Adding a rectangle & a followup question regarding layering

I want to simply draw a rectangle on a a location on photograph or file and just see the outline of the rectangle in a color of my choice...I dont want the rectangle filled in with the color...just the outline. I would like to have all sides of the rectangle the same width ....it would be nice to be able to determine that width if possible. What I am trying to do is to create rectangular locations on a photograph and then add text to that identified area...
In a follow up question it appears that each time I add text from one location on the photo and go to another area to add text...a new layer appears. It would be nice to be able to add various rectangles and areas of text without having a new layer appear for each entry...is that possible?

Use the Rectangular Marquee tool to define the rectangle. Then use the Stroke command to draw the line around it.
You can flatten the image or merge layers, but there is no way that you can stop them being created when you create shapes or text. I don't think that being able to do so would be useful for many people.

Similar Messages

  • Question regarding the pen tool (w/ picture inside)

    Hello everyone! I have a question regarding the pen tool. I think this picture is very helpful for my question:
    So in this pic is an orange rectangle and within that rectangle is a blue stripe. I would like the blue stripe to be perfectly flush (not over, and not under) the edge of the rectangle. For example, on the bottom end of the blue stripe, you can clearly see that the stripe does not extend far enough to the edge of the orange rectangle. At the top of the stripe, it goes a little bit over (a bit hard to see). I work with some complex shapes when using the pen tool and it is really slowing me down to compensate for over/under shapes. If it could just snap to the borders of other shapes it would make my life a lot easier. Thanks for reading and please help!

    A couple of thoughts come to mind:
    1.  You could create the shape "face on", using guides, and the points will snap to guides with snap enabled.  Then you could transform the whole thing together by selecting all the shape layers.
    2.  Holding down the shift key while dragging a point seems to cause it to snap to some things under some conditions. However, on having just tried to recreate what you're showing I didn't see the proper snap happening sometimes.
    3.  There's the full manual approach, of course where you zoom into thousands of percent and move the points by hand manually.  I assume this is what you're trying to avoid.
    -Noel

  • Questions regarding customisation/configuration of PS CS4

    Hello
    I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
    Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
    Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
    Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
    Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
    Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
    Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
    These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
    I hope someone can provide some nice solutions

    NyanPrime wrote:
    <answered above>
    Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
    Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
    Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
    Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
    Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
    These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
    I hope someone can provide some nice solutions
    2.  No.  It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5.  It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
    3.  Not sure, since I haven't tried it.  However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
    4.  What buttons are you talking about?  Those you are creating in your document?  If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
    5.  There are many, many options for positioning and sizing panels.  Most start with making a panel visible, then dragging it somewhere by its little tab.  One of the important features is that you can save your preferred layout as a named workspace.  Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created).  The name of that menu is a little confusing.  Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
    You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
    As an example, I use two monitors, and this is my preferred layout:
    6.  No, it's not possible to affect the layer names Photoshop generates, as far as I know.  I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
    Hope this helps!
    -Noel

  • I have a question regarding emails being marked as unread when syncing with an exchange account.

    I have a question regarding emails being marked as unread when syncing with an exchange account.
    In the evening I can see I have 10 unread emails on my exchange account. I leave them unread. The following day, at work, I view and read all my mails from today and yesterday, so that I have NO unread messages. When I then sync my iphone it marks only the mails from today as read but, leaves all the mails from yesterday marked unread. Only solution so far is for me to go through the mails on my iphone one at a time for them to be marked as read.
    My mail account is set to sync 1 month back.
    I have had this problem on all the iphones I have had.
    I currently have an iPhone 5 and my software is up to date.
    What am I doing wrong?

    Hey kabsl,
    Thanks for the post.
    What type of email account is attached to your BlackBerry Z10? (POP3, IMAP, Exchange).  Also have you tried removing and re-adding the email account to test?
    Is this email account only setup on one computer or several computer?
    I look forward to your reply.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • A question regarding deallocating arrays

    hello. just to check if i learned arrays correct..
    for example i have an array 'anArray[ ]'
    public String[ ] anArray;
    -> to deallocate anArray, i simply used:
    anArray = null; instead of performing a for loop maybe..
    is this correct?
    it's quite confusing. does it apply to multidimensional arrays? for example anArray[ ] [ ] = null???

