Adding a second internal drive: missing cable?

I recently purchased a Quad G5, to which I want to add a second internal drive. However, when I opened up the unit, only the smaller power supply cable was present. The wider controller cable seems no where to be found. I pulled the drive from my Dual G5, so I'm aware where the cable is SUPPOSED to be located. But nada. Has anyone had a similar experience? Did they short me a cable or is the thing hidden somewhere where I can't find it?

I recently installed a second internal HD and found both cables, but you have to look for them. One of the cable/plugs is located below where the HD goes. You probably found it right away. You just need to pull it out a little to plug it into the new HD. It's kind of an awkward angle but it seemed secure. The second cable is probably the one you're having trouble with. The original HD is plugged into the last plug on the cable. Unplug it from the original HD and pull it down and out. You'll find a second plug (in series) on the cable. Plug the original HD into the plug you just discovered and use the original plug for the new HD. Hope this helps!
G5 Quad 2.5 w 3G   Mac OS X (10.4.3)   Since '84

Similar Messages

  • Second internal drive missing after 10.4.11 update

    After gathering dust for some time I've decided up update the OS on an old B/W GS so it is compatible with my ISP. I have 2 internal drives and one external firewire. During the install I saw the second internal drive (which was the former boot volume running 10.2.X) in the list of available drive for install. But after the OS update the second internal drive is MIA. I believe it shows up in the System Profiler report (but with the I'm not sure one is not the Firewire). Any ideas?

    I checked the connection and settings are they are according to the manufacturer's recommendations. Upon opening the Mac I saw (then remembered) that the second drive was connected via a Sonnet PCI card. I believe the problem is that the firmware for that card needs updated.
    To reinforce that opinion, I've discovered that the drive still appears when booting in 9 and 10.2.x. It's very likely a 10.4. thing.

  • Adding a second optical drive

    Hi,
    I've have just added a second optical drive to my MP, it's an LG, "HL-DT-ST DVDRAM GSA-4120B" according to system profiler. I'v left the original apple superdrive as-is, and put this in the second bay. I'm pretty sure I've set it's jumpers to "slave", but it was in an external bay and I don't have a manual or anything, so I'm not 100% sure.
    Both drives work fine, on their own, but they don't seem to want to work together. Programs seem to have to wait for the 2nd drive to finish whatever it is it's doing, before they can get access to 1st drive (or vice-versa).
    I was under the impression that both drives can be working at the same time, and it would seem pointless having two drives if they can't work at the same time?
    I don't have to change anything about the original superdrive when adding a second drive, do I?

    Hi,
    I've have just added a second optical drive to my MP,
    it's an LG, "HL-DT-ST DVDRAM GSA-4120B" according to
    system profiler. I'v left the original apple
    superdrive as-is, and put this in the second bay. I'm
    pretty sure I've set it's jumpers to "slave", but it
    was in an external bay and I don't have a manual or
    anything, so I'm not 100% sure.
    Both drives work fine, on their own, but they don't
    seem to want to work together. Programs seem to have
    to wait for the 2nd drive to finish whatever it is
    it's doing, before they can get access to 1st drive
    (or vice-versa).
    I was under the impression that both drives can be
    working at the same time, and it would seem pointless
    having two drives if they can't work at the same
    time?
    I don't have to change anything about the original
    superdrive when adding a second drive, do I?
    Looking at your specs. the drive is an LG. I have an LG as well not the same model but I set my jumper to Cable Select, that is what worked and it is the same setting as the original Sony SuperDrive.
    I am certain it will work as it did no mine.
    My specs:
    ATA Bus:
    SONY DVD RW DW-D150A:
    Model: SONY DVD RW DW-D150A
    Revision: 1.MD
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Low Power Polling: No
    HL-DT-ST DVDRAM GSA-H10L:
    Model: HL-DT-ST DVDRAM GSA-H10L
    Revision: LL10
    Serial Number: K18E8582228
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 1
    Socket Type: Internal
    Low Power Polling: No
    William

  • Can I install windows 7 on a second internal drive on a macbook pro 2011?

