Adding a new graphic in Flash

Hello all. Very new on the Adobe Flash scene. I'm trying to
figure out how to add a graphic of mine to a flash. I'm pulling my
hair out. I have several templates in flash and can modify these at
will, but they already have existing graphics; It's a snap to
import my own.
How do I create one of my own? I think they are called
symbols? I can create one of those, layers all that. How do I get a
graphic into those?
Thanks for the help. I hope to learn a great deal from
here.

File -> Import -> Import to Library and then navigate
to where your .psd is.
http://livedocs.adobe.com/flash/9.0/UsingFlash/help.html?content=WSC23C276E-0FD8-426e-B29B -742122476BC0.html

Similar Messages

Speaker problem with t420i and adding a new graphics card question

I bought a t420i about a month ago and noticed that the speakers could not properly handle muliple sounds at once. What happens is that, say in a music video, the music plays loud and clear, but once the lyrics start the background music fades a bit to about 85% of it's original volume. I had returned the laptop because of this problem but the replacement I got has the SAME exact problem.
In case im not clear, try this example. You know the beeping noise you get when you press an incompatible set of keys? ( like g, h, and b). When I have this noise going simultaneously with a song, the song's sound fades a bit.
This does not happen with headphones, therefore i believe the problem is with the way the speakers are programmed.
Also, if I bought a t420 with just integrated graphics, could I still add a new graphics card? Or can you only add a new graphics card to a thinkpad that initially comes with discrete graphics?

I think the main purpose of the nvs4200m is the ability to use three displays (internal + 2 external). Additionally, nVidia has better driver support for games so even though it is around the same speed, the drivers are better.
The shared ram is still used, unless you disable the HD3000 in the BIOS and run with only the nvs4200m at all times.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

When adding a new graphic card the computer stuck when i see the hp logo.

wats in my pc:
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
NVIDIA GeForce GTX 550Ti (old one)
Pegatron IPISB-CH2
BIOS Version/Date AMI 7.12, 12-10-2011
memory 3X 4GB PC3-10600(DDR3-1333)
SSD Samsung evo 850 500gb &
HDD HP 2TB 7.2K RPM SATA 3.5 Inch HDD
Power HP PSU 460W Bordeaux-C (Active PF
I've now updated my grapic card to a ASUS STRIX-GTX970-DC2OC-4GD5 (new one)
When i put the grapic card in the system won't start i get a blue screen with the hp logo, and could not get into the boot menu or anything.
Anyone has a solution for me, i'm desperate now.

Hi,
And the old "NVIDIA GeForce GTX 550Ti " only uses 116W, it needs only 400W PSU minimum:
http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-550ti/specifications
>> ASUS STRIX-GTX970 this one uses 225W.
Only for the card itself, you have to run OTHER COMPONENTS of your computer. Just make a calculation:
Your machine has 460W to run a 116W video card, now you uses 225W video card or 225W - 116W = 109W more, you need 460W + 109W or 570W PSU.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Adding a new graphics card

I have a first generation 1.8ghz Power Mac G5 with Final Cut Studio installed. I want to upgrade my graphics card so I can add some plugins as well as FCStudio2. What are my options for a good graphics card? I am currently working in SD but sometime in 2009 I want to switch over to HD.
Any suggestions would be cool.
Thanks.

I am assuming that your G5 is AGP architecture, a bit long in the tooth, but you should figure this out, I know Apple.com/support has specs listed for legacy machines somewhere.
I don't like to buy anything from this retailer but they do have a nice section to tell you what is available for your particular machine. http://www.macsales.com/

Flash movies makes horrible "flickering" sound with new graphic card!

I just bought a Gigabyte GeForce 460 GTX 1GB and now when I watch Flash movies
the movies makes a really bad "flick" flick" "flick" sound. If i scroll down and away from the actuall movie screen
the bad sound stops and the movie plays normally. But soon as I scroll up to the movie the sounds starts again.
Can't stand the bad sound quality anymore!
I tried latest Firefox & Internet Explorer.
I tried uninstall both flash and drivers then reinstall with the latest updates.
I tried searching the web for solutions.
My PC:
HP Pavilion
Intel Pentium 4 CPU 3.60GHz 360GHz
Memory: 3 GB
System type: 32 bit
Windows 7 Ultimate
My new Graphic card:
Link
Thanks for the help!

