Adding a logo to every slide in my presentation in Keynote '09

I can't seem to figure out how to add a logo to each slide automatically something like a slide number is added automatically when the proper selections are set. The item I would like on each slide is a four letter logo on the lower left corner of each slide.

Are you putting your logo directly on to the slide, or are you putting it on the MASTER SLIDES? On the left side of the display (below New, Play and perhaps Skip) you should have 2 stacked, vertical columns titled Master Slides and Slides. If you only see Slides, then grab the handle to the right of the title and drag it down to find your Master Slides. Open each of the masters and copy and paste your logo on to them. Now it will appear on every slide.

Similar Messages

Adding "home" button to every slide

I have a 50+ slide Captivate document and I'd like to add a
"home" button on every slide without having to paste it into every
one. Any way to do this? Is there a master slide or something I can
add it to and have it appear on all?
Thanks!

Hi wfz and welcome to our community!
Unfortunately you don't have a lot of choice in placement of
these beasties. So you either use what you have or develop a
workaround. I'm thinking you will perhaps need to insert a button
object on each slide that is labeled "Home" and points to the
appropriate slide.
You should also consider submitting a WishForm asking the
developers to provide us more flexibility in placing the existing
menu. You may do this by
clicking
here and completing the forum you should find there.
Cheers... Rick

In captivate 8, how do you insert a company logo so that it appears on every slide?

in captivate 8, how do you insert a company logo so that it appears on every slide?

Put it on the main master slide and check the daughter master slides. Which theme do you use? Not all daughter master slides have automatically the main master objects, that is why I'm asking about the theme.

How do you make an image or text, appear on every slide?

How do you make an image appear on every slide?

What part did you not understand?
As Andrew said, open the Keynote file, go to the View Menu>Show Master Slides
This is what you should see on the left hand slide of the window. The Master slides are at the top and the check mark goes by the Master Slide that is referenced on which ever slide you have selected in the Slides pane.
Add to the Master slide the image or text that you would like to see on the slides that are made off of that master. You can see in the Title & Bullets master slide, I added the shape in the lower left hand corner and it was added to all the slides build off that master.
If this still isn't clear, let us know where you are getting stuck and we will try to help.

I am trying to link slides, a specific slides to specific lines. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10

I am trying to link slides, a specific slide to a specific slide. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10; any ideas why? Thanks

create a shape on the slide e.g. a circle
right click the shape and select Add Link
make sure you select a specific slide number (don't select first previous or next)

Is there a way to add a transition to every slide at once in Keynote for Ipad2

Is there a way to add a transition to every slide in Keynote on my IPAD 2? I've been doing each slide individually and it is taking too long!
thanks,

I solved the problem a couple days ago. The mistake I made was that I neglected to shut Firefox down before making the changes to persdict.dat. Once I did that, everything worked as I expected it to work after bringing Firefox up again. I guess that's the equivalent of what you suggested. Thanks for your response.

Why apple is not adding tweaks like activator,volume slider in multitasking bar and a blacklist app

Why apple is not adding tweaks like activator,volume slider in multitasking bar and a blacklist app?

But quantity is not everything.
Funny, because Windows proponents and users touted the quantity of apps available with that swiss cheese for security OS being "everything" or a big plus, but now say it isn't everything with iOS. Can't have it both ways.
At present there are about SIX blacklist apps in the OFFICIAL Apple Store which I can buy for MONEY but have NO USE AT ALL because of the APIs restrictions.
3rd party apps don't have access to private iPhone APIs for security reasons. Andrioid is following the same path as Windows. Their so called "open" OS is a swiss cheese for security mobile OS.
If this isn't acceptable to you or having an option to block unwanted calls provided by the iPhone's OS is a very important want or need, stick with an Android or Symbian device that includes the option.

Classic: will not recharge; apple logo flashes every few seconds then fades away; have tried the 'reboot' advice i.e. move hold switch on and off, hold menu and center button, no success. have tried this many times and kept connected for several hours.

I have a classic, several years old.
It will not recharge; the Apple logo flashes every few seconds then disappears.
I have tried the 'reboot' advice i.e. move the Hold switch on and off, hold the Menu and Center buttons, no success.
I have tried this many times and kept the ipod connected for several hours. And I have tried two different cords, one connected to the desktop computer, one connected to electrical outlet.

Hi enbridge4,
If your iPod Classic won't charge or turn on, you may find the following articles helpful:
Apple Support: iPod won't turn on
http://support.apple.com/kb/ts1383
Apple Support: iPod's battery doesn't charge
http://support.apple.com/kb/ta44551
Regards,
- Brenden

Adding variables to match question slides

Hi All,
I am using Captivate 7 and need your help/idea/expertise on this. I am trying the following:
Adding a drag and drop slide wherein I should be able to drop the source to any target.
If the drop happens on the correct option (this is the challenge, how can I define the correct answer!), a message should flash saying "You are right"
If even a single drop goes wrong, then I the right answers should flash, (this I can create a new slide though)
But to set such conditions what should I exactly do? Please help.
Thanks,
Roja

The title of your question is bit confusing. Why should you have to add variables to match question slides?
The content of your question is totally different: each D&D slide can act as a question slide. It doesn't really have all the features of a question slide but most of them: Reporting, Score (only black/white, not partial score/penalty), Attempts, Actions On Success/Failure. When it is configured as a question its score will be reset when the user 'Retakes' a quiz with multiple attempts on quiz level etc. Progress quiz indicator will not be included however. And defining the correct answers is a breeze with the wizard or with the button Correct Answers.
The best part about D&D are IMO the 'Object actions': you can specify an advanced action for each drag&drop act and that is what you need. Do not use a simple action, because it will release the play head. That action can show a feedback text/object that was previously hidden, it can apply an effect to an object like flashing, etc. This blog post was written for CP8, but can help maybe:
Drag&Drop tips - Captivate blog

On a Keynote presentation, every slide begins with a Name. Can I sort the slides on this name ?

