Adding a menu and moving buttons
I have 6 menus that were created by dragging my video track in and selecting set assest and create chapter markers. I set the chapter markers in final cut.
The show is in 2 Acts. However, my video assest is all one continuous track with chapter markers set for each song. There are 33 chapter markers and the program created 6 menus to accommodate all of the song choices.
I created a "go to ACT 2 menu" button on menu. Selecting this button is set to go to menu #4. However, this menu has the end of ACT 1 buttons and my first track of ACT 2 as well. What is the simplest way to separate the tracks on this menu and push everything forward? I think I need to create at least one more menu to contain all of the songs. I'm not sure how to approach taking buttons with songs associated with them and moving them to another menu.
DVDSP 4
thx!!
Simply cutting and pasting the buttons from one menu to another should keep their assets and targets.
However, your description of the chapter index menu creation process sounds a little strange.
I would recommend applying the index template you are starting with to a new menu, then customize it with the number of buttons you want. make sure to keep the buttons named PREV UP and NEXT, as these names are used for the buttons that navigate between the different index menus.
Once you have customized the menu, use it to create a new template.
Now take your track and option-drag it to the button on your main menu that will connect to the chapter index menus and choose "create chapter index: make connections". This is not the button for which you should use the track as the asset.
DVDSP will ask you to choose your chapter index template. Now each chapter should show up as the motion thumbnail for each chapter button.
Hope this helps -
Max Average
Similar Messages
-
I know click hold on and off then hold the menu and center button until the apple logo appears. I have tried this so many times and my iPod Classic is still unresponsive! I've tried plugging my iPod into my Mac, my wall charger, my ihome, everything, but nothing works. It won't connect to iTunes to restore or anything. I've tried leaving it unplugged long enough to let the battery die and then tried plugging it in, a method I've utilized successfully with other iPods but that didn't work either. I really just starting to lose faith in the quality of this product. The first classic I bought didn't work at all and I had to exchange it. This one I bought to replace my 5 year old nano and it hasn't even lasted 7 months! Somebody please offer me a solution and assure me that I didn't waste $250 on a crap piece of technology. I'm desperate!
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?
If it is otherwise working, you can change the battery. If you want to do it yourself, you can buy the part on eBay and other online sources. Just make sure you know the type of iPod you have so that you get the right part.
http://support.apple.com/kb/HT1353
There are online guides, including the ones on this web site
http://www.ifixit.com/Device/iPod
(Note: Most replacement batteries come with plastic/nylon tools seen in the guides.)
You can also have a repair business do the work.
If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes. -
iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My IPod classic was frozen so I followed instructions online and held donw the Menu and middle button and the screen went blank. I now have a dark screen and can't get the IPod to do anything.
Hello Lola51,
I would be concerned as well if my iPod was unresponsive. I found a resource that I think would help in a situation like this.
I recommend following the steps in this troubleshooting assistant:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
struggling to wake my apple tv wont respond even when holding the menu and down button any ideas ?
Did you try unplugging the unit from power, leaving it for ten minutes, then plugging in again?
If you have & it didn't work, Damian Smith1 posted this possible solution (I like to give credit where credit is due).
Connect your ATV to your computer and try restoring it to factory setting Use the link below to walk you through the process
Apple TV (2nd generation): Restoring your Apple TV
support.apple.com/kb/HT4367 -
I have a classic, several years old.
It will not recharge; the Apple logo flashes every few seconds then disappears.
I have tried the 'reboot' advice i.e. move the Hold switch on and off, hold the Menu and Center buttons, no success.
I have tried this many times and kept the ipod connected for several hours. And I have tried two different cords, one connected to the desktop computer, one connected to electrical outlet.Hi enbridge4,
If your iPod Classic won't charge or turn on, you may find the following articles helpful:
Apple Support: iPod won't turn on
http://support.apple.com/kb/ts1383
Apple Support: iPod's battery doesn't charge
http://support.apple.com/kb/ta44551
Regards,
- Brenden -
How do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?
how do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?
How long did you press and hold both the Select (Center) and Menu buttons together? Have you tried doing this procedure more than once? Is the hold switch in the Off position?
If nothing else, let the iPod's battery fully drain. Then charge it back up again.
B-rock -
Menu and select button causing ipod to reset
Hi,
Has anyone else had problems with their menu and select buttons causing the ipod to reset itself? As of now, I can't use either of those buttons without it resetting. I've tried using the updater, and I've tried manually resetting it. Any suggestions would be greatly appreciated.