    Can I install windows 7 on a second internal drive on a macbook pro 2011? I have 2 500 gb. SSD drives in my 2011 MacBook Pro. My plan was to install windows 7 on the 2nd drive. I'm new at owning Macs so I have had Windows on main drive using bootcamp but I wanted to speed up my 17" Mac so I maxed out the memory and added the SSD drives.  Thinking I could put the 2 operating systems on seperate drives I bought to 2 SSD's. Is there any way to do this.  So far I have drawn a blank. Any ideas?

    Yes. Just install Windows onto it without using the Boot Camp Assistant to partition it.
    (124769)

  • Clean Install / Cloning to an second internal drive?

    My boot drive is full and now seems slower - is it file fragmentation which slows a full drive?
    Here's my set up - I've just added a second internal 1TB drive and want to clean install the original boot drive (350gb) which is almost full and seems to have slowed down. - What is the best way to do this?
    Can i clone to a second internal drive?
    Can i clone drive 1 onto drive 2 then clean install drive 1?
    I want to keep a back up of system set up, software preferences etc.. so nothing goes wrong
    Can i then use Migration Assistant to get everything back in place on drive 1 (software preferences etc..)
    Then drop the folders in from drive 2 into 1 - then erase drive 2 to start fresh
    (I'm running OS 10.5.8)
    Thanks for any help

    Hi
    Yes you can use it as a regular drive. Store Data or even install the OS.
    RAID 0 = Stripe. As an example 2x1TB drives striped will give you a single volume 2TB in capacity or thereabouts. RAID 0 gives you capacity and performance with no redundancy. If one of the drives fails you lose everything. Data is 'striped' across both drives. One drive does not get 'filled' up first before data is stored on the second drive.
    It's important therefore with a RAID Stripe to have a clear and well-thought out backup strategy if you want to protect your data.
    RAID 1 = Mirror. As an example 2x1TB mirrored would give you a single volume 1TB or thereabouts in size. RAID 1 gives you redundancy at the cost of capacity and performance. If the primary mirror fails the data is still on the secondary mirror allowing you time to replace the failed mirror. Data would then be 'mirrored/copied' again onto the replacement drive. Depending how much data you have this can take some time. Performance does suffer whilst this happening.
    Depending on your hardware and how far you want to take this there is a whole world of RAID waiting for you to explore. If you had a MacPro for example you could use 4x1TB drives and have a RAID 10. A Mirror of a Stripe or - if you like - a Stripe of a Mirror. Either way you end up with a 2TB Volume giving you some measure of performance with redundancy. Beyond what's available built-in you're really looking at hardware RAID solutions. These can offer RAID 5 and RAID 6 with variations thereof. For example RAID 5 with hot spare etc or RAID 3 or even RAID 50 and so on.
    The 'general rule' leaving 10% free if anything should be expanded to 15% if you're considering RAID. Performance degrades alarmingly once you get beyond that figure even more than un-RAIDed volumes.
    HTH?
    Tony

  • Putting OSX on Second Internal Drive Macbook Pro

    I am curious and hopefully somoene who has a bit more knowledge on this can help me out,
    so I have 2 internal drives on my Macbook pro a SSD in the main bay and a 750 GB HHD in the superdrive bay - so boot camp still dosen't ( to my knowledge) allow a windows partition to be put onto the second internal drive where i have a ton of space..
    so,
    my thought on this is - would it be possible to have a very small osx partiton on the SSD to do bootcamp and ect so that then windows bootcamp would get most of the space on the SSD which is in the main bay and then partiton or fully install OSX again on the second internal drive and use that for my main drive for apple stuff and use the SSD for boot camp ( Windows 7 )
    Would this be a good idea to do? Or would it potentially cause a lot of problems later on?
    I haven't read yet about anyone trying this so thought i'd see what the more experienced apple people know / thought.
    Thank you for your time!
    Vanessa

    It doesn't matter what you originally format it, the Boot Camp Assistant will reformat it as FAT32. When you begin to install Windows you'll need to reformat it to make it bootable, and of course, since the drive will be larger than 32gb Windows will insist on formatting it as NTFS.
    You can't make a partition on the second drive if you want to go that route. Boot Camp will need to use the entire drive if you don't want to install it to the Boot Partition.
    Also, the drive will need to not be part of any RAID you have installed.

