Adding a new field in EEWB and pulling this to IC 4.0

Hi All
i am trying to add a new field thro EEWB in CRM 40 and link to CRM IC . I have successsfully added the field and the same is now appearing in the IC webclient.
Now I need to passvalues Yes and No and the deafult shall be blank in a drop down list box
How to pass the values. Please forward the code to attach in BSP and where.
Also I need to make this field as mandatory and a error message should be visible in the IC
I shall reward points
SURYA

Hello,
I have looked at wiki below [http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component]
Kindly suggest ways to acheive adding new field in Opportunity Search ( employee responsible which is not the main contact like I mentioned ) which belongs to another component ...Can it be done without coding eg. adding to design layer.
Can you please give steps to do the same.
Thanks.
Regards,
Monica

Similar Messages

Adding new field using EEWB and using it for Pricing

Using the Easy enhancement workbench, I have created a new tab containing a new field at the item level of contract. Then in SPRO, in the field catalog, I added a new entry using the same field name and data element name. Created a new condition table with this new field. created access sequence and assigned it to a condition type.
I tried to maintain condition record for the condition type but initially it was showing some error for which I had to implement a new method for the BAdi /SAPCND/ROLLNAME.
Now. condition record is also maintained successfully.
But, the problem is that the value is not reflected at the contract.
Somehow, the condition record is not being picked up.
Please suggest some solution.
Regards,
Anindita RoyChowdhury.

Hi Anindita,
Stpes mentioned in your questions are fine.
You have created new Screen @ item level in Order txn, right?
Did u checked value passed to the method of BAdI ?
As per my knowledge, pricing call must have happened before you fill the Zfield which u added in new screen. Hence no value in field and no effect on pricing.
Regards,
Deven

Adding a new field in searh and result [ comb of 2 other fields ]

Hi ,
I have to add a new field in Opportunity Search and later OpportunitySearch Result. This field belongs to Opportunity Details -> parties Involved view , and is a combination of 2 fields there..Partner function and Main Partner (unchecked ). Details are as below..
Can you please suggest easiest way for achieving this..
Details of the Opportunity Search where I need to add a new search field
Component : BT111S_OPPT
Context Node : SEARCH
View : BT111S_OPPT/Search
Details of the new search field (Present In the Opportunity Details, there is a viewset for Parties Involved ) ..The new search field should be Employee Responsible but not the Main Partner ( kind of a substitute OR Secondary Employee Responsible )..2 employee responsible is permitted in partner determination..
Component : BTPartner
Context Node: BTPartner
View : BTPartner/Partner
Attribute : Partner_fct
Generic Object Type = 1Order
+
Component : BTPartner
Context Node : BTPartner
View : BTPartner/ Partner
Attribute: MainPartner ( Not checked = 0 )
Is there a simpler way without coding to achieve the above?
The route that we have thought of is ...Let me know if there is an alternate simpler way...and If I am missing anything
1.Create a custom field using EEWB ( I am not well aware of AET, and not aware how to enable this in our
environment as we upgraded to 7.0 recently ) For CRM Opportunity Transaction Type.
2.This will be linked to the table CRMD_ORDERADM_H and the related structure
3.Ask the technical team to populate this field from structure COM_DYNP_PARTNER_UI-PARTNER_FCT and COM_DYNP_PARTNER_UI-MAINPARTNER = 0 [(In Transaction crmd_order F1 on employee responsible points to structure COM_DYNP_PARTNER_UI and Mainpartner is a Boolean and hence main partner = 0 means that it is not the main partner ).
4.Add the same field in the search-result as well.
Thanks.
Regards,
Monica.

Hello,
I have looked at wiki below [http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component]
Kindly suggest ways to acheive adding new field in Opportunity Search ( employee responsible which is not the main contact like I mentioned ) which belongs to another component ...Can it be done without coding eg. adding to design layer.
Can you please give steps to do the same.
Thanks.
Regards,
Monica

EEWB - In BP, adding a new field regenerates append structure

Hello,
After adding or deleting a field using EEWB, I have the following issues -
1. The new append structure that was created for BUT000 gets regenerated
2. Field labels get overwritten by field names
3. The order in which the fields were seen on the screen gets altered
Is this a known behavior of EEWB? How to alleviate this?
Thanks!

