Adding a new VM to a Delivery Controller in Citrix XenApp 7.5

Hi Guys
I have a Citrix site that has a Machine Catalog setup and a Delivery Group set up that sees the machine in the Machine Catalog.
I have recently added a new server with a slightly different set of applications etc, I have been able to add the new server to the Machine Catalog but it doesn't show up in the Delivery Controller so the new server is not available to log onto.
As far as I can tell the VDI is installed on the new server.
Any suggestions ?
Thanks
Matthew
This topic first appeared in the Spiceworks Community

Sorry I numbered them to show the flow of information, this was also just a place for me to store info as I worked through it. I managed to get it to work by creating a partition that takes up the whole drive and is actually 22 GB larger than all the other drives (since I found out that the had root, swap and home partitions that are no longer needed).
I should be able to resize the other partitions without a problem, correct? They're EXT4. Should I unmount the raid array and do them individually, remount the array, let it sync and do the next? Or just unmount the array, resize all of them, mount it and let it sync?

Similar Messages

Create Delivery from a Sales Order adding a new position

Hi experts!
I need to create a delivery from an existing Sales Order (with just 1 position), and add a new position to this Delivery so it creates with two positions, the one from the SO and the added one.
I'm using FM RV_DELIVERY_CREATE. Is it possible to do this?
Thanks!!
Carles

Hi Carles,
I would prefer BAPI_OUTB_DELIVERY_CREATE_SLS. At least the delivery creation will be fine, your second position might be more complicated. But there are exits in the Bapi and you might go for an exit of the delivery creation itself -> then also manual triggered creation of a delivery will be correct.
BR, Christian

ADDING A NEW ITEM IN THE CREDIT REQUEST DETAILS PAGE.

Dear friends,
Please help me with this scenario.Thanks so much for your help.
Task: ADDING A NEW ITEM IN THE CREDIT REQUEST DETAILS PAGE.
Need to create a new item on this page called "approver notes" (column notes).
Can this be achieved by personalization?
Scenario:
On credit request details page disputed invoice number, request date, status, bill to, ship to, etc are displayed.
When the status is "not approved”, item should be displayed along the "rejected" comment.
If the status is other than "not approved" then the item should not be displayed.

what page is this ? are you sure it is a OAF page ?
If it is a OAF page, you would need to extend the controller to fire a partial action for the item and then control the display property of the comments field
Tapash

Problem adding a new tab to e-Recruiting

Hi,
I am facing the following problem in adding a new tab in the E-Recruitment (Manpower Requisition) application. The developer had created a new BSP page of the following information.
Name space: SAP
Application: ZHR_MPOWER_REQ
Controller URL: MPR.DO
A customized element (9001) had also been created with the above information.
I have also created a context ZTEST and a Container Seq '1000' and under the Container Seq, I have allocated a few assignment of Element of which I have assigned the new element - 9001.
Having assigned the above, I am still unable to see the new tab in the link. Please let me know if there are any missing steps.
Thanks.

Dear,
Just want to check, r u able to Run the Custom BSP as a Standard alone application ?.
Have you Configure T77RCF_APPl_LOG table ?.
Alvin, i could not see why you could not see the BSP Page.
Please got to t-code SLG1 and check the log's why it's not coming.
Could you please give more details, what you have done.
Thanks & Regards
Sabba Ravi