  • How can I make the second internal drive bootable drive bootable for trouble shooting?

    I suspect that a newly installed SSD boot drive may be causing instability in my new 2012 Mac Mini Server. The logic board and RAM have been replaced and boot drive wiped and partitioned and 10.10.2 reinstalled. I'd like to make the second drive bootable in order to take the SSD boot drive out of the equation.
    Could some please describe the correct method for making the second internal drive bootable.
    Thanks.

    A quick addendum: your Mac will have a default boot drive set, and if not then it will choose the first one it identifies on the disk (usually the first partition on the first disk, followed by subsequent partitions on this disk, and then moving to the second identified disk, etc.). As a result, if you have to hold Option to select your second boot drive, the next time you restart, your Mac will boot back to the first drive. To make the second boot drive the default one, you will need to select it in the Startup Disk system preferences. This will update the hardware to use this as the default boot drive.

  • I ejected second internal drive accidentally - how do I find it?

    I am on a mac pro running osx.5.8 and have a second internal drive that is set up as my time machine backup. I accidentally ejected it, and can't find it. Doesn't show up in Disk doctor either. Do I reboot a certain way?

    Hi
    http://www.prosofteng.com/products/data_rescue.php
    Download this trail Software , and install it.
    open the Software and See if you are able to detect it from the Disk rescue
    _*2nd option*_
    http://www.alsoft.com/diskwarrior/
    have a look on this web site
    good luck

  • How to use FileVault on second internal drive with user-folder?!

    Hi there,
    I've a problem that has not solved yet.
    My MBP early 2011 with OS X Lion 10.7.5 has instead the SuperDrive two internal harddiskdrives:
    The "System"-Drive (128 GB SSD) for nothing else than the MacOSX installation/applications, and the "User"-Drive (500 GB classic HDD) for all my data and my user-folder. (Yes, I moved it via Terminal commands from "System" to "User").
    All works fine, but I am only allowed to encrypt the "System"-Drive via FileVault2. The "User"-Drive is not supported by FileVault2.
    I tried to encrypt it with the Terminal commands:
    diskutil cs convert /Volumes/WD-Blue -passphrase
    (Note: "WD-Blue" is the name of the "User"-Drive)
    After confirming the new passphrase, it should be encrypting my "User"-Drive. In the HardDiskDrive-Utility is this hdd converted into a "Mac OS Extended (Journaled, encrypted)". So far, so good
    But, now the big problem:
    After rebooting the MBP, it is not possible to login.
    "An error has occured with this user" (or similar)
    I have to reboot, hold CMD+R, and deselect in the HDD-Utility the HDD-Protection, and decrypt this drive with the known passphrase.
    After this "correction", all works fine, but without the encryption...
    So... any ideas, how to protect the second hdd with my user-folder, without losing my data, because I think, when the second one has been deleted and the new format is "Mac OS Extended (Journaled, encrypted)", it won't solve my problem, because my user-folder is not on the "System"-Drive.
    Thank you, and sorry for my english
    Regards.

