Adding a LOOK in SG breaks Primary Grade

I'm using SG with the Directlink from PP. I can grade in SG and return to PP. I can add Secondary grades and Cutom Looks with no problem. If I try to add a LOOK as a secondary or extra Primary it breaks my original Primary Grade. If I delete the new LOOK or don't accept the Preview, I still can't get back to the Grade I had already saved. I have to go back to the ungraded clip. Example - Bring in Canon Log clip directly from Premiere Pro. Adjust Offset, Gain and Highlights to where I want it. Add secondary to skin tone. Add Secondary to background. Good to go and it will return to PP as graded. But if I try to add a LOOK in SG after the Primary and Secondary it just breaks. No revovery. No undo. No delete. Just the original pre-graded clip. Any ideas or is this a Bug?

Hi,
The new look will delete all you layers and then apply the new Look, it's better if you apply looks on adjusment layers.
But if you don't accept it, it should get back to the point where it was. Is that your case? Even if you accept the Look, Undo Action should bring back your grading.
Thanks,
Fran

Similar Messages

Color "Forgets" primary grades

I am grading 1 min TV commercials. I go along the timeline, grading each shot with primaries.
After I had finished the timeline, saved and quit, I re-opened the project a bit later and primaries on several of the clips had disappeared. There was no particular order or pattern as to which clips loose their primary grade, it's just random.
This problem has happened with several different projects, too. It's not just a one off thing.
Has anyone else had this problem? Does anyone have a solution?

Had the problem? No. I have had COLOR swap grades among clips, but not completely disappear.
jPo

Adding Subforms on Click + Page Breaks Problem

Hi all,
i made a form containing a few Sub forms and Text Fields which grow by the Number of Lines the User writes.
However, I made one button to add a sub form containing 5 of these text fields
and it works fine but when it comes to the end of the page and I click on the button again, it doesn't break to the next page, the new sub form is simply added below the last, half cut by the end of the first page...
So my Question is how do I add a page break after the page is either full or a certain number of those sub forms exist?
Kind Regards

I have a similar problem. I have 2 subforms side by side that have independent columns of data. Either one of these subforms may expand onto a second page. I am stumped on how to keep the positioning correct (IE: If the content area flows western style it looks correct on page 1, but if I flow to page 2 the second column ends up on page 2. But if I position the two columns, then page break doesn't work).
For a single row of data you need to make sure your positioned fields are in a subform that is inside a flowed subform that allows page breaks and adjusts to fit.

Added logos look pixelated and how to add a watermark?

Hey guys,
I'm having a bit of trouble. i'm trying to add a watermark with one half of the logo covering the footage and the other half the black bar. Because I need to crop the video the logo (ofcourse) gets cut in half. When I try importing the entire file as a .MOV file and then add the logo I have alot of loss in quality. Trying it in After Effects didn't help either.
Also, adding the logos and text in Premiere as a .PNG file looks pixelated even though the file is of a very high resolution. How can I fix this/

Jim,
Picture this...
You have 16:9 footage with really good stuff at the extreme right and the extreme left. SO you want to keep it that way. You also have 4:3 that you don't want to scale up. SO you use a 4:3 project. Now you have two choices. You can crop all of the 4:3 footage, or, when you get all done editing with both 16:9 and 4:3 you export the entire mixed clip as a 4:3 clip. Import that into Premiere Pro and crop the entire clip to look letterboxed. Now add a logo that happens to sit near the bottom right and some of it is over video, and some is over black letterbox.
Only none of this is relevant other than to explain that he has a problem with his logo in that it looks pixelated.
Solve the pixelation and the other explanation is not relevant.

Capturing issues looking for timecode break

I am using FCP 4.5 and capturing onto a G raid Sata drive. But the capture process is very fragmented it keeps taking in about 20 seperate clips per 40 min role of DV. The message that comes up in the capture window says it is searching for timecode break but there is not one on the tape.
Any tips?

