Adding a printer into OD domain

Hi
Has anyone got any guidance for me regarding adding printers into the OD domain.
I have looked at the dscl util, but I can't see a way forward.
Thanks in advance
shambeko
OS X Server 10.4.7 Mac OS X (10.4.7)

Hi
I have sorted it....
Thanks for looking.
shambeko

Similar Messages

Printing to a Windows Shared Printer in Windows Domain Stopped Working

If anybody can shed some light on the problem below I would be highly appreciative. I have tried every suggestion I've found on ways to fix this problem, including postings found on this forum, without success.
I use able to Print to a Shared HP Laser Jet printer one a Windows 2003 Server machine, which is part of a Windows 2003 Domain. It has been working faultlessly until about a 2 weeks ago. I have had a number of errors including unable to Connect but the Error I get constantly now is:
+Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY"+
I have reset the password of the windows user that originally made the connection when the computer was set up and this password had special characters. After reading various posts I have tried:
1. Reseting that users password without special characters, deleting the printer and adding it back in using the same user and the new password. The same user can map and connect to windows Shared Directories on the same Server and open and edit files
2. I have reset the Keychain to make sure it was using the new password. Again deleted and re-added the printer.
3. Created a new user both on the domain and one the print server deleted and re-added the printer using each user while also reseting the key chain
4. Tried the Advance option on the Printer Setup Utility using the following SMB URL format,
smb://user:pass@Domain/Machine/Printer where, the domain is called "home", the machine name is "Devserver01" and the printer share name is "HPLaser" resulting in a smb URL of smb://shanep:xxxxx@Home/Devserver01/hplaser.
None of the above work!
So as a new MAC user I have absolutely no other ideas of where to look for additional information on what is happening i.e. where do you look for log files that may contain additional detail.
Can anybody assist on suggesting any other things to look for or check?
Thanks
Shane

Hi Greg,
Thanks of the tips. I have just managed to get it working and I didn't use the LPD method but tried a few different smb URI's.
Here's what I found worked.
1. I created a standard user account on the Windows 2003 server on which the printer is connected and shared, i.e. a non Domain user name that is local to the server only and not the domain
2. I then used this user name and password, along with the IP address of the server in the URL i.e.
smb://user:password@IPofserver/hplaser.
3. Printed a test page successfully
I then tried variations of a theme using username and passwords on the domain, changing the @workgroup/server/printer with no success.
I could however replace the IP address with simply the @Server/Printer combinations using he local user name and password successfully.
I also installed apple and Unix printing and file services so whether this made the difference I'm not sure.
Interestingly I tried to add the mac to the LDAP/Active Directory and couldn't successfully bind to the directory. Not that I'm an AD expert, but I have configured a few Java applications to use LDAP/AD authentications and groups of late so this problem is a little unusual, but that aside, thanks for the pointers, Printing problem solved. now to solve the AD one
Shane

When will there be fix for AirPrint in Yosemite? I cannot use my HP printer. I have uninstalled/resinstalled everything you can think of. I have deleted and added my printer more time than I can count. I have checked for updates. Nothing has worked.

When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
MacBook Air (mid 2012), OS 10.10, HP Officejet 7500a

This is what appeared on Console:
11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
timestamp: 12:42:32.557 Wednesday 12 November 2014
process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
#exceptions
11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
Not sure what any of this means.

Adding LPD printer OSX10.6.2 to Airport Extreme + ethernet hub

I have a GCC Elite XL 20/600 connected by ethernet to a hub which is connected to my Airport Extreme. This setup was working fine with OSX10.4.11 using AppleTalk, Local Zone with a PPD proviced by GCC.
Now that AppleTalk is gone, I'm supposed to set it up as an LPD Generic Postscript printer using an address 10.10.1.100
I tried that and it says the address is valid. I go to print and it can't connect, just sits there saying it's trying to connect.
I tried looking for all my network addresses, and have tried probably 20 or so addresses, based on using the first three numbers of an existing address and changing the last one. Nothing works.
Any ideas?
Thanks,
Aaron

Also, it doesn't just hang there, it eventually says:
"Unable to connect to printer; will retry in 30 seconds..."
To clarify the setup:
Printer plugged into ethernet on back of Airport. Airport connected to internet by ethernet. Another printer connected to Airport via USB Bonjour.
The Bonjour printer works fine. Internet works fine. It's just this ethernet printer that is not recognized.
I tried adding it as an IPP printer, with same results. I turned on TCP/IP on the printer and set its IP address. Then went and added it as IPP with the IP address I just assigned. The address was recognized as valid, it added the printer as Generic PostScript Printer, then I tried to print and it couldn't find it, same as before.
?

