Adding a new partner function in va01 has to differ in item wise

Hi all
here by adding a new partner function by item level in va01
i hav a z partner table , that has some values , each values differ from item level
for eg : item 1 (posnr) 10 , has a new partner called buyers1
posnr 20 has buyers 2
what i am facing probs is , i cannot append into table xvbpa (using a program mv45afzz) & form save_docu_prepare.
xvbpa table item is not storing
partne rwill come default from the customization , but my partner will be add depends on item / material .
i have tested a scenario for eg . when i creating a orders , as soon as entered a dealer , the default parner will be setting , then i entered manually a new partner , then it is reflecting in a table with item
customization partner doesn't hve a item , where as while creating when i put manually it is reflecting in item level .
and 1 more things , when i try to append it also , its is reflecting to all item in orders
tel me how to refresh the new partner item wise , that also O.K

nO ANSWER FOR THE QUES. NEED TO RAISE MORE QUES. SO ONLY I AM CLOSING

Similar Messages

New partner functions for datasource 0CRM_SRV_IBASE_ATTR

Hello,
in note 874267 is described how to implemention new partner function in datasource 0CRM_SRV_IBASE_ATTR. But i doesnt know how get the structure iba_partner in the badi. Is there are function modul simulare like CRM_BADI_GET_BDOC.
Regards
Sven Sende

Hi Pramod,
SMQ1 will only show an entry, when there are available data for the delta queue, i.e. someone has made a change or added new data.So checking RSA7 and SMQ1 will give the same result, if RSA7 shows more than 0 entries.
The problem may be the init. What init did you do: an init with data, or an init without data, or an init with a filter. Experience with our CRM system tells me, best way to initialize any CRM data is to do a full data init (without filter) or a init without data (without filter). I wonder about the FULL load you mentioned ? When did you do it ?
Kind regards,
Jürgen

A new partner function is been defined for a particular customer in r/3?

Hi All,
There is a new partner functions been defined for a customer apart from soldto,shipto,payer,billtoparty partner functions.
The new partner functions is Sales head.
And how to i bring the sales head information from the customer master from r/3 to bw?
Do i need to create a new zobject nor enhance the customer master ? nor simply create an sales head object in bw and define the characteristics as Reference characteristics??
pls help me !!
Thanks
Pooja

Hi,
You should enhance the standard Data source 0customer_attr with that additional partner function (sales head) as per the proper logic and replicate the same . if it is 3.5 that same object( related to that field length and data type) same object can be added as attribute at info object level and do the transfer rules and activate that and try to the load.
Thanks & Regards,
Sathish

How to define a new partner function?

Dear experts!
Thank you for your attention!
we are using ECC6.0, I just want to ask how we can define or create a new partner function?
Best regard!
Tangdark

Hi
Tang
Use Tcode VOPA
Partner function
Specify an alphanumeric key which can have up to 2 characters and a description for a partner function.
Partner type
The partner type is an indicator which informs you of the type of partner, for example, partner type customer "KU".
Currently, you cannot change the partner types in customizing. You canonly select the partner types that are included in the standard SAP R/3 System.
Error group
Using the error group, you assign an incompletion procedure to a partner function (see section "Incompletion log").
Higher-level function
For a partner function, you can specify the higher-level partner
function. In this way, you can portray an existing dependency between the partner functions.
Unique in customer master record
If you characterize a partner function as unique, you can specify it only once in the customer master record.
The sold-to party has to be unique in the customer master record whereas you may specify several contact persons.
Customer hierarchy type
In this field you can specify whether a partner function can be used for a customer hierarchy. Enter the customer hierarchy type permitted
for the partner function. Refer to the section "Define hierarchy types
and assign to account groups".
Convert functions
If you work with several languages in the sales and distribution
system, you can carry out a language-dependent function conversion.
This means you can display the internal key definition, for example, AG, WE, and so on, differently on the screen depending on the logon language of the user. For example, you can display the key CU as AG when logged on in German. (The conversion is necessary because the partner functions such as AG, WE are partially hardcoded in the programs.)
Thx.
Edited by: DWARKESH THAKKAR on Oct 28, 2008 7:16 AM

Creation of new partner function for VENDOR

Hi,
I've a requirement to create some Partner functions for vendors while creation of vendor. Some Partner functions are available by default and some we need to add. but while doing a BDC we are not able to find how many of them are available or where to put the new Partner function?
Please let me know, if there is any BAPI availble..
Regards,
Anupam

Try below LSMW batch input method its very esay to upload data
Object               0040   Vendor master
Method               0001   Standard
Program Name         RFBIKR00
Program Type         B   Batch Input

Add new partner function as a characteristic in structure PAPARTNER

Hello experts,
I have create 2 new partner functions (Z) in SD and have assinged in customer master. I need these 2 custom partner functions to be transfered to CO-PA during billing. I have followed OSS Notes 12682, 36557 and 36406.
I Have define 2 new domain/data elements in the new partner functions (ZFPZ1 and ZFPZ3) and have assign it in structure MCPARTUSR to the new partner fields (PPARTZ1 and PPARTZ3).
However when trying to add this new fields to the profitability analysis data structures using transaction KEA0, from the structure PAPARTNER, the new partner fields do not appear.
Can anyone tell me what is missing?
Best regards,
HP.

