ADDING A SATA III SSD AT 6GBS TO MY DESKTOP COMPUTER

I have an HP Pavilion Elite built in May 2008 model number KQ497AA - ABAm9340f with a
Manufacturer's motherboard: Asus IPIBL-LB
Will this motherboard accept SATA III because I'm planning to add a Crucial 240gb SSD rated at 6gbs,  My current HDD is 750 gb running at SATA II, 3 gbs.
This question was solved.
View Solution.

Terlat1234, welcome to the forum.
Yes, it appears that the drive will work in your computer.  Here is the recommended components on the Crucial Memory website using their Crucial Advisor tool.  One of their featured upgrades is a MX100 - 512 GB - SSD that is SATA III.  Since these drives are 2.5", it will be necessary to buy an adapter for it to fit into a 35" drive bay.
If you want more information you could contact their Customer Support.  They have always been very helpful when I contacted them.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • Is a Macbook Pro early 2011 2 GHz Intel Core i7 compatible with a SATA III SSD

    Is a Macbook Pro early 2011 2 GHz Intel Core i7 compatible with a SATA III SSD Drive

    lwrosenbaum wrote:
    Is a Macbook Pro early 2011 2 GHz Intel Core i7 compatible with a SATA III SSD Drive
    One thing to keep in mind is that while you'll be amazed at the increase in performance an SSD can deliver over a HD, the two storage mediums work differently, and one of the OS features SSD's benefit from is TRIM. While you've probably seen a lot of discussion and disagreement about that on these forums, this article about the Samsung 840 EVO SSD also goes into how SSD performance changes over time for a variety of SSD's. The narrative is interesting but the graphs are an eye-opener, showing how relatively successful Garbage Collection alone vs GC + TRIM are in recovering full performance. That's the good news.
    The bad news is that while activating TRIM is simple, activating it with Yosemite installed has a real down-side. So if you haven't upgraded to Yosemite yet, you might keep that in mind.

  • 6560b notebook - no sata-III ssd drives detected - hardware problem - HP employee needed

    hello,
    I'm one of the authors of this thread about the problem statet in the title.
    As the current forum thread might be slightly misplaced under 'Notebooks>Updates', I opened this thread here to get contact to one of the experts from HP.
    We need technical support. We have tried every possible solution to fix this problem.
    As several owners of the 6560b have experienced, sata-III SSD drives don't work in any of the two internal drive slots of the 6560b.
    Most recent firmware updates on ssd / notebook are installed. The SSD drives work fine in other computers. The problem is reproducable. The drives are not correctly recognized on BIOS level at boot.
    There is no known 6560b notebook running an internal sata-III drive.
    Some of the drives that are reproducably failed to be recognized:
    Kingston HyperX 120GB - Sata-III
    Corsair Force3 120GB - Sata-III  
    Corsair Force GT 120GB - Sata-III
    Intel 510 - Sata-III
    OCZ Vertex 3 - Sata-III
    OCZ Agility 3 - Sata-III
    Sata-III drives appear to work and are bootable* via the external esata connection.
    (verified by one user)
    This, however, is no usuable workaround.
    A short summary of the impact of this bug:
    -it appears to affect every notebook
    -the problem is not limited to SSDs with sandforce chips, one manufacturer, one drive size or one bios version of the 6560b.
    Just to repeat this: the chipset as well as the sata-chipset are from Intel. Yet modern Intel drives (510 series) fail to be recognized. Therefore, this problem cannot be 'simple' chipset incompatibilties either, as Intel would not ship SSDs that have incompatibilities with their <6mo. old chipsets.
    The problem does not directly relate to the hardware failures of sata-II ports known as 'intel-sata-bug' as the affected models include newer mainboards of revised steppings.

    I have the same problem on my 6560b notebook. A brand new Kingston HyperX 240GB - Sata-III is unable to boot. Drive is not seen/detected at boot time by BIOS. BIOS is latest available (F.50). Chipset is Sandy Bridge HM65.
    UEFI has been enable. I have to degrade manually, in BIOS settings, SATA3 (6Gbps) to SATA2 (3Gbps) for the drive to be usable. But perfs are not here for that kind of drive, so I'm very upset about that.
    Any BIOS fix appreciated.

