Adding a New row in Workbook above Table values

Hi,
I have created a Workbook for which i need to add 2 additional rows manually at the top. I added a row by deleting the Blue color line (with word 'Table'). But when i refresh the workbook, the blue color line is appearing again and the row which i added disappeared.
How do i make this possible? Is there any way through which i can add the lines just above the Table values?
Any help on this will highly be appreciated.
Regards,
Murali

Hi,
As per my view , Table name was written in the Backend with VB script hence its require change that first later you can include the Additinal rows .
Regards,
satya

Similar Messages

How do you set the number of rows in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

After the discovery reported above, I filed this report :
Bug ID# 10073038
Summary:
When Numbers is used on a system with decimal comma a csv file may be good AND wrong
Steps to Reproduce:
With Numbers v2, you introduced an interesting enhancement.
In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
This said.
(1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
(2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
Expected Results:
Every normally constituted user assume that in
case (1) he will get a perfectly built table
case (2) he will get every cells of a row in a single cell
Actual Results:
In fact you forgot the drag and drop way of use and in
case (1) every values separated by semi-colon are inserted in a single cell
case (2) values separated by comma are correctly spread in a table
isn’t it ridiculous ?
Regression:
Except looking in QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
or
to replace the commas by TABs and the decimal periods by commas
Notes:
While I am on this subject, I wish to make two proposals:
(1) It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
Doing that, dates would be imported correctly in every countries.
At this time, on an English system, you export as mm/dd/year.
If the doc is open on a system using the format dd/mm/year, the results will be odd.
On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
(2) It would be fine to add the format Tab Separated Values in the Export pane.
TSV + ISO date format would give documents opening flawlessly everywhere.
Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Adding a new field to a Z table

We have a Z table on which we have created a datasource. We have created a virtual cube on this datasource and queries are built on this cube. This setup is present on Dev, Quality and Prod environment.
Now we have added a new field to the Z table in Dev. We will be creating a new Infoobject for this new field and will be adding it in the Virtual Infoprovider and also in the queries.
1. Do we need to replicate the datasource so that newly added field is visible to the datasource? If no, is there any way?
2. When I have to transport this to Quality and Prod, do I have to capture all the components and objects (Table,Datasoure,Virtual Cube Queries)? If no, what should I capture in the transport request?

Hi,
First, you have to regenerate the datasource in order to add the field:
1) Log on to source system (where Z table is stored) and go to transaction RSA6.
2) Select the root node and click Expand (icon with '+' sign).
3) Search for your datasource (you can use the binoculars icon).
4) Click on Change.
5) Verify that the field appears on the list. Make sure that "Hide field" and "Field only known on client exit" options are not marked for this field.
6) Click on Save.
7) Select "Datasource" -> "Generate" (CTRL+S) menu option.
8) Use RSA3 transaction in order to verify the new field appears on test extractions.
Then, to replicate the datasource in BI:
1) Log on to SAP BI and go to RSA1 transaction.
2) Go to "Modeling" -> "DataSources" section.
3) Search for your datasource and right click on it. Select "Replicate metadata" from context menu.
4) Add the new InfoObject to the VirtualProvider.
5) Update the transformation which joins the DataSource to the VirtualProvider.
As far as transport requests are concerned, even though it requires more work, it is a good practice to group objects in different transport requests according to their type:
In the source System (R3 for instance):
1) One transport request with the table.
2) One transport request with the datasource and its structure.
In BI:
1) One transport order with the datasource replica.
2) One transport order with the new InfoObject(s).
3) One transport order with the modified VirtualProvider.
4) One transport order with the modified transformations from the datasource towards the VirtualProvider.
5) One transport order with the Queries and their elements.
I hope this helps you.
Regards,
Maximiliano

BAPI to insert a new row in the MCHA table

Hi all,
I am in search of a BAPI to insert a new row in the MCHA table... with the fields of the materail, plant and batch values.
Any inputs on this..is highly appreciable...
thanks in advance...
regards..
prathima.