Hi, We'll have to continue later. From Adobe:
Due to system maintenance with Adobe.com, the log-in and authentication for the Adobe Forums will be temporarily unavailable for approximately 3 hours on Saturday, Sept. 11, 2010.
Maintenance will begin at 7:00 pm PST and will be complete by 10:00 pm PST. During this time, the Forums will be in Read-only mode.
We apologize for any inconvenience. Thank you.
by Mark Nichoson at Sep 7, 2010 10:02 AM
Expiring the announcement will not delete it but will remove it from the public announcement list. Are you sure you want to expire this announcement?
Are you sure you want to delete this announcement?
For my Time Zone, that is in about 10 minutes. EDT for me. 10PM PST
eidnolb

Colors in other graphics turn dull when placing new graphics

When I place a new graphic on a page, the graphics in other images turn dull.
I just now placed a new graphic on a page (a grayscale tif), filled it with a color, applied a transparency effect, and immediately an adjacent graphic's colors turned dull, as if shifting from rgb to cmyk.
Is this supposed to happen? Have I missed something?
InDesign CS6, MacOSX Mountain Lion.

Adding transparency does, indeed, affect the entire spread. If everything is RGB, set the blend space to RGB, Edit > Transparency Blend Space > Document RGB.

I just really need to know... After desigining my UX, how do I go about adding the image into ADOBE FLASH BUILDER to script on top of it?

I just really need to know... After desigining my UX, how do I go about adding the image into ADOBE FLASH BUILDER to script on top of it?
Any and all advice is welcome.

Do you have different versions of the graphic novel pages, or is there just one version of the page? If there is one version, can you crop into the page without losing anything important?
I would guess that there is one version, and that cropping into the page will lose something important. If that's the case, here's how I would handle it:
Make a stage that is 14:9. The size doesn't matter, but 1400x900 could be a good starting point.
Put down a background texture that fits well with the look of the other images. Make that fill the 1400x900 stage.
Place your page graphics so that they are within the center 1200x788 area of the stage.
Set the stage scalemode to "noBorder".
You now have a layout that will work on all devices, as narrow as iPad, and as wide as iPhone 5. All without any code. On the widest devices you'll see a bit of your background pattern to the left and right of the page graphic. On the narrowest devices you'll see a bit of background pattern above and below the page graphic. But you won't lose sight of anything important.

Need new graphics card

I am using Premier Pro on a 2012 mac pro 5,1. Any recommendations on a new graphics card that can keep up with Premier?

I would suggest a 680GTX Mac card or get one of the 770GTX cards that are flashed for Mac which you can find online.
Eric
ADK

Move Graphic to Flash with Anchor Points

I created a graphic in Illustrator CS5 that I want to use in Flash CS5. How do I move the graphic to Flash and preserve the anchor points of the graphic so I can use them in Flash? I have used the Import to Library function in Flash but once the graphic has been imported the anchor points are gone.
Here is some background in case I'm trying to do it incorrectly. I have a speech bubble I created in Illustrator. Now I need to use this speech bubble in a Flash animation but the bubble will need to resize according to how much text will be placed in it. I can't just change the width and height of the bubble because that will make certain parts like the edges to big. I need the bubble to "grow". In Illustrator I can do this by select certain anchor points and moving them without effecting other points. But in Flash I'm not sure how to accomplish this.

Thanks for the reply. I just did some reading on 9 Slice and that is actually what I need. Unfortunately it is not working correctly in Flash CS5 with my Illustrator graphic.
I setup 9 Slice in Illustrator and it works great in Illustrator. I can resize my graphic and only the parts I want resize. Then I saved the Illustrator file and tried importing it into Flash CS5 and I see the 9 Slice lines but when I resize the graphic 9 Slice is not working. I tried creating a simple box in Flash with curved edges and 9 Slice worked with it.
Is there something special I need to do to get 9 Slice to work on my imported Illustrator graphic? I tried creating new 9 Slice lines in Flash as well but that never worked either. Am I missing something?

Which New Graphic Card For 2008 Mac Pro?