    Hi there,
    I solved my problem by inform myself...
    Here is the solution to encrypt the second internal drive, without losing data, if your user-folder is on the second one (and not on SYSTEM). I will type "WD-Blue" in this example. You have to type in your drivename, that you want to encrypt.
    Please note, that modifying your system this way is at your own risk!
    Add new user in the ucp with admin-permissions
    logout your user
    login as new user (admin)
    be sure, that no file on the second drive is in use
    open terminal
    type diskutil list to see your drives
    type diskutil cs convert /Volumes/WD-Blue -passphrase YOURPASSWORD
    Terminal should encrypt your drive. To check the status type diskutil cs list
    If the amount of bytes the same, the drive has been encrypted
    So, now still use terminal and type (after encryption has been accomplished):
    curl https://raw.github.com/jridgewell/Unlock/master/install.sh | bash
    Follow the promts and enter your given password for the encrypted drive (i.e. for "WD-Blue")
    Exit terminal and reboot
    Done
    This way works fine. My user-folder is still on WD-Blue (2nd Drive) and the hdd is encrypted without losing my files.
    Regards,
    Marc.
    List of references:
    Encryption without formatting:
    http://www.macworld.com/article/1162999/complete_guide_to_filevault_2_in_lion.ht ml?page=2
    Mount second encrypted drive while boot-sequence:
    https://github.com/jridgewell/Unlock
    Please note, that modifying your system this way is at your own risk!

  • Moving iTunes Media folder to second internal drive fails

    The whole story is:
    I never really used the iTunes media folder system. All my music is on extrenal drive and I was only importing it into iTunes manually to keep my own folder system, for example once a week Ive created a folder with a date of creating and there I had all the releases from that week (some in their own folder or separately but all in this one folder named by a dat eof creation). So on my ext. drive I have lots of these folders by date. And the names of folder always correspond with the date added to iTunes as well
    My ext. drive is full now. so Ive decided to take a next step and put out the dvd-rom and put another internal drive (1TB) into my macbook pro which will be used for music and movie data only (the system stays on the old one).
    What I want to do now is somehow move all these music folder to my new internal drive, so they can be accessed from iTunes without reseting all its features.
    Ive read that one solution can be creating the new iTunes Media folder on that new drive and Consolidate all music from iTunes to this location. Problem is I cant even try it, because when go to iTunes Preferences to change the location of Media folder a hit Create after selectin the new location (new internal drive) after fee seconds the progress freezes and Activity Monitor says that iTunes are not responding. Ive tried to leave it for about half an hour and no changes, even tho theres not much to copy/move cause the Media folder has no music in it, only playlists etc.
    So question number one is - why its freezing?
    Question number two - any other way to trasfer all my collection and keep its organiation as it is without loosing the iTunes list and be able to use it after transfer?
    Thanks in advance for your help and tips

    Not sure about question 1...
    What I think you should do is try to copy the existing iTunes library folder from <User's Music>/iTunes to <1Tb Drive>/iTunes then hold down option as you start iTunes. You should be asked to choose or create a library. Click choose and browse to the library file at <1Tb Drive>/iTunes/iTunes Library.itl (BTW if the the .itl extension is missing you should probably add it match the current format, but it will work either way).
    The new copy of the library should work just as before, but check a few random things first, you can always revert to the previous library with option-start-iTunes if it doesn't work.
    Under iTunes > Library > Orgainze Library if the option is available tick Reorganize files in the folder <Media Folder>. This will make sure the new version of your library is as portable as possible. Next under preferences > Advanced make sure that the media folder is given as <1Tb Drive>/iTunes/iTunes Media. If needed you can change this value. If you change the folder at this point iTunes should offer to copy your existing media into this new location. That ought to work, thought it will take some time. Alternatively you decline the offer and then selectively consolidate the library in batches, e.g. by selecting the tracks of all Artists beginning with A, and consolidating just those tracks, then repeasting with, B, C etc. followed by other types of media. If iTunes didn't prompt, or the folder was already correct, you can decide whether to try in batches or use iTunes > Library > Organize Library > Consolidate files.
    tt2

  • Adding a second internal HDD on a Satellite A350-20s

    I have a Satellite A350-20s.
    It is described in its documentation as having the option to add a second internal 2"5 hdd, and a indeed there is a place reserved for it..
    The problem is that when I remove the cover to insert the hdd there is no connector.
    So, how to do it ?

