Adding a Serial ATA Drive from old windows machine?

Hi,
I have recently bought a new Mac Pro, to complete my conversion from Windows to Mac. However, in my old Windows machine, I have a 120GB Serial ATA hard drive.
I believe that I wouldn't be able to simply put this 120GB drive into my Mac Pro, as it is in NTFS format, which Mac cannot understand. I think that it has to be in FAT32 format, correct? So, if I was to re-format this serial ATA drive into FAT32, would it be able to work in my machine? Or are there more compatibility issues I might face? (Make, Model, Age issues?). I assume most SATA drives are similar, and that it should work, but I thought I should probably check before attempting it!
Thanks,
Steve

Any SATA drive can be installed in the Mac Pro. OS X can read an NTFS drive but it cannot write to it. However, if you just want to use the drive with OS X then you should repartition and reformat the drive for OS X:
Extended Hard Drive Preparation
1. Open Disk Utility in the Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button and set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

Similar Messages

  • How do i combine iTunes libraries ? from old Windows machine to my Mac?

    Hi there...I have an expiring Windows machine where my kids first sync'd their iPods....That machine is dying and i want to bring those songs (hundreds!) to my Mac computer....But I already have lots of music on my Mac....every time my kids have tried connecting their iPods to the Mac it tells them that it will erase their music and install the music I have on the Mac....So...is there a way for me to add the music from the Windows machine to my Mac library? Or...since they each have an account on the Mac...can each account have its own iTunes where they could bring in their music? that way they could at least save the songs they have in their iPods. i know the music will not be transferred from the iPod to the Mac but I have backup diskettes I made on the windows machine. Can i use those? I am hoping I do not lose all that music ($$$)

    Click here and follow the instructions.
    (43015)

  • How do I delete itunes library and move library from old windows machine to

    My daughter bought a new macbook and would like to move her itunes library from the windows machine to the mac. I copied it to the mac and moved the existing itunes folder to the trash. By the way, she got 3 free downloads from Apple and they were in the library I moved to the trash bin. I then moved the backup folder to the location of the itunes folder I had deleted. When I open itunes, it sees the 3 songs in the deleted folder. How do I get itunes to recognoze the new itunes folder?

    Thank you. As I understand it, if the original iTunes folder had never been populated, we would have been able to move the library exported from Windows into iTunes and preserve the playlists. Because my daughter downloaded 3 songs she does not even like, we have no way of preserving playlists? There must be some way to remove all connections to the first library. Is it possible remove the iTunes application and then either re-install it from the original disks or else download it. I know you can download iTunes for Windows, not sure if it is there for Macs. My guess is that if she starts itunes from scratch, there would be no references to the intial DB and we could then move in the folder from Windows without a problem.

  • Delete files from an External Serial ATA Drive

    I have an external Serial ATA drive with a windows operating system connected to my macbook pro by a usb adapter. I'm trying to delete some files from the drive but it tells me it is read only. How do I change the sharing and permissions?

    You can't write/make changes to an NTFS formatted drive using a Mac without third party software.
    Search Google for "Mac NTFS"

  • Nu B Question - Serial ATA Drive Question

    Nu B Question 1
    The only HD I have on the system is a Seagate 80gb
    Serial ATA. I've have it on sata 3 (Promise Controller) is this correct or should it be on sata 1/2/4.
    Kim
    System:
    Ritmo 500w Case
    Intel Pentium 4 (2.40c) (Boxed with Fan)
    Kingston Ram (2x) 256MB 333mhz DDR PC2700 (Total 512MB)
    MSI 865PE Neo2-FIS2R
    LeadTek Winfast A280LE TDH VIVO (128MB DDR - Nvidia GeForce4 Ti4200 GPU with AGP 8X)
    Seagate Barracuda 7200.7 (80GB) Serial ATA (Drive Formated NTFS)
    Windows 2000 Professional
    Sony FD
    LiteOn 12x10x32
    Viewmaster Optical Mouse

    My startup times are much faster with my 7200 RPM drive. But I would agree with Kappy, decide how much HD space you need.

  • Is it possible to upgrade from 500GB Serial ATA Drive @ 5400 rpm to ssd on the new 13" 2012 macbook pro?

    is it possible to upgrade from 500GB Serial ATA Drive @ 5400 rpm to ssd on the new 13" 2012 macbook pro?

    New non-retina 15" MBP, I just replaced the 500 gb HD with a Samsung 830 256 gb SSD from Amazon, $255 for the kit (includes a USB cable).  Wow.  What a difference.  Yes, there was a learning curve for some of it, but was so worth it.  Let me know if I can help.  I'm using the 500 gb in 2 partitions - one for a clone of the SSD, and one for Time Machine.