-SarahWelcome to Apple Discussions!
Is all the software on your computer and your iPod up to date?
iTunes
iPod Updater
Updating iPod's Software
Have you tried a restore?
Restore the iPod
btabz
PS: I came into this thread thinking I was going to have to explain why holding down Menu+Select at the same time is supposed to cause a reset -
Menu and play buttons unresponsive
The menu and play buttons on the clickwheel are unresponsive, the interface is otherwise fine. I cannot turn the ipod off or return to menus after selecting something. I have already tried updating and restoring the ipod, I don't know what else to do.
Contact apple with this problem. Here is the link.
http://www.apple.com/support/ipod/ -
How to Deactivate MENU and SYSTEM button in Portal.
Hello,
I have created a SAP transaction iView of Y Transaction. Now it showing me all the buttons and Transaction Box on selection screen in EP. My requirement is to have only EXECUTE rest buttons should be hide.
Some of the buttons I have controlled from ABAP Program.Like SAVE,CANCEL,BACK etc.
And T-Code Box I have controlled from ICF transaction.
Follows the route: sicf->sap->bc->gui->sap->its->webgui->GUI Configuration
~WEBGUI 1
~THEME sl
~LOGIN
~PASSWORD
~NOHEADEROKCODE 1
Now Still it showing me MENU,SYSTEM and EXECUTE button.
I want to hide MENU and SYSTEM.
Please provide me the solution.Its really very important for me.Helpful answer definely be appreciate!
Regards,
Supriya.Hi santosh,
Thanks.
I have already checked the related note.And I am getting only Execute button when I set the parameter
~WEBGUI_SIMPLE_TOOLBAR 32 .It hides other button as well.
But I have to show another T-Code in EP it should have all the buttons SAVE,CANCEL,BACK etc.
Therefore in one report I want to show only Execute Button and in another report it should show all the button Except T-Code box.
I have hide SAVE,CANCEL,BACK button from ABAP program,except Execute Button and T-Code Box from sicf Transaction.
But shows MENU and SYSTEM button which I want to hide.
Suggest me.
Regards,
Supriya. -
My Apple TV has been working fine, even earlier today. When I turned it on this afternoon, the TV indicated that "no signal" was being received. Restarted, unplugged, reset by holding menu and down button, etc. still no signal. Thoughts?
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
1. Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
2. Connect the micro USB cable to the Apple TV and to your computer.
3. Reconnect the power cable (only for Apple TV 3)
4. Open iTunes.
5. Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
I just pluged in my Apple TV and I can't get passed the initial page that ask what language. My remote won't pair. holding the menu and right button for 6 sec
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
My Ipod nano says its locked and screens on and it's staying frozen. I have tried pressing the menu and select button simultaneously and still not reset. What should I do?
Right click on the iPod Nano icon. "Eject" should pop up. At least that is the way it works on Macs.
Just found this:
iPod: How to Safely Disconnect if iPod doesn't eject -
My apple TV is not responding to the remote. I've tried pressing the menu and rewind buttons for six seconds and no response, I've also tried changing the battery and that hasn't done anything either. Not sure what else to do!
Have you tried disconnecting the power chord on the Apple TV for a few seconds, and then plugging it back in to restart the Apple TV? There may be a glitch with the ATV, and not the remote.
Maybe you are looking for
-
Pooling Prepared Statement and Resultset
Is their any mechanism in Weblogic by which we can pool prepared statements and resultset.
-
PDF Digital Signature using SM2 Encryption
Hi, Is there any way to use SM2 encryption for digital signature in PDF instead of the default encryption? Thanks, Amir Mehmood
-
Changing directory Structure Problems
I've created a new Flex Project with a new directory structure that I'm unable to import! No error message, anything...I would like to be more specific, but I have no clue about what's happening...
-
when I tried to open Control Center from OWB, I take de following error: RTC-5260: FAILED TO CONNECT TO CONTROL CENTER, IT VERIFIES THAT IT HAS PROVIDED THE HOST, USER, PASSWORD AND SERVICE NAME CORRECT. RTC-5321: THE VERSION OF THE SERVICE OF CONTRO
-
Hi All, where to see the aggregated table for a cube.. this is the basic quest...where i have searched in forum i cant able to find the slon..for this.. Points will be assaigned!!! Thanks,