Adding a second image
Hi,
This must be a simple task, but when I open an image and latter decide to change the sky how do I bring in the second as when I try it it changes the original image to the new one.
Alan
Cheers Curt,
I know that bit,what I am trying to get to is I've got one image open in Photoshop, but if I need to open another image latter say to change the sky, I go to File, Open then pick the image I want and open it, it comes up in photoshop but the 1st image cannot be seen to work on it or to move the second image to the first. I could move both images to a file and open both images together, but at the time I don't know which 2 images I need if any.
So how do I get the second image to appear on the same workspace as the first when I open it. have seen it happen on some tutorials but they dont show how they just seem to open it and its there, but when I do it, the same thing does not happen.
Alan
Similar Messages
-
A number of DNG images already existed on my HDD prior to installation of LR3. Now I would like to bring them into LR. Only practical way that I have found is, in Library view, to "Move" them from one folder to another folder. Just completed that maneuver for a number of them. I had added five other images, using the "Copy" mode. If I open the catalog called "All Photographs", the five show up as grayed out (already imported).So the following questions suggest themselves:
Is there a way to import existing images, which does not involve creation of a new folder?
What could have happened to the catalog created when those were imported?
Is there a way to re-import an image without duplication?
tks,
jwcYou wrote:
Is there a way to import existing images, which does not involve creation of a new folder?"
No, unless you give them different file names. As a general rule, not only for LR, you cannot have 2 files with the same name in one and the same folder.
If for instance you rename an image file in LR and give it the same name as an already existing one, LR will add the suffix "-1" to the second file.
"Is there a way to re-import an image without duplication?"
Why would you want to do that? If it was possible you would replace one image-file with another that has the same name.
If images are already in the catalog and for some reason you want them twice in LR, you have to do what you did: put them in adifferent folder.
WW -
When adding a tween, images become pixelated
I've used timline/animation in Photoshop for awhile, but just noticed, when I add tweens between two images, the original images become pixelated when I save as animated GIFs.
Test #1
Photoshop file with two layers -- each with a photograph
Timeline: frame 1 has image from layer 1 and frame 2 has image from layer 2
Choose Save For Web and the images look pretty goodI realize that GIFs are only 256 colors
Test #2
Create Photshop files as in Test #1
Add a tween with 1 frame
Choose Save For Web and the images look pretty good
Test #3
Create Photshop files as in Test #1
Add a tween with more than one frame
Choose Save For Web
The images are now pixelated
Trash...
All but one tween and an image is no longer pixelated, OR
All tweens and an image is no longer pixelated
In other words, Saving For Web is fine as long as I don't add any tweens. As soon as I do, the images become pixelated. Take out the tweens, the pixelation goes away. And, I have tried to make all kinds of adjustments to the GIFs.
Any help would be appreciated!
Thanks--RobertHI Jeffrey:
I can surely post some photos (screen shots from the Save As Web interface) of what I'm talking about and share the PSD file as well.
• First image before Tween
If you carefully look at the light brown vertical paint just behind the girl's right shoulder -- no big pixelated dots. And the guy's sweatshirt looks fairly smooth in transitions from highlights to shadows.
• Second image after adding Tweens
You'll now notice all the extra dots -- especially in the vertical brown paint job and other parts of the wall and his shirts.
And it gets worse with other images/animations I've recently created.
One thing I didn't mention is that I noticed this a few months back. This morning, I realized that's when I got rid of my old trusty 21" CRT monitor and got an LCD flat panel. I hooked up my old CRT and the dots are gone! But that doesn't resolve the issue of why when you add tweens, does it pixelate.
Here's a link to the test.PSD file: https://dl.dropboxusercontent.com/u/109581077/test.psd
Any help would sure be appreciated! And if you need me to create a video of the steps I'm doing, I can do that to.
Thank you!
Robert -
I have followed the instruction relating to Icloud connection.When i went to system preferences, my Apple address is continually rejected. I have added a second email as suggusted by an Apple site but i still get the same message. Im not told why the Apple ID/email is not accepted when it is accepted in all other Apple sites. I changed my password numerous times to ensure it wasnt the password but to no result. It continued to state that my Apple ID was the problem. I live in Malta,Europe. Have new Apple Mac Pro and Ipod. The annoying thing is that ICloud continually send me the problem notice but do nothing to tell me how to fix it? Can i switch this notice off? Help???????
Welcome to the Apple community Yao.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
I've reviewed some of he discussion on adding a second Time Machine but two issues arise. The information relates to older Time Machine software and leads to confusion.
