Adding additional field 1 to selection screen of CATSSHOW (CADO)

Hello all,
We recently added one of the additional field's to show up on the data entry section when using
transaction CAT2...This is working fine and the data is entered into CATSDB.
When using CADO, one can display the addtional field 1 and sort by this field.
However, the users now want this additional field1 to be one of the selections when they
use report CATSSHOW (CADO).
Is there some type of way to configure SAP to have one of these additional fields show up
as a selection field on program CATSSHOW (CADO)? My searches in this forum and the web
have not shown me a solution yet.
Or do I have to create a 'Z' version of CATSSHOW like ZCATSSHOW and do this myself?
Thank-you,
Rick Crawford

Enhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better .

Similar Messages

Adding customer field to selection screen of RFKORD11 - Customer Statement Printing Program:

Hello,
We are required to add an important customer field to selection screen of customer
statement printing program: RFKORD11 for our South African branch.
Please advise us regarding this matter,
is there a proper user-exit or a repair is needed?
Kind Regards.

Enhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better .

Additional Fields on Selection Screen of VF04

Hi,
I need to add a new field to selection screen of VF04. How can i achieve this?
Regards,
Jayant
Edited by: jayant vikram on Oct 6, 2009 9:15 PM
Moderator message - This is almost a duplicate - post locked
Edited by: Rob Burbank on Oct 6, 2009 11:49 AM

Hi,
I need to add a new field to selection screen of VF04. How can i achieve this?
Regards,
Jayant
Edited by: jayant vikram on Oct 6, 2009 9:15 PM
Moderator message - This is almost a duplicate - post locked
Edited by: Rob Burbank on Oct 6, 2009 11:49 AM

Adding the field in selection screen

Hi Guru's,
how can i add the field in selection screen of t code qa33.
can any one help me pls.
Thanks & Best Regards,
Rakhi.

You can enhance the standard program RQEEAL10 using implicit enhancement points.
Click the spiral (Enhance) button (Shift + F4)
Go to Edit -> Enhancement operations -> Show Implicit Enhancement Poitns
Create an Enhancement Implementation and include your code there.
See the following link -> Source Code Enhancements - Part 5 of the Series on the New Enhancement Framework
Hope it helps
Neeraj

Additional field in selection screen of a abap query

Hi,
I am adding a new additional field in the selection screen through abap query(using transaction SQ02) which is of type VBRK-FKSTO.
The value entered can be 'X' or empty space.But the value which is entered in the selection screen is not getting reflected in the code.Kindly advice me on what needs to be done to capture the selection screen value in the code.
Regards,
S.Subasree

Hi
You can add new field in VFX3 selection screen as follow. In the report code we can see various explicit enahcement points provided by SAP.One of them is ENHANCEMENT-POINT sdblbddl_01 SPOTS es_sdblbddl STATIC. Here you can declare your selection screen parameters. Then in the processing i can see a call customer fucntion happening in VBSK_DISPALY which you can implement to add your logic.
Thanks
Nabheet

Adding additional field for selection criertoria for report painter

I am trying to add a new selection criterion for a report which is created from report painter. I have run Transaction Code GRR2 and selected the library 1VK which is cost centers: absorption costing and doubled clicked on the report.
Clicked on edit on the header à General data selection à I am looking for a option for company code but I cant find it in the list. Is there anywhere I need to flag the field company code as characteristic value or am I missing something??
Thanks
E

hi,
You might want to try add parameters in general data selection.... in addition you can add variable against this field so that it appears on selection-screen. You can look at standard SAP report for example.
hope this helps.
Cheers,
Gimmo

Adding one field in selection-screen in rfitemar

hi experts
1) I am converting the rfitemar to z or y program after that i have to add one field wbs element(projk) in selection screen.
2) The WBS Element values should be displayed in the output report ie one column which contain wbs element values .
Plz help me as soon as possible

Hi,
In this report,
1. find out the final table for display.
2. add ur custom fields in that table using appending structure.
3. find out correct enchance spot or BADI,...etc...before diaply(befor calling FM REUSE_GRID_DISPLAY or method SET_TABLE_for_display or..etc).
4. in that enchance spot or badi u can write ur logic.
Regards,
Ramesh.

