Adding a system to Solution in Maintenance Optimizer

Dear All,
We have installed two NW systems. One is based upon NW 7.0 EHP 2 and the other is based on NW 7.4 SR1. On both of these, we intend to install Duet Enterprise 2.0 add-ons. I have been asked to calculate the SP stack for both NW releases. Based on my limited knowledge of Solution Manager, I have created a solution "Duet Enterprise" and added both systems info in SMSY (server, database etc.). Now, when I create a maintenance transaction in MOPZ, I am unable to see any system in product version in the operations tab as compared to another solution which shows a system SPR (please see attached screenshots).
Please advise the steps through which I can add a system so that it shows in the Duet Solution.
Greatly appreciate any help provided.
Kind regards,
Amer.

Hi Amer
Have you checked below links
Maintenance Optimizer - Solution Manager - SCN Wiki
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
make sure you have lmdb entries properly reflected for these systems and above links gives more insights for mopz.
Thanks
Prakhar

Similar Messages

Solution manager "Maintenance Optimizer" System Logical Component

Hello friends!
I have some troubles with my Solution Manager!
After SPS17 installation I don't see any system in SOLUTION_MANAGER transaction.
Steps for reconstructions:
1) start tcode SOLUTION_MANAGER
2) select my solution from list (the same like in tcode dswp)
3) goto Change Management --> Support Package Stacks --> Maintenance Optimizer
4) chose product version SAP ERP 6.0 (it is assigned to my solution)
5) in appears grid I don't see system (see below)
I----II--
I
I_V_I_System_I_Logical Component_I
Before installation I can select my solution. Now it's not critical because I can confirm downloads...

Hi Luke!
I didn't solve this problem...
But I've only one system in my solution, and, as I understand, it may not be showed. But I may be wrong...

Local logical system is not defined-Maintenance Optimizer Config

Hi,
When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
But I have created a Logical client using SCC4.
And the other thing is for this created client, does not have any users on this client, If I run,
SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
Answer is "no rows selected"
So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
Thank you!

First of all, 'Logical System' and 'Logical Client' are two different things.
For Client Problem:
You did create a client in SCC4.
1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
For MOpz issue:
Could you please search in sap marketplace for any particular note specific to MOpz ?

Solution manager maintenance optimizer

Hi all,
I have what I think is an issue, and hoping someone could possibly point me in the direction to correct. I have setup our solution manager system and trying to get the maintenance optimizer option working fully. I have a java system that I pull the information from SLD perfectly fine, and it lists all installed software components via SMSY>SYSTEMS perfectly. I have assigned logical components etc. I can create a new maintenance optimizer transaction, select the proper system with assigned components, but when it lists the files to be downloaded automatically I expect to see alot more files available for download than it lists for me. I assume I am missing something, but not sure where to look.
Would anyone be able to possibly point me in the right direction on what I might be missing?
Regards,
Chris

