Adding a new subscriber in CUCM 9.1.2 cluster cause all device reset

I am on CUCM version 9.1.2 ,whenever i add the subscriber /upgrade the subscriber to Cluster  ,all the registered devices drops .
Not sure why ,In Cisco Documentation ,it never stated this bug in 9.1.2 service release notes.
However , In 9.1.1 mentioned about this in important notes. 
CSCub12922: Adding a new subscriber causes device reset
After you install a new node in an existing cluster, all phones that are registered to the cluster are reset.
Anyone experienced ? or aware about this bug?
Is this the case going forward in any version after 8.X? for subscriber addition to cluster will reset the devices?
Thanks
Manoj

Hi Manoj,
As per the following bug
https://tools.cisco.com/bugsearch/bug/CSCub12922/?reffering_site=dumpcr
Symptom:
Add new subscriber to existing 8.x CUCM cluster cause all device reset
Conditions:
Adding a new subscriber to existing 8.x CUCM cluster cause all device reset due to database update. Issue recreated in lab when "Prepare Cluster for Rollback to pre 8.0" set to both true & false. The symptom and logs are the same in each scenario
This is not a bug. The condition is applicable only to CUCM 8.6 and higher releases. Whenever a node is added to CUCM cluster , from CUCM 8.6 onwards , the phones belonging to that Call Manager group will be automatically restarted
Workaround:
None
So, this applies to all 8.6+ releases of cucm.
HTH
Manish

Similar Messages

  • I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosn

    I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
    Any idea?

    Hello,
    Can you tell us what versions of CUCM and CUxAC you are using?  Just extensions alone in CUCM will not sync to the corporate directory within the attendant console application.  You will at least have to have user's associated with those extensions and depending on your rule set within the console that should then bring those extensions into the console directory.
    Thanks,
    Tony

  • I'm new to iCloud.  Is it password protected on all devices?

    I'm new to iCloud.  Is it password protected on all devices?  I currently subscribe to Callpod Keeper and want to ditch it for iCloud.

    iCloud is just a place to store stuff and have it synchronized among your devices. Some invididual applications that use iCloud have passcode locks, but not all. If you don't want other people to see your iCloud data, do one or more of these depending on your situation.
    Make sure your iPhone/iPod/iPad uses a passcode lock that becomes active after a few minutes.
    Make sure your Mac locks after a few minutes (in Security preferences or Keychain Access).
    If multiple people use the same Mac, you should all have individual accounts on the Mac and on iCloud so that you each get your own private session on the computer, so your iCloud data is not shared or seen by others.

  • 160gb classic won't sync after adding a new album to the library..'sync' lettering in devices is not highlighted

    All was fine until i bought two new albums and tried to sync them today. They appear along with artwork in the library but the 'sync' lettering in 'devices' isn't highlighted and syncing simply does not take place.
    I had to re-install Norton anti-virus software today but otherwise cannot think of any possible explanation for the lack of response.
    Ipod is close to being full but i think i have enough space left...i can't delete any albums now anyway..except from the library.
    I have re-installed i-tunes.
    Help gratefully welcomed

    Ok I've got some additional info. If I reload the offending videos into itunes as Movies rather than TV shows then the'll load onto my iPod. Anyone know why my iPod would let me load it with a movie but not let me load it after the exact same video is changes to a tv show? Someone has GOT to know something. Please people please!

  • New Apple TV update & now not recognizing MacBook Air, all devices have home sharing ON.

    This is getting ridiculous. I wanted to simply shoot my favorite playlist through to my TV & surround sound when a few friends stopped by. I went to turn it on using my Apple TV and wham, and had to install an update. There went 1/2 hour of waiting. Then finally done, and, nope....**** thing doesn't recognize the macbook air, or my iPhone, or my iPad. ALL have home sharing ON, including Apple TV, all are connected to the netwoork. But nope. I finally gave up after an hour of restarting all & trying to troubleshoot, find help online, but I had to get back to my guests.
    These electronics are taking WAAAY too much time to update, diagnose, troubleshoot, ..... we do nothing anymore but sit on the computer.
    Anyone have ANY idea how to fix this? Oh, wait, maybe I should kill two hours at a Genius Bar? Yeah, that would have been great: hey, wait a couple of hours everyone while I try to schedule an appt and get to the genisu bar so we can listen to music.

