Adding a new link to workcenter group

Hi
I have to add a link of 'competitors' to the UI in the accounts workcenter group. I have created a component for the competitors but am not able to make out how do i link it to the 'Accounts' workcenter group.
Can anyone help me out please.
Thanks and Regards,
Radhika

Hi Radhika,
if your requirements are not matched by customizing the navigation bar/ workcenter you have to enhance the worcenter page. For this you need an enhancement set. Then enhance the standard component. There go to the runtime rep. editor:
1. add component usage
2.assigne your component to viewset
3. goto browser component structure and configure the view
Prerequisites: Please check your component if you have created a component interface in the runtime rep. editor and if your view is already added to the MainWindow of your component (browser componet structure).
Best Regards
Michael
Edited by: Michael Kiesel on Jul 29, 2008 3:22 PM

Similar Messages

Adding a new link in R12 registration page

Hi All
Shall you please send me the steps for adding a new link in registration page in Oracle istore R12
Thanks

Hi;
Please check:
http://docs.oracle.com/cd/E18727_01/doc.121/e13575/T349071T350482.htm
How To Disable The "New User Registration" Link In Istore [ID 1224813.1]
Regard
Helios

Adding a new link to Detailed Navigation

Hi,
I have created a new iview, now I have to display this iview in MSS by providing a link in the detailed navigation of the MSS role.
Can you tell me how add a new link in the detailed navigation iview ?
Regards
Bharath

Yes, For finding the appropriate Workset, In User administrator, check what all roles and Groups are assigned to the user. This will have the PCD path of role aswell. Once PCD path obtained, Open the Role and Via "Trace delta link" option find the approproate MSS role and Workset. Open MSS workset or Role, and Add your iview.
if it doesn reflect even after adding in this, Go to System administration -> navigation and clear all cache and check.
I hope this helps.
Thanks.

Adding a new link in global button bar

Hi,
How can i add a custom link in the global button bar near home, personalize page etc links.

hi Kali,
I have not seen in any responsibility where global links are different. The requirement was to show the custom global link only on my custom pages which are accessed via custom responsibility. That's why i asked that question of showing global link for the responsibilty. I should have asked how to display custom global link only on a custom page and not on seeded pages. I went thorugh the dev guide and found that we can assign the property global menu of the page layout to display custom global links only for that particular page. I created a new global menu with one function. I assigned the global menu to all my custom pages. So now i am able to see the custom global link on all the pages accessible through my custom responsibility. My problem is solved now. Thanks for replying.

Workcenter group link to call URL in new browser

Hi,
using the transaction launcher i configured a workcenter group link to call an URL in a new browser window.
This works.
The requirement is now that in the CRM L-shape the opened workcenter should stay.
At the moment to workcenter is gone at the moment i click this external URL link for the new browser window and i have to navigate back.
Any ideas on this?
Thanks a lot.
Kind regards
Manfred

Hi,
thank you - i know the stateful flag and used it.
But i want the current CRM workcenterpage to stay and not to change.
Thank you
Kind regards
Manfred

CProjects - Adding a new field to the detail screen of object link

Hi All,
I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
Please let me know how could i realise this functionality?
Thanks in advance.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How to hide, disable or delete "Add a new Link"?

Hello Community
    Using Sharepoint 2010 Server and the UI you can create a link on a page
and if you click the link a page comes up where you can add numerous links
with its corresponding url by clicking "Add new link" on the bottom.
    The users shouldn't be able to create their own links and urls the user
should only be able to select link that was put on the page for them to select. Also there is
as checkbox associated with the link and on top of all of them there is a column
heading with a checkbox too and if you click the checkbox with the column heading the ribbon exposes
a tool to create a new item and create a new folder.
    How can you prevent the user from creating their own link and exposing those selections
on the ribbon when the checkbox is selected on the heading?
    Thank you
    Shabeaut