EP6 SP2 - Adding a new Dialog Instance

Hi,
I have two physical hosts. Host A was installed with State Controller, Dispatcher A and Server A. Recently, I have added a new Host B with Dispatcher B and Server B. Host A is the Central instance while Host B is the new Dialog instance. When I startup the node Server B in Host B, it was trying to synchronise the files with Host A but it ran into an error during synchronization. In node Server B, it was complaining of some error during startup with the go.bat. The error was :
Start synchronizing application irj. More details about the synchronization can
be found in INFO log files.
Application irj was locally stopped.
[com.sapportals.portal.prt.dispatcher.Dispatcher@10b0fd, 12/27/04 4:50:54 PM SGT
, System_Thread_12] Exiting main initialization procedure because of exception:
java.lang.NoClassDefFoundError: com/sap/portal/prt/sapj2ee/bridge/IAccessor
        at com.sapportals.portal.prt.runtime.Portal.getLogger(Portal.java:402)
        at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:283)
        at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalC
oreInitializer.java:54)
        at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalI
nitializer.java:129)
        at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitiali
zer.run(Dispatcher.java:160)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispat
cher.java:358)
        at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher
.java:40)
        at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispat
cher.java:113)
        at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:
391)
        at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(Serv
letContextFacade.java:3338)
        at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(Serv
letContextFacade.java:2596)
        at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.deploy(Serv
letsAndJspImpl.java:520)
        at com.inqmy.services.servlets_jsp.server.WebContainer.commitDeploy(WebC
ontainer.java:258)
        at com.inqmy.services.deploy.server.DeployServiceImpl.synchronizeLocal(D
eployServiceImpl.java:4441)
        at com.inqmy.services.deploy.server.DeployServiceImpl.synchronizeLocal(D
eployServiceImpl.java:4370)
        at com.inqmy.services.deploy.server.DeployServiceImpl.synchronizeApplica
tions(DeployServiceImpl.java:4293)
        at com.inqmy.services.deploy.server.DeployServiceImpl.makeSynchronizatio
n(DeployServiceImpl.java:3943)
        at com.inqmy.services.deploy.server.DeployServiceImpl.afterContainerStar
t(DeployServiceImpl.java:3935)
        at com.inqmy.core.service.context.event.ContainerEventListenerWrapper.ru
n(ContainerEventListenerWrapper.java:146)
        at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
WARNING: Dispatcher could not be set up:
javax.servlet.UnavailableException: Initialization of Dispatcher failed
javax.servlet.UnavailableException: Initialization of Dispatcher failed
        at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispat
cher.java:370)
        at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher
.java:40)
        at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispat
cher.java:113)
        at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:
391)
        at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(Serv
letContextFacade.java:3338)
        at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(Serv
letContextFacade.java:2596)
        at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.deploy(Serv
letsAndJspImpl.java:520)
        at com.inqmy.services.servlets_jsp.server.WebContainer.commitDeploy(WebC
ontainer.java:258)
        at com.inqmy.services.deploy.server.DeployServiceImpl.synchronizeLocal(D
eployServiceImpl.java:4441)
        at com.inqmy.services.deploy.server.DeployServiceImpl.synchronizeLocal(D
eployServiceImpl.java:4370)
        at com.inqmy.services.deploy.server.DeployServiceImpl.synchronizeApplica
tions(DeployServiceImpl.java:4293)
        at com.inqmy.services.deploy.server.DeployServiceImpl.makeSynchronizatio
n(DeployServiceImpl.java:3943)
        at com.inqmy.services.deploy.server.DeployServiceImpl.afterContainerStar
t(DeployServiceImpl.java:3935)
        at com.inqmy.core.service.context.event.ContainerEventListenerWrapper.ru
n(ContainerEventListenerWrapper.java:146)
        at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
Synchronization of missing application [irj] successfully completed.
Start synchronizing application MetaMatrix. More details about the synchronizati
on can be found in INFO log files.
Error : Background synchronization of application [MetaMatrix] did not succeed
, because : java.rmi.RemoteException: Error occured while synchronizing applicat
ion [MetaMatrix]. Committing deploy to container - EJBContainer failed.com.inqmy
.services.deploy.container.DeploymentException: ID020230 Cannot load bean <com.m
etamatrix.metadata.server.serverapi.MetadataServerAPIHome>, because Exception oc
cured in object instantiation: java.lang.NoClassDefFoundError: com/metamatrix/ap
i/exception/MetaMatrixComponentException; nested exception is:
        com.inqmy.services.deploy.container.DeploymentException: ID020230 Cannot
load bean <com.metamatrix.metadata.server.serverapi.MetadataServerAPIHome>, bec
ause Exception occured in object instantiation: java.lang.NoClassDefFoundError:
com/metamatrix/api/exception/MetaMatrixComponentException
Any help would be appreciated...
Thanks.
regards,
Mike

Hi..
Do you plan have load balancing setup..then you can go for installating another dialog webas java for your existing portal..
youcan get the installation document at service.sap.com
https://websmp103.sap-ag.de/instguides..
see the webas java installation
You can install another webas java and connect to you existinfg portal as dialog instance...
Thanks
Gopal
(avoid points if it is useful)

Error while adding a new col with check constriant

Hello
I tried adding a new column with check constraint but giving the error please correct me..
drop table testchk
create table testchk(typenm varchar2(5))
insert into testchk values('mon')
alter table testchk add typechk varchar2(5) default 'both' constraint chk_test check(typechk in('m','d') and typechk is not null)For the alter comman getting the ORA-02293 cannot validate error..
I dont want to create any other constriant like not null etc .. but need only one check constriant
Thanks

You cannot assign a default value = 'both' while the constraint allows only 'm' or 'd'.
This will work:
ALTER TABLE testchk ADD typechk VARCHAR2(5) DEFAULT 'both'
CONSTRAINT chk_test CHECK(typechk IN('m','d', 'both') AND typechk IS NOT NULL);Edited by: kordirko on 2010-05-14 18:41

Error while adding a new method to the Session Bean

Hello everyone. I'm using jdev 11g, ejb, jpa & jsf. Everything works fine. But when I try to add a custom method to the Session Bean, I'm having an error.
Here is my steps:
1) I added a new method to SessionBean.java. Something like this:
public void Hello() {
System.out.println("Hello!");
2) Then using Structure palette I exposed this method through Local interface and created data control
3) Finally, I made a command button binded to this method (just droped it from DataControls.dcx to my page)
When I start the page and click the button, I'm having the following error:
Error 500--Internal Server Error
javax.faces.el.EvaluationException: Method not found: Hello.execute(javax.faces.event.ActionEvent)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1227)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:70)
... (I've truncated the log because there is nothing important in the missing part)

Yes, I have binding in the page def. Everything is correct there:
<methodAction id="Hello" RequiresUpdateModel="true" Action="invokeMethod"
MethodName="Hello" IsViewObjectMethod="false"
DataControl="PriceServiceLocal"
InstanceName="PriceServiceLocal.dataProvider"/>
I've droped the method from the Data Controls panel