    Did you restart your router.

  • New Subscriber add in CM Cluster but agents are not logging in on IP Phones registered to new subscriber

    Hi,
    I have added a new subscriber to existing cluster in Contact Center Environment. Agents are unable to login the CTI application using the phones registered on new subscriber. Call Manager version is 7.0.2 and ICM version is 7.5.8.
    Please advise.
    Regards,
    Hammad.

    Is the CTI Manager running on the new subscriber?
    What do you see in the .ems file for the JTAPI gateway?
    Are the phones still associated with the JTAPI user?
    If you unassociate and reassociate a phone, does that work?
    Regards,
    Geoff

  • I have a personal itunes account with an iPhone5s and an iPad 4 mini. I have unlokced my old iPhone 4 to use for work on a diffeent SIM and new number, can i have all devices associated to me single appleID and use both numbers ?

    I have a personal itunes account with an iPhone5s (perosnal mobile numer) and an iPad 4 mini (no SIMM). I have unlocked my old iPhone 4 to use for work on a different SIM and new number,
    Do you know if I can have all devices associated to my single apple ID and still use both numbers without messing up my profile. It has just changed my number over.

    I would not be able to give you idiot proof guide, since different games are different. Some of them have icloud integrated already, but those already taken care of. Some of them use specific logins and once you log - you get your info. General recommendation is to contact support sites of those games for enabling icloud instructions or enabling of transfer. There are other purely apple ways - like sync your phone in itunes and then sync apps with ipad, but those are only one time transfer. There is another way that is not typically recommended - restoring ipad from iphone backup. It may transfer your game content, but once again sync in the future has to be done by game.
    So if I were you, I would address that individually with every game provider.

  • Unity problems on adding new subscriber

    Dear sir,
    Following is the error mesage snapshot from Unity. The system encounter
    this message when removed voicemail box (32530) and try to add it back. We find subscriber based on the alias (extension
    number)but there is no record in the system. The unity version 4.0(4)Maybe the mailbox could be hiding somewhere and not synchronize with the system. You have any idea?
    thanks.

    what is the error message?
    you cannot simply remove a voice mail subscriber and add them back with the same alias.
    when you only delete the subscriber from unity, the alias still exists in AD and either must be removed before recreating the new subscriber or a new alias must be used.
    a good way to remove all pieces of a unity subscriber, including the AD alias, is to use the AD exchange tasks or manually delete the AD alias, unity subscriber and exchange mailbox.
    please see the following link for more info deleting subscriber accounts and the impact on exchange 5.5 vs exch 2000/AD:
    http://cisco.com/en/US/products/sw/voicesw/ps2237/products_administration_guide_chapter09186a008022c917.html

  • Unity problems with adding new subscriber

    Dear sir,
    Following is the error mesage snapshot from Unity. The system encounter
    this message when removed voicemail box (32530) and try to add it back. We find subscriber based on the alias (extension
    number)but there is no record in the system. The unity version 4.0(4)Maybe the mailbox could be hiding somewhere and not synchronize with the system. You have any idea?
    thanks.

    It is related to AD.
    Here is what you did:
    You probably deleted the Unity Subscriber from SA. Then you clicked the "ADD" new subscriber, and tried to create a new Unity Subribers AND AD account with the same Exchange Alias.
    You will need to do the following:
    Click Add to add new subscriber
    Select Import (instead of new)
    Find your old users you deleted from Unity
    Activate subscriber.
    There is a different in Unity SA when you delete. It only deletes the Unity AD attributes from the AD user/Exchange box. It does not remove the AD account/exchange box.
    hope this helps