explore BAPI_BATCH_CREATE

BAPI to insert a new row in the AUSP table

Hi all,
I am in search of a BAPI to insert a new row in the AUSP table... with the fields of the object and
characteristic values.
Any inputs on this..is highly appreciable...
thanks in advance...
regards..
prathima.

hi,
from best of my knowledge here is list of bapi through you can insert ausp table.
check it.
CLSE_SELECT_AUSP
CLVF_INSERT_AUSP
BAPI_CLASS_CREATE
C14K_AUSP_CHANGE_VALUE
CLSE_SELECT_AUSP
CLVF_UPDATE_AUSP
C14K_AUSP_ADD_UPD
BAPI_CLASS_CREATE
regards,
vipul

Inserting a new row in a child table referencing an already existing parent

I have two tables PARENT & CHILD (one to many), both of which are populated at different times.
In our toplink mappings, parent contains a collection of child Domain Objects, & and child Domain object contains a one - one to parent.
How can I insert a new row in a child table with reference to an already existing row in parent?
When I fetch the parent Domain object and try to set it in the child Domain Object and use the unitOfWork.registerObject() it goes into a circular loop of selecting from 2 other tables.
Please suggest.

Odd, have you disabled caching and indirection? (NoIdentityMap, dontUseIndirection, or alwaysRefresh/disableCacheHits). If so, then this could be the issue.
Otherwise please include the sample code you use to perform this, and verify that you do not have any unusual code in your set/get methods or in descriptor events. Also turn TopLink logging on and include a sample. Also ensure that you do not modify your objects until after registering them in the unit of work, and only modify the unit of work clones.

New Row gets created in table automatically

Hi all,
I have a panel box(pb1) in my JSFF which has a table(tbl1).
When the table is empty, if i collapse table's parent panel box i.e. pb1,
n again expand it..,I see new row created in the table...
I haven't put any code to create new blank row in table view object on collapse n expand of panel box...
How to fix this issue..?
JDEV vesion : 11.1.1.4.0
Please reply...
Thanks.

Hi yaminip,
Its not necessary to put the code in expand and collapse action of the panel box may it can be in different place
and the table may refersh while u expand /collapse the panel box and new row came to visible.... keep break point in the EntityImpl Create method or ViewObjectImpl InsertRow method
Find when its get fired........
Regards,
Suganth.G

Problem while adding a new row to the table.

hello,
In my ADF form i have a table. and when i click on CreateInsert it add a new to the table but at the first. i want all the new rows to be added at the end of the table in a sequence. how can i do this?....
Thanks and Regards,
Rakshitha

Hi,
Try this:
DCIteratorBinding dciter;
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
dciter = (DCIteratorBinding) bindings.get("findAllTestAndryIter");
ViewObjectImpl vo = dciter.getViewObject();
if (vo != null)
Row row = vo.createRow();
int rangeSize = vo.getRangeSize();
int rowsInRange = vo.getAllRowsInRange().length;
int insertPos = rowsInRange < rangeSize? rowsInRange: rangeSize - 1;
vo.insertRowAtRangeIndex(insertPos, row);
vo.setCurrentRow(row);
}

Problems with adding a new row in my table

Im an ADF beginner but I thought it would be simple to to do some basic CRUD stuff in ADF. Im now even struggling when i try to add a new row to my table.
Seems that the primary key id is not set correctly...
could someone help?

Hi,
Have a look to this page CREATE SEQUENCE
Regards,
Sébastien
Creating a Sequence: Example
The following statement creates the sequence customers_seq in the sample schema oe. This sequence could be used to provide customer ID numbers when rows are added to the customers table.
CREATE SEQUENCE customers_seq START WITH 1000 INCREMENT BY 1 NOCACHE NOCYCLE;