I'm going to buy Final Cut X, so I'll need a new graphic card for my 2008 MacPro. My current card is an ATI Radeon HD 2600.
I asked AppleCare and they sent me a link to a lot of compatible cards (copied below).
But it turns out that most of these cards need Windows - at least according to specs - and the rest don't have the (2) DVI-D connections I need - so which card should I buy?
The card has to work with my 2 Acer P243W 24" screens at 1920 x 1200 @ 60 Hz.
Here's Apple's list:
•    NVIDIA
o    GeForce 320M
o    GeForce GT 330M
o    GeForce 9400M
o    GeForce 9600M GT
o    GeForce 8600M GT Note: OpenCL compatible, but does not meet system requirements for Final Cut Pro X, Motion 5 and Compressor.
o    GeForce GT 120
o    GeForce GT 130
o    GeForce GTX 285
o    GeForce 8800 GT
o    GeForce 8800 GS
o    Quadro FX 4800
o    Quadro FX5600
•    ATI
o    Radeon HD 4670
o    Radeon HD 4850
o    Radeon HD 4870
o    Radeon HD 5670
o    Radeon HD 5750
o    Radeon HD 5770

Once you look at what is sold, limits the list. None of those listed require Windows though. What specs? I don't see any specs. And of course nothing listed are Windows, that would be strange. Why you pasted notebook and iMac graphic adapters... unless Apple is selling FCPX for Windows.
Forget the GT120 though some use it with FCPX and are okay with it, save a little though I think 5770 has more processing, bandwidth and of course 1GB DDR5.
support for 6870 PC card is looking like a possible option now, too.
It is more mainly just 5770 vs 5870. Or Quadro 4000.
Amazon has PNY Mac Pro edition $790 vs Apple's $1195 for same card
PNY Quadro 4000 2 GB DDR5 Mac Pro
When FCX came out we had a couple threads on same topic.
Apple Graphics Cards
OSX and Graphics Cards
Radeon 6870 3DMark 30% gain on 5870
Flashed PC Radeon HD5870 Mac Pro 2008
Flashed PC Radeon HD5870 Mac Pro 2008 - dual DVI works
I include the above for same reason why when the 4870 came out, PC card was 1/2 price and $450 for 5870? really? when XFX and Saffire are under $199.
Radeon 5870 vs 5770 GTX 285 4870
Three Video Displays one card
Display Adapters Needed

IdeaPad S205: BIOS/EFI menu not accessible after adding a new boot entry using the bcfg command

Hi community,
I just got a new S205 and wanted to install Win7 and archlinux in dual boot (GPT formatted SSD).
Win7 installation worked like a charm. Archlinux worked well aswell, unfortunately i couldn't make a boot entry following this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide#EFISTUB
So i had to manually create the boot entry using bcfg command in an efi shell:
https://wiki.archlinux.org/index.php/Unified_Extensible_Firmware_Interface#bcfg
The first attempt (I double checked that i got the right filesystem [fs0] and so on) failed and resulted in an automatic reboot. After this I immediately reentered the efi shell and tried again. This time I could create the boot entry.
Now if I reboot everything seems fine (I can dual boot Win and arch) BUT I cannot access BIOS/EFI menu via F2 anymore. It seems like it just does not exist anymore. How do I get it back? Should I just flash over with the original EFI from the Lenovo download page? I could theoretically do that (I can still change boot order using my arch live medium), but i could not reset EFI prior to flashing... which is always recommended to do.
So I am - again - pretty stuck with this EFI. I hope you can help and tell me what to do.
This EFI-Implementation on the S205 must be the worst piece of "engineering" ever.
Nothing works the way it is intended to... I would not dare to wash my hands clean off any faults, but ADDING a boot entry resulting in a not accessible BIOS/EFI menu... there's just something wrong.

At least I now know what the problem is:
It seems like the S205 can only keep 7 boot entries in NVRAM (Can anybody concern?).
As I already have 7 boot entries:
adding a new entry using efibootmgr tool does not work (fails without error) and gummiboot doesn't work either. Nevertheless, adding a boot entry (for rEFInd) from within the UEFI shell works, but seems to result in deleting "Boot0000" aka Setup which then breaks my EFI. Breaking meaning that I cannot access it anymore.
I can however (and did so twice yesterday) flash the original EFI from within Windows and thus gain access to the EFI menu again. Nevertheless this resets my boot entries again so the refind (or gummiboot) bootloader gets deleted again and only Win7 is bootable.
Now what would be the smartest way to dual boot this system? Which of the boot entries is safe to delete so i could install refind/gummiboot instead? For instance, I don't know where USB FDD and USB CD come from. Can I delete them? Or won't I be able to boot from external CD-ROM or USB drive anymore if I delete them?
Or would it be best to delete the Win7 bootloader and try to have refind/gummiboot boot it? And will they at all be able to still find the Win7 boot files once I deleted Win7's boot entry? When I install refind as bootloader and manually add an boot entry for it using the bcfg boot add command it is able to load Windows7. But will this still be possible if I delete the Win7 boot entry? It would most likely be possible - I assume - if the Win7 boot files (on the EFI system partition) were still there even after deleting the boot entry. Can someone tell me how deleting a boot entry exactly works and which files get or don't get deleted?
Best regards.

