Adding a search help to standard field
hi
My requiremnt is to add a search help to the field Corporate Group(KONZS) in XD01(customer Master data) table KNA1
Can anyone suggest how to go about
Thanks in Advance.
Hi
Sorry, but I think that you must see the SAP Note 512840 - Search customer master record with search term 1/2
Regards
Eduardo
Similar Messages
-
How to change search help for standard field in me51n.
hi frnds,
I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
best regards,
sudip biswasHi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable. -
How to add search help for standard field LIKP-TRAID
Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
AbhiHi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable. -
Custom search help on standard field of PO Item
Hi all,
any one know a way to build a custom search help on field EKPO-AFNAM in transaction ME21n,ME22N?
I'd prefer don't change the standard data element adding the search help. Is there a standard way, like badi or user exit?
I'm using ECC 6.0
Regards,
enzoCheck all Ewxits
Transaction Code - ME21N Create Purchase Order
Exit Name Description
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
No of Exits: 35
Transaction Code - ME22N Change Purchase Order
Exit Name Description
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
No of Exits: 35
Rewards if useful....................
Minal -
Search help for standard field BASEG-ZUONR
Hi Guys,
I am working on the standard transaction FB60 for vendor invoice posting.In this transaction item level we have the field Assignment Number BSEG-ZUONR.
I need to provide the search help for this field.In SAP we don't have search help for this field.
Please suggest me the best way to provide the search help for this.
Is it possible to provide the search help through the transaction variant.
Regards,
RameshHi,
May be you can refer to the following link
[Search help enhancement in VA01;
Regards,
Mahesh -
Attaching Search Help to Standard Field
Hi,
In QAPP table, i want to attach customized Search Help to USERN2 field. So i take access key for that data element but still it's not modifiable mode.
so can you please tell me how to attach search help to that field.
Regards,
Pushkar.Hi,
Goto to the table QAPP, goto the entry help/check tab and in that keep the cursor on the field USERN2 and press the search help button below the tab and you can insert the search help only if you have the access key to changes.
Reward if useful.
Thanks,
Muthu. -
Add search help to standard field in shopping cart
Hi Experts,
We are on a SRM 5.0 implementation for classic scenario.
In the item basic details we have a field tracking number. (BE_TRACKING_NO). We have a requirement to add a search help (drop down with fixed values) to this field. Is this possible to do on a standard way? The fixed values we will need to get from the attributes the user has assigned.
Regards,
Tomit needs to be done from backend
you can customise the field to appear from the backend in the portal, and then add a code like a normal field has to build
a help
check ptarQ>customising > additional fields -
Search Help for standard field
I need to enhance the existing collective search help provided for a certain standard field(ex.Field XXX).
However while providing this additional search help, I need to show XXX data along with YYY( this is maintained in some other table but linked to XXX) .Is it possible.Hi,
You can create view and join both tables. Then use this view in search help.
Krzys -
Re: Search Help for Standard field in a Standard Component
Dear Experts
i enhanced a standard screen with one inputfield and mapped a context attribute(The attribute is also standard one which doesnot have search help) my requirement is to assign a search help to the context attribute so that at runtime the user can click on the search help and the value will be passed to backend for processing.
i tried it with dynamic programmin but im getting null access error,
Experts please guide me to set a dynamic search help to the standard context attribute.
Regards
Arun.K.PHi Friends,
I solved the issue this is the solution
DATA lo_nd_location_data TYPE REF TO if_wd_context_node.
navigate from <CONTEXT> to <ACCOUNT_DETAIL> via lead selection
lo_nd_location_data = wd_context->path_get_node( path = `LOCATION_DATA` ).
lo_nd_location_data = wd_context->get_child_node( name = wd_this->wdctx_location_data ).
DATA lr_node_info TYPE REF TO if_wd_context_node_info.
lr_node_info = lo_nd_location_data->get_node_info( ).
CALL METHOD lr_node_info->set_attribute_value_help
EXPORTING
name = `COMPANY_CODE`
value_help_mode = lr_node_info->C_VALUE_HELP_MODE-DDIC
value_help = 'BBP_LOCATION_VALUE'.
Best Regards
Arun.K.P -
Adding a Search Help to a Field Exit
Hi!!!.
I have a little doubt with field exits.
I have just created a field exit for field BEDNR. The next thing I'd have to do is to assign the same help search used for LFA1-BRSCH field ( H_T016 Search Help ) in field exit's function module.
The question is: How can I do that?. Does anyone have a clue of a function to retreive the values of that search help?. Could anybody tell me how should I do that?
Thaaaaanks in advance!
RaúTry function module F4IF_FIELD_VALUE_REQUEST and fill in tabname with 'LFA1', fieldname with fieldname, search help with name of search help('H_T016') and the field you are searching on in shlpparam which must be one of the parameters in the search help you heve entered.
Hope this helps
Regards
Larissa Maryniuk -
Search Help for standard field in WEB GUI
Hello Experts
There are F4 help for Business Partners (street and district that are standard address fields) and it is visible from SAP GUI. However in WEB UI there are no input help (although they are standard) for these fields.
Is there customizing step for it or do we need to write some codes (get_v, get_p methods) in order to get F4 help.
Thanks in advance,
ErkanTry creating design layer in SPRO>CRM>UI FRAMEWORK>UI FRAMEWORK DEFINITION>MAINTAIN DESIGN LAYERS
Enter component for business partner and define new design layer. To this layer assign a field by which you want to search.
Then go to SPRO>CRM>UI FRAMEWORK>UI FRAMEWORK DEFINITION>CONFIGURE USER INTERFACE. Again enter the same component and go to the relevant context node and then field. Then assign to that field newly created design layer.