Problem in adding a new row in a table.. plsss hlppp

Hi Friends,
I have a table defaulted to 4 rows. I have a add button to add a new row in the table.
When i have already 4 rows in table, and when i click add its adding that 5th row correctly( and i used set_lead_selection for this new row ).
But i want to automatically make a next page once i hit the ADD button here. Each time now i m hitting next page then only able to see hte 5th row. I need once ADD is clicked, i want to see the 5th row visible..
Can someone tell me how to code or do this
thanks friends,,,
Niraja

hi niraja,
Plz refer to the following code:
method onactiononadd .
node_material type ref to if_wd_context_node.
elem_material type ref to if_wd_context_element.
stru_material type sflight.
node_material = wd_context->get_child_node( name = 'ANNA' ).
elem_material = node_material->get_element( ).
if ( elem_material is initial ).
call method node_material->create_element
receiving
element = elem_material.
endif.
call method elem_material->get_static_attributes
importing
static_attributes = stru_material .
call method node_material->bind_structure
exporting
new_item = stru_material
set_initial_elements = abap_false.
endmethod.
i hope it helps
regards
arjun

ADF Popup for adding a new Row in table

Hi All,
I have VO which is rendering as table on my jsff.I created a button of createInsert to add a new row and after commit it saves the values in Table in DB.
Works abst fine.
Now i want to change this feature to that when a New Row should be Added, a pop up should appear in the format of a form, and at the click of OK it should save the data and on Cancel go back to Page.
What i did was i added a pop up, in the pop up body i again dropped my VO as a form and added a dialoglistener to the pop up which commits on click of OK and Rollback on click of Cancel.
I am not getting any exception but The Db is not modified with my entries.
So its simple that i am commiting but nothing is changed till that time.
How can i get the Task done?????
Regards
User

http://www.oracle.com/technetwork/developer-tools/adf/learnmore/77-ok-cancel-support-in-dialog-351871.pdf
insert operation using popup
http://andrejusb.blogspot.com/2009/11/crud-operations-in-oracle-adf-11g-table.html
Edited by: Erp on Oct 20, 2011 6:47 AM

How to set a default value in an ADF table when adding a new row

Hi Guys,
I have a view object which I am using to create an ADF table. I also have a button which uses a CreateInsert binding to add a new row to the table. I have four fields: created_by, creation_date, last_update_by and last_update_date.
I want these values to be set automatically when I click add new row.
The values I want are:
created_by - admin
creation_date - sysdate
last_update_by - admin
lsat_update_date - sysdate
Any suggestions on how to do this would be appreciated
Thanks
-Mark

mark,
Those four fields can be set completely declaratively in the Entity Object (check out the History Colum feature). Copied from the (11g) documentation:
If you need to keep track of historical information in your entity object, such as when an entity was created or modified and by whom, or the number of times the entity has been modified, you specify an attribute with the History Column option selected (in the Edit Attribute dialog).
If an attribute's data type is Number, String, or Date, and if it is not part of the primary key, then you can enable this property to have your entity automatically maintain the attribute's value for historical auditing. How the framework handles the attribute depends which type of history attribute you indicate:
* Created On: This attribute is populated with the time stamp of when the row was created. The time stamp is obtained from the database.
* Created By: The attribute is populated with the name of the user who created the row. The user name is obtained using the getUserPrincipalName() method on the Session object.
* Modified On: This attribute is populated with the time stamp whenever the row is updated/created.
* Modified By: This attribute is populated with the name of the user who creates or updates the row.
* Version Number: This attribute is populated with a long value that is incremented whenever a row is created or updated.
John

FireTableRowsInserted(ind,ind) without adding a new row consequnces?

Hello all,
I am looking at code where someone is calling fireTableRowsInserted(index,index) when there is no new row being inserted or deleted?
What are the consequences when the above happens?
Does anything abnormal happen?
Method a
if(bool)
fireTableRowsInserted(0,0);
else if(bool2)
else if(bool3)
fireTableRowsInserted(0,0);
What will happen if bool is true?
fireTableRowsInserted will be called twice but there is only one row added!
Edited by: javapunt on Jun 24, 2008 9:08 AM
Edited by: javapunt on Jun 24, 2008 10:03 AM