I have an Airport Extreme with S/W version 7.6.4 and would like to add a newer Airport Extreme to back up the older one. Reading the suggestions on adding a new TC didn't cover the newer Time Machines and I could find Apple's instructions for doing it.
Somewhere I read that the new TC could be connected to the old TC but forgot the port setup. Also, newer instructions for adding a second TC so both the old and the new acquire the same data could not be found.
Hope This question is clear. Is there help on this?The network setup is fairly trivial.
Plug TC2 into TC1. (the hardware is Time Capsule.. TC as per your title.. or is it Airport Extreme as per your question..?? Time Machine is software on your computer.. and totally unrelated to the hardware.)
Makes no difference which way around you do it. Plug WAN of the 2nd device into LAN of the 1st device. And setup the 2nd device in bridge.. wireless is up to you.. off or on?? Roaming or not??
As far as backup is concerned.. you need to be clear in the question. And sorry it is a bit mixed up now.
But I can tell you what you cannot do.
You cannot backup to both units at once. You can however setup Time Machine in the computer to backup sequentially to both.
See Q34 http://pondini.org/TM/FAQ.html
The TC itself cannot backup to another TC.
(extreme with hard disk amounts to the same thing.. with caveats)
You can backup one TC to another manually via a computer.. it is slow and I do not recommend it.. if a fault creeps into backup1, you are simply copying said fault to backup2.. AND it is poor for another reason.. Time Machine cannot do it.. you will need another utility eg Carbon Copy Cloner.. and even then you will probably end up backing up a huge amount of data every time.. since TM works so strangely you cannot just backup differences. -
I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?
I found that the Thunderbolt input accepts the mini-DVI (in my case converter to VGA for a tutorial use monitor)
BUT, you have to really oush it in 'til it clicks. I thought it too loose until I tried it. works just fine!!
i get a solved for my own LOL
Ed -
Adding a second internal HDD on a Satellite A350-20s
I have a Satellite A350-20s.
It is described in its documentation as having the option to add a second internal 2"5 hdd, and a indeed there is a place reserved for it..
The problem is that when I remove the cover to insert the hdd there is no connector.
So, how to do it ?Hi buddy,
Well, I have even checked the manual of my Satellite A350 and there you can see that the manual shows second HDD slot. But as Paolo30 wrote installing such a HDD is depending on the HDD controller You can only install such a HDD if you have a second HDD connector.
In my opinion all its ok because the manual doesnt mention that adding a second HDD is possible on every notebook. ;)
By the way: If you need more disk space you can use an external HDD, for example 2.5 one. Such HDDs dont need an additional power supply, you need only an USB cable to connect it. ;) -
Is it possible to put a drop shadow on text added to an image?
Is it possible to put a drop shadow on text added to an image using Photoshop Elements 10?
Yes.
Open the Effects palette. In the drop-down. go to "Drop Shadows." You will find several listed. After you have applied, double click on the f on the text layer in the layers palette. This will bring up the Style Settings. Here you can fine-tune the shadow..
Note that in the drop-down referenced above, there are also Bevels which may enhance your presentation. -
I am working on an extended IMAQ Display control using LabVIEWs XControl capabilities.
I need a copy of the original image passed to add some overlays which must not affect the original image. To achieve this I am creating a backup image in the "Init.vi" and deleting it in the "Uninit.vi". I am storing the reference of this image in the "Display State.ctl" which is part of every XControl.
As soon as I am adding an "IMAQ Image.ctl" to the Display State cluster, it is no longer possible to generate a probe of the Display State cluster for debugging purposses. I am always getting the message: "Failed to load or create probe."
Deleting the "IMAQ Image.ctl" from the cluster makes the probe working again.
Is it a bug or am I doing something wrong?
I am working with LabVIEW 8.5 and Vision 8.5.
Regards
Ingo BartschHello Mr. Bartsch,
is it possible for you to post a small example to reproduce the behaviour? It would be helpful to get a description in which way you use the typedef files.
I found a example/knowledge base where some informations were included to XControl and LV but not with Vision.
http://digital.ni.com/public.nsf/allkb/1DC1ADD2A136DA298625712C00635758?OpenDocument
Best wishes
Jan Kniewasser
Jan Kniewasser | Applications Engineer | Tel.: +49 89 7413130 | Fax: +49 89 7146035 -
Psychadelic effects when opening second image from RAW
Photoshop CS6 beta 64 bit, Windows 7 Pro 64 Bit
Radeon HD4850
Working on PSD file, then opened second image from ACR. After choosing 'Open Image' from ACR the second file appeared onscreen, with the first image behind it in psychadelic colours.
Zooming caused the second image to leave ghost images on the psychadelic background.