Strange maybe, but as a shooter, I've seen material show 'timecode' breaks on footage I've shot, knowing there was no break in tape....occasionally within a rolling shot. (JVC GY-DV500 camera)
Could be the camera not laying a strong timecode signal...I've read that Canon's are notorious for this, though I've not experienced it myself...yet.
Turning the camera off/on is very likely a culprit here. Not to be condescending, but here are my camera procedures to eliminate timecode breaks...not that you don't know this already...
- Get in the habit of always rolling 5 sec. of tape before action starts and 5 seconds of tape after action ends.
- Try not to turn the camera off.
- Try not to do 'searches' on tapes that are being recorded on.
- If the camera is turned off, or you need to search back into the tape, make sure you do NOT roll past the end of the last recorded frame...preferable stop a couple of seconds prior to the last recorded frame, and begin recording there.
- If your camera is capable of generating Bars, try to record 10 seconds of bars in between scene or location changes.
-if you have to pop the tape out of the camera at any point, follow the above listed practice of cueing up to a couple of seconds prior to the last recorded frame, and start recording there to pick up continous timecode.
-Really, really try not to... (IOW - DON'T) use 'free-run' timecode. It will make editing an absolute nightmare...particularly for NLE's.
not sure what mac os extended means
This is how the drive is initially formatted. Often drives are designed to work with PCs and MACs. If you drive is not formatted Mac OS Extended, you could see abbreviated captures as well...among other problems...
start/stop detect
This will take a long capture and place markers at the points the camera stopped/started rolling, allowing you to create subclips from the original long clip...Main Menu/Mark/DV Start/Stop Detect...the camera must have an internal clock running, and not all cameras support this feature.
Hope that helps,
Kevan

I am having difficulties loading pages. For example: I am on the powerschool web site looking at my child's grades. I want to get into a specific class and the page either takes many minutes to load or I get the error message that the page can't load. He

Can't get into specific class grades. It's not just here though; many pages load and load and load taking an extremely long time only to get an error message.
== URL of affected sites ==
http://ps.hibbing.k12.mn.us/public/home.html

Hello, could this be it?
Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality
http://support.apple.com/kb/HT5559

Adding 24p look in FCE HD 3.5

How can I create the 24p film look in FCE HD 3.5? Orig. footage is 60i.
G4 DP MDD FW800 Mac OS X (10.3.8)

Get Graeme Nattress' Fim Look plugin. http://www.nattress.com

Adding STAND BY REDO LOG in the Primary side........

Hi All,
I have set STANDBY_FILE_MANAGEMENT=AUTO in standby side and also LOG_FILE_NAME_CONVERT is pointing to an exiting location at OS level...
When i added a datafile to an existing tablespace in the primary side and performed a log switch on the same . The added datafile got
relflected in STANDBY side ...
But when I am trying to add a standby logfile (new group) is not getting added .........
Please help me on this...........
For this will I need to perform the below steps .
1-Add a standby redolog in the Primary side......
2-then Cancel the managed recovery process from the standby side...
3- Add the same standby redolog (same name and size) in the standby side
4-put the standby in recovery mode ......
Thanks

Thanks for the reply ......
I have gone thgrough it....but i donot find my answer .....
My question is "Why *STANDBY_FILE_MANAGEMENT=AUTO* functionality is not adding a standby redolog in STANDBY SIDE automatically
when i am adding a standby redolog in the PRIMARY SIDE.....
Thanks.......

Adding a new mailbox in MAC Mail not working

Please assist me on how to troubleshoot this issue I'm having on my mac mail.
I added a mailbox by clicking the primary email inbox then after that I checked the newly added mailbox but no emails are coming in. I tested to send an email to that mailbox but still no emails are arriving.

Hello cliffcrusher,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Best of luck,
Mario

HT201320 I am the added e-mail on my wife's iPad. I can not delete any mail in trash? Thus Trash is collecting in bin. I can delete trash in her Mail account?

II'm having trouble deleting messages in trash bin in mail, only on the added e-mail account. The primary account functions fine! I note several users are having the same problem!
JAR

Hey BSK_AplSprtCm,
Thanks for the question. I understand that you are experiencing issues with your Mail account. It sounds like you may need to configure which mailbox is your Trash mailbox. To do so, see the following:
Mail (Mavericks): If messages aren’t stored where expected on the mail server
http://support.apple.com/kb/PH14957
If there’s another mailbox on the IMAP server (for example, Sent Items) that contains the messages you’re looking for, you can have Mail use that mailbox to store messages. To do so, select that mailbox (listed under the account’s name and icon) in the Mail sidebar, choose Mailbox > Use This Mailbox For, then choose Drafts, Sent, Trash, or Junk, as applicable. You can select any mailbox on your IMAP server to store draft, sent, deleted, or junk messages. If Mail can’t upload messages to a server mailbox, copies of the messages aren’t saved.
Thanks,
Matt M.