I am using Keynote. Each slide begins with a name of a contact and the data on the slide is all about this individual. Over time, this presentation will keep growing and possibly reach a few hundred slides.
To help with organizing, is there a way to sort the name (or Header field) of every slide so that my presentation is always sorted based on the name on each page?
Apprecaite your help.

Hello,
not as far as i know, however, if it helps, you can organize the slides into subsections: locate the slide that is to be the beginning of a section and drag the one(s) immediately below slightly to the right.
now you can easily move around the sections and sort them the way you want them to be without dragging individual slides...
You can even close a section by clicking on the small triangle next to the slide that is the "section head".
I hope this helps.
Ricc

Apple logo blinking every 3 seconds - nothing to do with iphone

Hi all!
I was using my iPhone, with its battery more than 70%, but suddently it tuned off by itself. I tried restarting though on/off button and home button, but it didn't start. I tried recharging and it didn't work as well. When I tried to connect to iTunes, the phone was not detected as usual. Then, the screen only showed the apple logo blinking every 3 seconds. I also tried updating my itunes, yet it still had no effect. Any other advice how to solve this problem? Thanks.

Force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
If that doesn't work, make an appointment at any Apple store.

Basic tutorial shows adding a logo to lighthouse picture is easy, File + Place. I don't have "Place" in my dropdown. I only have "Place Embeded" and "Place Linked". What am I doing wrong?

Basic tutorial shows adding a logo to lighthouse picture is easy, File + Place. I don't have "Place" in my dropdown. I only have "Place Embeded" and "Place Linked". What am I doing wrong?

You are not doing anything wrong. The January 2014 update of Photoshop CC added the option to embed OR link Smart Objects. Until this Photoshop CC update, Smart Objects were always embedded in the Photoshop document. Although it made the file size larger, it was like a built-in backup plan because any placed files were included in the document. Now you have the option of embedding or linking the Smart Object. Linking references the file rather than actually copying it to your current file. In terms of your small tutorial, choose Embed.

CP 7 preference "send data on every slide".

Does anyone know the implications of selecting this option in the advanced settings of CP7?

"Is it OK that I left the "Template" field at "Default" and that I didn't select "Send Data On Every Slide"?"
If it works for you, then it's fine. If you were having troubles with proper reporting, then changing to 'send data at end' is an alternative.
"What is "Set exit to normal after completion" supposed to do?"
It's supposed to do exactly what you're expecting.
If a user exits a lesson that is set to resume (don't check 'Never Send Resume Data') and they have NOT passed or completed the lesson...then exit should be set to 'suspend' and the LMS should launch the lesson in 'resume' mode...so it picks up where the user exited.
If a user exits a lesson set to resume and they HAVE passed or completed the lesson, then exit should be set to 'normal' and the LMS should launch the lesson in 'review' mode - without any resume data sent back (so it should start from the beginning).
If you do NOT have 'Set Exit to Normal' checked, then I assume the cmi.exit value is always 'suspend', which means the LMS should always relaunch your lesson with resume/bookmarked data...
...unless...If you have 'Never Send Resume Data' checked, then it doesn't matter if you have 'Set Exit to Normal' checked, as the lesson will never resume...as the LMS has no suspended/resume data to send back to the lesson when its relaunched.
SO what you're expecting should happen...with 'Never send resume data' NOT checked and 'Set exit to normal' checked, your lesson should start over if its passed/completed.
If it's not, then Cornerstone is not behaving properly, per the SCORM spec.

Can't link to slides in other presentations

We build links to slides within other presentations, for
example:
Presentation A will have a link to slide 4 in Presentation B.
The code for this used to be:
http://www.place.com/breeze/presentationB/index.html
[#slide4], and then
http://www.place.com/adobe/presentationB/index.html
[?slide4]
Neither of these pieces of code is working anymore - is there
something new to try? When I use the [?slide4], it will pop open
the presentation, but always to slide 1, never to the slide
specified. Help!

Let's say you have a project that is located in the directory c:\Source\Project directory. Inside the project you have two folders called (FolderA and FolderB) with topic1 and topic2 in folder A and topic3 and topic4 in folder B. If you link from topic1 to topic 3, the link path added by RH is "foldera/topic3.htm". This is a relative path to a topic inside the project. If the project folder is moved, the link will still work provided none of the overall project folder/file structure is changed.
The generated output - although it is by default output to the !SSL!\Webhelp folder - is not inside the project. You can link to it but if it or the project source files are moved, it run the risk of broken links. If all you are doing is trying to link to another topic in the same help project, use the approcah I have outlined above.
Read the RoboColum(n) for mutterings on RoboHelp, Technical Communication Suite and technical communication.

How do I keep the same size slide when copying/pasting in Keynote??

I have several presentations in Keynote. But when I copy from one, and paste into another, The slde is now shorter, and not as long. as I try to "stretch" it out, it becomes higher also at the same time, and I loose part of my slide.... Any help would be much appreciated...

Try and activate either track # column, or album column header.
In this example I've sorted my album by year:
http://img367.imageshack.us/img367/701/sortbyyearyo8.jpg

Adding a logo to every slide in my presentation in Keynote '09

Similar Messages

Maybe you are looking for