    A question regarding eclipse.
    No offence meant.People are not usually offended by Eclipse.
    I have added a jar file to the current project in its
    build path.
    This executes the concerned class file which is in
    the jar file.
    If I remove the jar file from the build path and run
    the project,
    it still executes that class file.
    I tried building a clean project and running it,but
    still executes the jar file and the class.
    Any idea why this is happening?You have that class file elsewhere
    or you have confused your problem statement.
    Why don't you create a new project and add everything except that class/jar (whichever yu mean)

  • A question regarding Java project in ECLIPSE IDE

    A question regarding eclipse.
    No offence meant.
    I have added a jar file to the current project in its build path.
    This executes the concerned class file which is in the jar file.
    If I remove the jar file from the build path and run the project,
    it still executes that class file.
    I tried building a clean project and running it,but still executes the jar file and the class.
    Any idea why this is happening?

    A question regarding eclipse.
    No offence meant.People are not usually offended by Eclipse.
    I have added a jar file to the current project in its
    build path.
    This executes the concerned class file which is in
    the jar file.
    If I remove the jar file from the build path and run
    the project,
    it still executes that class file.
    I tried building a clean project and running it,but
    still executes the jar file and the class.
    Any idea why this is happening?You have that class file elsewhere
    or you have confused your problem statement.
    Why don't you create a new project and add everything except that class/jar (whichever yu mean)

  • Question regarding DocumentDB RU consumption when inserting documents & write performance

    Hi guys,
    I do have some questions regarding the DocumentDB Public Preview capacity and performance quotas:
    My use case is the following:
    I need to store about 200.000.000 documents per day with a maximum of about 5000 inserts per second. Each document has a size of about 200 Byte.
    According to to the documentation (http://azure.microsoft.com/en-us/documentation/articles/documentdb-manage/) i understand that i should be able to store about 500 documents per second with single inserts and about 1000 per second with a batch insert using
    a stored procedure. This would result in the need of at least 5 CUs just to handle the inserts.
    Since one CU consists of 2000 RUs i would expect the RU usage to be about 4 RUs per single document insert or 100 RUs for a single SP execution with 50 documents.
    When i look at the actual RU consumption i get values i don’t really understand:
    Batch insert of 50 documents: about 770 RUs
    Single insert: about 17 RUs
    Example document:
    {"id":"5ac00fa102634297ac7ae897207980ce","Type":0,"h":"13F40E809EF7E64A8B7A164E67657C1940464723","aid":4655,"pid":203506,"sf":202641580,"sfx":5662192,"t":"2014-10-22T02:10:34+02:00","qg":3}
    The consistency level is set to “Session”.
    I am using the SP from the example c# project for batch inserts and the following code snippet for single inserts:
    await client.CreateDocumentAsync(documentCollection.DocumentsLink, record);
    Is there any flaw in my assumption (ok…obviously) regarding the throughput calculation or could you give me some advice how to achieve the throughput stated in the documentation?
    With the current performance i would need to buy at least 40 CUs which wouldn’t be an option at all.
    I have another question regarding document retention:
    Since i would need to store a lot of data per day i also would need to delete as much data per day as i insert:
    The data is valid for at least 7 days (it actually should be 30 days, depending on my options with documentdb). 
    I guess there is nothing like a retention policy for documents (this document is valid for X day and will automatically be deleted after that period)?
    Since i guess deleting data on a single document basis is no option at all i would like to create a document collection per day and delete the collection after a specified retention period.
    Those historic collections would never change but would only receive queries. The only problem i see with creating collections per day is the missing throughput:
    As i understand the throughput is split equally according to the number of available collections which would result in “missing” throughput on the actual hot collection (hot meaning, the only collection i would actually insert documents).
    Is there any (better) way to handle this use case than buy enough CUs so that the actual hot collection would get the needed throughput?
    Example: 
    1 CU -> 2000 RUs
    7 collections -> 2000 / 7 = 286 RUs per collection (per CU)
    Needed throughput for hot collection (values from documentation): 20.000
    => 70 CUs (20.000 / 286)
    vs. 10 CUs when using one collection and batch inserts or 20 CUs when using one collection and single inserts.
    I know that DocumentDB is currently in preview and that it is not possible to handle this use case as is because of the limit of 10 GB per collection at the moment. I am just trying to do a POC to switch to DocumentDB when it is publicly available. 
    Could you give me any advice if this kind of use case can be handled or should be handled with documentdb? I currently use Table Storage for this case (currently with a maximum of about 2500 inserts per second) but would like to switch to documentdb since i
    had to optimize for writes per second with table storage and do have horrible query execution times with table storage because of full table scans.
    Once again my desired setup:
    200.000.000 inserts per day / Maximum of 5000 writes per second
    Collection 1.2 -> Hot Collection: All writes (max 5000 p/s) will go to this collection. Will also be queried.
    Collection 2.2 -> Historic data, will only be queried; no inserts
    Collection 3.2 -> Historic data, will only be queried; no inserts
    Collection 4.2 -> Historic data, will only be queried; no inserts
    Collection 5.2 -> Historic data, will only be queried; no inserts
    Collection 6.2 -> Historic data, will only be queried; no inserts
    Collection 7.2 -> Historic data, will only be queried; no inserts
    Collection 1.1 -> Old, so delete whole collection
    As a matter of fact the perfect setup would be to have only one (huge) collection with an automatic document retention…but i guess this won’t be an option at all?
    I hope you understand my problem and give me some advice if this is at all possible or will be possible in the future with documentdb.
    Best regards and thanks for your help