Hi Markus,
The system is SAP EHP1 for SAP Netweaver 7.0. It has the following components installed and specified in logical components:
Adobe Document services
Application server Java
EP Core
Enterprise Portal
Along with the kernel files I also get the following files available for download via maintenance optimizer (6 in total)
FORUMS06_0-10005892.SCA SP06 for FORUMS 7.01
BP_PROJ_PORT_DESIGNCOLL
BPPPMDC17_0-10003174.SCA BP PROJ., PORT. & DCOL. 4.0 SP17
BP ERP05 PROJ SELF-SERV
BPERP5PSS17_0-10003284.SCA BP ERP05 PROJ SELF-SERV 1.0 Support Package 17
BP ERP05 MAINTENANCE TECH
BPERP5MTC07_0-10004455.SCA SP07 for BP ERP05 MAINTENANCE TECH 1.2
BP ERP SITE TECHNICIAN
BPIS7TST07_0-10004458.SCA SP07 for BP ERP SITE TECHNICIAN 1.20
BP ERP ICM ANALYST
BPIS7ICMAL06_0-10006119.SCA SP06 for BP ERP ICM ANALYST 1.41
When I look at installed system components via SMSY it correctly shows everything installed which includes:
ADOBE DOCUMENT SERVICES 7.01 0006 SP006 ADOBE DOCUMENT SERVICES 7.00
BI BASE SERVICES 7.01 0006 SP006 BI BASE SERVICES 7.01
BI INFORM. BROADCASTING 7.01 0006 SP006 BI INFORM. BROADCASTING 7.00
BI META MODEL REPOSITORY 7.01 0006 SP006 BI META MODEL REPOSITORY 7.01
BI REPORTING AND PLANNING 7.01 0006 SP006 BI REPORTING AND PLANNING 7.01
BI UNIVERSAL DATA INTEGRATION 7.01 0006 SP006 BI UNIVERSAL DATA INTEGRATION BI UDI 7.01
BI WEB APPLICATIONS 7.01 0006 SP006 BI WEB APPLICATIONS 7.00
BI WEBDYNPRO ALV 7.01 0006 SP006 BI WEBDYNPRO ALV 7.01
BP ERP FIN MDM 1.40 0006 SP006 BP for Financial MDM 1.40
BP ERP HR EIC 1.40 0006 SP006 BP für HR Employee Interaction Center 1.40
BP ERP ICM ANALYST 1.41 0004 SP004 BP for ICM-Analyst 1.41
BP ERP RECRUITER 1.40 0006 SP006 BP for Recruiter 1.40
BP ERP RECRUITING ADMIN 1.40 0006 SP006 BP for E-Recruiting Administrator 1.40
BP ERP SITE TECHNICIAN 1.20 0006 SP006 BP for Site Technician (Telecommunications) 1.20
BP ERP UT XSS 1.40 0006 SP006 BP ERP UT Definition für Self Service BP 1.40
BP ERP05 BUS UNIT ANALYST 20 1.0 0017 SP017 BP for Business Unit Analyst (mySAP ERP) 1.0
BP ERP05 COMMON PARTS 1.41 0006 SP006 BP ERP05 COMMON PARTS 1.41
BP ERP05 ESS 1.41 0006 SP006 BP for Employee Self-Service 1.41
BP ERP05 HR ADMINISTRATOR 1.41 0006 SP006 BP for HR Administrator (mySAP ERP) 1.41
BP ERP05 MAINTENANCE TECH 1.2 0006 SP006 BP for Maintenance Technician 1.2
BP ERP05 MSS 1.41 0006 SP006 BP for Manager Self-Service 1.41
BP ERP05 PROJ SELF-SERV 1.0 0016 SP016 BP for Project Self-Service (mySAP ERP) 1.0
BP ERP05 SELF-SERV ADMIN 1.0 0017 SP017 BP for Self-Service Administrator (my SAP ERP) 1.0
BP ERP05 TALENT DEV 1.01 0010 SP010 BP for Talent Development Specialist 1.01
BP_PROJ_PORT_DESIGNCOLL 4.0 0015 SP015 BP for Project Portfolio Management and Design Collaboration 4.0
CAF EU 7.01 0006 SP006 SAP Net Weaver End User 7.01
DI BUILD TOOL 7.01 0000 SAP BUILD TOOL 7.01
DI CHANGE MANAGEMENT SERVER 7.01 0006 SP006 CHANGE MANAGEMENT SERVER and SXMAN 7.00 701
DI COMPONENT BUILD SERVER 7.01 0006 SP006 COMPONENT BUILD SERVER 7.01