HI,
normally it should work fine if you followed SAPNET note 36557 + corresponding. If it is freight cost where the problem occurs, see SAPNET note 411032. See also 93658, maybe thats helpful.
Best regards, Christian

Why partner function description cannot see in the billing item?

Hi Experts,
I have one doubt about partner function.
I have created a new partner function with description and assign this partner function to the billing partner function procedure.
When I create the billing document, in the item level, I can only see the partner function name, but description is missing.
What is the reason?
Does any one meet such kind of situation before?
Hope to give me some suggestion.
Thanks in advance.
Best regards,
Chris Gu

Hi Chris Gu;
In the SD module personal numbers addresses are determined to be
the address of the personal area.
If the personal number is assigned to a sales office or sales
organisation the system shows the address of the sales office and
if there is no sales office the address of the sales organisation.
If you have no sales office or sales organisation assigned and is
not assigned to a personal area, the system does not determine an
address.
Please maintain the assignment and the address should be displayed.
If you want the private address of the personal number to be displayed
you can use modification note 63258. Please consider that
this may conflict with data security.
Regards
Ruy Castro

How to add a new partner function as a characteristics in COPA

Hi There,
Can you help please.
I am trying to add an existing SD partner function called End Customer as a characteristic in CO-PA. End Customer is not defined in the CO-PA PAPARTNER structure.
1 Sold To Party can have more than 1 End Customers. In such cases, during sales order creation, users will be prompted to select the End Customers. I need to extract the End Customer information into CO-PA as what is being specified on the sales order.
Appreciate if anyone can shed some light on this..
Many thanks in advance...
Cheers
HW.

Hi Warwick,
I've had a look at the SAP.Help Library - i am ok with the steps of adding the characteristics into COPA, no problems on this step.
My question was around adding a partner function into a PA structure - PAPARTNER. The End Customer is not defined in the PAPARTNER structure - hence, I cant easily create a new characteristic using the transfer from SAP table or derivation rules.
I need to find a way to extract the End Customers from the sales document, add that into the PAPARTNER structure and then create a new characteristics referencing that table.
I've been looking at OSS 32878, 36557 and 12682 - and am slightly confused.
Has anyone tried this before?
The system is ECC 6.0.
Thanks
Cheers
HW

New Partner Function in CRM (Solution Manager Service Desk)

Hi CRM Gurus!,
Even if this problem is present in my Solution Manager Service Desk I'm creating this thread here in CRM Forum because I thin'k I need the experience of one CRM Expert. Í´ve created this question in Solution Manager Forum also but I hadn´t solved my problem yet.
We add the partner function called "Additional Partner", but I don't know why in the tab "Partners" in the CRM transaction we want to add a new partner but in the partners combo the new one does not appear in the list.
The procedure that I did was: I created a new business partner function and I added this new function to my partner determination procedure, then in SPRO: "Define Partner Determination Procedures" -> I set the option "Only Functions Assigned in Procedure".
These are the values. fro my new function:
Function: ZSLFN004
Text: Additional Processor
Abbrev.: ZAMS
Function Cat.: 0008 Person Responsible
Usage: CRM Customer Relationship Managem.
Relatshp Cat: CRMH06 Is Responsible BP For
The partner functions in my procedure are:
00000001 Sold-To Party (CRM)
00000046 Approved by (CRM)
SLFN0001 System Administrator (CRM)
SLFN0002 Reported by (CRM)
SLFN0003 Support Team (CRM)
SLFN0004 Message Processor (CRM)
ZSLFN004 Additional Processor (CRM)
But in the transactions when I try to add a new partner in the partners tab only the follow functions appears in the combo:
00000001 Sold-To Party (CRM)
00000046 Approved by (CRM)
SLFN0001 System Administrator (CRM)
SLFN0002 Reported by (CRM)
SLFN0003 Support Team (CRM)
SLFN0004 Message Processor (CRM)
I don't know why my ZSLFN004 is not listed in the combo.
By the way, my function was created as a copy of SLFN0004.
Any help would be appreciated.
Regards
Gustavo Balboa

Hi Vishant,
Thanks for your answer, but some one in the Solution Manager forum gave me the answer few minutes ago :). The problem was that in some transaction types (I don't know wich ones or if it aplies to all) the category 0008 - Person Responsible can only appear once, my partner function was a copy of the function SLFN0004 - Message Processor and that function is defined with the category 0008, so I had 2 partner functions defined in the category 0008.
To solve the problem I just adjust my Z function and put the category 0016 - Service Team and let the relationship empty. Then the partner function is now showing in the combo at partners tab.
Again, thanks anyway for the time that you take to answer my question.
Regards
Gustavo Balboa

User Exit for sale order for adding a new partner

Hi
i am having the Scenario to add a new partner in sales order in both VA01 / va02 transaction .
i am using the exit named MV45AFZZ . (USEREXIT_MOVE_FIELD_TO_VBAP) for this scenario.
Its perfectly working for VA01 , but not VA02 .. why ..
can any1 explain me ..