Re:addition of fields in selection screen

hi good morning to all,
i want to add two fields in selection screen.these two are
       Service Representative ZQ
       Customs Representative ZG.
i want logic how to add these fields to output.
from these two i want to fetch the correponding pernr(field in vbpa i.e personal number)
please give me the solution as early as possible
thanks

Hai,
    If it is a report you can add the two field either as select option or parameter.
Regards,
Umasankar

Adding f4-help to selection screen parameter field

Hi all.
I need to add search help to a parameter field on selection screen:
PARAMETERS:
             p_reciv LIKE soos7-recnam.
What is the easiest way?
tia, regards

You can give F4 help by two ways:
1. Using internal table
2. Refering db table field.
Following are e.gs:
F4 help using internal table example:
DATA: BEGIN OF LI_FABGRP OCCURS 0,
FABGRP LIKE ZAPO_FABGRP-FABGRP,
BEGDA LIKE ZAPO_FABGRP-BEGDA,
END OF LI_FABGRP.
DATA : T_RETURN TYPE STANDARD TABLE OF DDSHRETVAL WITH HEADER LINE,
L_RETFIELD TYPE DFIES-FIELDNAME.
parameters : S_FABGR like ZAPO_FABGRP-FABGRP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_FABGR.
SELECT FABGRP BEGDA FROM ZAPO_FABGRP INTO table LI_FABGRP.
SORT LI_FABGRP BY FABGRP ASCENDING BEGDA DESCENDING.
Henter de mulige fabriksgrupper med nyeste BEGDA *indenfor hver
DELETE ADJACENT DUPLICATES FROM LI_FABGRP COMPARING FABGRP.
L_RETFIELD = 'FABGRP'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = L_RETFIELD
DYNPPROG = SY-REPID
DYNPNR = '1000'
DYNPROFIELD = 'S_FABGR'
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
TABLES
VALUE_TAB = LI_FABGRP
RETURN_TAB = T_RETURN
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
F4 help using field example:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_FABGR.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    tabname                   = mara
    fieldname                 = matnr
SEARCHHELP                = ' '
SHLPPARAM                 = ' '
DYNPPROG                  = ' '
DYNPNR                    = ' '
DYNPROFIELD               = ' '
STEPL                     = 0
VALUE                     = ' '
MULTIPLE_CHOICE           = ' '
DISPLAY                   = ' '
SUPPRESS_RECORDLIST       = ' '
CALLBACK_PROGRAM          = ' '
CALLBACK_FORM             = ' '
SELECTION_SCREEN          = ' '
IMPORTING
USER_RESET                =
TABLES
RETURN_TAB                =
EXCEPTIONS
FIELD_NOT_FOUND           = 1
NO_HELP_FOR_FIELD         = 2
INCONSISTENT_HELP         = 3
NO_VALUES_FOUND           = 4
OTHERS                    = 5
Select-options: s_rcode FOR g_grund . "Reason code
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_rcode-low.
Validation for Reasoncode
PERFORM sub_get_F4_rcodehelp .
FORM sub_get_f4_rcodehelp .
STRUCTURES Declarations
TYPES: BEGIN OF ty_rcode ,
grund TYPE mb_grbew,
grtxt TYPE grtxt,
END OF ty_rcode.
*Internal Table declaration
DATA : li_rcode TYPE STANDARD TABLE OF ty_rcode WITH HEADER LINE.
SELECT grund grtxt
INTO TABLE li_rcode
FROM t157e
WHERE spras = sy-langu .
*Help functions for external use
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'fieldname'
dynpprog = 'programname
dynpnr = '1000'
dynprofield = 'S_PCODE'
value_org = 'S'
TABLES
value_tab = li_rcode
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3 .
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " sub_get_F4_rcodehelp

