Adding a page to chpt forces all successive chpts in book to reflow and repositions all pix and captions

Is there a way to keep ID CS6 from automatically doing this? Do I need to add 2 pages? All chpts start on righthand pages.

I already have the first tag in the chapt set up to start on an odd page. So the text starts on an odd pg but I end up with a blank pg to start the succeeding chpts (and then the text starts on the following odd pg)
This is especially annoying because the spread pages are mirror images with a thin column running along the fore edge for captions. Shuffling in an extra pg moves all pix and captions out of position.

Similar Messages

  • Can I transfer photos from old macbook to iMac and put all photos on a new external drive without losing any photos?

    Had to purchase new Macbook so all devices could sync with Yosemite.   I use iMAC and Macbook with iPhone, etc.  I have many photos over years and do scrapbooking.  I want to preserve my pix on an external hard drive and organize them.  I am currently using external drive on iMAC and a separate one on Macbook that is outdated.  I use them with TM for backup.  Can I transfer pix data only to the iMAC via a transfer cable and then send all photos to new external drive for access and safe storage?  I am confused about backup not preserving my photos.  Help please me transfer and save my pix and properly set up my external for access.  Thanks a bunch!

    connie,
    I assume you are storing your photos in an iPhoto library, since you are asking in the iPhoto forum?
    if you want to store your iPhoto library on an external drive and keep them safe, you need two external drives.  One drive to store the working copy of the photo library, that you are using to work with your photos,  and one drive for time machine to make back copies of your iPhoto library.
    Can I transfer pix data only to the iMAC via a transfer cable and then send all photos to new external drive for access and safe storage?
    You could simply plug your new drive into the MacBook and copy the library from the old drive to the new. Then connect the new drive to your iMac and use the iPhoto library there.
    Make sure, your new drive has the correct file system - MacOS Extended (Journaled) .  See this link:  iPhoto: Issues with FAT32-formatted drives
    -- Léonie

  • Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

  • In Yahoo Mail, when composing an email I get an "Asking to leave this page" panel; it does not matter whether i choose stay or leave, the panel pops up again....and again...the only way out is to Force Quite Firefox and start all over...help please...

    In Yahoo Mail, when composing an email I get an "Asking to leave this page" panel; it does not matter whether i choose stay or leave, the panel pops up again....and again...the only way out is to Force Quite Firefox and start all over...help please...

    Thanks for responding....but isn't your potential solution designed for Windows users? I have a Mac.
    If it does apply to Mac, I am also hoping for something simpler as this could take weeks to isolate the problem and it would be more efficient to use another browser for mail
    Also, I should have added, this problem occurs only occasionally and seemingly only when I am taking some time to compose a message

  • Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text)  I'd like students to be able to view my comments on printed version of their papers.

    Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text)  I am a teacher, and I would  like students to be able to view my comments on printed versions of their papers. I know word displays the comments off to the side of the document, and those comments can be viewed all at once and printed alongside the document.

    There doesn't appear to be a way to print conmments in either Pages or Numbers in the Mavericks versions.
    Jerry

  • I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?

    I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?

    Is your printer selected? <br />
    Is '''Print to File''' selected, where the web page is being printed to a file and not being sent to your printer?
    See the screenshot below.

  • Adding a page path to an "all items in page group" SELECT?

    I have a case where a client's asked me to produce a "report" (nothing fancy, so I'm thinking a basic SELECT right out of the DB here rather than a full solution like Discoverer or Business Objects) for them on all items in particular page groups in our Portal (v10.1.2.0.2).
    I have a query that Oracle Support provided which I can fiddle with a bit to get most of the info I need:
    select I.ID, I.display_name, I.name, I.itemtype, P.name
    from PORTAL.WWSBR_ALL_ITEMS I,
    PORTAL.WWSBR_ALL_CONTENT_AREAS CA,
    PORTAL.WWSBR_ALL_FOLDERS P
    where CA.name = 'MY_PAGE_GROUP'
    and P.caid = CA.id
    and I.caid = CA.id
    and I.folder_id=P.id
    and I.active=1
    and I.is_current_version=1
    and I.visible=1
    and I.itemtype in ('basefile','baseimagemap','basetext','baseurl');
    ...however, what I'd like to do is add a "page path" column; that is, one that would trace up the tree from the item's page to the root of the page group and present something like "My Page Group > Departments > HR" like you get in Portal Navigator.
    I can think of how to do this, conceptually, by tracing through the parent pages in WWSBR_ALL_FOLDERS, but what I'm not quite sure about is how to do it for an arbitrary depth in the page tree - i.e., the page can be any (reasonable) number of levels from the page group's root.
    Any thoughts? I'd prefer to do this as a basic SQL query if at all possible, but writing a little reusable PL/SQL procedure to do it isn't out of the question. My knowledge of PL/SQL is pretty rudimentary but I have enough programming experience in other languages that I could probably manage to bumble through it if necessary.
    Thanks.

