Adding a new DNS zone to OD master for use as mail server
hi all,
i recently migrated form apple's postfix to kerio mail server. i am usung an xserve to run OD master, DNS, Jabber, Windows PDC and kerio mail.
server name is mail.domain1.com and i am hosting it on local IP 192.168.0.4 and using NAT on my firewall.
i would liek to setuop another kerio domain and mail server on the same box but not sure how to approach DNS.
i need to add mail.domain2.com
i am abel to add the second mail server in kerio but not sure if i need to setuo a second DNS zone on the same server on order to be able to have my local clients conect to the new domain. i only have 4 users for domain2.com and plan to use kerios built in autrhentication so i dont realy need another LDAP or user authentication server for now.
currently i am using the hosting package of my provider to server mail.domain2.com as well as www.domain2.com
i would liek to keep the site wit he hosting company but just move the mail server with my kerio server. that is teh setup i have for domain1 - i host mail server mail.domain1.com on premices and i have my domain reqistration site host the site for www.domain1.com
i assme i can do this with virtual domains?
any help is appreciated.
thanks
martin
hi all,
i recently migrated form apple's postfix to kerio mail server. i am usung an xserve to run OD master, DNS, Jabber, Windows PDC and kerio mail.
server name is mail.domain1.com and i am hosting it on local IP 192.168.0.4 and using NAT on my firewall.
i would liek to setuop another kerio domain and mail server on the same box but not sure how to approach DNS.
i need to add mail.domain2.com
i am abel to add the second mail server in kerio but not sure if i need to setuo a second DNS zone on the same server on order to be able to have my local clients conect to the new domain. i only have 4 users for domain2.com and plan to use kerios built in autrhentication so i dont realy need another LDAP or user authentication server for now.
currently i am using the hosting package of my provider to server mail.domain2.com as well as www.domain2.com
i would liek to keep the site wit he hosting company but just move the mail server with my kerio server. that is teh setup i have for domain1 - i host mail server mail.domain1.com on premices and i have my domain reqistration site host the site for www.domain1.com
i assme i can do this with virtual domains?
any help is appreciated.
thanks
martin
Similar Messages
-
Just got a new iphone5. Why are addresses for every e-mail I've sent for the past 2 days added to my contact list -- not just once, but twice!? How can I stop this from happening?
Firefox doesn't store email addresses except as form data; data that you typed previously into Firefox.
See if clearing form history solves that problem: [https://support.mozilla.org/en-US/kb/control-firefox-automatically-fills-in-forms?esab=a&s=clear+form+data&r=5&as=s#w_clearing-form-history Clearing form history] -
i'm trying to add an email account and followed on screen directions but after "verifying account" screen i got "new account" and no options highlighted but "cancel" The mail server is our local phone company. Appreciate any help.
Hello there, shallotte07.
The following iPhone Troubleshooting Assistant should get you through all the steps to set up mail:
Apple - Support - iPhone - Setting up Mail Assistant
http://www.apple.com/support/iphone/assistant/mail/http://www.apple.com/support/iphone/assistant/mail/
Remember that some Service Providers require particular settings, and you may need to contact them directly to acquire that information. Check out the "Email cheat-sheet" section in the information that follows:
If iPhone can't find your service provider's settings, this article can help you obtain the necessary account settings from your provider.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Adding a new field to the Address Data for a business partner
Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
YusufThe search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
read table shlp-fielddescr into wa_shlp
with key tabname = 'M_PREMN'
fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
select orgeh endda
up to 1 rows
from pa0001
into (ld_orgeh,ld_endda)
where pernr eq record_tab-string+wa_shlp-offset(8)
u201Cpernr length is 8
order by endda descending.
endselect.
select single orgtx
from t527x
into ld_orgtxt
where orgeh eq ld_orgeh and
sprsl eq sy-langu and
( endda ge sy-datum and
begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop. -
It charged me for what i had purchased like 5 months ago just because i added a new billing info.
The only way is to contact them and find out
Contact iTunes -
Problem in adding a new element having attribute & many children for XML(jd
I m creating a new element <row id="1" > & many childrens & similar new elements with increment id are created.
And this is added to a tag 'data'
But after creating when i m iterating thru' the elements of the node 'data', for the new elements which i have created, if i try to set a new value for any of the chidren of 'row' tag, the value is getting set for all other newly created elementsLet's see how you're doing this... got any code?