  • If I have my old hard drive from my windows laptop, can I use that as a partition?

    i was wondering since i recently upgraded to a mac, if i could use my old hard drive from my windows laptop, with a usb connection, if i could use that as a windows partition for gaming and other things of that nature that are only support windows.

    If you mean that you want to run Windows from a USB
    drive, you can't.  Windows itself can only boot from
    internal drives.  This is a limitation of Windows.

  • Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?  The info seems to say that it's as easy as plugging the new drive into a drive slot?

    I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?  The info seems to say that it's as easy as plugging the new drive into a drive slot?

    shldr2thewheel wrote:
    Fmaharg wrote:
    I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?
           Yes
    Fmaharg wrote:
    The info seems to say that it's as easy as plugging the new drive into a drive slot?
           It's easy, but not that easy.  You need to copy all the info from the drive currently in the mac to the new  one before you install the new SSD.  You can do          this by downloading cloning software (I use CarbonCopyCloner because it's free)
    Not to be picky but CCC is donationware, if you use it because of its quality you should send a little bit of money in appreciation, and as a bonus you get to turn the banner off.

  • 750GB Serial ATA Drive @ 5400 rpm or 128GB Solid State Drive?

    Ok so im probably going to get the MacBook Pro 15 inch non retina 2.6 GhZ. it comes with 750 GB Serial ATA Drive and im trying to see if it is worth upgrading to the SSD im going to be using it for a lot of video editing (Final Cut Pro/YouTube) as well as streaming videos and using it for class work give me your opinions on what you think would be best to get if im using it for this thanks! (also ahould i upgrade to 2.7 GhZ.??)

    I agree with Bimmer 7 Series.  I did the same SSD update of the 2.5" Hard Drive.  i went from a 750GB 5400 RPM to a 512 GB SSD and used the 750 for additional storage (put in a chassis) and a 4x improvement on performance on the SSD vs. the typical HD. 
    Boot time went from 50seconds to 10 seconds.
    Loading Parallels 7 load of Windows XP Pro was 1:33 minutes to 40 seconds.
    Excel 2010 load time was 25 seconds, now 7 seconds
    iMovie with 40 minute move added to edit/preview- 40 seconds, now 14 seconds.
    These are just a few examples. I have the 2012 13 MBP (2.8Ghz 8GB RAM).

  • Bad Serial ATA Drives?

    I've got a Daul 2.5ghz G5 that's really had a lot of problems since I bought it. The graphics card has been replaced, the motherboard has been replaced, and both processors have been replaced.
    The other day, I noticed that rendering in Final Cut Pro 5 was just crawling.
    Processor intensive tasks seem to go fine, but tasks that involve writing to the disks (both of the 250 serial-ata drives) go very slowly.
    Computer is, of course, out of warranty now.
    I wipped the computer and started from scratch and reformated both drives, same problem. Disks are not fragmented.
    I ran Xbench. All computer tests scored above the 100 point baseline, except the drive tests:
    Disk Test 71.27
    Sequential 104.09
    Uncached Write 109.13 67.00 MB/sec [4K blocks]
    Uncached Write 100.96 57.13 MB/sec [256K blocks]
    Uncached Read 99.81 29.21 MB/sec [4K blocks]
    Uncached Read 107.04 53.80 MB/sec [256K blocks]
    Random 54.19
    Uncached Write 20.81 2.20 MB/sec [4K blocks]
    Uncached Write 131.48 42.09 MB/sec [256K blocks]
    Uncached Read 93.06 0.66 MB/sec [4K blocks]
    Uncached Read 134.96 25.04 MB/sec [256K blocks]
    Both drives scored really low on the random uncached write speed. Any ideas on what the problem would be? Could both drives go bad at the same time? Hard drive controller? Is there a way to test it without buying a new drive?
    Russ
    Dual 2.5ghz G5   Mac OS X (10.4.3)  

    What make/model of drives? how old are they?
    Hitachi 7K500 might fit the bill. Or 10K Raptor (but probably need SeriTek controller now, a must for the 150GB model and now the 74GB - both are excellent for boot drive). The 500GB 16MB cache Hitachi is also a solid drive.
    Disk Utility: Erase: Options: Zero-all is what I would do first.
    I try to keep one drive's outer track partition (100GB) just for OS / Apps (and use the 2nd parition for static archive and backups).
    Then use Drive #2 for data / media / Users.
    Maybe extra (external0 eSATA drives for FCP, scratch, backup and projects.
    Some drives, SATA is going through a lot of changes, are trouble, not compatible, have SSC enabled, firmware doesn't support RAID as well as it could/should. NCQ being enabled doesn't help desktop use and isn't supported on G5 SATA ports.
    Xbench is not the most 'reliable' test, but those are not normal numbers.
    Keep your disk drive in "good health" (run Disk Utility, Disc Warrior etc from a cloned emergency drive regularly to do any repairs) as well as keep log and temp files to a minimum? run cron tasks at least weekly?