DI DESIGN TIME REPOSITORY 7.01 0006 SP006 DESIGN TIME REPOSITORY 7.01
FORUMS 7.01 0005 SP005 FORUMS 7.01
J2EE ENGINE BASE TABLES 7.01 0006 SP006 BASETABLES
J2EE ENGINE CORE TOOLS 7.01 0006 SP006 CORE TOOLS J2EE ENGINE
JAVA LOG VIEWER 7.01 0006 SP006 SAP JAVA LOG VIEWER 7.01
JAVA SP MANAGER 7.01 0006 SP006 JAVA SP MANAGER 7.00
KMC BASE COMPONENTS 7.01 0006 SP006 KMC BASE COMPONENTS 7.01
KMC COLLABORATION 7.01 0006 SP006 KMC COLLABORATION 7.01
KMC CONTENT MANAGEMENT 7.01 0006 SP006 KMC CONTENT MANAGEMENT 7.01
KMC UI LAYER 7.01 0006 SP006 KMC UI LAYER 7.01
KMC WEB PAGE COMPOSER 7.01 0006 SP006 KMC WEB PAGE COMPOSER 7.01
LIFECYCLE MGMT PORTAL 7.01 0006 SP006 LIFECYCLE MGMT PORTAL 7.01
LIFECYCLE MGMT TOOLS 7.01 0006 SP006 LIFECYCLE MGMT TOOLS 7.01
MI ADMINISTRATION 7.01 0006 SP006 MI ADMINISTRATION 7.01
MI DRIVERS 7.01 0006 SP006 MI DRIVERS 7.00
MI WD LAPTOP 7.01 0006 SP006 Net Weaver Mobile Infrastructure Web Dynpro LAPTOP 7.00
PDK PORTAL SERVICES 7.01 0006 SP006 PDK PORTAL SERVICES 7.00
PORTAL CORE SERVICES 7.01 0006 SP006 EPBC 7.01
PORTAL FRAMEWORK 7.01 0006 SP006 EPBC2 7.01
PORTAL PLATFORM 7.01 0006 SP006 EP - Portal Server PORTAL 7.01
PORTAL WEB DYNPRO 7.01 0006 SP006 PORTAL WEB DYNPRO 7.01
RTC 7.01 0006 SP006 RTC 7.00
RTC-STREAM 7.01 0006 SP006 RTC-STREAM 7.00
SAP CAF 7.01 0006 SP006 SAP CAF 7.01
SAP CAF-KM 7.01 0006 SP006 SAP CAF-KM 7.01
SAP CAF-UM 7.01 0006 SP006 SAP CAF-UM 7.01
SAP CPS BASIC (SCHEDULER) 7.01 0004 SP004 Job scheduling capabilities of SAP NetWeaver 7.01
SAP ESS 603 0006 SP006 SAP ESS 603
SAP INTERNET KNOWLEDGE SERVLET 7.01 0006 SP006 SAP Internet Knowledge Servlet 7.00 (SAP J2EE IKS)
SAP J2EE ENGINE 7.01 0006 SP006 SAP J2EE Engine 7.01
SAP J2EE ENGINE CORE 7.01 0006 SP006 SAP J2EE ENGINE CORE 7.01
SAP JAVA TECHNOLOGY S OFFLINE 7.01 0006 SP006 SAP JAVA TECHNOLOGY S OFFLINE SAP TECH S OFFLINE 7.01
SAP JAVA TECHNOLOGY SERVICES 7.01 0006 SP006 SAP JAVA TECHNOLOGY SERVICES (Schicht 3 Dummy) SAP JAVA TECH SERVICES
SAP MI CLIENT 7.01 0006 SP006 SAP Mobile Infrastructure Client 7.0
SAP MSS 600 0017 SP017 SAP MSS 600 (Manager Self Services)
SAP PCUI_GP 603 0006 SP006 SAP PCUI_GP 603
SAP SOFTW. DELIV. MANAGER 7.01 0000 SAP JAVA SL 7.01
SOFTWARE LIFECYCLE MANAGEMENT 7.01 0006 SP006 SOFTWARE LIFECYCLE MANAGER 7.01
UME ADMINISTRATION 7.01 0006 SP006 UME ADMINISTRATION 7.01
UWL COLL PROCESS ENGINE 7.01 0006 SP006 UWL COLL PROCESS ENGINE 7.01
VISUAL COMPOSER BASE 7.01 0006 SP006 VISUAL COMPOSER BASE 7.00
VISUAL COMPOSER BI KITS 7.01 0006 SP006 VISUAL COMPOSER BI KITS 7.00
VISUAL COMPOSER FLEX 7.01 0006 SP006 VISUAL COMPOSER FLEX 7.00
VISUAL COMPOSER FRAMEWORK 7.01 0006 SP006 VISUAL COMPOSER FRAMEWORK 7.00
VISUAL COMPOSER GP KITS 7.01 0006 SP006 VISUAL COMPOSER GP KITS 7.00
VISUAL COMPOSER XX KITS 7.01 0006 SP006 VISUAL COMPOSER XX KITS 7.00
WEB DYNPRO EXTENSIONS 7.01 0006 SP006 WEB DYNPRO EXTENSIONS 7.01
I expect to see more than the 6 previously mentioned files available for download, also the option for EHP2 which I know is available, or am I wrong in expecting this.