  • SQL Server Transacational Replication Issue while adding a new article

    I have a "PULL" transaction replication toplogy (SQL server 2008 R2 - publisher,subscriber & distributor) in place and is working fie. I added a new article (table) using sp_addarticle and it works fine. Then I tried to add subscription
    to the new article using sp_adddsubscrition SPROC from the publisher (details below)
    EXEC sp_addsubscription @publication = @pub_name, @article = @article_name, @subscriber = @sub_server, @destination_db   
    = @sub_dbname, @subscription_type = N'pull',@update_mode = N'read only', @sync_type = 'sutomatic', @status = 'active', 
    @reserved ='Internal'
    I tried with all combination of values in the @sync_type parametr,
    The above command fails with the following message:
    Msg 14100, Level 16, State 1, Procedure sp_MSrepl_addsubscription, Line 533;
    Specify all articles when subscribing to a publication using concurrent snapshot processing.
    The sync_type value parameter is "replication support type" when the subscrition was added orginally to the publication. This trsnslates into a value of 3 (CONCURRENT)  in sync_method
    column on the outpout of sp_helppublication SP execution.
    What am I doing wrong? Please advise. Your help is much appreciated.
    Thanks in advance
    Kirti

    Thanks for your reposne, Mr. Cottr.
    It was a type-oin the value for @sync_type parameter in the sp_addsubscription call when I posted this article originally. It was actually set to "automatic".  I have posted the scripts per your request. These scripts are executed in SQLCMD mode in
    SSMS query qindow. Since this is a PULL subscription, thre is another script for pP-addpullsubscription that is not incldued in this post. If you need that also, I will be glald to post that also. Thanks again for your help.
    -->>>>>sp_addpublication:
    USE [master]
    GO
                           SQL Server Transactional Replication Related Scripts
    Function: Configuring publication on the database at the publisher
    -- TO DO: Parameters to set before executing this TSQL batch script
    :SETVAR pub_dbname                TestDB
    :SETvar pub_name                  TestDB-TranPub01
    :SETVAR distributor               DISTRIBSVR
    :SETVAR repl_admin_account        <domain>\<account_name>
                                       --replication admin account for non-prod environment
    :SETVAR repl_admin_password       <pwd>
                                       --password for replication admin account
    USE [$(pub_dbname)]
    SET NOCOUNT ON
    IF db_name() IN ('master', 'model', 'msdb', 'tempdb', 'distribution', 'DBA')
    BEGIN
       RAISERROR('Please set the user database name properly and rerun the script', 15, 100)
       RETURN
    END
    DECLARE @dynsql                        sysname
           ,@repl_ddl                      int
           ,@allow_initialize_from_backup  varchar(5)
    SET @repl_ddl                     = 1       -- preferred value is 0 (replication of DDL statements prohibited; manually enabled
    when needed only)
    SET @allow_initialize_from_backup = 'true'  -- preferred /do not change this value
    -- Adding the transactional publication
    DECLARE @desc     varchar(255)
    SET @desc = 'Transactional replication of database ' + QUOTENAME('$(pub_dbname)') +
                ' from publisher ' + QUOTENAME(@@servername) + '; Publication: ' + QUOTENAME('$(pub_name)')
    PRINT '1. Configureing publication ' + QUOTENAME('$(pub_name)') + ' on database ' + QUOTENAME('$(pub_dbname)') + ' ...'
    EXEC sp_addpublication
         @publication                  = '$(pub_name)',
         @description                  = @desc,
         @retention                    = 0,
         @add_to_active_directory      = N'false',
         @allow_push                   = N'false',      -- push subscription disabled
         @allow_pull                   = N'true',       -- pull subscription enabled
         @allow_anonymous              = N'false',   
         @allow_sync_tran              = N'false',
         @allow_queued_tran            = N'false',
         @allow_dts                    = N'false',
         @allow_initialize_from_backup = @allow_initialize_from_backup,
         @allow_subscription_copy      = N'false',
         @compress_snapshot            = N'false',
         @enabled_for_internet         = N'false',    
         @enabled_for_p2p              = N'false',
         @independent_agent            = N'true',
         @immediate_sync               = N'false',     
         @repl_freq                    = N'continuous',
         @replicate_ddl                = @repl_ddl,