  • 750gb serial ATA drive vs. 128gb SSD

    Hey I'm looking to buy a 13 in. macbook pro and I don't know the difference between the 750gb serial ATA drive and the SSD. I know the SSD will make the computer operate faster, but that's pretty much it. Any information on these two would be greatly appreciated.

    I was in the same position a month ago. Its basically a pro and con list.
    SDD is much more expensive, to upgrade from a 500gb HDD to a 512GB SSD is $1000 dollars!!!
    SDD is more energy efficient, so you will get about an extra half hour of battery life(on average). It is faster to load from, and it has no moving parts so is supposed to be have longer life.
    I however went with a 750GB 7200rpm HDD as I didn't want to worry about running out of space. I use a lot of photos and videos and I didn't want to have to worry about bringing external hard drives around with me.
    Right now I don't think the SSD is necessary for your average person. My 15" is flying with my HDD and I am very happy with my choice!
    Hope this helps

  • How to install a Serial ATA Drive?

    Hello, I just purchased a Barracuda Serial ATA drive and I just found out that these aren't installed as P ATA drives.
    I've tried several combinations on my award BIOS and still I have absolutlly no sign of the SATA drive's presence.
    This was the  Beginning of the discussion.
    I have no ideia what to do. I've heard of the F6 tecnique but I don't no have a disk drive nor am I installing windows XP. I believe that my controler is called ICH5 or 82801EB since these where the types of refence I've heard before and I checked my devices on Device Manager.
    P.S I'm using windows XP

    You don't need to install drivers.
    In bios under Integrated Peripherals, On Chip ATA Operating Mode set
    Native Mode
    ATA Configuration - PATA only
    SATA Keep enabled - yes
    PATA Keep enabled - yes
    PATA channel selection - both
    If this doesn't let you boot, change to
    ATA Configuration - SATA only
    After making/saving these changes you should go back into the bios on the first reboot and make sure the right boot drive is selected.

  • Replacing a Serial ATA Drive with a SSD HD

    Does anyone know if its difficult to replace a Serial ATA Drive with a SSD? And if possible and not difficult, which specs should this SSD have?

    if you buy your SSD as a kit, it comes with sata to usb connector.
    if you buy your SSD as a bare drive then go out and buy an usb external enclosure.
    Before you install your new drive, turn your computer on with your old drive, hook up your new drive via external enclosure to your usb port.
    Launch Disk Utility, erase/format your new drive with MAC OS Extended Journaled.
    Open Carbon Copy ( free download if you don't have it) and start to clone your drive, a pop up will come up saying you haven't created a recovery partition, follow the instructions in Carbon Copy then proceed to clone your drive after.
    Once that's done, open the back of your MB, take out the old drive, install your new ssd, then turn it on.  You're back in business.
    As for your old drive, put it in the external enclosure and use it as a back up drive.

  • 1TB Serial ATA Drive vs 512GB SSD

    what is the major differences between 1TB Serial ATA Drive and 512GB SSD when chooseing your mac book pro,because i dont understand why you have to pay more money for less memory,can anyone explain as im going to purchase 1 in the next week and $900 is alot of money...

    Yes - but as mende1 points out, it would be much less expensive to go ahead and buy the 1TB unit, put your own 512GB SSD in it (around $400), and buy an enclosure for your 'old' 1TB HD to use for backup purposes.
    But an SSD is much, much faster than a spinning platter hard disk drive.
    Clinton

  • 1TB Serial ATA Drive + 256GB Solid State Drive

    Hi,
    How do I confuger my iMac if I select the "1TB Serial ATA Drive + 256GB Solid State Drive"?
    Thanks.
    Ed

    Hi Ed,
    Your new iMac will come with OSX Lion.
    What you want to achieve is to have all your user accounts on the hard drive and your OS and Applications on the SSD.
    The way to go about this is to create your User Account/s on the SSD. (Do not migrate your data at this point).
    You will need to create a temporary User Account that you can login with, so that you can either replace or create the User Account that you want to migrate from your MacBook Pro.
    Now, clone your SSD to the hard drive using Carbon Copy Cloner or SuperDuper!. (Migration Assistant will not migrate data to a HD without a System folder, I believe).
    Bootup from the SSD, change the path to your User Account/s in System Preferences>Advanced Options. Reboot and then migrate your User Account, Applications and Settings from your MacBook Pro using Migration Assistant.
    That is the configuration I have working on my MacBook Pro with dual drives, an SSD and HD.
    Good luck.
    Sam

Maybe you are looking for