-
Adding a new search criteria in Web UI for Sales Order
Hi,
We have a requirement for Web UI as follows :
We want to add the ID number (identification number in BP ) as search criteria for Sales Order simialr to search criteria available in Accounts with ID number .
Can any one please give some inputs on this ?
Regards
VinayakHi Vinayak,
I will try to give you some technical advise.
What you would need to do is:
In transaction SM30 open up view: CRMV_OBJ_BTIL
There is an entry for External Object Name "BTQAct"
The currently used DDIC structure is CRMST_QUERY_ACT_BTIL
You will need to adjust this structure to bring completely new parameters to the UI. This means put in your own.
As you can see in detail for this entry there are three fields with name "Structure" the last one is for the GenIL handler class. Currently it should be empty (there is some fancy SAP logic to determine it automatically). You can override it with your own handler class implementing the logic. As a hint: The implementation class currently used is: CL_CRM_QACT_RUN_BTIL
Anyhow most 1Order searches are handled by the class CL_CRM_Q1O_SEARCH perhaps you can use it as well. Additionally it would be a good idea to provide your users with a value help.
Oh and there is a customizing that lets you define which options (IS, BETWEEN, IS NOT, ...) should be available for the user. Please do not try to do this hardcoded
cheers Carsten -
Adding a Loading Animation to a Captivate movie for use in a RoboHelp Project?
Hello all:
I'm inserting SWFs (built in Captivate 5) into Robohelp topics (using RoboHelp 9, publishing to WebHelp Pro output). These topics hold only the SWFs, so I've published the SWFs to autoplay when opened.
The problem is this: when I publish my RoboHelp project, my Captivate movies display as image icons (see screenshot). There is no loading animnation or screenshot to indicate that the Captivate movie works. If I wait a few seconds (variable, depending on file size of the SWF), the movie will appear and start to play. I'm concerned that my user will think the file is broken and leave the page.
How can I enable a loading animation (or even a loading image) to show my user that there is, in fact, content on the page when the topic loads? I'd like to keep the auto-play functionality, if possible.The best option is to break out the words because it gives you the most control. However, if the two words you want to glow are next to each other you can use the Sequence Text behavior.
Select the text and apply Text Animation/Sequence Text to the layer. In the behaviors tab, click on the Add parameter and select Glow/Color. This will create a parameter that you can assign to a character, word, line or custom area.
Now you'll need to add several parameters so repeat the above step adding parameters for Glow/Opacity, Glow/Blur, and Glow/Radius. You might even want to change the color of the font for those two words. If so, add a parameter for Face/Color.
Once you have all the parameters added, change the Traversal parameter to Custom. Change the Select parameter to Custom. Use the Start parameter to determine the beginning of the "glow" area, and the End parameter to fix the end of it. Set the Spread to 0 so there is no spillage of the glow to the words on either side.
Now adjust the color, blur and radius of the glow just as you would if you were adding it to the entire paragraph.
Andy -
Attach multiple emails to one master email using Java mail API
Java version: JDK 1.5.0_15
Hi,
I am using Java API to send email using our corporate microsoft exchange server. Everything is working fine, now I have a requirement to attach multiple emails to one master email and send.
Question:
Using JAVA API is it possible to attach multiple emails to one email?
Regards,
ArupThe beginning of this FAQ entry tells you how to attach one message to another message:
http://www.oracle.com/technetwork/java/javamail/faq/index.html#forward -
Steps for adding a new attribute
Please let me know if the below steps are correct
=================================================
I have an Infoobject called 0XXXX in BW and want to add another attribute called XXX_TYPE.
This infoobject is used in 2 Info Cubes and a Multiprovider. Also in 3 queries.
In R/3 the info I need is stored in a Table(XYZ). Please let me know if the below steps are correct and all I need
1) Create a generic extractor to pull the data from XYZ table (Like an ABAP program) .. This is the part which I am not clear !!!
2) Modify 0XXXX in BW to add this new navigational attribute
3) Load Master data using process chain
4) Re activate all update rules
5) Change Infoprovider's for the new attribute (How to do that ??)
6) Change query (What changes will I need to make .. Just select this attribute field into the required query)
Please helpHello,
As you said, either enhance the extract structure by adding this new InfoObject and then write the code in the user-exit.
