standards mode Interactive Report: how can I display carriage returns?. In 4.2 you really should switch to one of the latest Standard themes, or at least one of the standards mode Legacy themes (those not marked with a "*").
    If you must use theme 10, and there are no other images in this report (like edit icons) then you could add a static ID to the region and use a more basic selector like:
    #static-id td.t10data img {
      display: block;
      width: 70px;
      border: 1px solid #999;
      padding: 4px;
      background: #f6f6f6;
    }However, it appears that one of IE's quirkier quirks mode quirks is that CSS padding is not supported on images, so the presentation you want is not possible using theme 10 in IE and CSS alone.
    Switching to a modern theme is recommended.
    Edited by: fac586 on 02-Mar-2013 10:31

  • Spry Image Slideshow does not work in Explorer

    My spry image slideshow works fine in Safari and Firefox, but does not work in Explorer.
    A small box shows up in IE 8, and absolutely nothing shows up in IE 7.
    www.epaaudio.com
    Any Suggestions?

    How did you get your slideshow to play in Internet Explorer? I'm using the same slideshow on my new website and it plays fine in everything but IE versions. Here's a test page I'm working on... http://4034.sandbox.i3dthemes.net/oceankayakbanzai.html
    I looked at the code for your page and didn't notice anything different on mine. But yours works... Let me know if you have any suggestions. Thanks!

  • Several laptop keyboard keys not working

    Dear all,
    I hope you can help me. Several keys on my HP Spectre 13-3000ea ultrabook occassionally don't work. More specifically, the n,m,h,j,y,u,6,7 keys (if you check your keyboard you see they constitute a vertical area of keys) do not work, most often when the laptop boots from cold or resumes from sleep. I can get them to work by rapidly hitting other keys in the neighbourhood and swiping my finger across these keys. All of the sudden they 'wake up' again and they will work. Sometimes, randomly, they will stop functioning again and the problem appears to become worse.
    It is not a software related problem which support seems keen on, since I experience exactly the same problem in Ubuntu Linux and also in the BIOS. I have the feeling it is related to the connector ribbon but I'm having a bit of a difficult time convincing HP Support of this, especially because the occurrences seem random. If you have any ideas on how to solve this problem, please let me know.
    Edit: I forgot to mention I never spilled anything over my keyboard and I used a keyboard brush to clean under the keys as well as I could, since the keys are not removable.
    Thanks in advance

    Hello 
    Test the keyboard using UEFI diagnostics. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03467259&cc=us&dlc=en&lc=en#N341
     If the keyboard test fails, contact HP Support at 1-800-474-6836 and them know the test failed. 
    While I am an HP employee I am speaking for myself.

  • Copy Settings to multiple images - STILL A NOT WORKING AFTER MANY VERSIONS!

    I have reported the problem of pasting settings to multiple images for many versions and this simple bug is STILL present in LR4!
    In develop module, make changes to an image, click Copy button, select settings to copy.
    Now, select a range or a number of images to which you want to paste the settings, click Paste button.  Guess what?  Only the first image gets the settings!
    This functionality should work and is even documented in the manual.  There are other ways of copying settings but I can never remember how to do this.
    Am I doing something wrong or is this a genuine bug that only seems to affect a few people (I did a web search for V3), or do people just not use this function?
    Please developers, fix this bug if it really is a bug!

    Thanks Dorin for the information.
    I guess I am just frustrated that the program does not work the way it is documented.  There are two very prominent buttons, Copy & Paste and they don't work as documented or as you would expect them to.
    With sync you have to navigate menus to do what one click of the mouse should accomplish.  All I want is some acknowledgement from Adobe that this is a bug and for it to be adressed.  As a long-time IT person I know this would be VERY easy to fix.  If it cannot be fixed then update the documentation.
    Oh well, enough said.  I still love LR!!!

  • Holding SHIFT to resize image in PROPORTION not working - InDesign CC

    Hello,
    I am putting a portfolio together containing a ton of images.
    I constantly use the SHIFT to resize images in proportion constantly, but it is not work.  It resizes randomly wherever my curser goes.
    It works in Photoshop CC and Illustrator CC
    I have uninstalled InDesign (uninstalled preferences too), then re-installed with no result.
    Using the Scale tool (by pressing S) still does not work
    I have been using the manual SCALE with percentages or using the "fit content proportionally" buttons on the toolbar, which is killing my workflow, as I need fine grain control
    I may have typed something out while thinking I was in a text box, when I was not.  This may have turned on or turned off the feature.  I'm not sure how to bring it back now.
    Any help would be appreciated
    Casey

    Which tool are you using, and which platform?
    I use the selection tool, myself, and for that you need to press BOTH Ctrl (PC)/Cmd (Mac) and Shift before dragging to scale proportionally. On windows you must press the keys before clicking the mouse.
    How did you replace the preferences? Directions to do it properly are at Replace Your Preferences

  • Paste Clipboard Image as Stamp not working

    The Paste Clipboard Image as Stamp Tool does not work - it is greyed out after copying an image. I'm currently running Acrobat Pro 10.1.4 on OSX 10.8, but the problem has also existed in earlier versions of Acrobat Pro and OSX.
    I've reported the bug to Adobe more than once, but it's never been fixed. There are a couple of reports of the problem in the forums, but no solutions. I'm posting again in hopes that Adobe sees in and responds, or that someone has found a solution, work around or alternative method of pasting images.
    Thanks.

    The clipboard in Acrobat seems to work differently that one might expect, at least that is my experience on Win systems. You might try to print the image to a PDF and then select the image in the new PDF and see if that is available for the copy. I just tried both the copy and paste and the and the create stamp from clipboard in AA8 and it worked fine, even from the Windows clipboard. Is the stamp tool greyed out all together, or just the copy from clipboard option? Are you sure there is an image in the clipboard (easy to forget at times)?

  • Can not sync ipod shuffle says : The Ipod SYS  cannot be used with itunes  because it is not formatted properly. But i have restore it several times and still not working

    Hi, I'm trying to sync my new Ipod to get the new album I got but when I connected it the meesage: The Ipod SYS  cannot be used with itunes  because it is not formatted properly. appears in itunes. I have restored several times now but it is not working I already downloaded music to it, it is brand new..just 2 weeks old. Somebody can help me? Do I need to return it to the store I bought it from?

    The last Restore completed without any error message, or do you get the "ipod SYS" error message?
    I'm thinking this is a case of iTunes and Windows confusing the iPod's storage disk with another drive, described here
    http://support.apple.com/kb/ts1493
    So, iTunes/Windows thinks another drive is the iPod, and errors out because that drive is not formatted as expected (for an iPod).  The solution, in the document linked above, is to change the iPod's assigned drive letter.

  • 'Add image to Photo' not working from Safari

    Issue: Go to any website.  See a cool pic.  Right-click, and select 'Add image to Photo'. Nothing happens.
    Does not work on iMac, Safari, Firefox both have the same issue.

    I deleted the iPhoto app (kept new Photos)  and restarted computer. It is now working like a breeze.
    MacBook Pro (Retina, 15-inch, Mid 2014), OS X Yosemite 10.10.3

Maybe you are looking for