    Hi buddy,
    Well, I have even checked the manual of my Satellite A350 and there you can see that the manual shows second HDD slot. But as Paolo30 wrote installing such a HDD is depending on the HDD controller You can only install such a HDD if you have a second HDD connector.
    In my opinion all its ok because the manual doesnt mention that adding a second HDD is possible on every notebook. ;)
    By the way: If you need more disk space you can use an external HDD, for example 2.5 one. Such HDDs dont need an additional power supply, you need only an USB cable to connect it. ;)

  • HP Envy DV7 7332ea not recognising second internal drive

    I recently bought this laptop and the first thing I did was swap the 1tb hard drive for a 240gb Samsung 840 SSD drive. The performance increase was astonishing and I'm very happy with it.
    Because the SSD is considerably smaller than the original hard disk, I decided to add another SSD drive (120gb) into the second bay. I ordered the mounting kit and cable and installed the drive.
    When I boot the laptop up, all works well but it refused to acknowledge that the second 120gb drive was installed. It does not display in disk management or device management etc.
    If I connect it via usb the drive shows up - I'm able to partition and format it fine - but whenever its connected in the second bay it just won't appear.
    I tried connecting the original 1tb drive via usb and again that shows up ok. Once I put that in the second bay, it doesn't show up either.
    Next, I disconnected the primary 240gb drive (in bay 1) and started the laptop up using the original 1tb hard disk which was in the second drive bay but which is now connected to the main 'socket' which the 240gb primary ssd has been using. It booted up and worked fine.
    I then unplugged it from the main socket and plugged it into the secondary socket (which drive two is supposed to connect to). It also booted up and worked fine.
    So, I know that:
    (a) both the original 1tb hard disk and the new 120gb SSD drive are working.
    (b) both the primary and secondary 'sockets' for the drive cables are working.
    (c) as soon as I connect any second drive via the secondary socket, once the machine has booted up via the primary socket, no drive is recognised at all. I can't select to partition it, reformat it etc since there is nothing showing it as connected but not available. It just isn't there.
    I can't think of anything else I can try to get it working; does anyone have any suggestions as to what I can do to get the second drive at least recognised by the system?
    Specs are: Windows 8, HP ENVY dv7-7332ea Notebook PC (D0X36EA), 16bg Ram, Samsung 840 SSD drive (240gb) being used as the boot drive, Samsung 840 (120gb) drive the one which is being installed as a second drive).
    All latest drivers for the Samsung drives installed etc.
    Any help would be appreciated!