Adding fields on selection screen dynamically

Hi all,
Can we add some fields to selection screen dynamically on pushbutton click?
Regards,
Dnyanesh

just have look below code
REPORT zrsdvsr1
       LINE-SIZE 220
       LINE-COUNT 65(5).
TYPE-POOLS : slis.
TABLES
TABLES: vbak.
DATA DECLARATIONS
Ranges
RANGES: r_posnr FOR vbap-posnr.
DATA: BEGIN OF t_veramt OCCURS 0,
        vbeln TYPE vbap-vbeln,
        posnr TYPE vbap-posnr,
        matnr TYPE vbap-matnr,
        netwr TYPE vbap-netwr,
        mwsbp TYPE vbap-mwsbp,
      END OF t_veramt.
DATA: BEGIN OF t_disamt OCCURS 0,
        vbeln TYPE vbap-vbeln,
        posnr TYPE vbap-posnr,
        matnr TYPE vbap-matnr,
        netwr TYPE vbap-netwr,
        mwsbp TYPE vbap-mwsbp,
        netwr_v TYPE vbap-netwr,
        mwsbp_v TYPE vbap-mwsbp,
        disc_val TYPE vbap-mwsbp,
      END OF t_disamt.
*&   ALV FIELDS
DATA : alv_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
       alv_layout TYPE slis_layout_alv.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_ver RADIOBUTTON GROUP g1 USER-COMMAND rad DEFAULT 'X',
             p_sab RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln NO INTERVALS MODIF ID gr1.
PARAMETERS:    p_dwfile TYPE rlgrap-filename
               DEFAULT 'C:\test1.txt' MODIF ID gr2,         "#EC NOTEXT
               p_upfile TYPE rlgrap-filename
               DEFAULT 'C:\test.txt' MODIF ID gr3.          "#EC NOTEXT
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_upfile.
**************F4 Help For Input File Name****************************
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = syst-cprog
            dynpro_number = syst-dynnr
            field_name    = 'C:\'
       IMPORTING
            file_name     = p_upfile.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dwfile.
**************F4 Help For Input File Name****************************
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = syst-cprog
            dynpro_number = syst-dynnr
            field_name    = 'C:\'
       IMPORTING
            file_name     = p_dwfile.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_sab = 'X'.
      IF screen-group1 = 'GR1' OR screen-group1 = 'GR2'.
        screen-active = '0'.
        screen-invisible = '1'.
      ELSE.
        screen-active = '1'.
        screen-invisible = '0'.
      ENDIF.
      MODIFY SCREEN.
    ELSE.
      IF screen-group1 = 'GR3'.
        screen-active = '0'.
        screen-invisible = '1'.
      ELSE.
        screen-active = '1'.
        screen-invisible = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
START-OF-SELECTION
START-OF-SELECTION.
Check Radio Button
IF p_ver = 'X'.
    PERFORM get_details_open_so_vertex.
ELSE.
    PERFORM get_details_open_so.
ENDIF.
Display the output.
PERFORM diplay_report .
regards
vinod

Adding new field to MB51 screen output

Hi All,
I need to add a new field TCODE2 from MKPF table on the screen output of MB51. I have added my new field thro SPRO following the below steps:-
Go to SPRO -- MM -- Inventory Management and Physical Inventory -- Reporting -- Define Field Selection for Material Document List
Here I have give
RM07DOCS MKPF TCODE2 Transaction code -- output box checked
and saved.
Now I tried to re-execute the transaction MB51 but not able to see the Tcode2 on the output screen .
Can any one help me out, if I am missing out something or is there any thing else i need to check on the ALV output to see the field TCODE2 on the screen og MB51?
Regards
Shilpa.

Hi,
Check these notes:
Note 357187 - MB51: Fields in field catalog / selection screen
Note 828104 - Enhancing MB51 for AFS
I hope this helps you
Regards
Eduardo