Need guidance on new graphics card connectivity.

Hey,
I want to upgrade my current graphics card "ATI Radeon 4800 Series" to a newer more capable graphics card mainly for gaming. (Black Ops is coming out tomorrow and I feel it's time for an update)
My current PC specification is as follows:
Harddrive: 500GB
RAM: 4GB
CPU: Intel Pentium Dual Core 2.80GHz
Motherboard: GF 7050V-M7
PSU: 650W
Graphics Card: ATI Radeon 4800 Series
Operating System: Windows XP Service Pack 3
I need your help to find me a new graphics card that it is compatible with my motherboard/other components at around £130!
Thanks for your time!
Hatton

You need to re-read what I said... I said if he wanted to build a new computer based on a new motherboard, I did NOT say this would be a pop-in replacement for his existing motherboard
There are several ASUS models, I picked the P6T SE since it had the right balance of features and price
I have 6x2Gig ram sticks for 12Gig... if I was building today, now that prices are lower, I would start with 3x4Gig to leave room for adding 12Gig later
I use the onboard sound and it works fine for my needs
As well as an nVidia GTX285 (today, I would buy a GTX470) I have a Pinnacle Dv500 digitizing card, which I use via dual-boot with WinXP

Problems with BIOS for new graphics card!!! HEEELP!!!!

Hello,I just recently received my new graphics card (Gigabyte GeForce GTX 960), and I am having some troubles getting it to work with my computer (p7-1072sc). I go myself a new PSU (Crossair CX600M), istalled it properly, pluged all the components up and put in the new GPU. Every time I turn on the PC, it freezes at the blue HP loading screen and does not respond to any keys.After some google searching I found out that I most likley would have to update my BIOS, so I went to the HP homepage. Entered my modelnumber, downloaded the new BIOS update (My current version was 7.14 13.10.2011), the update said the version was 7.15 05.25.2013. I downloaded the exe file, closed all other programs and ran the file. I started out as normal, but as the main installationprocess started I got the message that hpprobar3 stoped working. The computer freezed for a short while and then I got the message that the new BIOS had bin successfully installed, so I restarted the comuter. After that I checked back on the systems information and the version had bin changed to 7.15, but the date was still 13.10.2011. I tried the same rpocess again and the same thing happened. I ried again to put in the new GPU, and it still froze on the blue HP loading screen. I also tried to find the directory for the BIOS file (sp55548.exe) (to make a flash installation), under c:/swsetup, but I only found one folder named sp68021. Can anyone help me with this?? I would really appreciate any advice sort of advice!!!
PS: I am pretty new to all this stuff, so please be patient and explain any technical informoation or terms.

As stated before, and as a refresher. I just got off the line with MSI and EVGA. What you have is a Legacy motherboard. It can not function with a UEFI BIOS graphic card. That said:MSI (Greg): The 750Ti NF has a switch for Legacy/UEFI. All others in the 700 series are UEFI. The 900 series, plus the R7, R9 ship with the new VBIOS, a hybrid that detects the correct BIOS (Legacy/UEFI). EVGA (Kayon): All 600 and 700 except the 750Ti are Legacy.