Unable to work in either image, had to close down using Task Manager.Sounds like it could possibly be a graphic card issue. Have you updated your drivers recently? Up to date drivers usually take care of issues like this. You might even want to reinstall the drivers.
If that doesn't work, make sure to post your system info as a reply. System Info from Photoshop -
How to change security questions after adding a second email address?
I'm at a loss and really really frustrated with Apple for the first time in my life.
I've added a second email address and tried over the last 3 days on my iPad and Mac to change my security questions. There is no option present that I can see that allows you to do this without first entering the answers. (to which I don't know anymore)
I called Apple support (even in english) and every time the call has been dropped.
In all the years since switching to Apple I've always been impressed with the level of customer service. This is the first time that I've felt this level of sincere frustration.
I'm not sure why I have to book a time to speak with someone. Updating or changing security questions, should be a process one can do over the internet. I'm confused either way why questions are necessary if the apple password entered was correct. It's not my bank account; why the need for such extreme security just to download an app paid for by an iTunes card!
Any help or direction would be appreciated!!
Thank you
KateHello there, Kate.
Apologies for your frustration. For your security the existing questions need to be answered before new ones can be created. The following Knowledge Base article provides some additional steps to try if you are unsure of the answers to the existing ones:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Specifically:
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Rollover image not displaying second image, please help me
Hello,
I am trying to get 4 buttons on my page to display one image and then when a mouse rollsover to display a second image. I have created 8 images. 2 for each of the 4 buttons.
http://caliberproductsinc.com/Caliber%20Marine/boatrollers.htm
Here is my page. The 4 buttons I am concerend with are the "questions, manuels brochure, news" at the bottom. The image displayed is the first image the second "rollover" image is the same except our logo turns red.
I placed them by using insert, image objects, rollover image. I pointed the first to the image that you are seeing and the "rollover image" to the red version. The first image shows up fine. The second never shows up? Can anyone tell me why? What am I doing wrong?
Thanks"...dry roted...." - I assume you mean "dry rotted"?
Anyhow, on line 35 of your code, change this -
function MM_swapImgRestore() { //v3.0
to this -
function MM_swapImgRestore() { //v3.0
That slash doesn't belong there. -
Hi,
I've have just added a second optical drive to my MP, it's an LG, "HL-DT-ST DVDRAM GSA-4120B" according to system profiler. I'v left the original apple superdrive as-is, and put this in the second bay. I'm pretty sure I've set it's jumpers to "slave", but it was in an external bay and I don't have a manual or anything, so I'm not 100% sure.
Both drives work fine, on their own, but they don't seem to want to work together. Programs seem to have to wait for the 2nd drive to finish whatever it is it's doing, before they can get access to 1st drive (or vice-versa).
I was under the impression that both drives can be working at the same time, and it would seem pointless having two drives if they can't work at the same time?
I don't have to change anything about the original superdrive when adding a second drive, do I?Hi,
I've have just added a second optical drive to my MP,
it's an LG, "HL-DT-ST DVDRAM GSA-4120B" according to
system profiler. I'v left the original apple
superdrive as-is, and put this in the second bay. I'm
pretty sure I've set it's jumpers to "slave", but it
was in an external bay and I don't have a manual or
anything, so I'm not 100% sure.
Both drives work fine, on their own, but they don't
seem to want to work together. Programs seem to have
to wait for the 2nd drive to finish whatever it is
it's doing, before they can get access to 1st drive
(or vice-versa).
I was under the impression that both drives can be
working at the same time, and it would seem pointless
having two drives if they can't work at the same
time?
I don't have to change anything about the original
superdrive when adding a second drive, do I?
Looking at your specs. the drive is an LG. I have an LG as well not the same model but I set my jumper to Cable Select, that is what worked and it is the same setting as the original Sony SuperDrive.
I am certain it will work as it did no mine.
My specs:
ATA Bus:
SONY DVD RW DW-D150A:
Model: SONY DVD RW DW-D150A
Revision: 1.MD
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: No
HL-DT-ST DVDRAM GSA-H10L:
Model: HL-DT-ST DVDRAM GSA-H10L
Revision: LL10
Serial Number: K18E8582228
Detachable Drive: No
Protocol: ATAPI
Unit Number: 1
Socket Type: Internal
Low Power Polling: No
William -
Adding a Second Airport Express
Is there a trick to adding a second Airport Express? My network is created by an Airport Extreme. Six months ago, I added an Airport Express to get better coverage upstairs (no problems). Now I want to add a second Airport Express to extend coverage to the back of our house. I plug in the Airport Express but it never shows in the Airport Utility. I have tried over and over and it never appears.
