Adding a plug-in to just one audio file?

Hello,
I'm really new to Logic Pro and I was curious if there is a way to add a plug-in to just one audio file in a track and not the whole track? Thanks!

Or you can press 'A' on your computer's keyboard and where it says 'Volume', click and hold to bring up the automation options. Choose 'Bypass' for that plug -in slot and add four nodes to the line by clicking on it in four places. You can get the plug in to be bypassed until the appropriate place that way.

Similar Messages

Recording with just one audio file per track

Is there a way, when recording, to just have one continuous track? When recording a 2nd take on the same track (say track 1), instead of having another separate audio file for the 2nd take, I would like to have just one complete audio file instead of bunches of them. I've looked in Preferences and the menu options and have overlooked it if it's there. I hope I am being clear. Thanks.

Hey Terry,
I'm not sure why this is a problem - if you think about it its just like recording multiple takes on tape - you then comp the best bits to create the final 'take'.
Also as AA streams direct to disk at some point (ie when you stop recording) AA has to close the file otherwise it would get corrupted.
I guess it just gets a little getting used to?
If I'm gonna do a complete 2nd (3rd, 4th etc) take then I might drag the previous take down on to a muted track (if I think I might use bits out of it) and then re-take - or just delete the previous take and re-record.
At the end I then select File->Delete Unused Media (I think thats what its called). When all takes and mixing is completed I use this application to identify all the unused files that are not needed and that can be safely deleted - http://www.mediasweeper.com.au

How do I select just one audio channel in Final Cut Pro X?

I know this has been asked and answered somewehre... and I'm pretty sure the answer is simple. But I don't have hour's to search the net.
And the FCPX "Help" feature just ****** me off....
I recorded voice on channel 2 and shotgun nat.sound on channel 1.
I only want the voice track (channel 2) to playback in stereo.
I have already edited the video so I don't want to re-import the raw video to seperate out just the channel 2 voice track.
How do I select just one audio channel in the timeline, then pan it so it plays back in both the L and R channel?
Also, some of the audio was recorded with a air conditioner running in the background. Any suggestions on best audio filers to remove or lessen it?
Thanks, Barry

I think you want to select the clip in the Timeline, choose the Inspector and then Audio, dual mono.
You can even do this by selecting multiple clips.
In the Event Browser as well.

HT1349 Can't sync purchased songs listed as protected aac audio file to Blackberry Link. songs marked just aac audio file. Repurchased one song and worked O.K.. Is there an easier way than having tp re-purchase half of library?

Can,t sync purchased songs marked Protected AAC audio file to Blackberry Link. Songs marked just AAC audio file O.K. Repurchased one song now listed as AAC audio file and now works. Any simpler way to do this with existing protected song other than re-purchase all of them?

wow, very nice review Makes me want to get a vision for myself.
WebKnight wrote:
<SPAN>
Add the ability to randomly select a new background from a pre selected group of photos every time the player is turned on or each day.
I would love that feature. I can't stand useing my computer with a single wall paper anymore (I have 500 anime pics that i rotate between every 2 mins ) If you could make the vision rotate background every x minutes or every time the player is turned on, it would be totally amazeningly sweet!!!! (i might have to go out and buy one then :P)
I just hope that creative has better firmware support with the vision than they have had with the touch.
Once again, great review

AVTransmit, how transmit more than one audio files

Hello. I have download the client server example from your site for transmitting an audio file. The example is in http://java.sun.com/products/java-media/jmf/2.1.1/solutions/AVTransmit2.java
The thing is that i want to change it so as to transmit one audio file after another, something like having a playlist. How can i change the datasource and play the next audio file? I try to change it by adding an endofmedia event but just changing the datasource is not working

I'll post u the jnlp file which i am using. To sign all the jars i've used the same alias ( a self signed certificate using keytool and jarsigner).Here is the jnlp file:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="0.2 1.0"
codebase="http://127.0.0.1:8080/healthdec"
href="testTool.jnlp">
<information>
<title>Unit Test Manager </title>
<vendor>Sun Microsystems, Inc.</vendor>
<description>A minimalist drawing application along the lines of Illustrator</description>
<icon href="images/testing.gif"/>
<offline-allowed/>
</information>
<resources>
<j2se version="1.3+ 1.2+"/>
<jar href="utestfw.jar" main="true" download="eager"/>
<jar href="crimson.jar" main="false" download="eager"/>
<jar href="jaxp.jar" main="false" download="eager"/>
</resources>
<application-desc main-class="utestfw.ObjectBrowser"/>
<security>
<all-permissions/>
</security>
</jnlp>
Can u please look at the above code and suggest me where i am wrong. Thanks.
-Regards
Aparna

I want to transcribe one audio file of a lecture into text. I don't have a need for extended use so can anyone recommend how to do this free? Thanks

I want to transcribe one audio file of a lecture into text. I don't have a need for extended use so can anyone recommend how to do this free? Thanks

Mike,
I was successful, in a test I just conducted, to get Siri to record your problem statement in a Note file on the iPod as I used the Edit > Speech feature in Safari to play the text. I don't see why dictation wouldn't work as well. Why not give it a try?
If you don't have an iOS device to try this with, you could write your audio file to a CD and use an external player to get audio to the Mac.
Jerry

I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, the cut the recording into songs using one audio file folder. When working on an individual song, I can't access the sampler. I get the message "nothing to display"

I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, then cut the recording into songs using one audio file folder ad multiple song files. When working on an individual song, I can't access the sampler. I get the message "nothing to display" or "no region or audio file selected" After much research on the web, I believe this is a permanent bug. Does anyone have a good work-around for this type of work. We record live 16T band rehearsals constantly and would love to be able to break individual songs out of the large file and be able to use the sampler. Thanks in advance for your ideas! Cheers.