  • Intel 520 SATA III SSD causes atapi errors, but stock Hatachi SATA II does not

    W520 Received March 2012. Took out stock Hatachi HTS72322A7A365 500GB SATA II drive and replaced with Intel 520-Series 240 GB SATA III SSD also put a second identical SSD in drive bay. All went well until a few days ago, now getting scores of Atapi - Event ID:11 - The driver detected a controller error on \Device\Ide\IdePort0.  Either of these two SSDs bring up this error on channel 0 (underneath laptop).  NEITHER (NONE) SSD brings up the error in the drive bay.
    Put the Hatachi back and no error.  What happened over the last few days?  Hatachi SATA II no error; is there a W520 hardware problem with very high speed SATA III SSDs?  Why the degrade all of a sudden?  Bad chip set? BIOS was upgraded to latest, but still errors. Don't think there were any WIN-7 / 64 updates. 
    Call Lenovo to replace laptop?  But NO errors with the stock / supplied SATA II Hatachi, just the SATA III SSD on channel 0, but not channel 1, so do I have a claim?  Any ideas?  I'd buy the wimpy Lenovo 160GB SSD (it's approved) for channel 0, but it's SATA II not III.  SSD or W520?
    W520 4282W59 WIN-7-64 i7-2760QM @ 2.40GHz 2401 Mhz, 16GB Memory, NVIDIA Quadro 1000M

    I did a hard drive copy from the Intel 520 SSD in chanel 0 (underside laptop) to a new Samsung 830 256GB SSD in channel 1 (Ultra Bay).  Remember I get the atapi errors on channel 0 with the Intel 520 SSD in chanel 0.  The copy took longer that I thought it would.  Then I put the Samsung in chanel 0 and the Intel in chanel 1 UltraBay.  Reboot.  No atapi errors!  The Samsung DOES NEED "enable write caching and turn off buffer flushing" or it performs badly compared to an Intel 520 SSD.  The Samsung (using ATTO and AS SSD) comes in at 475-495 MB/s with "enable write caching and turn off buffer flushing".  It performs half that if "enable write caching and turn off buffer flushing" is not checked.  The Intel SSD performs at 485-505 MB/s no matter if "enable write caching and turn off buffer flushing" is checked or not.  These are general observations and are dependant on transfer size, queue depth and so forth, but this observation is repeatable.
    So, all things being equal, one might conclude that the Intel 520 SSD is not compatible with the W520.  NO.  NOT.  I put that Intel 520 SSD back into chanel 0 and booted up.  Again see atapi errors.  Next I did a complete software update from lenovo.  Checked and installed all updates, recommended, critical, so forth.  Ended up with all that bloatware.  Big battery and Wi-Fi icons on notification area task bar...  Ran the ATTO and the AS SSD in parallel.  No atapi errors.  Disk rates way up there at 500 MB/s.  Ran MalwareBytes in parallel with MS Security Essential in parallel with ATTO in parallel with AS SSD.  No atapi errors and still great disk rates. 
    Nest removed as much Lenovo bloatware as possible. Reboot.  Still NO ATAPI ERRORS.  The Intel 520 SSD is better than the Samsung 830 looking at AS SSD and ATTO, but the Samsung is quite respectable.
    Solved? Yes mostly.  I took another Intel 520 SSD that was always used as a one for one copy of my chanel 0 Intel 520 SSD.  I put this other, identical copy, Intel 520 SSD in chanel 0 and again saw atapi errors.  I upgraded Lenovo software, but only the one critical update (Intel ACHI SATA Driver 11.2.0.1006).  Reboot. No more errors, BUT this (identical copy) Intel 520 SSD only works at SATA 2 rates.  ATTO and AS SSD never go higher than 250 MB/s.
    I will keep trying and get to the bottom of this.  Maybe I'll install all that other Lenovo updates and see if the "copy" Intel 520 SSD goes up to 500 MB/s.  Maybe I'll just copy the "working 500 MB/s" Intel 520 SSD to the "copy" Intel520 SSD but this is like giving up.  Jimbetto, I would recommend doing what I did.  Install ALL Lenovo updates and see if your problems go away.  Or, copy to a Samsung 830 and then see if your problems go away.
    Any comments from the group?

  • TP T60 SATA port / SATA III SSD?

    Hi, I have an old IBM/Lenovo TP T60 1952-CTO and I need a new hard drive. I immediately thought of buying some SSD (probably Micron RealSSD C400 128/256GB used in new ThinkPads). The problem is that these new SSDs are equipped with SATA III interface. My question is if my T60 has a SATA II port and if I can use that (or similar) SSD with this laptop.
    Thanks
    Solved!
    Go to Solution.

