Adding a widget to fullscreen slideshows

Hi,
I know this feature isn't available yet but I think it's long past due. I'd like to add buttons to each slide that would slide with the picture - does anyone know any good work-arounds that would keep the slideshow at a 100% fullscreen proportion?
Cheers,
D

Hi Darcy,
You can't have any other content other than an image in the Slideshow Widget frame. You can instead use a Composition Widget to acheive what you want, however it does not have a Fullscreen option available. But it can accommodate any kind of content inside its target frame, even other widgets.
Cheers,
Vikas

Similar Messages

Fullscreen slideshow widget

Does anyone out there know how a close button can be added to the full screen slideshow? The close button is available with a fullscreen slideshow in the lightbox mode but is not available when the lightbox check box is unchecked

Hi Mark,
Yes, you are right the close button is not available with the full screen slide show and is only there when you check the light box option. This is an intended behavior, as the full screen slide show can't be closed and it will remain there on the page. If you want to temporarily show the slideshow and then close it, you will need to use the lightbox option.
There is no option in Muse at this point to have the lightbox enabled by default when the page is visited. You can add this to the ideas section on the forums.
- Abhishek Maurya

Moving fullscreen slideshow widget.

I'm trying to add a fullscreen slideshow to the top of my page. Anytime I add the widget however, it always positions itself in the middle of the site. I can't find any option to move it and even adjusting the page height, footer, header, etc.... just makes the slideshow reposition itself to the middle.
An example of what I'd like is the wild isles preview always shown where just below the main navigation they have a fullscreen slideshow. Is this possible?

Ok I done exaclty what you described and I got what you got in your screen shots above ... then AFTER I resized the Font Size to 200px I then (as I suggested) resized the white boxes individually, to a width of 175 NOT the Font Size but the actual box themselves using the white handles around the boxes, when they are selected ... I repositioned them accordingly ... after that they looked right ... ... as seen in my screenshots below ... the only difference being, I resized the white boxes which you didn't list in the numbered list, in your reply, above? ...
Did you mean that resizing the Font was actually resizing the boxes? ... could it be a misunderstanding? ... ...
My setup:
cheers
GemBro

Fullscreen Slideshow Widget Bugs

Overall I'm happy with the new Fullscreen Slideshow Widget but noticed a couple things
Touch does not work on Surface 2
Tested no an iPad and swipe works until you hit the last slide. You need to hit the arrow buttons or swipe back to the previous slides

Touch does not work on Surface 2
For whatever reason, Microsoft with IE chose to implement a different API for touch than any other touch device. Today the output of Muse supports swipe on Android and iOS. I expect as Windows 8 devices gain marketshare we'll invest the engineering resources to add IE-specific code for swipe.
Tested no an iPad and swipe works until you hit the last slide. You need to hit the arrow buttons or swipe back to the previous slides
This basically mimicks the most common behavior of swipe on iOS devices. In the future we're likely to add functionality and user control to support a choice between having collections stop at the first/last item when swiping or having a continuous loop behavior.

Parallax scrolling with fullscreen slideshow

I'm building a parallax site, in the first photo box, I want the photos to flip (as a fullscreen slideshow) for a few frames before it scrolls. Is this possible?

Hi
With current Muse feature, this wont be possible as slideshow change can be either automatic or with scroll.
Few frames before scroll using the widget wont work because when you will insert the widget it will work when you will scroll or it would be automatic.
You can add this as feature request.
Thanks,
Sanjit

How to make a fullscreen slideshow like this?

this is an app I found that the slideshow is what I want to make,but with original slideshow I can't make it,so I really want to know the special way to do
I am using the adobe content viewer on ipad to test my file, is it the reason? some functions are limited?
There is a small pic, when I click it,the whole page flip, then it is a fullscreen slideshow and has some special share link

argantara wrote:
anyone know if i can make a text effect like in this video: http://www.youtube.com/watch?v=gRyPj...1CA12E38536E7C
the moving one that starts in 0:23
and also the font too. can i do it in final cut pro x? or maybe iMovie? thanks guys!
You can use any font available on your system, so if the font is there, or can be bought or downloaded, just use it.
As for the effect, if you mean the text flowing from right to left, you can do it in FCP X pretty easily. Either use a title meant for that sort of movement (like Alex4D Ticker+, which is a free download), or just use a static title like Basic, enter a long text and keyframe the position.
As for the big shake, you may try the "Earthquake" effect that comes standard with FCP X.