Thanks for your input Satish!
I searched using the application component suggested and the keyword and it was not very useful.
Some more details -
I created some new fields using EEWB. When you go to transaction BP, the standard tabs are displayed - ex - address, bank data, notes, etc. But now there is a new tab - Customer Data that has my custom fields on it.
In the backend, SAP has created an extend structure for table BUT000 that has these fields in it.
When I go to this extend structure, my fields are there with a ZZ prefix - Ex: ZZFIELD1, ZZFIELD2, etc. If you go to the details of these fields in data dict - transaction SE11, the Field labels - Short, Medium, Long and Heading are the same as the field names. Ex: in the first case, the four field labels will be - ZZFIELD1. I then changed the field labels to something meaningful - Ex: Renter name and rental date. After generating the structure, these labels are then displayed on the Customer data tab. So far so good.
However if I add a new field - ZZFIELD3, then all the label names that I had given (Ex: Renter name and rental date) get erased and replaced by the fieldnames again.
Also the order in which the fields were diplayed gets altered. Ex: earlier the Customer data screen was showing - ZZFIELD1, ZZFIELD2. Now it shows - ZZFIELD3, ZZFIELD2, ZZFIELD1.
I hope I have explained this issue.

Adding a new field and new data item breaks layout

I am adding a new field to a subform and populating it form a .Dat unfortunatly adding this field is causing data outputed to the subform below it to shift down one line on the page when outputted.
This new field is outputted at the top of the form and and the line being shifted are below this.
Below is the field details and the field as it is in the .dat file.
Field:F_PO_NUMBER [1]
Lines: 1 Characters: 20 Angle: 0
In Subform
: Main_Page
Options
: Global
^Command JFPAGE_START
^Undefine global:~^PAGE 1
^define global:SEQUENCE \pic"NUM999999",@D:NUMPAGESPRINTED../\pic"NUM99",@$PAGE../\pic"NUM99",@:JFPAGE_PAGE_OF..
^define global:JFPAGE \pic"NUM99",@$PAGE.. of \pic"NUM99",@:JFPAGE_PAGE_OF..
^GLOBAL Email COLL_TEL_NUM~12345678~^REFORMAT OFF
^GLOBAL F_CURRENCY_CODE
GBP
^FIELD F_PO_NUMBER
^COMMENT R_remit_customer
^FIELD F_REMIT_TO_CONCATENATED
Address
^COMMENT M_INVOICE_HDR_BOX1
^GLOBAL F_TRX_TYPE
Invoice
Now the weird party is if I move the new field in the .dat as below it fixes things and the everything lines up like it should do.
^Command JFPAGE_START
^Undefine global:~^PAGE 1
^define global:SEQUENCE \pic"NUM999999",@D:NUMPAGESPRINTED../\pic"NUM99",@$PAGE../\pic"NUM99",@:JFPAGE_PAGE_OF..
^define global:JFPAGE \pic"NUM99",@$PAGE.. of \pic"NUM99",@:JFPAGE_PAGE_OF..
^GLOBAL Email COLL_TEL_NUM~12345678~^REFORMAT OFF
^GLOBAL F_CURRENCY_CODE
GBP
^COMMENT R_remit_customer
^FIELD F_REMIT_TO_CONCATENATED
Address
^COMMENT M_INVOICE_HDR_BOX1
^FIELD F_PO_NUMBER
^GLOBAL F_TRX_TYPE
Invoice
^FIELD F_TRX_NUMBER
I hoping someone might have an idea of why this is the case as I'm at a loss regarding why its happening.

I may not hit on it exactly, but this sounds like Adobe's processing order.
It wants to process the fields in the order they are in the DAT file.
I have a similar problem with an overflow field, that isnt last in the DAT file,
Read this here:
http://forums.adobe.com/message/2298283#2298283
Now that may not be exactly your issue, but I think its the same inherent problem,
Adobes processing order for the fields/subforms.
I am still trying to resolve my issue, but found the ^field command in the reference manual (Print Agent),
and am wondering if I can use it.

Error While Creating New Field thru EEWB

Hello CRM Experts,
I have found following Error while adding New Fields through EEWB. Can any one help to analyse and give the solution?
It gives Error Log as- System type OLTP with role DEV is not specified correctly. System type OLTP with role DEV is not specified correctly
Thanks for your reply in advance.

Hi Priya,
We are also facing similar error in EEWB. If you have solved this problem, please update thread.
Thanks
Dhanraj

Adding a new field to the Address Data for a business partner

Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
Yusuf

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Error while adding a new field to the Segment in we31

Hi ,
I am getting error when i am trying to add the new field to the cust. segment.
It is released for the adding the new fields i am cancelling the release , but i got a message like this
Error while resetting release of segment 'segment name'.
it is comming from the message class EA and message number 259.
Thanks in advance.
Reagrds,
bharani

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Adding a new field to search of Service Contracts

Hi Experts,
I have a requirement where in to add an existing field i.e your ref (sold_to) your_ref_sold field into the search criteria of Service Contrct .
How to add the field to the Search .
I have few questions here.
1 need I use EEW to add the field to Search but its already existing?
2 If not How to append the Structure crmst_query_src_btil and enhace it with field required?
3 how to implement the BADI crm_rf_search_eew?
Thanking You,
Sree.

