Adding a new device to cloud

I have Upgraded iPhones and transferred my SIM card card, however I can't get any of my apps, music etc on the new device? I have a cloud account but I am not sure how to add the new device?

You should be able to download your apps (if they are still in the store) via the Purchased tab in the App Store app on your phone. Whether you can also redownload music, via the Purchased tab in the iTunes store app, will depend upon what country that you are in - if you aren't in a country where music can be redownloaded (and for any apps that are no longer in your country's store) then you will need to sync it from your computer's iTunes

Similar Messages

  • I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this.

    I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this. I only have the one Apple ID and the phone is brand new, purchased directly from Apple.
    When I check on the phone itself (iCloud and App Store settings) the Apple ID is correct. I'm not sure where else to check.
    Whilst setting up the phone, it prompted me to register, which I did. Then when connecting to my laptop through iTunes it prompted me again so I registered again. I even got a confirmation email to the email address associated with my Apple ID that the registration was successful.
    How can I add my iPhone 5s to the list of devices on the correct Apple ID?
    Thanks in advance for any advice.

    Found the answer to my question after posting (in related discussions)
    https://discussions.apple.com/message/12331666#12331666
    Will call Apple Care as soon as I can.

  • Problems with adding a new device in Common Services

    Hello,
    I have the following problem: I need to add a new device in my Cisco Works. What I do is I go to Common Services >> Device and Credentials >> Device Management. There I click "Add" and I add the new device with the corresponding credential set.
    Then, in the RME >> Job Management >> RME Jobs I can see a new job created (
    CDA:CDA job due to Device Add. ) because of this addition but this jobs stays always in status Running and it never finishes. Most probablt because of that this newly added device never actually appears in the RME so I cannot operate with it - deploy software, save configs, etc.
    I did this test a few times and all the times this is the result.
    I tought that it might be a firewall issue blocking some protocol needed for the communication, as SNMP, telnet or something else. But if I go to Decice Center and I select this newly added device (which there appears with the question mark icon, not with the right device icon) I can see all the information for it, like Detailed Device Report, etc.
    Then I noticed that in the RME Jobs section I have some more jobs that are like running forever - "
    CredEditCDA: CDA job due to Credential Edit".
    See the attached image for details:
    So, my question is what might be the reason for this behaviour and what can I do in order to unblock these jobs and add my device normally?
    What I use is:
    Windows Server
    LMS 3.2
    RME 4.3.0
    Thank you in advance,
    Vesko

    OK,
    first of all, have you intergrated lms with ACS ? - check in common services - server - security - single-server mgmt - local user policy setup.
    If this is in ACS, check if the newly added devices is in ACS... Check if this devices is reflecting in common services itself...make sure that the device type is selected properly ???
    Next do a snmp test in device center for this machine..how would you do this --" in device center, select the device, do a management to station and select the snmpv2 and ok it" you will get if snmp is failing or not...As you mentioned it is coming in question mark..this is because the correct device type is not selected in common services.
    Do an update inventory & archive and check the status..
    ~ rate if this was helpful.
    -rajesh

  • Adding a new device emulator

    hi,
    currently i am using the wireless toolkit from sun to run my progs.. but sideby side i have also started using borland jbuilder enterprise 2005..
    now my question is actually regarding jbuilder.. in order to add a new device to wtk all i did was place the device folder in the wtklib/devices folder and that particular device emulator would be added to the devices installed list in wtk.. but i am trying hard to install a new device precisely the series 60 1.2. emulator to jbuilder but i am unable to do so.. any idea how this is done.. i have tried putting the device folder in the Borland\JBuilder2005\j2mewtk2.2\wtklib\devices folder.. but this does not detect the newly added device..
    please any help would be appreciated

    If you are unable to make the changed on your router using the Network magic software, then login to the setup page of your Router manually and secure your wireless network.

  • Adding a new device to my current itunes account

    Hi,
    I am very frustrated my husband bought me a iPad 2 yesterday.  I already have a itunes account with my current Ipod how do I synch itunes with my new device. 
    I have connected it to the computer opened Itunes but nothing no device comes up at all.
    What am I missing I have wasted 2 hours already and no further advanced. I thought it would have picked it up and walked me through the process but so far nothing.  I can't even manually go to synch as it isn't showing to choose.
    I tried downloading a newer version of iPod software thinking this was the issue but it froze and I had to pull the plug.  I have heaps of memory in my computer so that isn't the reason. 
    HELP

    If you haven't even activated the device yet - I'm not sure what to do - but I think you will have to do some experimenting.
    iTunes should recognize the device - under normal circumstances - and then walk you through the process like you said.
    Make sure that you are running the latest veriosn of iTunes - 10.5.3 is the most current now. You said you downloaded the latest version of iPod software but that doesn't make sense if the iPad is not being recognized - unless you just mean that you downloaded it but it has not installed yet.
    So .... Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Quit iTunes if it is running, and reboot your PC. Turn off your firewall and disable any security software that you may be running.
    Then connect the iPad to the PC again and see if it will recognize it and start the activation process.