Question about TimeCode breaks

Hopefully the questions will get less!!
Having discovered the HV30 can shoot in both HDV and DV mode, I am now trying to capture the scenes, which is going well. However, my ref book goes into quite a bit of detail about the issues of "timecode breaks".
I purposefully added some breaks to the movie I shot, by simply stopping and starting, nothing else. Used the Capture Now feature. FCE was able to find these breaks ( DV Start/Stop Detect) without problems, so I wonder what it is that I am missing about the significance of this method. {Capture is being done from HV30, FCE 4.0, 10.5.2) using a 800f/w cable directly to a drive on the computer).
Thanks in advance.

I have worked out a solution for timecode breaks which is easy and relatively uncomplicated.
Background:
I recently borrowed by Father's Canon ZR700 mini-DV video camera. I have an older ZR200. Both are decent cameras, especially for the price. However, when I tried to import video from the ZR700 camera using FCE 3.5.1, I experienced breaks in the time-code which produced an unworkably slow process as FCE looked for timecode breaks.
Solution:
After some thought, I decided to use iMovie 06 to experiment with off-loading the video to DV and then "sharing" it back to "video camera" via mini-DV tape.
By using this transfer technique and employing the ZR200 camera as the "sharing" camera - which takes a little extra time and loses the original time code information - I was able to produce a tape which created a smooth and continuous import into FCE without timecode breaks.
I went on to experiment with this same process using the original ZR700 as the "sharing" camera, that is to say, I shared the DV back to the same tape from which the original video was extracted, and it worked fine.
Although I can't exactly explain why this works, I suspect that the timecode is placed in the video using a different route than the record head and FCE can see it.
Why the Canon ZR700 model exhibits such random and poor quality timecode quality is unclear. It may be this particular unit or for some other reason associated with the design or production quality. However, the older ZR200 camera is great and gives solid timecodes on all my videos.
Last note: I also used a record speed of LP versus SP when I "shared" in iMovie 06, even though the original video came from an SP tape. I can't see any difference except that the tape lasts longer.
WARNING: This technique loses - or appears to lose - the original recording information which is imprinted on the tape, including the date and time when the video was recorded. In order to re-create that information, I place a note into the video in iMovie 06 which states when (date and time) the video was taken. Some people care about this information, others don't.
Well, that's my solution to dropped or irregular timecodes. I would be interested to know if this technique works with other cameras.

How to chng primary email acct. to another email acct.

Was playing around w/ adding my bellsouth email to X the other day, since it's my main email @ home. Figured it be nice to be able to look @ them if I'm out & about, & waiting for an email from someone or for something specific. I guess when I added it, I made it the primary acct. However, I would like to chng back to the gmail as the primary acct. on the X. Can't seem to figure out how to do this, or been able find any thing on how to do this. I did call cs, & as usual their answer is, u have to do a factory reset to do this.
If someone could please enlighten me on how to do this or verify that what cs told me is correct, would be much appreciated.
pcw67427

pcw67427 wrote:
Was playing around w/ adding my bellsouth email to X the other day, since it's my main email @ home. Figured it be nice to be able to look @ them if I'm out & about, & waiting for an email from someone or for something specific. I guess when I added it, I made it the primary acct. However, I would like to chng back to the gmail as the primary acct. on the X. Can't seem to figure out how to do this, or been able find any thing on how to do this. I did call cs, & as usual their answer is, u have to do a factory reset to do this.
If someone could please enlighten me on how to do this or verify that what cs told me is correct, would be much appreciated.
pcw67427
Select the Messaging icon.
When messaging is open, select the menu button (bottom left) and then select Messaging Settings from the pop-up window.
When the menu for messaging settings opens, select Email.
When Email settings opens, select Default Email Account.
PS. no factory reset needed

UCCX 7.0.1SR5 to 8.0 upgrade while also adding LDAP integration for CUCM - what happens to agents and Historical Reporting data?