Fullscreen Slideshow blurred why ?

The new Fullscreen Slideshow is very nice. But i have one Problem. I really have very sharp images but when I pack it in the slideshow and open my Page with the browser.
All pictures in the Fullscreen Slideshow are blurred but why?

What are the pixel dimensions of your monitor?
The pixel dimensions for an Apple 30" Cinema Display or a 15" Retina MacBook Pro are both 2560x1600.
At present Muse is resizing your full screen slideshow hero images during export/upload/publish to a size that's dependent on their size in Muse Design view. That was an unfortunate choice on our part. For a pending 7.x update of Muse the behavior will change to limit images to 2048 pixels in their largest dimension.
A 4 megapixel image is generally a large download and thus the impact on page load time should be considered.

Fullscreen slideshow mystery...

Hey guys,
Is there anyway of making the fullscreen slideshow display behind the master page headerbar? To clarify, when I set a header bar/logo on my master page then go to a child page (with the master applied to it) and activate a fullscreen slideshow, the slideshow completely covers it up. I've tried various things and nothing seems to be working. The only solution I've found is to disable the master page link on that one child page and locally stick a header bar/logo in there, but it kind of screws up the layout.
Thoughts from anyone smarter than me are very welcome!
Cheers!

Hmmm I don´t know If I understood well but maybe this tut can help you, I found It quiet usefull
http://tv.adobe.com/watch/adobe-evangelists-terry-white/how-to-create-a-hero-slideshow-for -your-homepage-with-adobe-muse-cc/
Hope It´s helps!

When adding Custom Text to a slideshow in Aperture, I can no longer centre the text in the text box. Is there something I am missing? I am running Aperture 3.6 on Yosemite. Any ideas gratefully received, thanks.

When adding Custom Text to a slideshow in Aperture, I can no longer centre the text in the text box. Is there something I am missing? I am running Aperture 3.6 on Yosemite. Any ideas gratefully received, thanks.

Which theme are you using?
When I am adding text in a slideshow, I found, that it will depend on the theme, if the text will be centered or flushed left. The Classic and Ken Burns theme are centering the text, the newer themes will present it flushed left.
I found no way to select a custom justification for the text.

Fullscreen slideshow 'DOWNSCALE ONLY' option please

Currently images pixelate and lose quality when browser viewport is sized larger than the image. This is not acceptable for a photography gallery.
Please include 'DOWNSCALE ONLY' option for fullscreen slide shows.
I don't want to have to use huge images to cover every screen size possibility, because the images take too long to load.
Every slideshow product I've ever seen has a 'downscale only' option to avoid image pixelating in a larger browser viewport.
Why is this still not an option in Muse fullscreen slideshow?

Of course there is!
Simply connect the audio L+R (white and red) plugs directly to the audio input source you want to use, such as the import source of your stereo (you may need to use extension RCA/phono cables, 2 male to 2 female). The composite video (yellow) plug, or S-Video if using the Photo Dock, will stay connected to your chosen TV or monitor source.

Fullscreen Slideshow suggestion?

Anyone have any tips on a fullscreen slideshow?
Issues with Viewer navigation swipe being overridden by Overlay slideshow navigation swipe.
Would this simply be better to do in HTML? Any examples to use?
Dave

As you've noticed, it's not a good idea to rely on swiping with full-screen slideshows. You can get yourself stuck. One option is to use Auto Start to Tap to Play/Pause, which will still let you swipe to the next article. If you really want to enable swiping, consider creating a near full-screen slideshow (1024x~680) to leave room for a title bar that allows article navigation.

Fullscreen slideshow not working properly on Chrome

Firefox, explorer and safari return no problems, but on chrome, whenever I scroll down there's background fill going up over the slideshow until it's fully covered.
What is happening here? I tried a lot of things but nothing works.

