Adding a new podcast entries page in iweb

I am sure this is basic stuff, but it is escaping me. I built an iweb site (published in Mobile Me). I added a video podcast page then added the first video podcast entry. All went well. I want to add another video podcast entry and this is where I get lost. I assumed that I could duplicate the first entry page I created, edit it and add the new video podcast and publish. I am unable to duplicate the page. I have a rather highly customized page and really do not want to recreate it from scratch. Maybe I do not need a podcast page and I should just use a movie page, though I did want subscribe feature. If you want to take a look visit http://web.me.com/waynek1/Site_2/Podcast/Podcast.html Thanks

The feed URL you give redirects to http://kaufmak.wordpress.com/category/podcasts/feed/ which is the URL being used by iTunes. This feed has only the one episode in it, that of 15 February, and that shows in the Store and when subscribing.
You are creating your feed in Wordpress: so if you have added an episode there you haven't taken whatever steps are necessary to get it into the feed - I'm afraid I can't advise on WordPress. You can only edit description and other data in WordPress; Chrome will allow you to examine the feed but not edit it.

Similar Messages

IdeaPad S205: BIOS/EFI menu not accessible after adding a new boot entry using the bcfg command

Hi community,
I just got a new S205 and wanted to install Win7 and archlinux in dual boot (GPT formatted SSD).
Win7 installation worked like a charm. Archlinux worked well aswell, unfortunately i couldn't make a boot entry following this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide#EFISTUB
So i had to manually create the boot entry using bcfg command in an efi shell:
https://wiki.archlinux.org/index.php/Unified_Extensible_Firmware_Interface#bcfg
The first attempt (I double checked that i got the right filesystem [fs0] and so on) failed and resulted in an automatic reboot. After this I immediately reentered the efi shell and tried again. This time I could create the boot entry.
Now if I reboot everything seems fine (I can dual boot Win and arch) BUT I cannot access BIOS/EFI menu via F2 anymore. It seems like it just does not exist anymore. How do I get it back? Should I just flash over with the original EFI from the Lenovo download page? I could theoretically do that (I can still change boot order using my arch live medium), but i could not reset EFI prior to flashing... which is always recommended to do.
So I am - again - pretty stuck with this EFI. I hope you can help and tell me what to do.
This EFI-Implementation on the S205 must be the worst piece of "engineering" ever.
Nothing works the way it is intended to... I would not dare to wash my hands clean off any faults, but ADDING a boot entry resulting in a not accessible BIOS/EFI menu... there's just something wrong.

At least I now know what the problem is:
It seems like the S205 can only keep 7 boot entries in NVRAM (Can anybody concern?).
As I already have 7 boot entries:
adding a new entry using efibootmgr tool does not work (fails without error) and gummiboot doesn't work either. Nevertheless, adding a boot entry (for rEFInd) from within the UEFI shell works, but seems to result in deleting "Boot0000" aka Setup which then breaks my EFI. Breaking meaning that I cannot access it anymore.
I can however (and did so twice yesterday) flash the original EFI from within Windows and thus gain access to the EFI menu again. Nevertheless this resets my boot entries again so the refind (or gummiboot) bootloader gets deleted again and only Win7 is bootable.
Now what would be the smartest way to dual boot this system? Which of the boot entries is safe to delete so i could install refind/gummiboot instead? For instance, I don't know where USB FDD and USB CD come from. Can I delete them? Or won't I be able to boot from external CD-ROM or USB drive anymore if I delete them?
Or would it be best to delete the Win7 bootloader and try to have refind/gummiboot boot it? And will they at all be able to still find the Win7 boot files once I deleted Win7's boot entry? When I install refind as bootloader and manually add an boot entry for it using the bcfg boot add command it is able to load Windows7. But will this still be possible if I delete the Win7 boot entry? It would most likely be possible - I assume - if the Win7 boot files (on the EFI system partition) were still there even after deleting the boot entry. Can someone tell me how deleting a boot entry exactly works and which files get or don't get deleted?
Best regards.

Adding Background music to welcome page on Iweb.. any ideas? instructions?

looking to add background music to my welcome page on iweb. any easy instructions? thanks daniel malibu

Take a look at my page "source" code for some clues.
Editing published pages is as easy as opening the "raw" html code in TextEdit (preferences set to "plain" text) and applying your edits (copy/paste simple).
But once you edit these pages any changes made by the iWeb application and a new "publish" would remove your hand edited code.
To change what appears in your "Title" would only require you edit that line of code. To add metatags is the same.
The "snippet" part of iWeb 2 is always in the "body" part of the page code. Title and custom icons are part of the "head" tag code. Javascript code could be in even more parts depending on its function.
None of this is for the faint of heart or for those that don't understand the basics of html page code.
Open your published iWeb 2 page with a text editor and edit the "title" tag code to change the displayed "name". To add a custom icon requires you upload a 16X16 image file (the size of the icon in the browser address bar), upload that file to your server and then use that URL in the edited html code for your page. These are part of the "head" tag code.
Hope this helps.