Another thing - if I copy one of the tracks to another track, then the sample editor works on the copied track. I don't want to have to copy 16 tracks to new tracks to be able to use the sample editor on a project. Thanks again.

Is there a way to have more than one audio file play in a slideshow?

I know how to add one audio file to play as the pictures go through, but is there a way to get a second audio file to play in the same slideshow??

Make an album in iTunes with the songs you want to play in your slideshow. Then drag the album to the audio well of your iDVD slideshow.

Select just one audio channel to edit??

I feel stupid for asking suck such a (seeminly) simple questions.
I recorded the voice track on channel 2 and the shotgun microphone of "natural sound" on channel 1.
I ONLY want to edit with channel 2 (the voice track). How do I select and edit just one channel (turn off the other channel)?
Also, is there a way to see both waveforms of both audio channels (one turned on and the other turned off?)
Thanks, Barry

Another dumb question... If I select Dual Mono how do I select the appropriate channel I want to use?
Right now I DON'T see any tracks or channels, just the drop down.
I do remember that the top option has a drop down with Stero Left/Right and then a Pan control pops up. Do I select that then pan it to the far left or right? Or is this a different control?
Thanks, Barry

Adding one audio file to multplie movie clips

Hi all
I have two movie clips in my project and I was successful on adding music to one clip. Now how can I make this same audio file last the duration of both movie clips? I want to add the single audio to both. Thanks, web dude

I want to add the single audio to both.
Place another copy at the end of the first.

[solved] installed KDE - just one audio output possible

hey folks,
i just installed KDE and uninstalled my former XFCE and Gnome.
i finished configuring my system and now i can only have one audio output at a time.
i'm using phonon-vlc and alsa. there are known issues or am i doing something wrong...?
edit: looks like phonon is the problem... clementine and firefox the same time are working...
Last edited by arcc (2012-02-28 17:43:45)

i remember having the same issue at one time, but after installing pulse it was ok. i think you have to install alsa-utils as well
although i never used phonon-vlc, try the phonon-mplayer which is much better in my opinion.

Any way to export just an audio file?

Hi All
Is there any way to copy part of a larger audio file, paste it in another track (or open it in the file editor) process it in some way and then export just that file? Been reading manual and books, but this one has me stumped. Only see tracks and busses for export.
Thanks
John

If anyone is interested, and it seems not, a helpful person another list answered my question: copy snippet from one file onto another track; solo new track; select just snippet; save. Finally I can add time-based effects to parts of a larger audio file!

Just one Quark file to convert to InDesign

I have just a single, simple 2 page Quark file I need to convert to InDesign. I don't remember which version of QuarkXpress it was, possible version 6. My old Mac that ran Quark is not working now, so I cannot check. But I have a copy of the file that I need converted to work on InDesign CC. A company called Markzware has a plug-in that can do the job, but paying $200 for it is too steep for just one file.
Is there a cheaper way? I'd be happy to pay, say, $40 to get this file converted. Thanks for any help!

I can open and down save it, then get it into ID for you. I have a few versions of Quark installed.
I have never gone this route and don't know the quality of conversion, however. Don't have markzware's stuff.
Gratis. No charge. Zip. Buy me a coffee sometime if we ever see each other.
Upload it to dropbox.com or your own server and PM me the link. I will be out golfing the remainder of the day and can see how well it goes later this evening.
Mike

Change the volume of one audio file played in icm script

Hello,
Using the play external script element to simply play queue music (recorded as 10 minutes long), is there a way to adjust the volume of the audio being played within the script without having to re-record that specific audio file?
95% of our static audio is recorded fine and plays at the appropriate volume, but we have new queue music coming in all the time (with sales info, annoncements, etc.) that is different in volume from time to time and it would be nice to have an adjustment filter for playing that specific audio file and then adjust back to the default (if needed) afterward.
This would be much easier than asking our vendor to re-record over and over again until tested right.
Anything possible with this? Or would there be something on CVP that could control volume for one specific audio file?
Thanks for any info,
Greg

Even if CVP could control the volume on individual files (It can't, as far as I know), you're better off normalizing the file in Audacity as David mentioned. Having some server modify things on the fly is just wasting resources, why not adjust the file? Audacity is free and open source.
We record our voice prompts using a Unity Connections Voicemail box... Not the cleanest solution, but it works well for us as we have small global contact centers all in different regions, with different voices for each center. I make a habit of running all of my files through Audacity before putting them on media servers - otherwise I would potentially have prompts recorded at different times having different volumes depending on how "the voice" and Unity were doing that day, not to mention all the pops and clicks from using a sub-optimal recording solution. Normalize and the Envelope Tool are my best friends.
-Jameson

Changing a length of more than one audio file in same time

Hi! I'm searching a way to change a length of the several audio files at the same time (this applies to ads that will be broadcast at the radio. The sounds need to have same time accurate to milliseconds). Let's say I've got 20 audio ads, which were originally meant to have 30 seconds, but each of audio file has small differences reaching less than a second. I would like to do a one-off activity, that will change length of each file to equal 30.000 seconds. In a word, is there a way to stretch several audio files, which have different time, to the same length at a same time ?

Thank you for your reply, problem solved with the help of Adobe CC, but it turned out that one of open-source applications also can do it.

Adding a plug-in to just one audio file?

Similar Messages

Maybe you are looking for