    Hello,
    Yes, that should work fine.  Unlike with older computers, there really is no capacity limitation for machines with SATA interfaces.
    Two other recommendations for upgrading are to bring your ThinkPad T60 up to 3GB of RAM (you can install 2×2GB of RAM, but the last 1GB of RAM will not be accessible due to chipset limitations) and to use a newer version of Windows than Windows XP on it, as the SSD, like all modern disk drives, uses a different sector size that Windows XP does not handle very well.  Windows Vista, 7 and 8 will all work fine, but most people seem to prefer Windows 7 due to its improvements over Vista.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • MBP 2011 13" - SATA III SSD's issues

    Hello,
    I have a MBP 2011 - 13" i5 and SATA III 6/3 from week 23 (June).
    SSDs have issues:
    Patriot Memory Wildfire fw 3.19 120 GB is unrecognized - The MBP can't find the SSD.
    Crucial M4 fw 009 128 GB - Installing time Snow Leopard > 1,5 h, freezes, beachballs all the time, impossible to use.
    I had a meeting at a Genuis Bar and the guy said to me: That isn't a cable issue because the HDD is recognized.
    What can I do?
    Best regards
    alex547

    This is starting to sound similar to the mid-2009 MacBook Pro issue. Those machines shipped with a chipset that supported SATA 3.0GB, but the firmware had them locked at 1.5GB. After people realized this and started to complain about it, Apple released a firmware update enabling 3.0GB support. Unfortunately, tons of people ended up having problems with trying to use third party 3.0GB drives (Apple shipped the machines with SATA 1.5GB drives). Basically, Apple's only response was that they didn't support third party drives. That issue was never resolved. After thousands of posts... it just faded away:
    http://support.apple.com/kb/ht3561

  • X120e - SATA III SSD okay to use?

    Hi everyone,
    I have my eye on this baby:
    http://www.engadget.com/2011/05/10/ocz-unveils-agility-3-and-solid-3-ssds-for-thrifty-speedsters/
    I'd like to know if the X120e have a full 6 gbps interface to handle it?
    Thanks again.

    No, the X120e only has SATA2 (3gbps) port.
    I have a fast SATA2 SSD in mine, (OCZ Vertex2) and it cant even reach SATA2 max speeds on it.
    | X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |

  • SATA II or III on late 2010 MBP - Also SATA III and SSD performance

    Hello:
    I would like to confirm that only the new 2011 MBP's have 6gb SATA interfaces. My MBP reports Series 5 and 3gb on both optical and HD bay. I have an SSD in the optical bay and a WD Scorpio Black in the HD slot. Both have a negotiated link speed of 3gb. I put the SSD in the optical bracket and the spinning drive in the real drive slot to take advantages of the physical protection in the HD bay.
    If the new MBP's have one SATA III channel, I would assume it's important to put the SSD in that slot.
    My SSD has a SATA II (3gb) interface. Some new ones have 6gb. Do SSD drives even approach that throughput or 3gb throughput? Which leads to the question, would a SATA III SSD perform better in a SATA III MBP?
    I know the benchmarks may not even be noticeable in real life use for most of us

    I have just out a SSD on my 2010 MBP, from all the info i could find both the HDD and optibay in the 2010 late SATA II, this is the reason i  put my SSD in the optibay as the speed would be the same.
    I did think about getting a SATA III SSD for the future when i upgrade but at the time they were very expensive and i had read reports about problems connecting to a SATA II.
    The new MBP do only have SATA III in the HDD spot so this would be the best place for any SATA III SSD.
    Personally on a 2010 MBP im happy, i still get great speeds Vs a HDD but with keeping the HDD in its original spot i get to keep spin down and the motion sensor.

  • SSD SATA-III in optibay

    Hi there.
    Should a SATA-III 6gigabit SSD work in the obtibay of a MacBook Pro 13" Early 2011?
    I get 6 Gigabit speed with 3 Gigabit negotiated when using a 5400 rpm HDD in the optibay.
    I'm asking, because I tried inserting a Intel 520 series 120gb SATA-III SSD in the optibay the other day - i was unable to format it from there, even though it showed.
    Regards,

    Ah okay, thank you.
    It's because I broke the SATA cable to the HDD bay.
    I've ordered a new cable, but I'd like to use the SSD untill then, if it was possible.
    Guess I'll have to wait it out, and cross my fingers that the new SATA cable works.
    Thanks again!

  • Macbook early 2011 supports ssd sata III?