Podcast Entry Page Not Displaying

Hi There,
I have a music podcast where I upload DJ mixes, the file sizes are quite large and I think it may be the cause of this problem. Basically, when you go to the podcast listing page it all looks fine, but when you click the 'more' link next to each listing the page does not load properly, seems like the browser is trying to cache an 80mb audio file before loading the text on the page. Can anyone help me get around this?
My podcast page is:
http://www.digitalrockit.com/DigitalRockit_OfficalSite/Podcast/Podcast.html

I have just noticed I do not have this problem with Safari, only with Firefox. So my question is any advice on how to make it Fierfox friendly?

File extension missing for new blog entry pages

I have a blog and have created new entries, but I can't publish "because the file does not have a file extension." (I clicked on the publish button and also tried in the menu "Publish to Mac.com." Neither works.
I thought whatever was necessary to connect a new entry to my blog was created automatically. I'm not even sure what a file extension is. What is it?
In the Site Inspector I can do nothing. All possible commands are grayed out. Maybe I'm not supposed to make a hyperlink for a file.
Thanks for any help you can give. Edify

Will I have to clear the cache every time I want to upload new material?
you don't have to clear the cache to upload the material, you sometimes have to clear the browser's cache to see your new page, for the old page in the cache may prevent your browser from displaying the new page properly.
BTW, the same is true for any visitor to your site - if you change your page frequently and find that you have to empty the cache, then any visitor to your site also will experience the same problem and should know that he/she should empty the cache if the page looks funny.

Adding an albumn to existing page in iWeb

I have a website developed with iWeb. I want to add another portfolio to the existing portfolio page. I can't seem to find an option to add an album [I call it a portfolio page on the website.]
Rose

Thank you SO much. Please visit my art website. It's rudimentary, but serves my purpose: to share my art with everyone.
Happy New Year!

Adding html code to my pages with iWeb

Hi,
I am a newbe and I am trying to add some basic html code lines to my pages created with iWeb but I don't understand how to do it.
May you help me?
Thanks!
Eta

see this:
http://iwebmore.ctrl-j.eu/iWebMore.html
http://web.mac.com/varkgirl/iWeb/Aardvarkland/Basic%20HTML%20Additions.html
max

Hosting iWeb entry pages on .Mac & video files on own server

Hi
I am trying to establish whether there is any real point in hosting a podcast on .Mac because of the bandwidth cost. Is there a point in publishing the podcast entry pages to .Mac, but hosting the video files on another server where I can get cheap bandwidth? Seems like less of a hassle to publish new entry pages if I'm going to podcast using iWeb. How do I make sure that iWeb doesn't upload versions of the video files to .Mac when I publish? ie. only the links to these files on the other server are published to the new entry pages on .Mac?
Tks Guys & Gals

Don't worry, actually worked this out. There is no point in hosting any part of the podcast on .Mac. Just figured out how to browse to new ftp location in iWeb. Sorry, Mac newbie

My main blog page can't find its entry pages

When I make iWeb blog entry pages, the main blog page can't find them. It says "Error. The file cannot be found." (even if I just use the placeholder "Blue bird day" page without changing it!) I'm dragging my image onto the placeholder image on the (Modern) Blog entry page but the main Blog pag can't find it or even the placeholder image on an unmodified new blog entry page. I am publishing to a file and ftp-ing it up to my ISP but I get the "file cannot be found" message even on my own hard drive before uploading. What's wrong?
The blog page of my site is:
http://www.christopherrauschenberg.com/Site/Blog/Blog.html
G5 Mac OS X (10.4.6)

Well, not sure of a complete solution for you, but I have found a specific problem.
From the main blog page. . . the link it gives for New York is
http://www.christopherrauschenberg.com/Site/Blog/429B84A8-BD4B-4B30-8A66-017811D F742E.html
However, in checking the directory, looks like that is labeled instead as
http://www.christopherrauschenberg.com/Site/Blog/429B84A8-BD4B-4B30-_124C76.html
That would explain why it couldn't be found.
A little further checking or your root directory shows similar mismatches between various page index files and the folders containing data.
Have you published and uploaded portions at a time? Is ossible after changes we made that all changes were not published.
It might be best to clean out the FTP folder, republish your whole site from iWeb to a folder on your computer and re-FTP it to your site (making sure to enter correct url of your site on the publish screen as well).
(if you think I helped in any way, I'd appreciate it if you could mark my reply as either "solved" or "helpful" using the little buttons in the title bar of the reply. Manythanx! )
Good luck!

Help! New Blog Summary Page titles are publishing in red!