Error while adding a new field to the Segment in we31

Hi ,
I am getting error when i am trying to add the new field to the cust. segment.
It is released for the adding the new fields i am cancelling the release , but i got a message like this
Error while resetting release of segment 'segment name'.
it is comming from the message class EA and message number 259.
Thanks in advance.
Reagrds,
bharani

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

Adding a New Dimension to a CUBE

Hello
Being in new at Oracle OLAP...
If I need to add a new dimension, SHOULD I RECREATE the cube entirely again??
Is not there any other way??
Regards

Each cell in a cube is referenced by a dimension. Think of it as pointers to cells in a multi-dimensional array.
So when you add or remove a dimension, what should happen to all those cells.
In a way you are breaking the cube.
Since cube data is loaded from a table, you can always re-load your cube after adding or removing a dimension.
Dimensions are not added/removed frequently, once the design is finalized. You may add a new hierarchy to existing dimensions, which is done more frequently compared to adding a dimension. After adding a new hierarchy, you just have to re-aggregate cube data and not re-load from relational source.
Cubes are created for reporting, and can be deleted/recreated or truncated - monthly, quarterly or yearly - for various reasons.
Your source transactional detailed data should be in one (or more) fact tables and should never be deleted.
Is there any "operational" concern in a Production environment, because of which you are asking this question?
One trick could be: to create the new cube (with more dimensions or less dimensions than the original cube) and then COPY DATA from original cube into that new cube.
But it may take the same amount of time as re-loading the new cube from the relational source.

Adding a new account in Team Foundation Server

I have a problem with adding of new accounts into Team Foundation Server 2010. I can add a new domain account into group Contributors of my team project without problems but after that I can't see it in the list of available accounts, for example, in the
drop down list 'Assigned To' at a work item page.
The added user can see the project, do check-in and check-out but he can't get access to the project work items. He has got an error
TF201072: A user or group could not be found. Verify that the users and groups used in your work item type definition have been added to Team Foundation Server.
Can anybody help me?

Hi Jovanny66,
Thanks for your reply.
We don’t recommend to edit the TFS database(s) directly, it may cause the unknown issues.
To edit data in TFS Server, we should edit the data through VS, Web Access, TF command or TFS API. Unless there’s an official SQL Server script to edit TFS data which provided by MS.
As you edited the dbo.Constants table to update user’s data, but the user’s data also included in other
TFS tables too, there’s the key connection relationships between these tables, if we update this user’s data in Web Access, TFS Sever will update this user’s data in all the related tables automatically. But you manually edited this user’s data only
in dbo.Constants table, so the edited data not included in other related tables, it may cause the current issue.
For the edit TFS database issue, you need contact a Professional Support Service at
http://support.microsoft.com/select/?target=assistance to gain more support on this case.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Issues with Writing back data to Planning Cube After adding a new characterstic

Hello,
We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
This new characteristic is also present in the reporting cube and has been added and transferred to MP.
This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
~~Characterstic combination cannot be assigned to part provider ~~
~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
~~ Entered values are incorrect:Correct before navigation ~~
The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
regards,
Karthik

Hi,
Try to check that all characteristics are correctly assigned at multiprovider level.
hope it helps

I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now on my device and no matter how many ways I try its not worked

I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now showing on my device and no matter how many ways I try its not able to show any more.
Does anyone know why this is happening and how to rectify the situation as I have tried every help setting for the last 4 hours.

I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpe

Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpectedly. These things happen. I want to sign up for the Photography plan but I also have a Windows Vista laptop, and that is old too so I may want to put the apps on a new desktop and a new laptop, having already installed on my desktop. That makes three activations. Am I allowed to do this? Cheers. Paul

You cannot have three activations. It's simply not technically possible. If and when the time comes, you simply deactivate/ sign out on one of the old systems and install on the new one. If the system goes belly up, you contact support to reset your account. No need to make it more complicated than that and overthink it.
Mylenium

I want to create a new folder on my external hard drive for photos. Even though I added the new folder button to the tool bar it is not highlighted so I cannot click on it to create a new folder on this drive.

I have an external hard drive that I would like to pre-make a new folder before I import photos into it. Even though I added the new folder app to by toolbar, it is not highlighted and I cannot use it. It will only let me create new folders if I upload to iPhoto. That is not where I want to store everything. So I need to figure out how to turn on or activate New Folder on my toolbar for all possible downloading options.

If it's a drive that you've previously used with a PC, just double-check the format - click the drive once on the desktop to highlight it, and click cmd-i (the command key and the i key together) to see the Info window. That will tell you, under Format, how it's formatted.
If it's "NTFS", that's the current Windows format. You can read but not write to it with a Mac. If you want full read/write access, you should look into Paragon NTFS, which allows you to do both. Note that some features of te Mac (Time Machine, for example) will only work with Mac-formatted drives.
Matt

Adding a new VM to a Delivery Controller in Citrix XenApp 7.5

Similar Messages

Maybe you are looking for