Or if the SAP table has the Key fields of the InfoObject, then create a generic extractor. Create a view by including the key fields of the InfoObject and the new attribute InfoOBject for which data has to be derived from this. Use this view or the table itself for the extractor.
Create new InfoSOurce for the InfoObject which will only update the new InfoObject. Keep only transfer rules for the Key InfoObjects and the new InfoObject.
GSM. -
Facing Problems in screen navigation after adding a New custom tab to MM03
Hi,
I have added a new custom tab to MM03 transaction by using SPRO.This new tab is appearing in between Basic data 2 tab and Classification tab in MM03.In my new tab i have 4 sub screens and the Last sub screen has table control.Now the problem is when i slide the vertical bar in my table control it is automatically triggering the Classification screen.
For preparing the New tab in SPRO ->SAP Reference IMG ->Logistics-General->Material Master->Configuring the material master ->Define structure of data screen for each screen sequence ->
Here i have created a new screen sequence 'Z5' by copying the already existing sequence '21'.Inside this new screen sequence i have created a new screen of mine by copying the already existing screen '4004'.
For maintaining the screen sequence i.e., to place the new tab between Basic data2 and Classification tab go to SPRO ->SAP Reference IMG ->Logistics-General->Material Master->Configuring the material master ->Maintain order of main and additional screens.I have changed the order of main screen sequence to make our new tab the third tab.
To make this new tab visible only for MM03 transaction i have gone to SPRO ->SAP Reference IMG ->Logistics-General->Material Master->Configuring the material master ->Assign screen sequence to User/Material Type/Transaction/Industry sector.In this in the Transaction screen reference, I have changed the screen reference number for MM03 and i have include this new screen reference entry in the screen sequence control column.
To create the sub screens required i have gone to SPRO ->SAP Reference IMG ->Logistics-General->Material Master->Configuring the material master ->Create Program for customized sub screens and have copied the standard Function group MGD1 and created 4 sub screens.
Now to place these 4 sub screens in the order required for us i have once again gone to SPRO ->SAP Reference IMG ->Logistics-General->Material Master->Configuring the material master ->Define structure of data screen for each screen sequence and i have selected the new screen sequence created 'Z5' created by me.Inside that i have selected the screen created by me '4004'. Now i have double clicked the Sub screen options and here i gave the sub screens numbers created by me replacing the standard sub screens.
Then I activated by custom function group and i started testing the MM03 transaction.
My screen was getting populated properly and the tab movement is also fine but only problem was when i slide the table control in the fourth sub screen of my new tab i am going to fourth screen (classification).
Can you please help me by suggesting what the problem may be, why this issue in navigation.Hi ,
I have the same problem now ...
Did you solved it?
Thanks a lot!
Regards,
Hancila -
[svn] 3501: Adding the new CallResponder component.
Revision: 3501
Author: [email protected]
Date: 2008-10-06 17:42:26 -0700 (Mon, 06 Oct 2008)
Log Message:
Adding the new CallResponder component. This is best used from MXML to implement
a specific invocation of a specific RPC service operation. It separates the use of the
RPC operation from its definition.
QE: New class (and MXML component)
Docs: Yes - see the asdoc for info.
Checkintests: pass
Reviewer: Pete, Seth, Ed, Sameer
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/manifest.xml
Added Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/CallResponder.asDid you import the 3 required SC:
SAP-JEE,
SAP_BUILD
SAP_JTECHS
the DC: sap.com/tc/ddic/metamodel/content is part of SC SAP_JTECHS
You can brouse all imported DCs from CBS
SAPs should be 161. The one you are looking for is N:31 in the SAP_JTECHS
If you have problem with the local bild, than you havn't checked out all DC to your NWDS.
Regards, Angel -
Manual of adding the new node on RAC with ASM
Hello everbody
Someone have the manual of the adding a new node on RAC with ASM for Solaris ?
regards
SpaulonciGo to http://www.oracle.com/technology/documentation/index.html, select your unknown database version and search for a manual named 'Oracle Clusterware and Oracle Real Application Clusters Administration and Deployment Guide'.
Werner -
DNS configuration behind a router for Mail Services
I am in the beginning stages of trying to set-up a test ground for a local mail server. I am playing with OS X servers DNS functions. I am new to DNS and am having slight trouble.
What I want to do is have OS X DNS point to another server that is on my nat for mail exchange (it is a suse linux box running kerio).