Hi. All of a sudden, for no apparent reason, my new Blog titles, and the "Read more..." link on the cover/summary page, are publishing in red rather than black to the folder. The older ones still publish in black. It's doing it on two separate Blog pages. Does anyone know how to fix this? Please

Hi, thanks for your reply. I don't see anything signifying a default color in the hyperlink section of the inspector. The titles have always shown as black on the blog entry page in iweb, and in the blog summary page the titles and "Read more..." have always shown as red, with the rest of the text in the entry being black. And then all the text has always gone to black after publishing until now. As an experiment I changed the color of one of the titles to green, and it still published in red.

Hi. I've added a new page to my iWeb '08 version 2.0.4 website but can't seem to select the top menu pages to make a rollover color change. I can select them on the original pages. What am I doing wrong?

Hi. I've added a new page to my iWeb '08 version 2.0.4 website, but can't seem to select the top menu items to make a rollover color change. I can select them on the original pages. What am I forgetting to do?

Old Toad has a tutorial about changing the colors in the iWeb default menu...
http://oldtoadstutorials.net/No.24.html
If you want your website to be found by search engines you would be better to follow Ethmoid's suggestion of creating your own navigation...
http://www.iwebformusicians.com/iWeb/Navigation.html

Adding pages to iWeb

when adding page to iweb, how do i move the name of the new page off of the top of the home page? looking to have it on the bottom of the page.. thanks!

Are you referring to the navbar at the top which are links to each page in the site? If so then you'll have to deactivate (not include) the navbar on each of the pages in the Inspector/Page/Page pane:
Click to view full size
and create your own Text Based Navbar which you can position anywhere. However, there is a drawback to having the navbar at the bottom: if the page is longer than the browser's window a visitor would have to scroll down the page to get to the navbar in order to go to a new page. That's not good web page design.
However, if the pages are long then having a navbar at the top and bottom is wise.
OT

How can I add a podcast episode to an existing web page using iWeb?

How can I add an episode to an existing web page using iWeb?
I could probably figure this out but I am afraid if I make changes to the site and re-upload it to the podcast area I will have just doubled it. I see them repeated from time to time.
What is the proper protocal? Thanks
Mac G4 Mac OS X (10.4.3)

Hi apple-owner,
Method 1.
To create this scatter-plot, I selected the whole of Columns A and B. (Shift click on the Column reference tabs).
The plot ignores blank rows, but they are "ready" for new data:
Method 2
If you did not select whole columns, you can extend the "active" rows. Rows 1-5 selected:
Add more data rows and drag the fill handle (small white circle, bottom right) down
Regards,
Ian.

New podcast page not appearing in iTunes Music Store yet

Our latest addition to the WhiskyCast podcast series, WhiskyCast Virtual Tastings, was added to the iTunes Music Store last weekend. However, it's still not showing up in search results unless one types in the complete name of the show, and then only shows up as a single episode -- not with a page of its own like our other podcasts. I know it takes a day or two for new podcasts to show up in the search results, but without the page, there's no "Report a Concern" link for me to check with the iTMS team on whether there's an issue or not. Should I wait a few more days to see if the problem straightens itself out, or is there someone within Apple that I can reach out to to see whether there's a problem with my feed that's keeping the page from showing up.
Here's a link to the debut episode in iTMS and what iTunes displays:
http://itunes.apple.com/us/podcast/whiskycast-virtual-tastings/id460281190
Thanks!
Mark Gillespie

The link you give is to the Store page for your podcast - this is what the Search results will link to once they become available. Your page does have the 'Report A Concern' link but I shouldn't bother (iin any case it's really meant for people to complain about content or whatever).
It can take some days for the Search results to show; it's been eight, so it should happen any time now. If you want to contact Support (though I don't think you will find them at all helpful), go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

IWeb 08 external links correct on podcast entries, however wrong on index

Hope the title makes sense; Basically the podcast entries we create have an external link to some referenced sites and they work fine when looking at that podcast entry, HOWEVER the auto generated index page (listing all the podcast entries) shows a preview of the text of the Podcast and we've noticed that the SAME external links are altered, forward slashes are replaced with %253 and spaces with %25220 (I can understand spaces being replaced with %20! but NOT this)
This only happens with EXTERNAL links. You can see it on the Index page BEFORE you even upload the site. So clearly something is odd in iWeb 08 and not specific to using .MAC or an external host.
Is anyone else seeing this? We recreated the Podcast from scratch to ensure no iWeb 06 bad info was present.
This just tops it off... The LACK OF NOTIFICATION on sites URL's being moved due to folder name changes and now this. iWeb 08 needs some attention ASAP. Is there a clean way to back rev to iWeb06 (can you keep both installed at the same time?)

I'm having the exact same issue, not necessarily with podcasts, just that any external link works fine except in the rss feed, where characters are replaced with %xxx and return 404 errors.

Adding a new podcast entries page in iweb

Similar Messages

Maybe you are looking for