    Hi Aravind,
    first of all thanks for your reply regarding my questions.
    I sent you a mail a few days ago but since i did not receive a response i am not sure it got through.
    My main question regarding the actual usage of RUs when inserting documents is still my main concern since i can not insert nearly
    as many documents as expected per second and CU.
    According to to the documentation (http://azure.microsoft.com/en-us/documentation/articles/documentdb-manage/)
    i understand that i should be able to store about 500 documents per second with single inserts and about 1000 per second with a batch insert using a stored procedure (20 batches per second containing 50 documents each). 
    As described in my post the actual usage is multiple (actually 6-7) times higher than expected…even when running the C# examples
    provided at:
    https://code.msdn.microsoft.com/windowsazure/Azure-DocumentDB-NET-Code-6b3da8af/view/SourceCode
    I tried all ideas Steve posted (manual indexing & lazy indexing mode) but was not able to enhance RU consumption to a point
    that 500 inserts per second where nearly possible.
    Here again my findings regarding RU consumption for batch inserts:
    Automatic indexing on: 777
    RUs for 50 documents
    Automatic indexing off &
    mandatory path only: 655
    RUs for 50 documents
    Automatic indexing off & IndexingMode Lazy & mandatory path only:  645 RUs for
    50 documents
    Expected result: approximately 100
    RUs (2000 RUs => 20x Batch insert of 50 => 100 RUs per batch)
    Since DocumentDB is still Preview i understand that it is not yet capable to handle my use case regarding throughput, collection
    size, amount of collections and possible CUs and i am fine with that. 
    If i am able to (at least nearly) reach the stated performance of 500 inserts per second per CU i am totally fine for now. If not
    i have to move on and look for other options…which would also be “fine”. ;-)
    Is there actually any working example code that actually manages to do 500 single inserts per second with one CUs 2000 RUs or is
    this a totally theoretical value? Or is it just because of being Preview and the stated values are planned to work.
    Regarding your feedback:
    ...another thing to consider
    is if you can amortize the request rate over the average of 200 M requests/day = 2000 requests/second, then you'll need to provision 16 capacity units instead of 40 capacity units. You can do this by catching "RequestRateTooLargeExceptions" and retrying
    after the server specified retry interval…
    Sadly this is not possible for me because i have to query the data in near real time for my use case…so queuing is not
    an option.
    We don't support a way to distribute throughput differently across hot and cold
    collections. We are evaluating a few solutions to enable this scenario, so please do propose as a feature at http://feedback.azure.com/forums/263030-documentdb as this helps us prioritize
    feature work. Currently, the best way to achieve this is to create multiple collections for hot data, and shard across them, so that you get more proportionate throughput allocated to it. 
    I guess i could circumvent this by not clustering in “hot" and “cold" collections but “hot" and “cold"
    databases with one or multiple collections (if 10GB will remain the limit per collection) each if there was a way to (automatically?) scale the CUs via an API. Otherwise i would have to manually scale down the DBs holding historic data. I
    also added a feature requests as proposed by you.
    Sorry for the long post but i am planning the future architecture for one of our core systems and want to be sure if i am on
    the right track. 
    So if you would be able to answer just one question this would be:
    How to achieve the stated throughput of 500 single inserts per second with one CUs 2000 RUs in reality? ;-)
    Best regards and thanks again