Ok
I have a fullscreen slideshow on the bottom layer. On the higher layers there is multiple content with text, slideshows, thumbnails etc.
The idea is to show always de fullscreen slideshow as a background.
As I said, it only crashes on Chrome.
When I start scrolling, the slideshow starts getting covered from foot to head by the browser fill. As if the browser fill was being displayed over the slideshow.
It's not that the slideshow scrolls up beacuse the images stand still all the time until they are fully covered by the browser fill.
Thank you.

Hi Guys, Just added the widget for Spry Image Slideshow...HELP!

How do I add my own pictures the the slideshow? I'm not the best with this so your help would be amazing!!!
Please reply
Thanks,
Oli

Gramps

Help needed: Adding 2nd widget makes 1st widget stop working

Dear all,
I use 1 widget, jQuery Cycle, and it was working fine, until i added a 2nd one, FlexSlider.
How can i make both working on the same page?
My website is : VINDSTERS - Wij Vinden wat u zoekt! and please see my coding below.
Thanks a lot!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"></script>
<script type="text/javascript" src=
"main slide js/smoothscroll.js"></script>
</style>
<script type="text/xml">

</script>
<script src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script src="main slide js/jquery-1.6.min.js" type="text/javascript"></script>
<script src="main slide js/jquery.cycle.all.js" type="text/javascript"></script>
<script src="gevonden door js/modernizr-2.5.2-respond-1.1.0.min.js" type="text/javascript"></script>
<script src="gevonden door js/jquery-1.7.2.min.js" type="text/javascript"></script>
<script src="gevonden door js/jquery.flexslider-min.js" type="text/javascript"></script>
<script src="gevonden door js/jquery.mousewheel.js" type="text/javascript"></script>
<script src="gevonden door js/jquery.easing.1.3.js" type="text/javascript"></script>
<script>
$(document).ready(function() {
    $("#cont2").hide();
$('#showMenu').click(function()
$("#cont2").slideToggle('slow');
$(document).ready(function() {
$('.closeMenu').click(function()
$("#cont2").slideUp('slow');
</script>
<style type="text/css">
/* BeginOAWidget_Instance_2559022: #slideshow_header */
#slideshow_header {
    padding: 0px;
margin:0;
#slideshow_header-caption{
padding:0;
margin:0;
#slideshow_header img, #slideshow_header div {
    padding: 0px;
    background-color: #ffffff;
-webkit-border-radius: 5px;
-moz-border-radius: 5px;
border-radius: 5px;
    margin: 0;
/* EndOAWidget_Instance_2559022 */
</style>
<link href="css/style.css" rel="stylesheet" type="text/css" />
<link href="css/flexslider.css" rel="stylesheet" type="text/css" />
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<b><title>VINDSTERS - Wij Vinden wat u zoekt!</title></b>
<meta name="Description" content="Vindsters.nl Wij vinden wat u zoekt" />
<meta name="keywords" content="vindsters,vindsters.nl,tweedehands, zoeken, design, vintage, vinden, service, meubels, kleding, schoenen" />
<link href="icons/logo-vindsters-square.gif" rel="shortcut icon " />
<link href="style.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="#"><h1><a href="#" id="showMenu">MENU
</a> </div>
<div id="cont2" class="hidden">
    <ul>
<li>s
    <h1><a href="#fadein" class="closeMenu">HOME</a></h1>
</li>
<li>
    <h1><a href="#info" class="closeMenu">HOE WERKT HET?</a></h1>
</li>
<li>
    <h1><a href="#mainbox2" class="closeMenu">PRIJZEN</a></h1>
</li>
<li>
    <h1><a href="#leftcollum2" class="closeMenu">GEVONDEN DOOR...</a></h1>
</li>
<li>
    <h1><a href="#mainbox" class="closeMenu">OVER VINDSTERS</a></h1>
</li>
<li>
    <h1><a href="#footer" class="closeMenu">CONTACT & VOORWAARDEN </a></h1>
</li>
</ul>
<p> </p>
</div>
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow_header
       slideshow_headerAddCaption=true;
$(document).ready(function() {
$('#slideshow_header').cycle({
after: slideshow_headerOnCycleAfter, //the function that is triggered after each transition
autostop: false,     // true to end slideshow after X transitions (where X == slide count)
fx: 'scrollLeft,',// name of transition effect
pause: true,     // true to enable pause on hover
randomizeEffects: true, // valid when multiple effects are used; true to make the effect sequence random
speed: 1000, // speed of the transition (any valid fx speed value)
sync: true,     // true if in/out transitions should occur simultaneously
timeout: 7000, // milliseconds between slide transitions (0 to disable auto advance)
fit: true,
height:   '570px',
width:         '100%'   // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshow_headerOnCycleAfter() {
if (slideshow_headerAddCaption==true){
$('#slideshow_header-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow_header">
   