    Hello, i have a macbook early 2011, I wonder if it supports SATA III ssd, if i remember your original hdd is sata II .. serial number: C1*******RJ7
    Thanks
    <Edited by Host>

    Yes it will.

  • Can I install a SATA SSD on my Mac Book Pro mid 2010 Model 7,1? OWC recommends a SATA 2 SSD to get get 3Gb/s transfer rate.

    I have a mid 2010 MBP Model 7,1 and I would like to swap out the HDD for a SSD.  I was looking at replacing it with a Samsung EVO 840 (500Gb) SATA 3 SSD with 6Gb/s transfer rate.  But OWC recommends a SATA 2 with 3Gb/s transfer rate.  OWC recommends the SATA 2 because  my system will allow 3GB/s whereas with the SATA3 it will restrict it to 1Gb/s. 

    I was looking at the Corsair website and found a couple rams they
    recommend. They both use 1.35V which I believe is the same voltage as my
    current 2x2G Ram.  I have a local computer parts vendor that carries the
    Corsair Rams for my MBP 13" but the voltage is listed at 1.5V.  Would they
    still be compatible with my system?
    Thanks for your help,
    mat28
    On Thursday, July 24, 2014, Apple Support Communities Updates <

  • Macbook Pro 2011 SATA III support

    I would like to know if the new Macbook Pro 2011 supports SATA III SSD's. I know the thunderbolt needs the Sandy Bridge to work, however I am not sure if that means that the chip will definitely support a SATA III SSD. Does anyone know ????

    Eww,
    Thank you very much or your response. I have a clarifying question. I am looking at buy a OCZ VERTEX 3 SATA III 2.5" SSD and I just want to be sure that if I spend the money on it I am going to get 100% functionality to include the 6/Gbps, minus of course the TRIM feature because from what I understand Apple locked it out. Do you know if this drive will work on the 2011 MacBook Pro.

  • ProBook 6465b - does it support SATA III?

    Hi,
    I have ProBook with A6-3410MX on AMD A60M FCH, which should has only 6Gbps SATA. But my friend has the same ProBook with A4 on the same chipset, and he's bought Crucial m4 SSD and benchmarks results show that it is only SATA II (3Gbps). Can anybody confirm that 6465b support or not 6Gbps SATA?

    zaanton wrote:
    Hi pepe,
    that's the point - it should support but results from AS SSD on my friend's 6465b shows that it not support SATA III. And I try to discover why. Is it hardware (HP do not include SATA III) or some software problems. Unfortunatelly, i don't have any SATA III SSD or HDD to check my notebook.
    http://www.anandtech.com/show/4253/the-crucial-m4-micron-c400-ssd-review
    Have a look at the write speed. My SATA II Corsair has the same write speed like the SATA III M4 256GB and 512GB. Reading is just 415MB/s (my has approx 275MB/s) for all of them. I would expect a better read/write performance from a SATA III SSD..
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Does DV6-6136tx support SATA III?

    I just bought this DV6-6136tx a week ago and I'm wondering if i can use SATA III SSD on it.
    The chipset is HM65 which should be able to support SATA III. 
    I want to confirm this before I upgrade my harddrive to SSD. 

    calvinkung wrote:
    Thank Kamat & Pepe. 
    I heard that there is a difference between the cable for SATA II and SATA III.
    Do you know the connector within this laptop is installed for SATA III or only for SATAII as Kamat said?
    And by the way, are you guys from HP? 
    The SATA III connectors may have more pins than SATA II but because SATA III is compatible with SATA II the connectors look like the same. I believe that SATA III connectors in Sandy Bridge laptops are installed for a hard drive and for an optical drive. I mean 2 different cables from 2 SATA III ports on the motherboard..
    Yes, Kamat works for HP, but I don't.. 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • HELP! sata 3 ssd for hp mini 110-3118cl netbook, but i can't install windows xp on it.

     Greetings, I recently bought an ocztech sata III ssd  for my hp mini 110-3118cl but I can't install windows xp on it. I have the xp sp3 install version with SATA drivers pre-packed. When the setup goes through the first re-start, it stops, shuts down and re-starts.  It also displayed an error at the beggining signaling something missing
     SSd's are very expensive and i exclusively want XP, not 7.  Any help?
    hp mini 110-3118cl
    windows xp 32-bit

    Hi:
    It is possible that the NM10 ACHI drivers are not part of that package though.
    Please read this guide for slipstreaming drivers into a copy of your installation disk and see if that works.
    http://www.mediafire.com/?z41dc9tyx4jyyys
    Paul

Maybe you are looking for