Info about components, context nodes and fields you get by pressing F2 on thous 2 fields in WEB UI. -
Adding search help to standard SAP field
Hi Experts,
I need to add search help to field ZUONR i.e assignment field in various tcode like fb70,fb60,f-02.etc which will select data from
Z tables . I have found out serach help exit F4IF_SHLP_EXIT_EXAMPLE but as per my knowledge that is to change existing standard search help.But to field ZUONR there is no search help attached.How can new Z search help be added to field ZUONR without use of access key.
Please suggest.
Regards,
Kaustubh Kabre.Hi,
I don't know how to change "Value table" field on domain without access key, but if nothing else work, you can add new fixed values. From menu Goto->fixed value append.
Other possibility is to use GuiXT -> write script that will call your FM that will get data from your table and show them.
Best regards
Marcin Cholewczuk -
Adding Search help to a field of standard transction
hi experts,
i m new to abap.
my pp consultant wants that in transaction MM03, for the field on selection screen (Material) one more search help should be added. and on pressing f4 it should be displayed there with other search options.
The search field is "(Document)-Number of the drawing that exists for this object".
Note: To see this field run transaction MM03, enter a material and press enter then we get a screen to choose a view. choose basic data2. In the block "design drawing" there is a field for "Document".
is it possible? if yes how much time it would take and to do it.
how should i go about it.
plz help.Hi ANNIE,
Go through the following Procedure to add a Search help to a field of standard Transaction
The Matchcode is replaced by search help from the version 4.6C.
I will tell u how create the search help.
Name of a search help
A search help is an object of the ABAP Dictionary with which input helps
(F4 helps) can be defined.
There are the following types of search helps:
o Elementary search helps implement a search path for determining the
possible entries.
o Collective search helps contain several elementary search helps. A
collective search help therefore provides several alternative search
paths for possible entries.
o Append search helps can be used to enhance collective search helps
delivered by SAP with customer-specific search paths without
requiring a modification.
The three components of the input help process described by a search
help are the outer interface, the online behavior and the method of data
Go to Tcode SE11. Select the search help radio button.
Give name as ztest and click create
There are two types of search help.
Once is elementary search help
& collective search help
Choose one.
Add the data element.
MatchCode is replaced by search helps.
To attach a search help to a field.
Use this code.
at selection-screen on value-request for source.
progname = sy-repid.
dynnum = sy-dynnr.
clear value_tab.
refresh value_tab.
Filling the Value_tab internal table by itab2 internal table.
loop at itab_desc.
write itab_desc-description to value_tab.
append value_tab.
endloop.
prog = sy-repid.
no = 1000.
clear tab.
refresh tab.
Building the Structure of the Seach Help.
tab-tabname = 'FMFCTRT'.
tab-fieldname = 'BESCHR'.
collect tab.
Function Used to provide Search Help.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BESCHR'
dynpprog = prog
dynpnr = no
dynprofield = 'SOURCE'
window_title = 'Function'
TABLES
value_tab = value_tab
field_tab = tab.
Regards
Sreeni -
Need some help in creating Search Help for standard screen/field
I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewardedHi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh -
Adding elementry search help to SAP standard Collective Search help
Hi,
I had copied standard elementary search help to MAT0M to ZZ_MAT0M and added some more fields and activated to it.
it got activated sucessfully.
Now i have to attached the ZZ_MAT0M elementry search help to standard collective search help MAT1_A.
How can i do that?
can i add it directly to MAT1_A (sell --->search help <MAT1_A> changes --> in included search helpss tab using + (insert icon) )
Thanks & regardsI solved my problem :
I had copied standard elementary search help to MAT0M to ZZ_MAT0M and added some more fields and copied Database View M_MAT1M to ZZ_M_MAT1M and addedd same fields and activated both.
both got activated sucessfully.
Now i have to attached the ZZ_MAT0M elementry search help to standard collective search help MAT1_A and this Z-search help shd appear on the first tab.
so I just went to collective search help MAT1_A in change mode --> click on "+" icon addedd my ZZ__ search help, save and activated it.
If you dont really care in which tab your search help shd appear, then the best option is to use Append Search help.
Note : if you are directly adding your search help in collective standard search help, then its better to remove hotkey form your custom elementry search help, as, if not remove will lead to warnings or make sure that you have unique hotkey in that collective search help.
Maybe you are looking for
-
I'm currently running PS4 on my iMac and am having issues in viewing some of the tools. Tools such as custom shape tool are subdued. I've even gone so far as to go to Edit-->Menus--> select the custom shape tool is viewable. I've also tried the "path
-
Spry Image Slideshow, IE8 & 7 not finding .js resources, works fine in FF
Pointing to http://labs.adobe.com/technologies/spry/ui/samples/ImageSlideShowWithThumbFS.html in IE and the spry scripts are not loading. Any words of wizdom? I have confirmed this behavior on 3 differenct machines. I put together a prototype (work
-
Hello everybody, I have a Process chain which contains a bunch of Variants and ABAp Pgms and other process. Now when i transport from Dev. to QA all of the process and variants gets transported except one of ABAP Pgm. To be more clear out of 5 abap p
-
The extension cannot be installed, it requires illustrator
I installed Adobe Extension Manager and enable Exchange and followed the directions from the website page: http://pazzles.com/support/electronic-cutters/inspiration/illustrator-plugin/ to try to apply a plug-in for this die-cutter machine I purchased
-
Stored procedure API: does "TEXT" equal "CURSOR"?
I'm trying to call an Oracle stored procedure from Java. The API for the stored procedure has a couple of OUT parameters that are labeled type "TEXT," and it appears that each of these parameters has many subordinate parameters that are of simple typ