    First create a page that can contain two regions. One for a page-path item, and another to have a report portlet.
    For the page-path, you can have another region in your page. Then edit this region to make it items type. Now add an item of type 'Page Path', with depth 3.
    Now, you can create a portal report based on your SQL query, publish it as portlet, add it on that page as portlet.
    That will give you exactly what you have described you want.
    hope that helps!
    AMN

  • Firefox 3.6.12 & 13 seem v. fallible. It will often refuse to load websites, fail to act on commands on harmledss web pages and will not relaunch once switched off (forcing me to reboot). Why is this ? After all its a great incentive to switch to Crome.

    This never happened with previous versions. Today it just remained inert when I tried to reach a whole range of websites - all perfectly harmless. I use a Swiss newspaper website (Le Temps) and on some long articles it gives one a print option which shows all pages in ther article on one screen, without going from page to page. the new versions just refuse to act on the print command and bring up the screen I need. Equally it will not act on a screen which asks one to say which days you want to order a book on the British library site. And once switched off, if you attempt to call it up again, icon flashes once and stops. Nowt happens.

    Did you read the comments, either on the AUR page or in the output that you posted? They explain it.

  • Help!! adding new pages to doc with logo!!!

    I've posted various questions for a couple hours now, none are answered.  Is everyone sleeping or does no one know how to use Pages??  I'm near tears and I've read the manual about 10 times and don't understand it.  I've tried to Google it but I'm not even sure what exactly to Google.
    I have an 18 page document in Pages.  It's just a plain old word processing document.  A list of Gluten Free restaurants in my area.  I add new restaurants to this list all the time so it needs to re-order itself as it does as a plain word processing document.
    I want to brand it more so I'm putting my logo and a little design in the bottom left corner of each page, or at least thats how I'd like it to look.
    So I set up page one, saved it as a template, captured it, done everything I can think of. But when I copy the document and paste it into the text boxt on the first page of the new document with the little logo on the page, all the subsequent pages do NOT have that logo on them.  Just the first page. 
    IF I set up 18 pages with the logo, and then paste it just adds 17 blank pages after that first page with the logo.  And those 17 pages that I set up prior to pasting are after the pages it added after the paste that have no logo.
    How do it get this to add a page with the logo in the corner??
    So when I add 5 new restaurants and it has to add a page to fit them it it will have that logo.  This can't be that hard to do.  I need the doucment to automatically add new pages when text is add and those pages need to have the logo,
    Please help me!!!
    Susan

    I'm sorry you think that Peter and it isn't true.  Maybe you are testy because its 2 am.
    I spent hours trying to figure it out on my own.  I looked all over these forums, I Googled it, I went to other Apple tips and forums I am familar with, went thru the manual.  I tried a lot of places first so I really don't think I'm demanding and I'm sorry if I came off that way. 
    I was just super frustrated.  Not being very computer savvy can be super frustrating, often I find what I "think" might be the answer for something I'm looking for and I can't even understand the answer.  I try, I follow the steps but some of the terms I don't know and then have to google and follow more steps and blah blah. 
    I'm sorry but I didn't just come here without doing research first for the answer, so its not fair to say I expected others to do the work for me.  I did try.  I agree the information here us beyond useful, I never could have done anything without out in the past, I've used it many times.  But you can shoot the messenger if you want but the response time does seem slower.  Not sure why you take that personally. 
    I'm sorry to **** you off so much. 

  • I have a mac air and an iMac and both have Pages. I use Pages on my air and save all documents to iCloud. I can see them on my iMac but it won't open with Pages. It becomes visible if I change it to open with preview but I can't interact with it.