         @snapshot_in_defaultfolder    = N'true',
         @status                       = N'inactive',   -- initialy publication is inactive / activated later after articles
    are added to the pblication
         @sync_method                  = N'concurrent'  -- preferred
    IF @@ERROR <> 0 RETURN
    PRINT '2. Configureing publication ' + QUOTENAME('$(pub_name)') + ' on database ' + QUOTENAME('$(pub_dbname)') + ' ...'
    EXEC sp_addpublication_snapshot
          @publication                 = '$(pub_name)',
          @frequency_type              = 1,
          @frequency_interval          = 1,
          @frequency_relative_interval = 1,
          @frequency_recurrence_factor = 0,
          @frequency_subday            = 8,
          @frequency_subday_interval   = 1,
          @active_start_time_of_day    = 0,
          @active_end_time_of_day      = 235959,
          @active_start_date           = 0,
          @active_end_date             = 0,
          @job_login                   = '$(repl_admin_account)',
          @job_password                = '$(repl_admin_password)',
          @publisher_security_mode     = 1,             --Windows authentiction
          @publisher_login             = '$(repl_admin_account)',
          @publisher_password          = '$(repl_admin_password)'
    IF @@ERROR <> 0 RETURN
    PRINT 'Executing sp_helppublication for ' + QUOTENAME('$(pub_dbname)') + '.' + QUOTENAME('$(pub_name)') + ' ...'
    EXEC sp_helppublication @publication = '$(pub_name)'
    PRINT 'Executing sp_helppublication_snapshot for ' + QUOTENAME('$(pub_dbname)') + '.' + QUOTENAME('$(pub_name)') + ' ...'
    EXEC sp_helppublication_snapshot @publication = '$(pub_name)'
    --->>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    -->>>>sp_addsubscription
    USE [master]
    GO
                           SQL Server Transactional Replication Related Scripts
    Function: Register the (pull) subscription at the subscriber
    -- TO DO: Parameters to set before executing this TSQL batch script
    :SETVAR publisher_dbname          TestDB
    :SETvar publication_name          TestDB-TranPub01
    :SETVAR subs_server               SUBSVR
    :SETVAR subs_dbname               TestDB
    :SETVAR distributor               DISTRIBSVR
    :SETVAR repl_admin_account        <domain>\<account_name
                                      --replication admin account for non-prod environment
    :SETVAR repl_admin_password      <pwd>
                                      --password for replication admin account
    USE [$(publisher_dbname)]
    SET NOCOUNT ON
    IF db_name() IN ('master', 'model', 'msdb', 'tempdb', 'distribution', 'DBA')
    BEGIN
       RAISERROR('Please set the user database name properly and rerun the script', 15, 100)
       RETURN
    END
    DECLARE @dynsql                        sysname
           ,@distibutor                    sysname
           ,@subscriber                    sysname
           ,@pub_dbname                    sysname
           ,@pub_name                      sysname
           ,@pub_login                     sysname
           ,@pub_password                  sysname
           ,@dest_dbname                   sysname
           ,@job_login                     sysname
           ,@job_password                  sysname
           ,@repl_ddl                      int
           ,@allow_initialize_from_backup  varchar(5)
    SET @pub_dbname                   = '$(publisher_dbname)'
    SET @pub_name                     = '$(publication_name)'
    SET @subscriber                   = '$(subs_server)'
    SET @dest_dbname                  = '$(subs_dbname)'
    SET @distibutor                   = '$(distributor)'
    SET @job_login                    = '$(repl_admin_account)'  
                                         -- used by replication agents to connect
    to publisher for queued updating subscriptions
                                         -- make sure account has DBO access on subscriber
    db
    SET @job_password                 = '$(repl_admin_password)'
    PRINT '1. Adding subscriber for pull subsctiption of publication ' + QUOTENAME(@pub_name) + ' on database ' + QUOTENAME(@pub_dbname) + ' ...'
    EXEC sp_addsubscription
         @publication       = @pub_name,
         @article           = 'all',
         @subscriber        = @subscriber,
         @destination_db    = @dest_dbname,
         @subscription_type = N'pull',
         @update_mode       = N'read only',
         @sync_type         = 'replication support only',
         @status            = 'active'
    IF @@ERROR <> 0 RETURN
    Execute sp_helpsubscription @publication = 'FTBTrade_TEST-TranPub01'
    --@pub_name