Solutions for Maintenance Optimizer via Tr. DSWP

Hi!
I have some simple question.
I have already installed Solution Manager and established all the steps for the Maintenance Optimizer.
I also created two systems via Tr. SMSY and have defined the logical components.
I also defined one solution via DSWP and would like to demonstrate that the maintenance functionality is working fine.
But I cannot see any systems, if I am clicking on "Maintenance Optimizer".
How can I do this step in order to show the maintenance optimizer functionality for some solution in the Tx. DSWP?
Thank you!
regards

Hi!
Thank you.
>Go to the solution settings and make right click over the system, select "put in solution"
Where can I find this issue or which TX. do you use?
The second problem is thet I cannot see some grafic elements if I am clicking ot the Servers (Tx. solution_directory) and I am getting the error "Could not initialize"
Thank you!
regards

Solution Manage Maintenance Optimizer Installation

Hi,
I am in the process of trying to configure maintenance optimizer for solution manager. I have performed the following pre-requisites as specified in the SAP documentation
1. Support Package 09 for Solution manager
2. Applied OSS Notes 1024932, 1008717, 0950974
3. Set up user with appropriate roles and authorizations SAP_MAINT_OPT_ADMIN
4. Activated BC Sets as dictated by OSS note 990534
5. Define a Solution
6. Assign S-user to MO user
7. Check RFC Destination and assign S-user Login details
When I enter the solution and attempt to configure MO via Change Management -> Support Package Stacks, I get as far as the screen where you select the appropriate product version. I select the product and click to continue however I receive the following message
'Condition REQUEST_IN_PROCESS is not checked without Change Management integration'
Can anyone give me any suggestions to resolve this error.

Hi Stoecker,
I am also getting same problem.i followed that note which you have mentioned.
but where do i deselet the "íntegr' field?i am not getting
can plz exploain me on this.
and also one thing i want to add SAP ECC under systems in smsy transaction.
when i am trying to add it is asking for Product key.
can u plz provide me the key?
Thanx in advance.
Thanks and Regards,
Vinnu.

Maintenance Optimizer in SAP Solution Manager

what is Maintenance Optimizer in SAP Solution Manager and what are its benefits

Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
 Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
 Select Header Data
 Click Installed Product Versions
 In the product box add whatever you require for this system
 Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
 User: <Username>
 Pass: <Pass>
 Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
 Select NEW
 Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
 Select Solution Landscape Maintenance
 Select System Groups and Logical Components Tab
 Open Solution Landscapes
 Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
 GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply

Adding existing systems to a new Solution Manager 7.0 Ehp1 system

Dear Experts,
We've just installed a new Solution Manager 7.0 Ehp1 system, we have a 3 system landscape in action, please need your help to connect these systems with this new Solution Manager system. The post installation Initial Configuration and Basic Configuration has been performed successfully. Also need your help with Maintenance Optimizer configuration and setting up EWA.
Please do share experiences, links and documents for the above.
Thanks in advance,
Best Regards,
basis-novice

Page 65-67 of Netweaver EHP2 Upgrade Guide found in service.sap.com/instguides.
You can use the explanation below to configure MOPZ and maintain systems in SMSY.
4.5.2Configuration of the Maintenance Optimizer
You have to configure the Maintenance Optimizer. For a list of configuration tasks, see the Maintenance Optimizer Configuration Guide.
Make sure that you run the guided procedure SOLMAN_SETUP after every installation or update of SAP Solution Manager and that it completes successfully.
Related Documents
Available at...Maintenance Optimizer Configuration Guide http://service.sap.com /mopz (link at the bottom of the page)
4.5.3Maintaining System Landscape Information
The Maintenance Optimizer relies upon up-to-date information about your system landscape. Therefore you have to maintain this data in SAP Solution Manageru2019s system landscape (transaction SMSY). In the following, you will find the description how to maintain this data. If you already have maintained the system landscape data, then check if the data is correct.
If you use the System Landscape Directory (SLD), then use it to capture the system data.
If you do not use the System Landscape Directory (for example, if you have a pure ABAP system), you use RFC connections to maintain the data.
Procedure
Maintaining the System Landscape Data Using SLD
1.
Register both Java systems and ABAP systems that you want to update in your central SLD.
The central SLD can either be on your SAP Solution Manager system, or you can have a separate system where you run the SLD (central runtime SLD). If you use a central runtime SLD, make sure that it is synchronized with the local SLD of your SAP Solution Manager system.
4.5.3Maintaining System Landscape Information
The Maintenance Optimizer relies upon up-to-date information about your system landscape. Therefore you have to maintain this data in SAP Solution Manageru2019s system landscape (transaction SMSY). In the following, you will find the description how to maintain this data. If you already have maintained the system landscape data, then check if the data is correct.
If you use the System Landscape Directory (SLD), then use it to capture the system data.
If you do not use the System Landscape Directory (for example, if you have a pure ABAP system), you use RFC connections to maintain the data.
Procedure
Maintaining the System Landscape Data Using SLD
1.
Register both Java systems and ABAP systems that you want to update in your central SLD.
The central SLD can either be on your SAP Solution Manager system, or you can have a separate system where you run the SLD (central runtime SLD). If you use a central runtime SLD, make sure that it is synchronized with the local SLD of your SAP Solution Manager system.
4.
Create an RFC connection
1.
Choose the Client tab for your system.
2.
Maintain at least client 000.
3.
Create an RFC connection between the Solution Manager and the system you want to update using the RFC Assistant.
5.
Start the data transfer
To initiate the remote transfer of system data from the target system, choose the Read System Data Remote.
RECOMMENDATION
We recommend you to schedule automatic data transfers using transaction SMSY_SETUP.