Hi Irfan,
You want to add partners in Sales order, the partners data will be saved in VBPA table.
The USEREXIT_MOVE_FIELD_TO_VBAP is used for values for fields at sales document item level.
For you its working for VA01 because , you have modified the strucure XVBPA for partners
data and it is not saved yet to the database table so it is available in VA01 and in VA02
it is checking the VBPA table there this data will not have been saved please check VBPA
for your sales order.
Please check below things.
1) Check whether you have passed UPDKZ in XVBPA UPDKZ has below values INSERT (I),DELETE (D),UPDATE(U) etc nad
if it doent works
2) Please check the SAVE_DOCUMENT_PREPARE form and check XVBPA here whether it contains the
entries you modified if not use the same code as you used in USEREXIT_MOVE_FIELD_TO_VBAP
then these changes will be saved to database and hopefully you will get it in VA02 as well
also pleaseuse the flag UPDKZ whenever you modifying this tables for your case
XVBPA-UPDKZ.
Regards,
Pawan

New partner function in the inbound delivery

Hi
I want to have the partner fuction: CR (forwarding agent) in the inbound delvery. It has to be copied from the purchase order.
I added the partner type to the partner determination procedure for the vendor, the purchasing document and the in the inbound the delivery.
Then I added a forwarding agent to the master data of the vendor. When I created a purchase order the forwarding agent was nicely copied to the purchase order. But when I created the inbound delivery from the purchase order it was not copied over.
By the way I checked also the partner procedure which is linked to the sales order which is used as the source for the copy control of the inbound delivery. This has the forwarding agent in it as well.
Anybody an idea how to proceed?
Thanks,
Rudy

There might be an entry of Partner function missed in SPRO.
SPRO>Logistics Execution>Shipping>Partners>Master Data-->Set Up Partner Determination for Deliveries.
If forwarding agent entry missed ,maintain the entry.Then partner entry will automatically copy to delivery .

Creation of new partner function through /AFS/BAPI_SALESORD_CHANGE

Hi all,
Can anybody help me to create partner functions through the bapi /AFS/BAPI_SALESORD_CHANGE ??
In the selection-screen we will pass the vbeln, PARVW and kunnr values ??
Any kind of little help is very much appreciated.

thats all you need to pass to change the partner type like bill to or ship to.
You dont create partner functions from this bapi. This is to change the sales order and the details in sales order. Creating partner function comes under SPRO.
Ask you sales functional people to create new partner function

Modify and create new partner function in MM

Hello to everybody = )
Recently I was asked to copy from one cliente to another most of the customizing for the MM module. When I arrived to the PF step for vendors I had a couple of problems.
First, some of the standard Partner Functions were modified and some other were created. When I try to delete and then save the PF
AP Contact Person AP
TO
PC Contact Person AP
The systems tells my that the PC value is not valid in the V_TPAR table.
How should I change this PF in order to continue with the customization steps.
Regards.

I just find our the answer to my question = )
Regards!

Free form partner function field in Sales document header and item..

Hello Experts,
Is there anyway we can use the partner functions functionality in Sales document header and item level, so that we can enter a free form number in the Partner field? I mean is it possible to be able to enter a free form number WITHOUT getting validated against corresponding master data like Customer or Vendor master, Contact person, Personnel or User master records?

Hi,
It is not possible.
Because partner function will be determined in the sales document header and item as per the configuration you have done in the partner determination.
It is not possible to enter a number wihich is not created and assigned.
Regards,
Mullairaja

Addition of a partner function

Hello,
I have a customer master to which someone has added a new partner function (Fax partner). However, this was not captured in the changes. Could someone please tell me if this change can be seen somewhere?
Thanks very much.

Hi,
Run the report rsscd100 with tcode SE38. In object set 'DEBI' and in ID object set the number of the customer with lenght 10 (ie: write the zeros in the left side), set a range of dates (from you think that it must be done) and in the field table search the values for KNVP and the insert values. You could see the user, date, hour and tcode.
I hope this helps you
REgards,
Eduardo

Adding a new partner function in va01 has to differ in item wise

Similar Messages

Maybe you are looking for