The second Express can "extend" the signal provided by the AirPort Extreme, but it cannot "extend" the signal from the AirPort Express that is already "extending".
The Express always needs to be located where it can receive a strong signal from the main router in order to "extend" that signal.
Might that be the issue here? The second Express is possibly located too far from the AirPort Extreme?
If we need to do some more checks, is your Mac runnign OS X 10.6.8 as your profile indicates? -
Add second image of the same category of xml
I ask everyone's help to add a second image of the same category of my xml.
banco.xml
<?xml version="1.0" encoding="utf-8"?>
<photos>
<photo>
<filename>01.png</filename>
<filename2>01-01.png</filename2>
<title>Bolsa Feminina Pequena</title>
<description>
Descrição é aqui, 25 cm altura
</description>
<valorde>199,00</valorde>
<valorpor>159,90</valorpor>
<marca>Jhenyfer loopes</marca>
</photo>
<photo>
<filename>02.png</filename>
<filename2>02-01.png</filename2>
<title>Bolsa Feminina Longa</title>
<description> Descrição é aqui, 25 cm altura </description>
<valorde>89,00</valorde>
<valorpor>69,99</valorpor>
<marca>Ana Gabriella</marca>
</photo>
</photos>
Action
import caurina.transitions.Tweener;
var folder:String = "photos/";
var timer:Timer;
var i:Number;
var tn:Number = 0;
var pic:Number = 0;
var previous_no:Number = 0;
var current_no:Number = 0;
var tween_duration:Number = 0.2; // seconds
var total:Number;
var flashmo_xml:XML;
var flashmo_photo_list = new Array();
var photo_group:MovieClip = new MovieClip();
this.addChild(photo_group);
this.addChild(photo_title);
this.addChild(photo_description);
this.addChild(valor_de);
this.addChild(valor_por);
this.addChild(mc_marca);
photo_button.alpha = 0;
photo_button.buttonMode = false;
photo_group.x = flashmo_photo_area.x;
photo_group.y = flashmo_photo_area.y;
photo_group.mask = flashmo_photo_area;
photo_group_info.text = "";
photo_title.text = "";
photo_description.text = "";
valor_de.text = "";
valor_por.text = "";
mc_marca.text = "";
function load_gallery(xml_file:String):void
var xml_loader:URLLoader = new URLLoader();
xml_loader.load( new URLRequest( xml_file ) );
xml_loader.addEventListener(Event.COMPLETE, create_photo_rotator);
function create_photo_rotator(e:Event):void
flashmo_xml = new XML(e.target.data);
total = flashmo_xml.photo.length();
for( i = 0; i < total; i++ )
flashmo_photo_list.push( {
miniatura: flashmo_xml.photo[i].miniatura.toString(),
filename: flashmo_xml.photo[i].filename.toString(),
title: flashmo_xml.photo[i].title.toString(),
description: flashmo_xml.photo[i].description.toString(),
valorde: flashmo_xml.photo[i].valorde.toString(),
valorpor: flashmo_xml.photo[i].valorpor.toString(),
marca: flashmo_xml.photo[i].marca.toString()
load_photo();
photo_title.text = flashmo_xml.photo[0].title.toString();
photo_description.text = flashmo_xml.photo[0].description.toString();
valor_de.text = flashmo_xml.photo[0].valorde.toString();
valor_por.text = flashmo_xml.photo[0].valorpor.toString();
mc_marca.text = flashmo_xml.photo[0].marca.toString();
function load_photo():void
var pic_request:URLRequest = new URLRequest( folder + flashmo_photo_list[pic].filename );
var pic_loader:Loader = new Loader();
pic_loader.unload();
pic_loader.load(pic_request);
pic_loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, on_photo_progress);
pic_loader.contentLoaderInfo.addEventListener(Event.COMPLETE, on_photo_loaded);
pic++;
function on_photo_progress(e:ProgressEvent):void
var percent:Number = Math.round(e.bytesLoaded / e.bytesTotal * 100);
photo_group_info.text = "Loading image... " + pic + " of " + total + " (" + percent + "%)";
function on_photo_loaded(e:Event):void
if( pic < total )
load_photo();
else
photo_group_info.text = "";
var flashmo_pic_bm:Bitmap = new Bitmap();
var flashmo_pic_mc:MovieClip = new MovieClip();
flashmo_pic_bm = Bitmap(e.target.content);
flashmo_pic_bm.smoothing = true;
flashmo_pic_mc.addChild( flashmo_pic_bm );
flashmo_pic_mc.name = "flashmo_pic_" + photo_group.numChildren;
if( photo_group.numChildren > 0 )
flashmo_pic_mc.alpha = 0;
photo_group.addChild( flashmo_pic_mc );
function change_photo():void
if( current_no >= photo_group.numChildren )