Configuring Maintenance Optimizer issue

Hi All,
This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
I followed the IMG guide step by step.
But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
Instead I get a message:
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
Please do let me know what would be the issue.
I have followed the note 990534 and doen with the BC sets.
But I am not sure where am I making a mistake.
One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
I have completed the solution landscape, logical component, etc.
Please help...
Regards,
Sapfan

Hi JP,
My current SP levels are:
SAP_BASIS - 0011
SAP_ABAP - 0011
PI_BASIS 2005_11 - 0011
ST-PI 2005_11 - 0003
SAP_BW - 0011
SAP_AP - 0007
BBPCRM 5 - 0007
CPRXRPM - 0007
ST400 - 0010
ST-ICO - 0008
ST-SER - 0007
The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid SAPRouter once all the SM config is done.
I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
I changed back the UME source to client 001, but still same.
Moreover the maintenance optimizer is not showing the satellite system.
I am really stuck.
Please let me know if you require more information.
I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
I started this only after applying SP10.
Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
WIll the system not reflect is the java ebngine is down???
Regards,
P.K

Maintenance Optimizer - Selection of Main Instances

Hello. I have configured a Landscape Component in transaction SMSY. There is a tab called "Selection of Main Instances".
It seems that tab drives what I see when I run the maintenance optimizer. The checkboxes selected there determine what components that I see when creating a new maintenance transaction.
Is there a way to populate those check boxes from the satellite system. It seems like there is a gap here. Manually configuring that can lead to errors - the exact thing Sol Man is supposed to prevent.
Note the "software components tab" is automatically populated from the satellite, but it does not affect the maintenance optimizer.

Hello,
Make sure that following things are OK :
- Solution Manager should be patched to the latest release
- The ERP 6.0 system must have the product version SAP ERP 6.0. Make sure that it is not accidentally maintained as SAP ECC 6.0.
Also have a look at these OSS-notes:
SAP Note 1122966 Maintenance Optimizer: Notes for Enhancement Packages
SAP Note 1287216 Maintenance Optimizer: pre-select technical usages
SAP Note 1139602 Several enhancement package releases on one system
SAP Note 1134872 Maintenance Optimizer: FAQ for Stack Delta Files
SAP Note 1233954 Maintenance Optimizer: No XML Generated in EPS Inbox
SAP Note 1172948 SAP Solution Manager - Basic functions
Wim

MAINTENANCE OPTIMIZER CONFIGRATION

Hi all
We just completed solution manager 4 .0 installation successfully . What is the next step had be done for maintenance optimzer configuration .
kindly let me know the step by step configuration of maintenance optimzer .
Regads
Selvan

Hello Markus,
Yes, it is right if MAINTENANCE OPTIMIZER need for confirm files in the Download Basket only.
But if you want automatically create message to Solman Support Desk for maintenance procedure with information about SAP components, systems, versions etc. and other functions (determination current installed support stack in the system and files needed for update this system etc.) of MAINTENANCE OPTIMIZER assigned to defined system of system landscape you must define system in the SMSY.
Regards,
Arkadiy

Maintenance Optimizer Step 2 - Select Files cannot view

Hi,
We're using Solman 7.0 EHP to download EHP4 for ERP 6.0. We have maintained in SMSY, system type = ERP 6.0.
From the Maintenance Optimizer step 2- Select files, we cant see both the option of "maintenance" or "enhancement package installation" as shown in the SAP guide. The only option is "Find Download Files" button. Anyone here experience this issue before ?