<img src="images/front-1.jpg" width="100%" height="500" title="" /><img src="images/front2.jpg" width="100%" height="500" title="" /></div>

<div id="slideshow_header-caption"></div>
<div id="tab">
<h4><img src="icons/start2.png" width="310" height="128" alt="button" onclick="window.open('http://vindsters.nl/vindditnu%20php%20version.php','Websonic','width=960,height=600,scroll bars=no,toolbar=no,location=no'); return false" /></h4>
</div>
<div id="part2">
    <div id="fadein">
      <h4> Hallo! </h4>
<h4> Wij zijn VINDSTERS.NL    </h4>
      <h2>Vinden word vanaf nu heel eenvoudig!</h2>
      <h2>Ben je al tijden opzoek naar iets, maar heb je geen idee waar je het moet vinden? </h2>
      <h2>Geen zin of tijd om de duizende advertenties op makrtplaats/ebay of speurders af te gaan?</h2>
      <h2>Vindsters vind alle 2de hands spullen die jij zo graag wil hebben! </h2>
      <div id='button'>
        <p><img src="icons/start2.png" width="310" height="128" alt="button" onclick="window.open('http://vindsters.nl/vindditnu%20php%20version.php','Websonic','width=960,height=600,scroll bars=no,toolbar=no,location=no'); return false" /></p></div>
    </div>
    <div id="info">
      <h4>AANVRAGEN! </h4>
      <h2>Laat ons in je aanvraag met een korte omschrijving weten wat je zoekt. </h2>
      <h2>Naar aanleiding van je aanvraag stellen onze vindsters een korte vragenlijst samen die je per email ontvangt. </h2>
      <h2>Hierin kan je heel gemakkelijk je verdere wensen aangeven. </h2>
      <h2>Alles compleet? Stuur de <br />
        vragenlijst dan naar ons terug en betaal gemakkelijk via de IDeal link in de mail.    </h2>
    </div>
        <div id="info3">
          <p><img src="images/info2.gif" width="748" height="213" /></p>
    </div>
    <div id="tab2">
      <h1>v Lees meer v</h1>
    </div>
    <div id="info2">
      <p> </p>
      <h4> </h4>
      <h4>GEVONDEN! </h4>
<h2>Zodra je vragenlijst & betaling binnen is, gaan wij voor je aan de slag! </h2>
      <h2>Binnen het afgesproken
        termijn, ontvang je per mail 3 tot 5 passende
        advertenties. </h2>
      <h2>Deze prducten worden persoonlijk door ons geselecteerd, dus je ontvangt altijd een passend aanbod! </h2>
      <h2>& mochten we onverhoopt helemaal niks kunnen vinden, dan krijg je natuurlijk je geld terug. </h2>
      <h2>Alles compleet? Stuur de vragenlijst dan naar ons terug en betaal gemakkelijk via de IDeal link in de mail.</h2>
      <p> </p>
      <h1> </h1>
    </div>
    <div id="mainbox2">
      <div id="insideright2">
        <h4>PRIJZEN</h4>
<h2>Bij VINDSTERS.NL betaal je altijd maar €5.95 per zoekopracht!      </h2>
        <h2>En succes gegarandeerd, want kunnen wij onverhoopt niet vinden wat jij zoekt?</h2>
        <h2> Dan krijg je de betaalde kosten gewoon terug!</h2>
        <p></p>
      </div>
</div>
    <div id="gevondendoor">
<h1>GEVONDEN DOOR VINDSTERS.NL</h1>
<script type="text/javascript">
// BeginOAWidget_Instance_2827522: #OAWidget
$(window).load(function() {
      $('#slider').flexslider({
     namespace: "flex-",             //{NEW} String: Prefix string attached to the class of every element generated by the plugin
    selector: ".slides > li",       //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
      animation: "slide",
    easing: "swing",               //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
      direction: "horizontal",   //String: Select the sliding direction, 'horizontal' or 'vertical'