  • How would I go about adding multiple rectangles using the same lines of code?

    How would I go about adding multiple rectangles using the same lines of code? I would prefer to just run through a set of code every time I need a polygon. If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.

    >>How would I go about adding multiple rectangles using the same lines of code?
    You could create a method that creates and returns x number of Rectangle elements:
    public IEnumerable<Rectangle> CreateRectangles(int numberOfRectsToCreate)
    for (int i = 0; i < numberOfRectsToCreate; ++i)
    Rectangle rect = new Rectangle();
    rect.Fill = Brushes.Blue;
    rect.Width = 100;
    rect.Height = 100;
    yield return rect;
    ..and then call this method from anywhere in your code:
    IEnumerable<Rectangle> rects = CreateRectangles(5);
    foreach (Rectangle rect in rects)
    //add to StackPanel or do whatever with the Rectangle elements:
    yourStackPanel.Children.Add(rect);
    >>If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.
    When adding Point objects to a Polygon you can only add one per call to the Add method but you could call the Add method inside a loop, e.g:
    for(int i = 0; i < 10; ++i)
    //add to StackPanel or do whatever with the Rectangle elements:
    Polygon p = new Polygon();
    p.Points.Add(new Point());
    Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't post several questions in the same thread.

  • Noob Question - PreComp Layers and Effects

    I have precomposed a layer and am wondering why when I apply an effect inside the precomposed layer, it cannot be seen in the main timeline... for instance, I've created a logo on a billboard and precomposed the layer. I added it to the timeline and all is fine. Now, I tried to apply a 'vector paint' effect to a layer inside the precomp. It looks fine in the precomp, but it disappears in the main timeline. Also, I added trapcode particles inside the precomp. They do not show up in the main timeline either. Any advice would be much appreciated. Thanks to all.

    I see them in the precomp but not in the main time.
    Date: Mon, 29 Jun 2009 16:11:50 -0600
    From: [email protected]
    To: [email protected]
    Subject: Noob Question - PreComp Layers and Effects
    Do you see them when you clic on the "continuosly rasterize" button of your precom. it's the little "*" icon of your precomposition.
    >

  • Question regarding pse 8

    When I have multiple pictures up, how do I keep two pictures from merging when I move one of the pictures to the side?  I would like to turn this feature off.
    Thanks.

    I opened 4 photos into Adobe Photoshop Elements 8 and have set the pictures to "float in all windows" so I can easily grab any one of them and move them to compare pictures.What happens is that the picture I am moving fades and suddenly I have two pictures, one on top of the other in one frame.  In the bar at the top of the "merged" picture, it shows the file names of two pictures.  From that top bar, I can undo the "merge" by grabbing one of the pictures and dragging it to the left or right, and I am back to the two original pictures.  I would like to be able to move pictures around without two frames becoming one frame with two pictures layered.  Hope that is a better explanation. Thanks. DianeDate: Mon, 29 Oct 2012 12:47:56 -0600
    From: [email protected]
    To: [email protected]
    Subject: Question regarding pse 8
        Re: Question regarding pse 8
        created by hatstead in Photoshop Elements - View the full discussion
    I don't understand. Multiple pictures up - what does that mean?2 pictures merging when you move one to the side - how do you make them merge and move to the side?Feature off - when does this feature come on?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4808688#4808688
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4808688#4808688
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4808688#4808688. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Questions regarding chapter markers