current_no = 0;
if( current_no < 0 )
current_no = photo_group.numChildren - 1;
Tweener.addTween( photo_group.getChildAt(previous_no), { alpha: 0, time: tween_duration,
transition: "easeInOutQuart" } );
Tweener.addTween( photo_group.getChildAt(current_no), { alpha: 1, time: tween_duration,
transition: "easeInOutQuart" } );
previous_no = current_no;
photo_title.text = flashmo_photo_list[current_no].title;
photo_description.text = flashmo_photo_list[current_no].description;
valor_de.text = flashmo_photo_list[current_no].valorde;
valor_por.text = flashmo_photo_list[current_no].valorpor;
mc_marca.text = flashmo_photo_list[current_no].marca;
function pic_over(e:MouseEvent):void
var mc:MovieClip = MovieClip(e.target);
Tweener.addTween( mc, { alpha: 0.1, time: tween_duration, transition: "easeIn" } );
function pic_out(e:MouseEvent):void
var mc:MovieClip = MovieClip(e.target);
Tweener.addTween( mc, { alpha: 0, time: tween_duration, transition: "easeOut" } );
flashmo_previous.addEventListener( MouseEvent.CLICK, pic_previous );
flashmo_next.addEventListener( MouseEvent.CLICK, pic_next );
function pic_previous(e:MouseEvent):void
current_no--;
change_photo();
function pic_next(e:MouseEvent):void
current_no++;
change_photo();
I created a movieclip with instance name flashmo_photo_area2
PROJECT DOWNLOAD
http://www.solutionvix.com/as3project2012.zipThe project is working normally I want is to add another image to display on the screen capturing the second image of the same category of xml.
Example xml:
<photos>
<photo>
<filename>01.png</filename>
<filename2>01-02.png</filename2> <-- add
<title>Bolsa Feminina Pequena</title>
<description>
This flash photo rotator is provided by flashmo.com for free of charge. You may download, edit and use the source file for any purpose. Lorem ipsum dolor sit amet, consectetur adipiscing elit.
</description>
<valorde>199,00</valorde>
<valorpor>159,90</valorpor>
<marca>Jhenyfer loopes</marca>
</photo>
Action
flashmo_photo_list.push( {
filename2: flashmo_xml.photo[i].filename2.toString(), <-- add
filename: flashmo_xml.photo[i].filename.toString(),
title: flashmo_xml.photo[i].title.toString(),
description: flashmo_xml.photo[i].description.toString(),
valorde: flashmo_xml.photo[i].valorde.toString(),
valorpor: flashmo_xml.photo[i].valorpor.toString(),
marca: flashmo_xml.photo[i].marca.toString()
function load_photo():void
???????? <-- add
var pic_request:URLRequest = new URLRequest( folder + flashmo_photo_list[pic].filename );
var pic_loader:Loader = new Loader();
pic_loader.unload();
pic_loader.load(pic_request);
pic_loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, on_photo_progress);
pic_loader.contentLoaderInfo.addEventListener(Event.COMPLETE, on_photo_loaded);
pic++;
Maybe you are looking for
-
Spry Collapsible Menus open state
I am a bit stuck. I have the collapsible Menu widget in a PHP page which is included in all the other pages. When I go from one page to another the include is reloaded and the menu returns to it's default state. What I really want is for the menus to
-
How can I replicate a source table that doesn't have any primary keys?
We have transactional replication setup in our workplace. In the source database, there are some tables that do not have any primary key. 1) How can I get these tables to replicate in the current scenario? 2) Is it possible to introduce foreign eleme
-
JDBC-Adapter-Receiver Calling Stored Procedure with Input-Typ Record
Hallo, I´ m trying calling a stored-procedure with two input-parameter; one of typ record (oracle) and one of type tabel of records. Is this possible (I think there are only types like string, integer etc. possible)? When not is there another possibi
-
Apple Remote Desktop 2.2 not able to do a storage report
For some reason after updating to 10.4.7 i am unble to request a storage report to 1 or more computers. It comes back to me and says "Report database access not allowed" so im not sure where to begin. I can do a network test and i can chekc administr
-
In Design CS 5.5 --- Question about Leader Dots ("RIGHT TAB")
In Design CS 5.5 --- Question about Leader Dots ("RIGHT TAB") http://www.youtube.com/watch?v=e4kiyByY4A0 Can anyone help???