camickr wrote:
When you fire an event from the TableModel you are just notifying the table that data has changed so the table can repaint itself.
So unless you have some code based on that event, nothing abnormal should happen, other than the table repainting itself twice.
unfortunately that's not entirely true (or maybe you have a different notion of "abnormal" than me ;-)
- in all versions: the selection gets corrupted.
- since 1.6: throws an ArrayIndexOutOfBounds on sorting
As a very general, very basic rule: never-ever fire bogus events - there's always at least one listener which gets confused. This rule applies especially to events which notify about a structural change (like inserts, deletes). Code which does is broken and must be fixed asap. Plus, the only collaborator to call fireXX should be the model itself, consequently the scope of any fire methods should be narrowed to at least protected (not possible for those core classes with public methods - which was a design accident ;-)
Attached is a small example (which should have come with your question, javapunt, hint, hint ...) to show the side-effects
HTH
Jeanette
* Created on 25.06.2008
package org.jdesktop.swingx.table;
import java.awt.event.ActionEvent;
import java.util.Locale;
import javax.swing.AbstractAction;
import javax.swing.Action;
import javax.swing.Box;
import javax.swing.JButton;
import javax.swing.JComponent;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.SwingUtilities;
import javax.swing.table.AbstractTableModel;
public class FireBogeyInsert {
    private JComponent createContent() {
        JComponent content = Box.createVerticalBox();
        final Locale[] locales = Locale.getAvailableLocales();
        final AbstractTableModel model = new AbstractTableModel() {
            @Override
            public int getColumnCount() {
                return 3;
            @Override
            public int getRowCount() {
                return locales.length;
            @Override
            public Object getValueAt(int rowIndex, int columnIndex) {
                switch (columnIndex) {
                case 0:
                    return locales[rowIndex].getDisplayName();
                case 1:
                    return locales[rowIndex].getDisplayLanguage();
                case 2:
                    return locales[rowIndex].getDisplayCountry();
                return null;
        Action fireInsert = new AbstractAction("fire bogey insert") {
            @Override
            public void actionPerformed(ActionEvent e) {
                model.fireTableRowsInserted(0, 0);
        JTable table = new JTable(model);
        table.setAutoCreateRowSorter(true);
        table.setRowSelectionInterval(0, 0);
        content.add(new JScrollPane(table));
        content.add(new JButton(fireInsert));
        return content;
    public static void main(String[] args) {
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                JFrame frame = new JFrame("");
                frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                frame.add(new FireBogeyInsert().createContent());
                frame.setLocationRelativeTo(null);
                frame.pack();
                frame.setVisible(true);
}

Create a new Row in an advanced table in an advanced table

Hi,
I am handling the master detail relationship. For this i have used advanced table in an advanced table. I am facing a problem while creating a new row in the inner advanced table.
I have a Display Sequence column in the inner advanced table. I want to handle the logic for displaying the value of this attribute. As per dev guide i have attached the view link and for handling the Add New row event i am using the below code
OAAdvancedTableBean sublineDetailsTableBean = (OAAdvancedTableBean) webBean.findChildRecursive("SublineAdvTableRN");
OATableFooterBean sublineTableFooterBean = (OATableFooterBean) sublineDetailsTableBean.getFooter();
if (sublineDetailsTableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM))
&& ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM)))
This is working fine. The challenge i am facing is for creating a new row. Below is the code given in dev guide
// get a handle to inner tableOATableBean innerTable =
(OATableBean)webBean.findChildRecursive("InnerTableBean");
// create an enumeratorOAInnerDataObjectEnumerator enum =
new OAInnerDataObjectEnumerator(pageContext, innerTable);
while (enum.hasMoreElements())
RowSet innerRowSet = (RowSet) enum.nextElement();
// get all rows
Row []rowsInRange = innerRowSet.getAllRowsInRange();
for (int i = 0; i < rowsInRange.length; i++)
Row nextRow = (Row) rowsInRange;
// In case you want to add new rows in this RowSet, you can do the same
OARow newRow = (OARow) innerRowSet.createRow();
// initialize value for some attribute and insert the row
newRow.setAttribute("SomeAttr", "SomeValue");
innerRowSet.insertRow(newRow);
The Above code creates a new Row in all the master records.
How do i identify that the add new Row event has been triggered for which master record?
Can any body please help me on this. I am stuck from a long time and am unable to find the appropriate solution.
Thanks in advance
Raj Papdeja