  • Find my iphone - Adding a new device because old one stolen.

    Hi -
    I've recently had my iphone 5 stolen which was registered to my iclouds, as well as the 'Find my iphone' app.
    Since being given a new iphone from an insurance claim, I have tried to register this iphone with the 'find my iphone' app but have had a little trouble doing so, as my old iphone is still registered with my iclouds and thus still associated with the app.
    Obviously I don't know how to remove the app from my old device as it's no longer in my possession, so if anyone can give me a step by step to registering my new iphone with the app that would be fantastic!
    Thanks for your help guys!
    Steve

    Try removing the old device in iCloud.  http://support.apple.com/kb/PH2702   Then add your new device.

  • How do I prevent my content from being erased when adding a new device to itunes?

    I've had my 4s for about a year now and I just got a new windows laptop. I installed itunes and signed in but i dont know how to add my phone to this itunes. I know that normally you just plug your phone into the computer and it does it automatically but I know sometimes doing this will erase the content of the device. I have a lot of pictures and music on there that I obviously dont want to lose. So how can i add my phone to this new computer without losing everything?

    >burn the DVD in HD widescreen
    I am very confused... are you burning an SD DVD or an HD BluRay?
    DVD and HD do not go together

  • Adding a new device profile, a camera,  to ColorSync

    I recently purchased a Canon 40D digital SLR. It allows you to select the color space you want assigned to your image files -- I selected RGB. When you open the ColorSync utility there's a tab for devices and a list that includes 'camera'.
    How to I add my DSLR so it shows up in ColorSync?
    I keep hacking away at trying to have a color managed workflow. This stuff ain't easy, in my view.
    Greg

    The lack of clearly written documentation about color management is one of my pet peeves.
    Often recommended with perhaps more information than you ever wanted: *Real World Color Management* by Bruce Fraser.
    Color Management Info is a good online resource.
    What you say about sRGB vs RGB is news.
    My recommendation to stick with sRGB rather than AdobeRGB in the beginning is based not only on my own experiences, but mostly feedback in user forums such as this.
    Somewhere people may have read or heard that "AdobeRGB is what the pros use", so they just adopt that without thinking. Truth is though that most commercial printing services assume sRGB and even ignore any colour profiles in images – frustration guaranteed.
    It's a different story when you print at home in a closed workflow where you can control every stage of the process.
    It all starts with calibrating your screen. And if you want to make the most of your images, you will probably start shooting RAW, if you're not doing so already.

  • Adding a new device

    Hi,
     I have been a Blackberry user fro ever.
    My last phone was the pearl and it was slowly dying. A girlfriend of mine had a very new ish torch she no longer used. I have switched all the data and third party applications to the torch using the desktop manager however I can't get the app world or my e-mail working. When I log in to the App world via the computer it doesn't show the Torch as a possible device. It still has the pearl and the playbook.  I need help as I believe that it thinks the torch is still the pearl and wont let me activate my e-mails or get the app world. Do I need to get rid of the Pearl on the desktop manager?

    On the Torch, go to Options > Device > BlackBerryID, and enter your correct BlackBerryID username and password there.
    Call Rogers, and make sure they have this NEW Torch on your account, they will need the IMEI and PIN found at Options > Device > Device and Status Information.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Wirelessly adding a new device: Router versus Access Point versus Bridge

    My home network consists of a Linksys WRT54GS Wireless router with a couple hardwired PC and a wireless laptop. I want to wirelessly connect my TiVo into this network to download saved video onto the hardwired PCs, and to give my TiVo access to the internet (it currently uses a phone line). It looks to me like the choices to include the TiVo into my home network are to connect it (wired) to:
    (1) a Wireless Access Point (WAP54G),
    (2) a Wireless Bridge (WET54G), or
    (3) another Linksys Router (WRT54G) configured as WAP (router mode rather than gateway).
    Are all three options above valid options? If so I would like to understand what the differences between these choices are, and under what circumstances would one be better than the other.
    As part of this, is there a reason the Linksys Routers are much cheaper than the WAP or Bridge hardware. This is counter-intuitive since the Router appears to be the more complex hardware with multiple connectors, more memory, etc.
    Thanks.

    Well i would suggest you to get an Access point WAP54G as it works wirelessly & you will be able to use many pc's using it without a router.With WET54G you need to connect using the hardwired cable & you need to connect it using the cables to the pc's & configure it.With router you need another router & you can configure it accordingly in a wireless mode to make it act as an access point.