    reverse: false,                 //{NEW} Boolean: Reverse the animation direction
    animationLoop: false,             //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
    smoothHeight: true,            //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
      slideshow: true,                //Boolean: Animate slider automatically
      slideshowSpeed: 5000,           //Integer: Set the speed of the slideshow cycling, in milliseconds
      animationSpeed: 600,         //Integer: Set the speed of animations, in milliseconds
      initDelay: 0,                   //{NEW} Integer: Set an initialization delay, in milliseconds
      randomize: false,               //Boolean: Randomize slide order
    useCSS: true,                   //{NEW} Boolean: Slider will use CSS3 transitions if available
      touch: true,                    //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
       video: false,                   //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
      directionNav: true,             //Boolean: Create navigation for previous/next navigation? (true/false)
      controlNav: true,               //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
      keyboard: true,              //Boolean: Allow slider navigating via keyboard left/right keys
      mousewheel: false,              //Boolean: Allow slider navigating via mousewheel
      prevText: "Previous",           //String: Set the text for the "previous" directionNav item
      nextText: "Next",               //String: Set the text for the "next" directionNav item
      pausePlay: false,               //Boolean: Create pause/play dynamic element
      pauseText: "Pause",             //String: Set the text for the "pause" pausePlay item
      playText: "Play",               //String: Set the text for the "play" pausePlay item
      startAt: 0,                //Integer: The slide that the slider should start on. Array notation (0 = first slide)
      pauseOnAction: true,            //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
      pauseOnHover: true,            //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
      start: function(){},            //Callback: function(slider) - Fires when the slider loads the first slide
   controlsContainer: "",          //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is                                        not found, the default action will be taken.
       manualControls: "",             //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
       // Carousel Options
    itemWidth: 0,                   //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
    itemMargin: 10,                  //{NEW} Integer: Margin between carousel items.
    minItems: 0,                    //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
    maxItems: 0,                    //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
    move: 0,                        //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
   before: function(){},           //Callback: function(slider) - Fires asynchronously with each slider animation
      after: function(){},            //Callback: function(slider) - Fires after each slider animation completes
      end: function(){}               //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
<div id="main-container">
    <p><a href="http://www.woothemes.com/flexslider/">Flexslider Demo and Documentation</a></p>
    <div id="main" class="wrapper clearfix">
      