Hi,
Following is the code written in PFR,
OAAdvancedTableBean sublineDetailsTableBean = (OAAdvancedTableBean) webBean.findChildRecursive("SublineAdvTableRN");
System.out.println("sublineDetailsTableBean::"+sublineDetailsTableBean);
OATableFooterBean sublineTableFooterBean = (OATableFooterBean) sublineDetailsTableBean.getFooter();
System.out.println("lineTableFooterBean::"+sublineTableFooterBean);
if (sublineDetailsTableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM))
&& ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM)))
System.out.println("Inside Add New Row Button Event for the Sub Lines");
strValueParam = (String) pageContext.getParameter(VALUE_PARAM);
System.out.println("strValueParam=>"+strValueParam);
ViewLink vl = am.findViewLink("GEPSCSTaskLineToSublineVL1");
System.out.println("View Link=>"+vl);
if(vl != null)
OAViewObject vo = (OAViewObject) vl.getSource();
if(null != vo)
GEPSCSTaskLineItemsVORowImpl voRow =
(GEPSCSTaskLineItemsVORowImpl) vo.getCurrentRow();
Number LineNo = voRow.getLineNo();
System.out.println("Source Row Line No::"+LineNo);
/*OAViewObject vo = (OAViewObject) am.findViewObject("GEPSCSTaskLineItemsVO1");
GEPSCSTaskLineItemsVORowImpl voRow = (GEPSCSTaskLineItemsVORowImpl) vo.getCurrentRow();
Number LineNo = voRow.getLineNo();
System.out.println("Line No::"+LineNo);*/
// Getting the LineNo as null
/*int intRowCount = vo.getRowCount();
if(intRowCount > 0)
System.out.println("Sublines are already present");
GEPSCSTaskLineItemsVORowImpl tasklineVORow =
(GEPSCSTaskLineItemsVORowImpl)vo.getCurrentRow();
Number lineNo = (Number) tasklineVORow.getLineNo();
System.out.println("LineNo=>"+lineNo);
Number lastLineDispSequence = null;
// Method to set the display sequence
//am.invokeMethod("createNewSublineRow");
// create an enumerator*/
OAInnerDataObjectEnumerator enum =
new OAInnerDataObjectEnumerator(pageContext, sublineDetailsTableBean);
while (enum.hasMoreElements())
RowSet innerRowSet = (RowSet) enum.nextElement();
// get all rows
Row []rowsInRange = innerRowSet.getAllRowsInRange();
intRowCount = rowsInRange.length;
System.out.println("intRowCount=>"+intRowCount);
if(intRowCount == 0)
System.out.println("No Rows present");
OARow newRow = (OARow) innerRowSet.createRow();
// initialize value for some attribute and insert the row
newRow.setAttribute("DisplaySequence", new Number(1));
innerRowSet.insertRow(newRow);
else if(intRowCount > 0)
System.out.println("Rows are already present");
Row nextRow = (Row) rowsInRange[intRowCount-1];
lastLineDispSequence = (Number) nextRow.getAttribute("DisplaySequence");
OARow newRow = (OARow) innerRowSet.createRow();
// initialize value for some attribute and insert the row
newRow.setAttribute("DisplaySequence", new Number(lastLineDispSequence.intValue()+1));
innerRowSet.insertRow(newRow);
break;
When i try to fetch the Line No which is the primary ID of the Parent VO, it always returns me the LineNO of the first Row and not of the parent row for which i have clicked the Add new Subline button of the Child record
Number LineNo = voRow.getLineNo();
System.out.println("Source Row Line No::"+LineNo);
Is there any way to fetch the primary ID of the row for which i have selected the Add new Subline button
Thanks
Raj Papdeja

Problem with adding a new row in JTable

Hi,
I've created a JTable using DefaultTableModel with DefaultTableModel(Object[][] obj,Object[] col) constructor.I've written actionListener for a JButton which should add new row to the tablemodel.Now, the listener adds the row to the model.But its throwing an ArrayOutofBoundsException and the added row is not visible unless I click on any column of the table.
Kindly help me to resolve this problem
TIA
Regards
Gopi