  • LMS 3.2 on Solaris 10 - New devices and RME archive job

    Hi All,
    I've created a RME job that archive syncs our devices. When I add new devices to Common Services, which updates RME, will those new devices have their configurations archived by that same RME job, or do I need to create a new job?
    When the existing job was created the option "All Devices" was selected.
    Thanks,
    Jose Ribeiro

    Hi Jose,
    If you really wants to track the devices configuration with the help of RME Jobs ( sometimes for auditing purpose we have to have a job ), then you can schedule a job as well but with the option Group Selector like (Select A Layer: Device SelectorGroup Selector ). You can see this option at the very top while creating the job. If you select this option, the membership of the group is dynamic in nature i.e this job will run on all those devices which exist in the group that you have selected at the time of running of job and not at the time of creation of job. For example, if you had created job on Normal Group of RME, then this job will attempt to take the backup of config of all those device which exist in Normal Group. So if your RME is synchronized with DCR (Common Services), and if you are adding the new device to Common Service, then you need not to add this device again for this schedule job since DCR will send this device to RME and once this device have inventory collected, it will automatically be in the normal group of RME and since we had selected Group selector option, RME will collect the config for this device too.
    However periodic polling and periodic collection is also desinged to acheive the same purpose and known as kind of administrative task for managing the devices in RME.
    Now the question arise what is difference between periodic polling and periodic collection :- Its very simple actually -
    Periodic Polling :- Under Periodic polling, RME will first poll the device and if it find any change in the actual configuration of device with the existing configuration in RME . it will trigger collection of backup config for the device. If it will not find any difference between the actual configuration on the device and the existing configuration in RME, it will not trigger any new sync archive on the device thus save your network resources.
    Periodic Collection :- Under Periodic Collection, it will not do any comparison and always trigger the sync archive on the device. However you will be able to see the new version of device configuration only when any change on the device happen since there is no point of keeping the same config many times in RME database.
    Hope it answer your querries.
    Thanks & Regards
    Gaganjeet

  • I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now on my device and no matter how many ways I try its not worked

    I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now showing on my device and no matter how many ways I try its not able to show any more.
    Does anyone know why this is happening and how to rectify the situation as I have tried every help setting for the last 4 hours.

    I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
    Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

  • We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

  • How do I add a new device to my cloud????

    How do I add a new device to my cloud?

    Welcome to the Apple community miuzarraga.
    Use your Apple ID to sign in at settings > iCloud.

  • I have photos on my iPad (the first apple device in our household) and then added an iMac and a macbook air. How do I get all of my photos on all devices. Myoriginal iPad has images not on my 2 newer devices and my 2 new devices do not share the same phot

    I have photos on my iPad (the first apple device in our household) and then added an iMac and a Macbook air to our network. We have an airport 2TB back up device.  How do I get all of my photos on all devices. My original iPad has images that my 2 newer devices do not have on iphoto.

    My original iPad has images that my 2 newer devices do not have on iphoto.
    How are the images stored on your original iPad? Are they in the camera roll, in events downloaded using the camera connection kit, or are they in albums synced to your ipad from a computer?
    If the photos are in the camera roll or in events downloaded from a camera, you can transfer them to your iMac and MBA by directly connecting the iPad using USB. Then you can download the photos to iPhoto like from a camera.
    Only, if your photos have been synced to the iPad from a computer, you will have to save them first to the camera roll; then you can download them by connecting the iPad via USB.
    What IOS version has your iPad?
    For new photos you might consider using Photo Stream to transfer your photos between the devices.
    See: iCloud: Photo Stream FAQ
    iCloud: Using and troubleshooting Shared Photo Streams
    -- Léonie

Maybe you are looking for

  • W2reprint not creating spool

    I am working on setting up the online W2 functionality for my client in USA. The W2 reprint request is not creating a spool in SP01.When I tried to debug the (W2FORM) object, the submit statement SUBMIT rpctrpu0 is returning with found = X. When I ch

  • 8830 connectivity in Japan with CDMA

    Hello, I want to purchase the 8830 with CDMA and wonder if this smartphone does also work in Japan, calls and data, furthermore I need to buy the phone in Canada without a contract as the 8830 is not available in Germany! Is there any difference betw

  • New tax code creation and assign..?

    Hi gurus Can anybody explain me how to create new tax structure and were to assign or configure the same tax tax structure For purchasing .. For example, service tax structure 12%ecess2%hsecess1% + vat4%.. Pls guide me .. Thanks sap-mm

  • Electrochoc : la prochaine suite d'Adobe en location obligatoire !!!

    Bonjour, J'étais un heureux client et utilisateur des outis Adobe depuis de nombreuses années. Comme pour beaucoup d'entre nous, ces outils sont devenus indispensables et il est difficielement imaginable de s'en passer ou basculer sur une inexistante

  • Incoming Idoc

    Hi Guru;s We have issue that one idoc will taking time to update sales order is 10-12 minutes due to huge line items and handling unit... Is any way that we can update 2-3 sales order at time in parellel so that time will save. or any otherw ay for t