Help Adding a Printer!

I got an HP deskjet 3054 printer as part of Apple's program and I set it all up, but I cannot add it.
I go into print and scan within system preferences, press add a printer, click on my printer, and we're all good. But then a pop up comes up saying Apple must look for a software update for the printer to be used. It looks for an update, finds it, downloads it, then installs it, and an error comes up saying my software is not available at the time.
I've tried installing the software from HP (for OSX Lion) multiple times and from Apple too. But every time the same process happens that I have described before. I add the printer via USB. My friend has the same macbook pro and can add the printer fine so I know it's the computers fault.
If anyone can help me that'd be totally awesome. Thanks

I've done that too before like I already said.
I finished installation of the drivers. As you can see.
I follow the instructions and try to add the printer
And instead of adding the printer it does this. Even though I just installed the software
And installs again?

Adding new printer with ARD 2.2

I just installed a new printer in a lab of 27 eMacs (an hp 1200). I set up the printer on one of the eMacs and now would like to use ARD 2.2 to install the printer on the other computers. Where is the information about installed printers stored in 10.4? I copied the /users/username/library/printer folder from the eMac with the new printer setup to one of the other eMacs but it didn't copy the new printer into that folder. Is there a better way to do this? I thought that there would be a folder or file that stores this info. that I could easily copy to the other eMacs. Any help is appreciated!
Thanks!

Hi there,
Printer information is stored in /etc/cups. Here you will have several files containing printer information, such as cupsd.conf and printers.conf. There is also the ppd folder that contains the ppds for the printer/s that have been added.
I haven't tried this but I think if you copy the two files and folder mentioned above and the file/s from the ~/library/Printers folder, then this may be sufficient.
Of course the printer would have to be a network printer. If it is physically connected to the eMac then this won't be suitable. Sorry if this is obvious but you didn't mention how the printer was configured so I couldn't assume you were aware of this.
Regards,
Paul

Adding portal to an existing domain

Hi I have a JSP/Servlet web applicatin and
I want to make it a portal application.
I was following Weblogic Portal Development
Guide 7.0. I found the section
"Adding portal to an existing domain" is very incomplete
or confusing and I cannot do it. Is there any better document
for this?

Judging from the dates between these two entrries and no answers, I'd
guess that there isn't anyone from BEA monitoring this group? I am in a
similar situation. What I want to understand is how one can "portalize" an
existing web app. I understand there are implications to some of the
presentation, but specifically, I want to deploy a Servlet based app that
uses EJBs and deploy this as an EAR in the same domain as the portal
(perhaps under the /applications directory). I can make everything work
except the webflow where I reference the Servlet.
Specifically, I have a presentation page that is defined to be my servlet.
When I try to build a webflow URL referencing this event, I get errors from
the portal because it presumes it may be located somewhere else or in a
different namespace. It leads me to believe that I can't reference a
servlet unless it is under the /framework or /portal directories under the
portal web-app directory. I'm convinced there must be a way to reference
other web components that aren't specifically part of the portal web app,
but can't figure out how to propagate the webflow element to the actual
servlet I want.
Any ideas from the community at large? This must be something other
people have wrestled with since I can't imagine that only new apps will be
put into portals.
Thanks,
Mark
"Sara" <[email protected]> wrote in message
news:[email protected]...
>
I'm facing similar problems too. I have an ear file in an existing domainthat
I want to use to create a portal. The documentation on this is quiteconfusing
and the steps require so many manual steps that it is bound to beerror-prone.
What's BEA's recommended way to expose an existing Weblogic application asa portal
Thanks in advance
-Sara
"David Zhang" <[email protected]> wrote:
Hi I have a JSP/Servlet web applicatin and
I want to make it a portal application.
I was following Weblogic Portal Development
Guide 7.0. I found the section
"Adding portal to an existing domain" is very incomplete
or confusing and I cannot do it. Is there any better document
for this?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