Thanks a lot for the reply. Here is the complete code
TableImpl.java
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.table.*;
import java.util.Vector;
public class TableImpl extends JFrame {
DefaultTableModel dataModel;     // TableModel Variable
/* Constructor to add table and button to the frame     */
TableImpl() {
          getContentPane().setLayout(null);
          setSize(800,600);
          myModel();
          final JTable table = new JTable(dataModel);
          JScrollPane scrollpane = new JScrollPane(table);
          getContentPane().add(scrollpane);
          scrollpane.setBounds(10,10,700,300);
          TableColumn tcCol = table.getColumnModel().getColumn(1);
          /* Adding ComboBox to the CellEditor of Column 2 of table     */
          JComboBox jcbComboBox = new JComboBox();
          final ReturnVector vctDBAccess = new ReturnVector();
          jcbComboBox.addItem(vctDBAccess.vctGetOidList().elementAt(0).toString());
          jcbComboBox.addItem(vctDBAccess.vctGetOidList().elementAt(2).toString());
          jcbComboBox.addItem(vctDBAccess.vctGetOidList().elementAt(4).toString());
          tcCol.setCellEditor(new DefaultCellEditor(jcbComboBox));
          /*     Adding Listener for Table      */
          dataModel.addTableModelListener(new TableModelListener() {
               public void tableChanged(TableModelEvent e) {
          /* Columns Manipulation */
                    if(dataModel.getColumnName(e.getColumn()).equals("Second")) {
                    int iRow = e.getFirstRow();
                    int iColumn = e.getColumn();
                    String strColName = dataModel.getColumnName(iColumn);
                    String strData = (String)dataModel.getValueAt(iRow,iColumn);
                    String strNextColumn = dataModel.getColumnName(iColumn+1);
                    dataModel.setValueAt(vctDBAccess.vctGetOidList().elementAt(vctDBAccess.iGetIndex(strData)+1),iRow,iColumn+1);
          /* Adding button to Frame     */
          JButton jbInsert = new JButton("Insert");
          /* Adding new row to the Tablemodel -- Probelm is here     */
          jbInsert.addActionListener(new ActionListener(){
          public void actionPerformed(ActionEvent e){
                    try {
               Object[] nrow = {"what", "ever", "you"};
               dataModel.addRow(nrow);
               }catch(Exception ex) {
               System.out.println("Exception at adding row = " + ex);
getContentPane().add(jbInsert);
jbInsert.setBounds(100,350,100,20);
addWindowListener(new WindowAdapter() {
          public void windowClosing(WindowEvent e) {
               System.exit(0);
     /* Method to initialise new tablemodel     */
     public void myModel() {
          Object[][] data = { {new Integer(10),"two","three"},
                                             {new Integer(5),"two","three"},
                                             {new Integer(4),"two","three"},
          String[] col = { "First", "Second", "Third"};
          dataModel = new DefaultTableModel(data,col);
public static void main(String arg[]) {
          TableImpl ct = new TableImpl();
          ct.setVisible(true);
/* Class that returns a Vector of String for populating ComboBox entries and
          for getting the index of a particular element of the vector          */
class ReturnVector {
               Vector vctOidName=null;
               ReturnVector() {
                    this.vctOidName = new Vector();
                    vAddOidList();
               public void vAddOidList() {
                    String[] dbResult = {      "system", "1.3.6.1.2.1.1" ,
                                                  "interface", "1.3.6.1.2.1.2" ,
                                                  "snmp", "1.3.6.1.2.1.3" };
                    for(int i=0;i<dbResult.length;i++) {
                         System.out.println("Value = " + dbResult);
                         vctOidName.addElement(dbResult[i]);
               public Vector vctGetOidList() {
                    return vctOidName;
               public int iGetIndex(String strData) {
                    System.out.println("Index = " + vctOidName.indexOf(strData));
                    return vctOidName.indexOf(strData);

Adding a New row in Workbook above Table values

Similar Messages

Maybe you are looking for