    I have an mac air and an iMac 5k - pages runs on both.  I use pages on my air and save all my documents to iCloud drive. I can see the documents on my iMac but some won't open in pages which is bizarre? They will open if I change it to open with preview but then all I can do is read it  - I can't add to the document - All I want is to be able to see all my documents on all my devices and to be able to have them sync so I can add to the documents from  any of my devices. I also have an iPhone 6 and an iPadair2 but I would be happy just to have the iMac and macair sync for starters. I have folders within folders in my documents,. The folders which contain pdf's and individual files open OK . The one I am having difficulty with is the file which I use for ongoing correspondence - in other words it is quite long - I keep adding to it  ( by copying letters in and letters out so I can see a sequential history of what has been going on by scrolling down ) in date order so that it could be 1 - 100 pages long - but I don't think the size is a problem. I don't understand why some folders can open and others not . Has anyone any suggestions please. I have been trying to get this to work for months since iCloud drive came in. It has got much better but it is still not good enough  - or maybe it's me?

    All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

  • Since i updated latest version 6.0.2, it keeps getting stuck and goes really slow and the coloured beach ball spins for ages, so all i can do is force-quit - how can i install the version before this version again?

    On a Mac Book pro - running 10.6.8
    Firefox was fine until the last couple of updates that happened without my consent (?).
    Suddenly there were weird errors and crashes of Flash
    and slow loading pages. Now it's gone into rubbish mode where
    the beach ball spins at the slightest fast type or double-click and then all i can do is force quit.
    It's as if it can't cope with anything anymore.
    How do i uninstall and keep my bookmarks etc and re-install an earlier version of it as it was before it got updated?
    Thanks

    Hey Thanks for the link thing!
    So i had tried it in safe mode, and thought that it was still in SMode but then realized that that stopped once i had closed it and reopened in aft/eve/ last night and started up again today, also. So i just tried it again in safe mode and it seems to not be doing it...but then it's so random anyway. But if i'm in safe mode like this there is no toolbar but i guess that's cool if that is what is making it sluggy and beach ball-y. But how do i stay in safe mode all the time? And if it is only in safe mode then does that mean i can't have the 3 addons i use - (java, QT, Flash- all the other vid things like divx etc are 'disabled' ) I thought those add ons were necessary to play/read things on the net?? Forgive my ignorance in this matter. But saying that, when it was going wrong, and i was clicking on audio links sometimes in the 'blank white page scenario' a popup would come and tell me that i would need ' QuickTime to play this track' and i would click 'continue' and it would link me to Apple to get QT...but i already have QT installed in my MBPro so i thought that was a bit weird...! when i just tried it now in safe mode it went straight to the audio link white page with player in the middle and played the track. But then as i said, it was a bit random before so i don't know if this was just a time when it worked...
    Anyway, what do you think about my questions on operating in safe mode...should i have to do that?! i'll stay in Safemode until i hear back from you and see how well it performs.
    Thanks for your help.

  • Firefox constantly freezes on my Mac, although I've installed the latest version and tried all suggested fixes - without success.

    I used Firefox up to version 3.5 and it worked well. But ever since, FF has frozen as soon as I've opened a webpage other than Google. FF even freezes when I'm in Mozilla's help pages !
    I have trashed and reinstalled several times, updated constantly as suggested. I'm now using (or trying to use) version 25. No success.
    I have done everything that was suggested :
    - trashed and reinstalled ( several times over the years, to see if new versions of FF would work)
    - restarted FF in safe mode
    - tweaked the profile as recommended
    - I've painstakingly checked that all my plug-ins etc were up to date. They are.
    None of these solutions have worked. As I have written more than once, none of them should be necessary : Firefox should "just work". After all, other browsers do - I use Safari and Chrome, for instance, as well as SeaMonkey. Does any
    one know what's happening ?
    I'm now running Mac OS 10.9.