  • Error while adding a new col with check constriant

    Hello
    I tried adding a new column with check constraint but giving the error please correct me..
    drop table testchk
    create table testchk(typenm varchar2(5))
    insert into testchk values('mon')
    alter table testchk add typechk varchar2(5) default 'both' constraint chk_test check(typechk in('m','d') and typechk is not null)For the alter comman getting the ORA-02293 cannot validate error..
    I dont want to create any other constriant like not null etc .. but need only one check constriant
    Thanks

    You cannot assign a default value = 'both' while the constraint allows only 'm' or 'd'.
    This will work:
    ALTER TABLE testchk ADD typechk VARCHAR2(5) DEFAULT 'both'
    CONSTRAINT chk_test CHECK(typechk IN('m','d', 'both') AND typechk IS NOT NULL);Edited by: kordirko on 2010-05-14 18:41

  • Error while adding a new method to the Session Bean

    Hello everyone. I'm using jdev 11g, ejb, jpa & jsf. Everything works fine. But when I try to add a custom method to the Session Bean, I'm having an error.
    Here is my steps:
    1) I added a new method to SessionBean.java. Something like this:
    public void Hello() {
    System.out.println("Hello!");
    2) Then using Structure palette I exposed this method through Local interface and created data control
    3) Finally, I made a command button binded to this method (just droped it from DataControls.dcx to my page)
    When I start the page and click the button, I'm having the following error:
    Error 500--Internal Server Error
    javax.faces.el.EvaluationException: Method not found: Hello.execute(javax.faces.event.ActionEvent)
         at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1227)
         at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:70)
    ... (I've truncated the log because there is nothing important in the missing part)

    Yes, I have binding in the page def. Everything is correct there:
    <methodAction id="Hello" RequiresUpdateModel="true" Action="invokeMethod"
    MethodName="Hello" IsViewObjectMethod="false"
    DataControl="PriceServiceLocal"
    InstanceName="PriceServiceLocal.dataProvider"/>
    I've droped the method from the Data Controls panel

  • Error while adding a new field to the Segment in we31

    Hi ,
    I am getting error when i am trying to add the new field to the cust. segment.
    It is released for the adding the new fields i am cancelling the release , but i got a message like this
    Error while resetting release of segment 'segment name'.
    it is comming from the message class EA and message number 259.
    Thanks in advance.
    Reagrds,
    bharani

    Hi,
    Have you tried Cancelling the release before adding the version?
    Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
    Please let me know if it worked!
    Vijay

  • We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

  • Adding a New Dimension to a CUBE

    Hello
    Being in new at Oracle OLAP...
    If I need to add a new dimension, SHOULD I RECREATE the cube entirely again??
    Is not there any other way??
    Regards

    Each cell in a cube is referenced by a dimension. Think of it as pointers to cells in a multi-dimensional array.
    So when you add or remove a dimension, what should happen to all those cells.
    In a way you are breaking the cube.
    Since cube data is loaded from a table, you can always re-load your cube after adding or removing a dimension.
    Dimensions are not added/removed frequently, once the design is finalized. You may add a new hierarchy to existing dimensions, which is done more frequently compared to adding a dimension. After adding a new hierarchy, you just have to re-aggregate cube data and not re-load from relational source.
    Cubes are created for reporting, and can be deleted/recreated or truncated - monthly, quarterly or yearly - for various reasons.
    Your source transactional detailed data should be in one (or more) fact tables and should never be deleted.
    Is there any "operational" concern in a Production environment, because of which you are asking this question?
    One trick could be: to create the new cube (with more dimensions or less dimensions than the original cube) and then COPY DATA from original cube into that new cube.
    But it may take the same amount of time as re-loading the new cube from the relational source.

Maybe you are looking for