    I've got a few questions regarding working with chapter markers. First a little background info. I'm working in CS 5.5. I used Dynamic Link to send a Premiere sequence to Encore. In Premiere, I've got another sequence that is an exact duplicate of the original, with just a little text added.
    I decided that I need to go back and add chapter markers, so I went through the initial Premiere sequence and added all the Encore Chapter Markers. I'd like all the chapter markers to be consistent in all three locations without having to re-do it manually each time.
    Is there any way to bring those markers into Encore withour re-importing the sequence? I kind of figured that was the point of using Dynamic Link, but the markers aren't showing up in Encore.
    And then, is there a way to copy those markers within Premiere from one sequence to the other?
    Thanks in advance for any help.

    (Dear mods: a little overzealous with the thread moving. This had enough to do with Premiere Pro that it could have remained there... and saved me from retyping my reply.)
    Is there any way to bring those markers into Encore withour re-importing the sequence?
    This part is Encore. In the Encore Timeline containing the PPro sequence you're using with DL, select the sequence/asset, and go to Edit > Update Markers From Source. A warning dialog will pop up about replacing the markers; when you OK it, the markers positions and names will be updated.
    And then, is there a way to copy those markers within Premiere from one sequence to the other?
    It's not possible to copy and paste markers, but here's a workaround of sorts (assuming your sequences are the same duration and you want the markers at the same times):
    Drag the sequence that contains the chapter markers into the sequence that doesn't; because the Encore chapter markers are sequence markers, they'll turn into clip markers when you nest the sequence. Select this nested sequence, and then use the Next (or Previous) Clip Marker (found under Marker > Go to Clip Marker, or with keyboard shortcuts) to jump to each clip marker. When you land on one, add a chapter marker to the sequence; if you don't already, set up a keyboard shortcut for this and it will make adding the markers a breeze. Now, you'll have to add names, if you want them, but at least this will make matching the time much easier.

  • Question Regarding MIDI and Sample Accuracy

    Hi,
    I have 2 questions regarding MIDI.
    1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
    2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
    I've looked through the manual, and couldn't find any specific answer to these questions.
    Thanks!
    Message was edited by: Matthew Usnick

    Ok, I've done some experimenting, and here are my results.
    I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
    Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
    I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
    SO.
    Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
    This is very good news, and glad I worked this out!
    (if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
    Message was edited by: Matthew Usnick

  • Question regarding homehub and Open reach router -...

    Hi all,
      I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
      I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
      Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
    Thanks, .

    Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white).  The HomeHub has its own power switch, the modem doesn't.
    There is something wrong if the HomeHub needs to be turned on before the modem.  As others have said, in general best to leave the modem on all the time.  You should be able to connect them up in any order, or together.  (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
    Check if the router can connect/disconnect from the broadband using the web interface.  Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

  • Question regarding IWDTree and context Value Node naming

    Hi,
    I have a question regarding the IWDTree / IWDTreeNodeType components.
    I have a context looking like this:
    Context
      + ResponseNode
        + PersonNode (1..1)
          + PersonAddressNode                    (empty node, placeholder)
          | + AdresNode (0..n)
          + PersonChildNode                      (empty node, placeholder)
          | + PersonNode (0..n)
          |   + PersonAddressNode                (empty node, placeholder)
          |     + AddressNode (0..n)
          + PersonParentsNode                    (empty node, placeholder)
            + PersonNode (0..n)
              + PersonAddressNode                (empty node, placeholder)
                + AddressNode (0..n)
    The context represents a person, a person's address, and a person's children and parents with their respective addresses.
    As a result, on different branches, a PersonNode and AddressNode can appear.
    And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
    Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?

    Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
    The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
    Can you give an example how your tree should look like at runtime?

  • Question regarding roaming and data usage

    I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
    I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
    If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

    Ann154 wrote:
    If you are getting charged to use the wifi, then it is possible.  Otherwise no
    Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free .   Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones)  So these charges, if any, will not show up on the verizon bill app.  Having it in airplane mode prevents all cellular data traffic so you should be fine

Maybe you are looking for