Hello John from Cinncinati
    Okay.
     Surrounding the Ribbon I added:
         <SharePoint:SPSecurityTrimmedControl PermissionsString="ManagePermissions" runat="server">
          </SharePoint:SPRibbon>
    I was able to use it because now if a "List" is clicked on the page no Contextual Tab Group appears
which is where all of the List's properties are made available to the user.
    It fitted in this scenario because although it removed the navigation button (the navigation button wasn't
needed here because that page was the entry point) it left the graphic design still intact.
    With respect to a List, when you want to replace Quick Launch with your own links, from Site Actions,
More Options, "List" you can add a link which when clicked takes you to a page where you can create sort of
as many links as necessary one underneath another with their own url corresponding for each.
    The problem is underneath the last link there is a "+" sign followed by "Add a new Link" but you don't want the user
to click on that "+" sign because this is your sort of "menu" of links that you gave the user to select from.
    That means I still have one problem although the <SharePoint:SPSecurityTrimmedControl got rid of the
Contextual Tab Group properties, when the user clicks a link and see the list of links I provided the "+" sign is
still there so the user can still create their own links.
    If we are on the same page now, do you have any idea how to get rid of that "+" sign with the "Add a new link" at
the bottom of the links?
    Thank you
     Shabeaut

Adding a new account in Team Foundation Server

I have a problem with adding of new accounts into Team Foundation Server 2010. I can add a new domain account into group Contributors of my team project without problems but after that I can't see it in the list of available accounts, for example, in the
drop down list 'Assigned To' at a work item page.
The added user can see the project, do check-in and check-out but he can't get access to the project work items. He has got an error
TF201072: A user or group could not be found. Verify that the users and groups used in your work item type definition have been added to Team Foundation Server.
Can anybody help me?

Hi Jovanny66,
Thanks for your reply.
We don’t recommend to edit the TFS database(s) directly, it may cause the unknown issues.
To edit data in TFS Server, we should edit the data through VS, Web Access, TF command or TFS API. Unless there’s an official SQL Server script to edit TFS data which provided by MS.
As you edited the dbo.Constants table to update user’s data, but the user’s data also included in other
TFS tables too, there’s the key connection relationships between these tables, if we update this user’s data in Web Access, TFS Sever will update this user’s data in all the related tables automatically. But you manually edited this user’s data only
in dbo.Constants table, so the edited data not included in other related tables, it may cause the current issue.
For the edit TFS database issue, you need contact a Professional Support Service at
http://support.microsoft.com/select/?target=assistance to gain more support on this case.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I deleted my old email address and added a new one, after my iPhone died iCloud keeps popping up asking for the password of my old email address. I can't remember my password and the account is still gone, it pops up every few seconds. How can I fix this?

I deleted my old email address and added a new one, after my iPhone died iCloud keeps popping up asking for the password of my old email address. I can't remember my password and the account is still gone, it pops up every few seconds. How can I fix this?

If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Is there any hope of apple adding a 're-link with media folder'-type function to iTunes?

Is there any hope of apple adding a 're-link with media folder'-type function to iTunes?
I have 1000s of broken links after installing the latest version of iTunes and updating some files in my media folder. The location of my itunes library has not changed, and all the files are there (I know because I've just waited several hours for the files to be updated by my ultra-slow computer) - by my logic, there should be some menu option that simply re-synchronises with the media folder, just like itunes would do with an ipod - it can't be that hard can it? The only way I can restore a link is by clicking every song (I have over 28,000) and locating the file in the folder that iTunes claims to use as its media folder - the new version 10 option of then using this location to restore all broken links doesn't work because it only looks in the specific album file, and after a couple of times this dialog box no longer even comes up, so I couldn't ask it to do this even if I wanted to. At the moment the only option I can see is to completely wipe iTunes and re-load all my music from scratch - using my tired and over-worked computer this will realistically take around 15 hours that I don't have, and my computer will melt in the process. I wish I'd never tried to 'tidy up' my iTunes library...
PLEASE Apple, how hard can it be to have a function that searches for and restores broken links by itself????? I've told you where the music is - just flipping look for it yourself instead of getting me to do it!

You don't have to re-rip, re-import or re-download all your content. You can clear the iTunes library, either by selecting all in the libary and pressing the Delete key, saying "no" when it asks if you want to remove the files themselves, and then use the Add To Library command, selecting the iTunes Media folder (or iTunes Music folder, as applicable to your situation), and that will add back all your content. It shouldn't take more than a few minutes; if it does, something may be amiss with your hard drive or the library file is corrupted (in which case just delete the library file and re-do the Add To Library command).
Regards.