Current State:
•    I have a customer running CUCM 6.1 and UCCX 7.01SR5. Currently their CUCM is *NOT* LDAP integrated and using local accounts only. UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
•    The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
Goal:
•    Upgrade software versions and migrate to new hardware for UCCX
•    LDAP integrate the CUCM users
Desired Future State and Proposed Upgrade Method
Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server.
Then during a weekend maintenance window……
•    Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
•    Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
•    Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
•    Restore the data from the UCCX PUT tool
•    Continue setup per documentation
At this point does UCCX see these agents as the same as they were before?
Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
We can simplify this question along these lines
Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01. Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software.
If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens?
I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
What would historical reporting show in this case? A set of old agents and a set of new agents treated differently?
Has anyone run into this before?
Is my goal possible while keeping the agent configuration and HR data as it was before?

I was doing some more research looking at the DB schema for UCCX 8.
Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
Database table name: Resource
The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive.

Why do we need standby redo log on Primary database.

Hi Gurus,
I was going through the document in OBE,
http://www.oracle.com/technology/obe/11gr1_db/ha/dataguard/physstby/physstdby.htm
I have two queries:
1) I noticed the statement -
"Configure the primary database to receive redo data, by adding the standby logfiles to the primary. "
Why do we have to create standby redo log on a primary database?
2) There is another statement --
"It is highly recommended that you have one more standby redo log group than you have online redo log groups as the primary database. The files must be the same size or larger than the primary database’s online redo logs. "
Why do we need one additional standby redo log group than in Primary database.
Could anyone please explain to me in simple words.
Thanks
Cherrish Vaidiyan

Hi,
1. Standby redo logs are used only when the database_role is standby, it is recommended to be added in primary also so that they can be used on role reversal, however during normal working standby redo logs will not be used at all on primary.
2. In case of 3 online redo log groups, it is recommended to use 4 standby redo log group this is in case if log switching is happening frequently on primary and all 3 standby redo logs are still not completely archived on the standby and 4th can be used here as there will be some delay on standby due to network or slowness of arch on standby.
Use of the standby redo log groups depends on the redo generation rate, you can see only 2 standby redo logs are getting used while you have 4 standby redo log groups, when the redo generation rate is less.
So it is recommended to have one more standby redo log group when redo generation rate is high and all of the existing standby redo log group are getting used.
Regards
Anudeep

Page break, or start to next page?

Hi,
I have a paragraph style that must be mirrored in a running header. So, I must create a single style for both paragraphs staying in the same page, and paragraphs starting in a new page. Therefore, I must add the break manually when needed (unless InDesign accepts a running header format of the boolean type AND).
I'm in doubt on how to do with sending paragraphs to a new page. I see two viable options: inserting a page break at the beginning of the paragraph, or going to the Keep Options palette and choosing Start On Next Page. The first one has a handy shortcut, the second one, as far as I can see, has no shortcut.
Apart for how comfortable it is adding the one or the other break, and the added line when using the break charachter, is there any other consideration I should keep in mind? Why the one solution is preferable to the other? Are there compatibility issues when exporting/importing text files, web pages of ebooks?
Paolo

Paolo Tramannoni wrote:
Hi,
I have a paragraph style that must be mirrored in a running header. So, I must create a single style for both paragraphs staying in the same page, and paragraphs starting in a new page. Therefore, I must add the break manually when needed (unless InDesign accepts a running header format of the boolean type AND).
I'm in doubt on how to do with sending paragraphs to a new page. I see two viable options: inserting a page break at the beginning of the paragraph, or going to the Keep Options palette and choosing Start On Next Page. The first one has a handy shortcut, the second one, as far as I can see, has no shortcut.
Apart for how comfortable it is adding the one or the other break, and the added line when using the break charachter, is there any other consideration I should keep in mind? Why the one solution is preferable to the other? Are there compatibility issues when exporting/importing text files, web pages of ebooks?
Paolo
I think that the commercial plug-in Power Headers from in-tools.com has the kind of logic you describe.
HTH
Regards,
Peter Gold
KnowHow ProServices

Adding a LOOK in SG breaks Primary Grade

Similar Messages

Maybe you are looking for