Cant get data from text file to print into Jtable

Instead of doing JDBC i am using text file as database. I cant get data from text file to print into JTable when i click find button. Goal is to find a record and print that record only, but for now i am trying to print all the records. Once i get that i will change my code to search desired record and print it. when i click the find button nothing happens. Can you please take a look at my code, dbTest() method. thanks.
void dbTest() {
DataInputStream dis = null;
String dbRecord = null;
String hold;
try {
File f = new File("customer.txt");
FileInputStream fis = new FileInputStream(f);
BufferedInputStream bis = new BufferedInputStream(fis);
dis = new DataInputStream(bis);
Vector dataVector = new Vector();
Vector headVector = new Vector(2);
Vector row = new Vector();
// read the record of the text database
while ( (dbRecord = dis.readLine()) != null) {
StringTokenizer st = new StringTokenizer(dbRecord, ",");
while (st.hasMoreTokens()) {
row.addElement(st.nextToken());
System.out.println("Inside nested loop: " + row);
System.out.println("inside loop: " + row);
dataVector.addElement(row);
System.out.println("outside loop: " + row);
headVector.addElement("Title");
headVector.addElement("Type");
dataTable = new JTable(dataVector, headVector);
dataTableScrollPane.setViewportView(dataTable);
} catch (IOException e) {
// catch io errors from FileInputStream or readLine()
System.out.println("Uh oh, got an IOException error!" + e.getMessage());
} finally {
// if the file opened okay, make sure we close it
if (dis != null) {
try {
dis.close();
} catch (IOException ioe) {
} // end if
} // end finally
} // end dbTest

Here's a thread that loads a text file into a JTable:
http://forum.java.sun.com/thread.jsp?forum=57&thread=315172
And my reply in this thread shows how you can use a text file as a simple database:
http://forum.java.sun.com/thread.jsp?forum=31&thread=342380

How do I make my HP P2055dn printer into a wireless network printer for 5 computers

How do I make my HP P2055dn printer into a wireless network printer for 5 computers? Windows versions on computers used are XP,Vista & 7.
Thanks
Leon

Unplug the USB cable from the printer. Plug your printer into your wireless router with an Ethernet cable.
Next, on each computer, get the latest software for your printer from the "Support & Drivers" link at the top of this page. Install it and select "Network" installation when it asks.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to add a new printer into printer list?

Dear all,
May I know how to add new printer into my printer list in SAP system? My company SAP is SAP 4.0B. Can any one please teach me how to add printer step-by-step?
Thanks alot!!
PC

Solved

Plugged 110V 2320 Printer into 220V. Wont turn on now. Help!

Plugged 110V 2320 Printer into 220V. Wont turn on now. What do you think needs to be checked/replaced?

Your printer needs to be serviced to replace power supplies.
I work for HP

Does Apple plan on adding a print to PDF funcationlity to iOS?

Hello,
I used Apps like Save2PDF for printing Webpages to PDF via airprint. But since iOS 5 it's impossible to print from safari via airprint to pdf.
I contacted the Save2PDF Support for getting an answer of my question "Why i can't print to pdf?"
This was the reply from Eurosmartz:
"Apple's latest release of iOS 5 has changed the way apps are able to interact with the device. This now means that the one of the printing features in this app for printing from other apps via the AirPrint method is no longer available. Apple's changes for iOS have removed this functionality for all apps - not just ours[...]"
Does Apple plan to fix this?
Does Apple plan on adding a print to PDF funcationlity to iOS?
Best Regards
Volker

Thx for your reply,
is there an another way to print webpages to pdf without internet connection?
Best Regards
Volker

Need helpcreating a script to read the name of a folder and adding that name into the permissions of that folder

Need help creating a script to read the name of a folder (which is the AD Username) and adding that name into the permissions of that folder.
I have over 100 folders which I need to add the AD user to read and write to their own folder
Hope you guys understand what I mean

Just to add, Mac in intergrated into AD and all I need is help in creating the script
Thanks

How To use window.print() into Button Attributes

hi,
I want to print a report using an print button.so i am using window.print() function into Button Attributes .But Print pop up screen not pop up . How To use window.print() into Button Attributes .
Thanks
Manoj

dear hari
"Set button target as URL and put following js as URL Target
javascript:window.print();"
Will this be useful to my another thread raised as follows.
In case, if i am able to generate report as txt (ascii) file instead of doc / pdf and is it possible to send the txt file using host command. I am uable to try since i do not know where to place host command on click &print.
yours
dr.s.raghunathan

Adding a printer into OD domain

Similar Messages

Maybe you are looking for