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Adding a new field to a Z table

We have a Z table on which we have created a datasource. We have created a virtual cube on this datasource and queries are built on this cube. This setup is present on Dev, Quality and Prod environment.
Now we have added a new field to the Z table in Dev. We will be creating a new Infoobject for this new field and will be adding it in the Virtual Infoprovider and also in the queries.
1. Do we need to replicate the datasource so that newly added field is visible to the datasource? If no, is there any way?
2. When I have to transport this to Quality and Prod, do I have to capture all the components and objects (Table,Datasoure,Virtual Cube Queries)? If no, what should I capture in the transport request?

Hi,
First, you have to regenerate the datasource in order to add the field:
1) Log on to source system (where Z table is stored) and go to transaction RSA6.
2) Select the root node and click Expand (icon with '+' sign).
3) Search for your datasource (you can use the binoculars icon).
4) Click on Change.
5) Verify that the field appears on the list. Make sure that "Hide field" and "Field only known on client exit" options are not marked for this field.
6) Click on Save.
7) Select "Datasource" -> "Generate" (CTRL+S) menu option.
8) Use RSA3 transaction in order to verify the new field appears on test extractions.
Then, to replicate the datasource in BI:
1) Log on to SAP BI and go to RSA1 transaction.
2) Go to "Modeling" -> "DataSources" section.
3) Search for your datasource and right click on it. Select "Replicate metadata" from context menu.
4) Add the new InfoObject to the VirtualProvider.
5) Update the transformation which joins the DataSource to the VirtualProvider.
As far as transport requests are concerned, even though it requires more work, it is a good practice to group objects in different transport requests according to their type:
In the source System (R3 for instance):
1) One transport request with the table.
2) One transport request with the datasource and its structure.
In BI:
1) One transport order with the datasource replica.
2) One transport order with the new InfoObject(s).
3) One transport order with the modified VirtualProvider.
4) One transport order with the modified transformations from the datasource towards the VirtualProvider.
5) One transport order with the Queries and their elements.
I hope this helps you.
Regards,
Maximiliano

Adding a new field to existing structure

HI all
I am adding a new field to the existing structure in BW ,shall I remove all the data in the cube to fill fill this field for the previous records and reload again or any other solution
thanks in advance

Hi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas

CProjects - Adding a new field to the detail screen of object link

Hi All,
I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
Please let me know how could i realise this functionality?
Thanks in advance.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Adding a new field to the selection screen of a LDB

Hi all,
I want to add a new field Clearing date(BSEG-AUGDT) in the dynamic selection screen of the report RFUMSV00.
For adding a new field i have copied the SAP view of a Logical database to CUS view.
Next i had added the Clearing date(BSEG-AUGDT) to the function group Document header(01) and selected the check box Preselect and saved the view.
But still i am not able to find the newly added field in the dynamic selection screen of the report.
Please suggest me where i am going wrong or how to do this.
Thanks in advance
Ajay

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Adding a new field to the search help exit

Hi friends,
adding a new field to the search help exit. How does it work ?
Thanks in advace
Ilhan

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

SAP Work Manager customization - adding a new field to equipment details screen (Syclo Agentry)

Hi Experts,
I am trying to add a field (NAME1) on the Equipment details screen under work orders in work manager 5.3 application.
I have performed the following steps, but I am getting an error while connecting to the application.
1) Create extension for Equipment class to add a new field.
2) added the new field (Name1) as the property to the standard object Equipment.
3) Added the field on the screen.
4) Added the field (name1) to the complex table ctEquipment.
5) Added the JAR file to Agentry.ini file.
6) Changed the Class mapping for parameter "Equipment" under group "SAPOBJECT" to point it to the custom (Extended) class.
7) Changed the class mapping for complex table parameter "ctEquipment" under group "CT_SAPOBJECT" to point it to the custom class.
8) after publishing the changes and re-starting the server, I get following error.
the log file generated (message.log) also has the same description.
What am I missing here? Any help would be really appreciated.

Hi Emanuel,
Thanks for looking into this issue.
I have performed the following steps as suggested by you, still it doesn't seem to work and gives the same error.
Below are the changes done on the ECC Side.
1) Copied the standard equipment class /SYCLO_CL_PM_EQUIPMENT1_DO to custom class ZSYCLO_CL_PM_EQUIPMENT1_DO. Changes made in the GET Method to get custom equipment related data
2) Modified the standard equipment structure /SYCLO/PM_EQUI_STR by adding one custom field
3) Configured this custom class as the object handler in the equipment mobile data object
4) Configured this custom class as the object handler for the equipment complex table
5) We are still using the standard BAPI Wrapper itself for getting the equipment data and the added field is reflected in the BAPI Wrapper table parameter
Is there something we are missing?

Adding a new field in EEWB and pulling this to IC 4.0

Similar Messages

Maybe you are looking for