Adding a new field to a Z table

We have a Z table on which we have created a datasource. We have created a virtual cube on this datasource and queries are built on this cube. This setup is present on Dev, Quality and Prod environment.
Now we have added a new field to the Z table in Dev. We will be creating a new Infoobject for this new field and will be adding it in the Virtual Infoprovider and also in the queries.
1. Do we need to replicate the datasource so that newly added field is visible to the datasource? If no, is there any way?
2. When I have to transport this to Quality and Prod, do I have to capture all the components and objects (Table,Datasoure,Virtual Cube Queries)? If no, what should I capture in the transport request?

Hi,
First, you have to regenerate the datasource in order to add the field:
1) Log on to source system (where Z table is stored) and go to transaction RSA6.
2) Select the root node and click Expand (icon with '+' sign).
3) Search for your datasource (you can use the binoculars icon).
4) Click on Change.
5) Verify that the field appears on the list. Make sure that "Hide field" and "Field only known on client exit" options are not marked for this field.
6) Click on Save.
7) Select "Datasource" -> "Generate" (CTRL+S) menu option.
8) Use RSA3 transaction in order to verify the new field appears on test extractions.
Then, to replicate the datasource in BI:
1) Log on to SAP BI and go to RSA1 transaction.
2) Go to "Modeling" -> "DataSources" section.
3) Search for your datasource and right click on it. Select "Replicate metadata" from context menu.
4) Add the new InfoObject to the VirtualProvider.
5) Update the transformation which joins the DataSource to the VirtualProvider.
As far as transport requests are concerned, even though it requires more work, it is a good practice to group objects in different transport requests according to their type:
In the source System (R3 for instance):
1) One transport request with the table.
2) One transport request with the datasource and its structure.
In BI:
1) One transport order with the datasource replica.
2) One transport order with the new InfoObject(s).
3) One transport order with the modified VirtualProvider.
4) One transport order with the modified transformations from the datasource towards the VirtualProvider.
5) One transport order with the Queries and their elements.
I hope this helps you.
Regards,
Maximiliano

Adding a new field to the selection screen of a LDB

Hi all,
I want to add a new field Clearing date(BSEG-AUGDT) in the dynamic selection screen of the report RFUMSV00.
For adding a new field i have copied the SAP view of a Logical database to CUS view.
Next i had added the Clearing date(BSEG-AUGDT) to the function group Document header(01) and selected the check box Preselect and saved the view.
But still i am not able to find the newly added field in the dynamic selection screen of the report.
Please suggest me where i am going wrong or how to do this.
Thanks in advance
Ajay

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

SAP Work Manager customization - adding a new field to equipment details screen (Syclo Agentry)

Hi Experts,
I am trying to add a field (NAME1) on the Equipment details screen under work orders in work manager 5.3 application.
I have performed the following steps, but I am getting an error while connecting to the application.
1) Create extension for Equipment class to add a new field.
2) added the new field (Name1) as the property to the standard object Equipment.
3) Added the field on the screen.
4) Added the field (name1) to the complex table ctEquipment.
5) Added the JAR file to Agentry.ini file.
6) Changed the Class mapping for parameter "Equipment" under group "SAPOBJECT" to point it to the custom (Extended) class.
7) Changed the class mapping for complex table parameter "ctEquipment" under group "CT_SAPOBJECT" to point it to the custom class.
8) after publishing the changes and re-starting the server, I get following error.
the log file generated (message.log) also has the same description.
What am I missing here? Any help would be really appreciated.

Hi Emanuel,
Thanks for looking into this issue.
I have performed the following steps as suggested by you, still it doesn't seem to work and gives the same error.
Below are the changes done on the ECC Side.
1) Copied the standard equipment class /SYCLO_CL_PM_EQUIPMENT1_DO to custom class ZSYCLO_CL_PM_EQUIPMENT1_DO. Changes made in the GET Method to get custom equipment related data
2) Modified the standard equipment structure /SYCLO/PM_EQUI_STR by adding one custom field
3) Configured this custom class as the object handler in the equipment mobile data object
4) Configured this custom class as the object handler for the equipment complex table
5) We are still using the standard BAPI Wrapper itself for getting the equipment data and the added field is reflected in the BAPI Wrapper table parameter
Is there something we are missing?

Adding a new field to the Address Data for a business partner

Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
Yusuf

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

Adding a new link to workcenter group

Similar Messages

Maybe you are looking for