    thedoglett wrote:
    I recently bought this laptop and the first thing I did was swap the 1tb hard drive for a 240gb Samsung 840 SSD drive. The performance increase was astonishing and I'm very happy with it.
    Because the SSD is considerably smaller than the original hard disk, I decided to add another SSD drive (120gb) into the second bay. I ordered the mounting kit and cable and installed the drive.
    When I boot the laptop up, all works well but it refused to acknowledge that the second 120gb drive was installed. It does not display in disk management or device management etc.
    If I connect it via usb the drive shows up - I'm able to partition and format it fine - but whenever its connected in the second bay it just won't appear.
    I tried connecting the original 1tb drive via usb and again that shows up ok. Once I put that in the second bay, it doesn't show up either.
    Next, I disconnected the primary 240gb drive (in bay 1) and started the laptop up using the original 1tb hard disk which was in the second drive bay but which is now connected to the main 'socket' which the 240gb primary ssd has been using. It booted up and worked fine.
    I then unplugged it from the main socket and plugged it into the secondary socket (which drive two is supposed to connect to). It also booted up and worked fine.
    So, I know that:
    (a) both the original 1tb hard disk and the new 120gb SSD drive are working.
    (b) both the primary and secondary 'sockets' for the drive cables are working.
    (c) as soon as I connect any second drive via the secondary socket, once the machine has booted up via the primary socket, no drive is recognised at all. I can't select to partition it, reformat it etc since there is nothing showing it as connected but not available. It just isn't there.
    I can't think of anything else I can try to get it working; does anyone have any suggestions as to what I can do to get the second drive at least recognised by the system?
    Specs are: Windows 8, HP ENVY dv7-7332ea Notebook PC (D0X36EA), 16bg Ram, Samsung 840 SSD drive (240gb) being used as the boot drive, Samsung 840 (120gb) drive the one which is being installed as a second drive).
    All latest drivers for the Samsung drives installed etc.
    Any help would be appreciated!
    Hi,
    There is no need for two solid state drives on a laptop. I suggest to have the Samsung PRO 240GB as the primary drive and the original 1TB HDD as a data storage in the secondary hdd compartment. The thing is that you need a fast system which is the SSD but data (multimedia, work, anything) is better to store on a common hard drive.
    The other problem with not recognizing a drive in the secondary bay might be related to an issue when the secondary drive has to be added to the system. It means that you will have to delete/format the drive you want to use as the secondary drive with the Samsung and add it to the system using this:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02489518
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • HP ENVY TouchSmart m7t-j000 Notebook PC - Adding a second hard drive

    Product Number:  E4S80AV
    I'm having a hard time finding a SATA III cable and caddy for a second hard drive for my laptop.  Any ideas?  Right now, I just have an extra 1.8 inch drive I can't use.
    Robert

    Please see HP ENVY Notebook HP ENVY TouchSmart Notebook HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook P... for a complete list of parts used in these models. Additionally the MSG states;
    Hard drives
    Supports 6.35-cm (2.5-in) hard drives in 9.5-mm (.37-in) and 7.0-mm (.28-in) thicknesses (all hard drives use the same bracket)
    Customer-accessible
    Serial ATA
    Supports the following hard drives:
    ● 1-TB 5400-rpm, 9.5-mm
    ● 750-GB 5400-rpm 9.5-mm
    ● 500-GB 5400-rpm 9.5-mm and 7.0-mm
     Dual hard-drive configurations:
    ● 2TB: (1-TB 5400-rpm x 2)
    ● 1500GB: (750-GB 5400-rpm x 2)
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How do I install a snow Leopard on a second internal drive

    I just installed a 2nd internal drive on my MacPro (1,1). I have Snow Leopard (SL) already installed and running on my primary boot drive that works well.
    I am looking to make the second drive a mavericks boot drive so I can switch back and forth between SL and Mavericks. I understand I must install SL before moving up to mavericks.
    Problem is the SL install DVD does not offer me an option to select a drive other than the startup drive (original drive) to install the software.
    The 2nd drive is formatted Mac OS Journaled, 1 partition using GUID. I did this using Disk Utility.
    Any Ideas on how I can get SL installed so I can move up to Mavericks?
    Side note: I have to keep Snow Leopard as an option because some of my software will not run under Mavericks

    I tried to install Mavericks with a USB drive. I started up holding the option key using the boot manager, selected the USB drive, the boot manager froze, then booted to my original snow leopard drive. I'm thinking of using my laptop to put my MacPro into Target Disk Mode to see what happens.

  • Pre Purchase Question: Adding a second hard drive on a DV4t

    I'm really interested in the DV4T and I was customizing online but can't seem to find any option to add or even where to purchase an internal second hard drive for the SmartBay. Could someone help,  Thanks in advance.

    futurewave27 wrote:
    I'm really interested in the DV4T and I was customizing online but can't seem to find any option to add or even where to purchase an internal second hard drive for the SmartBay. Could someone help,  Thanks in advance.
     The dv4 series only has 1 hard drive bay, you cannot install a second drive.  If you want to have more than one hard drive, try the dv7 series

Maybe you are looking for