I want to use the new graphics declarations to draw a bunch of 5px wide circles onto this canvas

I'm learning this FB 2 IDE.
Could someone help me out here for a project I want to do.
Basically what I have is this
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                xmlns:mx="library://ns.adobe.com/flex/halo" layout="absolute" minWidth="1024" minHeight="768" width="432" height="382">
    <fx:Declarations>
        
    </fx:Declarations>
    <mx:Canvas width="100%" height="100%" backgroundColor="#FFFFFF">
    </mx:Canvas>
</mx:Application>
I want to use the new graphics declarations to draw a bunch of 5px wide circles onto this canvas but I don't know how. I want to evalve this into a strategy game
Any code tips would be appreciated
Is Canvas the best choice to draw stuff onto?
looking forward to your input and help as this app grows

Thanks very much so far, awesome code:)
I now have added some animation and logic.
If compile this and press start animation you will see what I mean
I would now like to draw a line from every gray ellipse to every blue ellipse but am not sure of the best way to do this using fxg.(connecting centers and behind the ellipsis)
Would love some expert advice
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/halo">
    <s:creationComplete>
        <![CDATA[
        setupScene();
        ]]>
    </s:creationComplete>
    <s:controlBarContent>
        <s:Button label="start Animation"
                  buttonDown="startAnimation();" />
        <s:Button label="stop Animation"
                  buttonDown="stopAnimation();" />
    </s:controlBarContent>
    <fx:Script>
        <![CDATA[
            import mx.collections.ArrayCollection;
            import mx.core.IVisualElement;
            import mx.graphics.SolidColor;
            private var FPS:uint = 20;
            private var delay:uint = 1000/ FPS;
            private var repeat:uint = 100;
            private var myTimer:Timer = new Timer(delay, repeat);
            private var blueTeam:ArrayCollection = new ArrayCollection();
            private var blueLeaders:ArrayCollection = new ArrayCollection();
            private function startAnimation():void{
                myTimer.addEventListener("timer", updateState);
                myTimer.start();
            private function stopAnimation():void{
                myTimer.stop();
            protected function setupScene():void {
                for (var i :int = 0;i< 8;i++){
                    var c:bCirc = new bCirc();
                    c.x = uint(Math.random() * 400); // random X position
                    c.y = uint(Math.random() * 300); // random Y position
                    blueTeam.addItem(c);
                for (i = 0;i< 2;i++){
                    var c2:bLeader = new bLeader();
                    c2.x = uint(Math.random() * 400); // random X position
                    c2.y = uint(Math.random() * 300); // random Y position
                    blueTeam.addItem(c2);
            private function updateState(event:Event):void{
                for each (var o:IVisualElement in blueTeam ){
                    o.x ++;
                for each (o in blueLeaders ){
                    o.x ++;
                render();
            private function render():void{
                //clear all items from displaylist
                removeAllElements();
                for each (var o:IVisualElement in blueTeam ){
                    addElement(o );
        ]]>
    </fx:Script>
    <fx:Declarations>
        <fx:Component className="bCirc">
            <s:Ellipse width="30" height="30" alpha="0.8">
                <s:fill>
                    <s:SolidColor color="0x0000ff" />
                </s:fill>
            </s:Ellipse>
        </fx:Component>
        <fx:Component className="bLeader">
            <s:Ellipse x="0" y="0" width="30" height="30">
                <s:fill>
                    <s:LinearGradient x="0" y="0" rotation="90">
                        <s:entries>
                            <s:GradientEntry color="#FFFFFF" ratio="0" alpha="1" />
                            <s:GradientEntry color="#000000" ratio="1" alpha="1" />
                        </s:entries>
                    </s:LinearGradient>
                </s:fill>
            </s:Ellipse>
        </fx:Component>
        <fx:Component className="RCirc">
            <s:Ellipse width="30" height="30" alpha="0.8">
                <s:fill>
                    <s:SolidColor color="0xff0000" />
                </s:fill>
            </s:Ellipse>
        </fx:Component>
    </fx:Declarations>
</s:Application>

Error while adding a new col with check constriant

Hello
I tried adding a new column with check constraint but giving the error please correct me..
drop table testchk
create table testchk(typenm varchar2(5))
insert into testchk values('mon')
alter table testchk add typechk varchar2(5) default 'both' constraint chk_test check(typechk in('m','d') and typechk is not null)For the alter comman getting the ORA-02293 cannot validate error..
I dont want to create any other constriant like not null etc .. but need only one check constriant
Thanks

You cannot assign a default value = 'both' while the constraint allows only 'm' or 'd'.
This will work:
ALTER TABLE testchk ADD typechk VARCHAR2(5) DEFAULT 'both'
CONSTRAINT chk_test CHECK(typechk IN('m','d', 'both') AND typechk IS NOT NULL);Edited by: kordirko on 2010-05-14 18:41

Adding a new graphic in Flash

Similar Messages

Maybe you are looking for