      <div id="container">
        <div id="slider" class="flexslider">
          <ul class="slides">
            <li> <img src="images/kitchen_adventurer_cheesecake_brownie.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_lemon.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_donut.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_caramel.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_cheesecake_brownie.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_lemon.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_donut.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_caramel.jpg" /> </li>
          </ul>
        </div>
        <div id="carousel" class="flexslider" style="display:none;">
          <ul class="slides">
            <li> <img src="images/kitchen_adventurer_cheesecake_brownie.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_lemon.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_donut.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_caramel.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_cheesecake_brownie.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_lemon.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_donut.jpg" /> </li>
            <li> <img src="images/kitchen_adventurer_caramel.jpg" /> </li>
          </ul>
        </div>
      </div>
    </div>
    
</div>

    </div>
    <div id="leftcollum2">
      <h1>VOORWAARDEN!</h1>
<h2>Wij houden het graag zo simpel mogelijk! </h2>
<h2><a href="voorwaarden.html">lees hier de voorwaarden</a></h2>
      <p> </p>
</div>
    <div id="rightcollum2">
      <h1>VRAAG & ANTWOORD</h1>
<h2>Heeft u vragen of suggesties. Laat het ons weten! </h2>
      <h2><a href="contact.html">Contact</a></h2>
      <h2> </h2>
    </div>
    <div id="mainbox">
      <div id="insideright">
        <h1>Over VINDSTERS.NL </h1>
        <h2>Vindsters.nl is opgericht door Anne & Lisa van Steenbergen. Twee zussen met een passie voor mooie spulletjes.</h2>
        <h2>Het speuren naar tweedehands zit ze in het bloed. Talloze meubels, vintage laarzen, oud speelgoed of designer item is in de loop der jaren aangeschaft.      En in begin 2014 werd het tijd dit deze goede neus voor het speuren te delen met andere. Het resultaat, Vindsters.nl </h2>
        <h2>Vindsters.nl is een service die het mogelijk maakt om alles te vinden wat je zoekt op het gebied van tweedehands artikelen. </h2>
        <h2>Van die ene favorite spijkerbroek die je terug wilt of die dure merkbank die je voor een prikje hoopt te scoren tot dat kastje van ikea die niet meer word gemaakt of de speelgoedbeer die je vroeger had, Vindsters.nl bied je de mogelijkheid dit eenvoudig te vinden. </h2>
        <h2>Vindsters.nl selecteerd voor jouw persoonlijk 3 tot 5 advertenties die je zoekt uit alle duizenden advertenties die er online zijn.    </h2>
      </div>
    </div>
    <div class="button2">
<img src="icons/start2.png" width="412" height="149" alt="button" onclick="window.open('http://vindsters.nl/vindditnu%20php%20version.php','Websonic','width=960,height=600,scroll bars=no,toolbar=no,location=no'); return false" /></div>
</div>
    <div id="footer">
      <h2> <a href="voorwaarden.html" target="_new" class="smoothScroll">VOORWAARDEN</a>   | <a href="contact.html" target="_new" >CONTACT</a>   | <a href="http://www.pinterest.com/vinddit/" target="_new"><img src="icons/pinterest.png" width="20" height="20" align="absbottom" /></a>    <a href="https://www.facebook.com/" target="_new"><img src="icons/fb_1.png" width="20" height="20" align="absbottom" /></a></h2>
      <p><img src="images/iDEAL_120x30_dubbel.jpg" alt="IDEAL" name="ideal" width="120" height="30" id="ideal" /></p>
    </div>
</body>
</html>

Adding to osgood's reply, you are calling four different jquery libraries as in
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"></script>
<script type="text/javascript" src=
"main slide js/smoothscroll.js"></script>
</style>
<script type="text/xml">

</script>
<script src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script src="http://vindsters.nl/main slide js/jquery-1.6.min.js" type="text/javascript"></script>
<script src="http://vindsters.nl/main slide js/jquery.cycle.all.js" type="text/javascript"></script>
<script src="http://vindsters.nl/gevonden door js/modernizr-2.5.2-respond-1.1.0.min.js" type="text/javascript"></script>
<script src="http://vindsters.nl/gevonden door js/jquery-1.7.2.min.js" type="text/javascript"></script>
This will confuse the browser no end!
My advice is to remove the last three highlighted lines to see what happens.

Fullscreen slideshow will not "slide" automatically

To make it easy for my collegues to show a slideshow in full screen with 5 sec. delay and a soft transistion, I have made one in Acrobat and expect people to run it with 1 click in their Acrobat Reader X. It seems like I can store these parameters in acrobat PRO X under: EDIT-PREFERENCES-FULLSCREEN. There you can take away the "Alert when document requests full screen", set the speed of the full screen slideshow and ask it to loop. THE PROBLEM: even after saving the parameter the file wont start automaticilly to change slides. YES I know i can change the settings back to advance the show in Reader on each computer, but the hole point is to make a Oneclick experience. How can I pack the parameters into the file once and for all? PS You need a PC without Acrobat (only the reader) to remake my problem.

I had the same problem. Here is what you need to do:
1. Collect all your videos in one folder on your Mac
2 Through iTune transfer them to iPad via photo. Now they will be on your iPad
3. Open your presentation in Keynote on iPad.
4. Delete he video.
5. paste he video from your folder with the video in your iPad
6. automate it to come as a cube.
All set to go

Adding a widget to fullscreen slideshows

Similar Messages

Maybe you are looking for