Adding a new layer at the beginning

I have created a flash file with 5 pictures, i wish to add a additional picture at the beginning (not the end) of the time line.
Is there an easy way to insert this new image and move all the other images down along the time line so the new immage apopears first?

Hi ,
In order to implement the appropriate moves you have to use the key combinations : 1) <shift>+<ctrl>+'<' for deletion of the current list item(where the cursor is located)
2)<shift>+<ctrl>+'>' for appending a blank row in order to add a new element...
Regards,
Simon

Similar Messages

Adding a new value at the beginning of the list

Hi,
I've a list of values which are hard coded in the 'Elements in List' property for a Combo Box. Now, I want to add a new value at the beginning of the list. It doesn't allow me to add one. I have to delete all values and re-enter from the first which includes the new one. Is there any way that I can add a new value at the beginning of the list without having to remove other values.
Thanks in advance.
-- Srinivas

Hi ,
In order to implement the appropriate moves you have to use the key combinations : 1) <shift>+<ctrl>+'<' for deletion of the current list item(where the cursor is located)
2)<shift>+<ctrl>+'>' for appending a blank row in order to add a new element...
Regards,
Simon

Can I add a new trigger to the beginning instead of at the end of a blank composition widget?

Hi guys,
I am creating a photo gallery page using the Blank Composition widget. I want to be able to add new content regularly by adding new photos to the top (beginning) of the gallery so my newest photos show at the beggining of the gallery.
Currently, the little + symbol to add another trigger only adds a new trigger to the right (bottom) of group of triggers, effectively putting newly added content to the back of the gallery instead of at the front. Am I able to get it to add a new trigger to the beginning of the group and have that trigger be the first in the group to display?
All the widget's seem to display this same order behaviour, so I'm quite stuck on how to get around this. I've tried re-arranging the triggers, but that has become insanely cumbersome every time I want to add new photos to the beginning of the group and move the older ones further down the gallery order.
Any help would be greatly appreciated with this, cheers, David.

OK
I'm a newbie.
I have the same problem. I've looked at some recommended 3rd party widgets and they don't do what I want either.
Another method would be to start a nabble.com blog and embed that in to Muse, but then the news would not be seen by web crawlers and benefit your ranking on your own page. (I think)
This is a rubbish work around but, I'm going to add a new news widget every month. I only get 5-6 bits of news a month, so by adding a new widget above the last each time, that will push the old news down the page.
Hope this helps someone.
Jay

Add a new line at the begining of a string in a Xquery ALSB3.0

Has anyone figured out how to Add a new line at the begining of a string in a Xquery in ALSB3.0?
Thanks for your Help.

I believe this is related to BI Publisher. Any comments would be greatly appreciated.
Thanks,
Sinan

CProjects - Adding a new field to the detail screen of object link

Hi All,
I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
Please let me know how could i realise this functionality?
Thanks in advance.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Adding a new field to the search help exit

Hi friends,
adding a new field to the search help exit. How does it work ?
Thanks in advace
Ilhan

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Adding a new field to the Address Data for a business partner

Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
Yusuf

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

ADDING A NEW ITEM IN THE CREDIT REQUEST DETAILS PAGE.

Dear friends,
Please help me with this scenario.Thanks so much for your help.
Task: ADDING A NEW ITEM IN THE CREDIT REQUEST DETAILS PAGE.
Need to create a new item on this page called "approver notes" (column notes).
Can this be achieved by personalization?
Scenario:
On credit request details page disputed invoice number, request date, status, bill to, ship to, etc are displayed.
When the status is "not approved”, item should be displayed along the "rejected" comment.
If the status is other than "not approved" then the item should not be displayed.

what page is this ? are you sure it is a OAF page ?
If it is a OAF page, you would need to extend the controller to fire a partial action for the item and then control the display property of the comments field
Tapash

Adding a new server in the menu of SAP GUI 640

Hello Everybody,
While adding a new server to the menu of SAP GUI 640 using Server Tab after entering all details like :
1] SAP System ID
2] Hostname where message server is running
3] SAP ROUTER :None
After filling all the above details and after pressing the Generate List Button I am getting the following error .Please help me to know why this error is coming and suggest a solutio for adding a new server to my SAP GUI 640.But I am able to add a new server using User defined tab but I want to add a new server using Server tab.
Below is error details which I am getting:
Error:service'sapmsSBX'unknown
Wed Jan 09 06:41:13 2008
Release 640
Component NI(network interface),version 37
rc=-3,module ninti.c,line 463
Detail NiPGetServByName: service 'sapmsSBX' not found.
Thanks and Regards,
Ashish Thakkar.

Hi,
check etc/services for sapmsSBX entry. If missing - add it (i.e. sapmsSBX 36XX/tcp - where XX is your instance no.)
Add an extra [Enter] after last line of etc/services.
Regs,
FS

Could not make a new layer from the selection because the selected area is empty

I have Photoshop CS5 and I'm trying to do a selection on a new layer and when I copy it this message appears: "could not make a new layer from the selection because the selected area is empty"..
The new layer is selected, no other layer is selected. What the hell am I doing wrong???....Yes I'm a beginner.. ....please help?