Hi,
First of all, please make sure that:
- You are a registered ramp up customer.
- The S-user defined in AISUSER in solution manager has the
authorization to download ramp-up installation files.
Also make sure that you have installed all the notes listed in
1122966 for your Solution Manager release.
The option of installing Enhancement Packages in an ERP 6.0
system is only offered in the Solution Manager Maintenance
Optimizer if the systems assigned to the process are assigned to
the product version ERP 6.0 or ERP 2005 in the Solution Manager
system administration (transaction SMSY).   The product version
ECC 6.0 must not be used for the installation of Enhancement
Packages. The attached Note 1022072 describes step by step how to
change a product version assigned to a system.
The following notes should also be usefull:
   1134872 : Maintenance Optimizer: FAQ for Stack Delta Files in EPS
   1156571 : Maintenance Optimizer: Download Basket and SLM Download
   1168160 : MOPZ: Unicode selected automatically
   1170592 : MOPZ: S-User Enhancement
   1233954 : MOpz: No XML would be generated in EPS inbox
   1277035 : Solution Manager: EHP4 product data missing
Best regards,
Felipe Pitta

Patch confirm problem in maintenance optimizer.

Dear Experts,
i had configured solution manager maintenance optimizer.
previously while starting i had a problem with
and it was solved.
After, going in to Solution_manager in the selected solution,
i had selected the server and component, for which i need to download the
support package files and upgrade my application components.
and after selecting the required files,i'm able to see the selected files in download
basket manager.But, i'm not able to see the files in popup coming to confirm the
components.
i have no idea on what went wrong.
i got stuck up here, since after confirming the selected packages,it will go to
Perform imlementation and to END.
anyway i had saved the status.
i request you to give your inputs for solving the problem.
one warning i'm getting while starting "solution_manager"
is as follows:-
Profile parameter icm/host_name_full is not set correctly (see long text)
thanking you in advance.
by
raghav

Hi,
I think you need to set the profile parameter "icm/host_name_full" in rz10 T-Code
in instance profile it should in the following manner "host name of your server.your company name.com"
e.g.:mycomputer.mycompany.com
Reward the points if useful

After EHP1 upgarde Maintenance Optimizer not work

Dear ,
In our solution Manger Maintenance Optimizer was proper configure and working . But After Implement or Upgrade EHP1 ,When I run tcode solution_manager for downloading some SP.Then click on Maintenance Optimizer its direct goes to http://hostname/client001......etc
After Implemention EHP1 on Solution manager 7.0 ,Should we configuer Maintenance Optimizer again. OR any post implementation step after EHP1 upgrade.
why it going to http://hostname/client001......
Now how I can download SP or Note from my solution manager in that EHP1 has been upgraded.
regards

I have upgrade solman 7.0 to EHP1 solman 7.01 SP26.
in etc/hosts IP address and Host name allready exist.
when Click on Maintenance Optimizer it goes on beow site
http://saprouter.domain.ext:8000/sap/public/myssocntl?sap-client=100
Where saprouter is my solman Host Name and Client 100 is where I am logging.
is any parameter changes required for resolve this problem
regards

Error with Maintenance Optimizer in Solution Manager 4.0

Hi, I am configuring Solution Manager for download SP, I check marketplace and download the guide, when I try to download a SP following message show me:
"Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM)."
I go to sm59, verify RFC SAP-OSS with correct data, I found at guide following Host :
/H/54.16.44.50/S/sapdp99/H/54.62.200.35/S/
When I try press Connection Test Buttom I can not connect to SAP.
Do you know which can be my error? .....
Regards.

Hi,
Following the note 1024932
Steps to do before configre the maintance optimizer you need to configure sattilite systems in solution manager.
go to SMSY and configre R\3 systems.For these systems you need to create RFC connections and Logical comp.
http://service.sap.com/rkt-solman
for tutors and PDFs how to set up MOPZ.
Points if it helpfull
Regards
Neni

Adding a system to Solution in Maintenance Optimizer

Similar Messages

Maybe you are looking for