My current set-up is:
internet --> Router for internal NAT --> OS X server is behind this nat on an IP of 10.100.251.10, the suse box is on 10.100.251.11
I have set-up a primary zone: ns1.domain_x.com with a server IP being that of my internet static IP (supplied by my ISP).
I have opened the necessary ports on my router (53) to point to the os x server box for DNS serving.
My problem is.. I need to setup a mail exchange (mail.domain_x.com) record that points to the 10.100.251.11 box.
When I do this and the global DNS servers update, a host lookup will point mail.domain_x.com to 10.100.251.11
Which obviously is not right.
am i missing a concept here?
the dns server and the mail exchange I want to run are being running on the same Internet IP address, just behind a nat that the os x server is not controlling.
any suggestion would be appreciated.. TIAThe MX data/pointers is only needed for server to server mail exchange so that is no problem.
(If the DNS and the mailserver are supposed to use the same public IP but run on different NATed IPs/machines you forward the traffic to the different NATed IPs based on portnumbers in your Internet router/firewall.)
The problem I think is the mailserver finding itself on the right IP for the public IP domainname.
I guess the easiest way to do it would be to have two DNS machines: one for public and one for private IPs.
The private IP DNS would serve the mailserver and the internal NATed network, if you are using the same domainname internally.
Or (as the one with the public IP data is NATed), maybe BIND views can be used to serve different zonefiles for the same domainname depending on wether the DNS lookups comes from Internet and/or the NAT router gw LAN IP or if they come from any other NATed LAN IP.
Or maybe having only a hostfile with the private address for the same domainname would suffice on the mailserver and also using the ISP's DNSes for finding other public IP mailservers on it.
That wouldn't fix finding the mailserver (using the same domainname) from other machines on the NATed LAN though. -
Child DNS Zone changing PTR record of OD Master
Grretings,
I am setting up a new OD master server for our school that will also host our DNS. Home folders will be on another server. I am using the DNS GUI for now. Setup master DNS zone of ourschool.lan. OD master has FQDN of admin.ourschool.lan with an IP address of 172.16.2.254. Forward and reverse lookups of OD master are great.
#host admin.ourschool.lan returns 172.16.2.254
#host 172.16.2.254 returns admin.ourschool.lan
When I go to set up a child zone, highschool.ourschool.lan, on this server I set the nameserver to ns1.highschool.ourschool.lan and IP address of 172.16.2.254, I have had the following happen:
#host admin.ourschool.lan returns 172.16.2.254
#host 172.16.2.254 returns ns1.highschool.ourschool.lan (not what I want!)
I understand forward and reverse lookups to OD master need to be rock solid. The changing of the PTR record is going to ruin this. Has anyone else seen this behavior. Should I just do the DNS through terminal and forget the GUI?
Thank you for any feedback. I searched this discussion list and didn't find anything similar to this in the postings.
Best Regards,
Steve
OS X Server and Client Mac OS X (10.4.6)Your problem stems from the fact you're trying to create two separate A records for the same IP address.
The GUI will automatically create a reverse DNS entry for each a record. Since you have two A records that point to 172.16.2.254 that's where your problem lies.
Your solution is either to use a CNAME (or alias) for the second hostname (e.g. ns1.highschool.ourschool.lan CNAME admin.ourschool.lan), or manage the DNS by hand and don't use the GUI tools.
Maybe you are looking for
-
Hi, I created an Pages document to do a "scrapbook" page. I wanted to use a special character so I opened the font menu, then selected characters... on the flyout menu, and now I have a character palatte that blinks on and off when I switch from an a
-
How to interchange the value of XVBAP-ABGRU and YVBAP-ABGRU
Hi All, I have a requirement like if user change the reason for rejection then we hav to restrict him without stopping by reverting the old value. and one information message saying you are not authorized. this should be done when user click enter a
-
Dear All , Following is my scenario : I have one service order which have actual cost of 100$ , i make debit memo and generate billing document and relase to accounting with 150$ with profit . Now when i came back to my service order there is nagativ
-
What is the best strategy to back up to a USB drive?
Hi All I am going to buy a USB drive for backup and have a few questions that might have been worked out by others. These drives come pre-formatted with vfat. My first inclination would be to use rsync to perform the backup but vfat can't hold all
-
My Canon ZR800 won't import even though all cords are plugged in
It was working importing but then it said disconnected or off and now it doesn't even recognize that the cameras plugged in