    A moderator (AliceWyman, whom I thank for her post) suggests I reset Firefox. I've done that, more than once.
    The problem remains. And so does my question : why does Firefox keep on hanging/freezing ?
    Why should fixes be necessary? Mozilla, in its Firefox page, generously offers the browser free, and users assume that it will, simply, work. In my case, it doesn't.
    And as I've said: I've tried a whole range of fixes and workarounds (that aren't necessary with other browsers) and they haven't worked. If my iMac can handle all the other browsers with no problem, this indicates that the computer works, and that the other browsers do too. So this problem seems to be a specific Firefox one.
    As I've already said, I could just give up and use Safari, Chrome, Chromium, SeaMonkey, Maxthon, or Slimboat, for instance.
    But it irks me that FF, with such a good reputation (it's the third most widely used browser), should behave in this way.
    "Different by design", says its webpage. Well, it's certainly different. Can anyone help? I've been asking these questions, trying "fixes", trashing and clean-reinstalling for about a week now.

  • I opened a website that said that all of my files had been encrypted. A popup appeared and asked if I wanted to leave the page, but when I tried to, it wouldn't let me.  How do I know if this is a real problem or not?

    I was researching information for a class and I clicked on a website that said that all of my files had been encrypted.  A popup appeared and asked if I wanted to leave the page but when I tried to, it would let me.  I had to force quit Safari in order to do so.  How do I know if this is a real problem or not? 

    It's a JavaScript scam that only affects your web browser, and only temporarily.
    1. Some of those scam pages can be dismissed very easily. Press command-W to close the tab or window. A huge box will pop up. Press the return key and both the box and the page will close. If that doesn't happen, continue.
    2. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Security
    and uncheck the box marked Enable JavaScript. Leave the preferences dialog open.
    Close the malicious window or tab.
    Re-enable JavaScript and close the preferences dialog.
    3. If the Preferences menu item is grayed out, quit Safari. Force quit if necessary. Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.

  • How to open image added to Pages doc in Preview app?

    Hello,
    Anyone know hot to open images added to Pages in preview app on Mac? When I click on any image with right mouse button I have in menu these options - "Open in Pixelmator and Capture selection from screen".
    I tried to make my own Automator service "Open img in Preview" and it work well in Finder and other apps (I selected it in Automator option to work in all apps) but this service is not show in Pages > Services.
    Anyone know how to fix it or how to make this service visible in Pages? I tried to found "Open in Pixelmator" workflow on my Mac to rewriting or save my "Open img in Preview" workflof into same folder but no chance. In (Library > Services etc)
    Thank you for you kind, sorry for my English
    Jan.S

    I don't know how Pixelmator created their Service, but I suspect it involves programming that is beyond my abilities.
    The following AppleScript will copy the selection in Pages and open a new preview window from the clipboard. It could be run as a Service with Automator. (It will also leave the image on the clipboard; if that is a problem, it could probably be modified, but I didn't get that sophisticated with it.)
    tell application "System Events"
              tell process "Pages"
                        set frontmost to true
      click menu item "Copy" of menu 1 of menu bar item "Edit" of menu bar 1
              end tell
              tell process "Preview"
                        set frontmost to true
                        click menu item "New from Clipboard" of menu 1 of menu bar item "File" of menu bar 1
              end tell
    end tell

  • Field "Location of Linked Object" missing after adding a page to a role

    I am using EP5 (5.06.01.00). After adding a page to a role, the properties of the page in the role no longer include the field "Location of Linked Object". The properties now only consist of two fields: "Name" and "Location". They used to contain a third field "Location of Linked Object", in fact, in older roles the page properties still contain this field. However, when I now add pages to a role or workset, this third property field "Location of Linked Object" is not there. - I am adding the page by clicking the "Add" button to move a page from the "View" area to the role in the "Edit" area. - I have been observing this symptom for several months, but I can not identify any configuration changes or upgrades which would have caused this behavior.
    All hints will be greatly appreciated.
    Thank you
    Message was edited by: Carsten Mund

    I am using EP5 (5.06.01.00). After adding a page to a role, the properties of the page in the role no longer include the field "Location of Linked Object". The properties now only consist of two fields: "Name" and "Location". They used to contain a third field "Location of Linked Object", in fact, in older roles the page properties still contain this field. However, when I now add pages to a role or workset, this third property field "Location of Linked Object" is not there. - I am adding the page by clicking the "Add" button to move a page from the "View" area to the role in the "Edit" area. - I have been observing this symptom for several months, but I can not identify any configuration changes or upgrades which would have caused this behavior.
    All hints will be greatly appreciated.
    Thank you
    Message was edited by: Carsten Mund

Maybe you are looking for