Hi There,
So just to clarify you have made a new blank layer, made a selection on that layer and then done a Layer > New > Layer via Copy (or cmd J).
The reason that you would get this error message is you have made a selection on a blank layer (effectively selecting nothing) and tried to duplicate it and Photoshop won't let you do that.
When doing New Layer via Copy or New Layer via cut you selection needs to include some painted (coloured) pixels.
Regards
Paul
PS. Maybe you could explain what you are trying to achieve by copying the layer and I could help a little more.

PLACING NEW LAYER BELOW THE ORIGINAL

How do I open or place a new layer BELOW the ORIGINAL. I have tried dragging and that doesn't work. I have tried control/click when I create a layer and that doesn't work. I have seen it done on a video tutorial but I can't remember how they did it.

"...
You wouldn't believe how many places I have asked this question and everyone kept telling me to DRAG the layers but of course the background layer was locked..."
Ohhhh, YES, I would believe it! :D LOL! I can't tell you the # of times I did something similar and could not, for the life of me, figure out why "photoshop wasn't working"! :P
Then my eye spotted the lock on the layer... hahahah!!
GLAD you got this sorted, (and even MORE glad that someone besides me had this 'problem'!) ;)

Error while adding a new method to the Session Bean

Hello everyone. I'm using jdev 11g, ejb, jpa & jsf. Everything works fine. But when I try to add a custom method to the Session Bean, I'm having an error.
Here is my steps:
1) I added a new method to SessionBean.java. Something like this:
public void Hello() {
System.out.println("Hello!");
2) Then using Structure palette I exposed this method through Local interface and created data control
3) Finally, I made a command button binded to this method (just droped it from DataControls.dcx to my page)
When I start the page and click the button, I'm having the following error:
Error 500--Internal Server Error
javax.faces.el.EvaluationException: Method not found: Hello.execute(javax.faces.event.ActionEvent)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1227)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:70)
... (I've truncated the log because there is nothing important in the missing part)

Yes, I have binding in the page def. Everything is correct there:
<methodAction id="Hello" RequiresUpdateModel="true" Action="invokeMethod"
MethodName="Hello" IsViewObjectMethod="false"
DataControl="PriceServiceLocal"
InstanceName="PriceServiceLocal.dataProvider"/>
I've droped the method from the Data Controls panel

Error while adding a new field to the Segment in we31

Hi ,
I am getting error when i am trying to add the new field to the cust. segment.
It is released for the adding the new fields i am cancelling the release , but i got a message like this
Error while resetting release of segment 'segment name'.
it is comming from the message class EA and message number 259.
Thanks in advance.
Reagrds,
bharani

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Adding a new StepType to the TypeUsageList is SLOW

Hi,
from code (C#) I'm creating a new new StepType, using the engine.NewStepType() method.
Before adding this StepType to my TypeUsageList, I'm changing some properties, like IconName, DefaultNameExpr, DescriptionExpr,...
And also the Name property is changed, but here is my problem: when doing this from Visual Studio (while in debug mode) it takes a long time to perform this. Running my app as a stand-alone (exe), and it goes (realtive) fast.
I've to add about 50 new StepTypes at once, doing this from Visual Studio takes about 30 seconds, from exe, about 3 seconds.
Is there something that I'm missing here ?
Using VS2010, C# 4.0, TS 2012 f1.
TIA
Franky

Hello Franky,
I must say that this is a big difference between both.
But it does seem normal that the Debug Mode takes longer than the release mode.
I think you already know this, but to provide a quick recap:
- Debug Mode: executable will contain debug information which will make it slower.
- Release Mode: executable will not contain Debug information, which will by default cause better performance.
However, the major difference will be that many (if not most) of optimizations are turned on in Release Mode, but not in Debug Mode
On the msdn fora there are many threads about these differences:
http://social.msdn.microsoft.com/Forums/en-US/csharpgeneral/thread/74db169a-e244-496e-ae97-8dfec18ff...
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

Error 1430 when adding a new VI to the program

I have a program I developed in LV 2009 in 2009 and now I am updating it. I accidently opened it up in 2010 and saved it. There are Microsoft office tools that were built into LV 2009 that are removed in 2010 that I had used in my program. So I had to save as previous version (2009). After everything worked and I could run the code and compile I continued developing. At one point I tried to compile and got an Error.
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1430 occurred at Create Folder in Create Directory Recursive.vi->AB_Destination.lvclass:Create_Destination.vi->AB_Build.lvclass:Create_Destinations.vi->AB_Application.lvclass:Create_Destinations.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi->AB_UI_FRAMEWORK.vi->AB_Item_OnDoProperties.vi->AB_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: The path is empty or relative. You must use an absolute path.
<Not A Path>
I have now figured out that if I add a new VI to the program, it gives this error. If I remove the VI, it compiles with no errors. If I add a blank VI with no code, it gives the error. I have worked as far as I could without adding a VI but now i need a pop up window and need to the VI. The code is too large to fit the max 6MB requirements.
Thanks
Matt
Solved!
Go to Solution.

Hi mattyk,
When you say compile, do you mean press the run button? When exactly does this error show up?
I suggest you try copying all of your VIs into a new project, and try running the new project. It sounds like your project may have been corrupted in the process of upgrading and re-saving to a previous version.
I hope this helps! Regards,
Emily C
Applications Engineer
National Instruments

Adding a new layer at the beginning

Similar Messages

Maybe you are looking for