How can I add a new field in selection screen for this report

*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
        mseg,
        mch1,
        *mch1,
        mkpf,
        mchb ,
        makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
      wa_message_tab type esp1_message_wa_type ,
      sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout   type slis_layout_alv                     ,
      gt_fldcat   type slis_t_fieldcat_alv with header line,
      gt_header   type slis_t_listheader   with header line,
      gt_sortin   type slis_t_sortinfo_alv with header line,
      g_repid     like sy-repid                            .
define add-fieldcat.
gt_fldcat-fieldname     = &1.
gt_fldcat-ref_tabname   = &2.
gt_fldcat-seltext_s     = &3.
gt_fldcat-seltext_m     = &3.
gt_fldcat-seltext_l     = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt       = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
        sel   type xfeld,
        matnr type matnr,
        maktx type maktx,
        charg type charg_d,
        menge type menge_d,
        erfmg type erfmg,
       end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
      gv_code   like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
      gv_matdoc type bapi2017_gm_head_ret-mat_doc,
      gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
      with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
   exporting
     input = 'Z_ORAN'
   importing
     output = v_atinn.
call screen 100.
*&      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
    mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
         screen      like screen,
         index       type i,
         selected(1) type c,
         vislength   like icon-oleng,
         invisible(1) type c,
       end   of cols.
case ok_code.
    when 'DELE'.
      delete itab where sel eq 'X'.
    when 'ENTE'.
      check *mch1-charg is not initial.
      read table itab into witab with key charg = *mch1-charg.
      if not sy-subrc is initial.
        witab-charg = *mch1-charg.
        select single matnr from mch1 into witab-matnr
                           where charg eq witab-charg.
        if not syst-subrc is initial.
          set cursor field '*MCH1-CHARG'.
          message e115(12) with *mch1-charg.
        endif.
        select single maktx from makt into witab-maktx
                           where matnr eq witab-matnr
                             and spras eq syst-langu.
        witab-erfmg = 1.
        concatenate witab-matnr witab-charg into lv_objek .
        clear ls_inob .
        select single * into ls_inob
                        from inob
                        where objek = lv_objek and
                              klart = '023'    and
                              obtab = 'MCH1' .
        select single atflv from ausp into witab-menge
                 where objek = ls_inob-cuobj and
                       klart = '023' .
        append witab to itab.
**added
        clear *mch1-charg.
**added
      endif.
    when 'SAVE'.
      if mkpf-budat is initial.
        set cursor field 'MKPF-BUDAT'.
        message e055(00).
      endif.
      if mseg-lgort is initial.
        set cursor field 'MSEG-LGORT'.
        message e055(00).
      endif.
      if mseg-umlgo is initial.
        set cursor field 'MSEG-UMLGO'.
        message e055(00).
      endif.
      if mseg-bwart is initial.
        set cursor field 'MSEG-BWART'.
        message e055(00).
      endif.
      refresh imseg.
      loop at itab into witab.
        move-corresponding witab to wmseg.
        append wmseg to imseg.
      endloop.
      call function 'ZMM_POPUP_WITH_DATA'
        exporting
          imseg = imseg
        importing
          answer = answer.
      if answer eq 'Y'.
        perform create_goods_movement.
      endif.
    when 'P--'.
      clear ok_code.
      perform paging using 'P--'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P-'.
      clear ok_code.
      perform paging using 'P-'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P+'.
      clear ok_code.
      clear lines.
      perform paging using 'P+'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P++'.
      clear ok_code.
      perform paging using 'P++'.
      set cursor field 'MARA-MATNR' line 1.
    when 'SORA'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab ascending by (field).
      endif.
    when 'SORZ'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab descending by (field).
      endif.
    when 'PRNT'.
      perform write_alv.
endcase.
endmodule.                 " user_command_0100 INPUT
*&      Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule.                 " read_table OUTPUT
*&      Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule.                 " write_table INPUT
*&      Module exit INPUT
module exit input.
leave to screen 0 .
endmodule.                 " exit INPUT
*&      Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
    i_goodsmvt_items-material   = witab-matnr.
    i_goodsmvt_items-entry_qnt = witab-erfmg.
    i_goodsmvt_items-entry_uom = 'ST'.
    i_goodsmvt_items-move_type = mseg-bwart.
    i_goodsmvt_items-plant      = mseg-werks.
    i_goodsmvt_items-stge_loc   = mseg-lgort.
    i_goodsmvt_items-move_plant = mseg-umwrk.
    i_goodsmvt_items-move_stloc = mseg-umlgo.
    i_goodsmvt_items-batch      = witab-charg.
    append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
    perform determine_bapi_code using mseg-bwart
                             changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header = gv_header
      goodsmvt_code    = gv_code
    importing
      goodsmvt_headret = gv_headret
      materialdocument = gv_matdoc
      matdocumentyear = gv_matyear
    tables
      goodsmvt_item    = i_goodsmvt_items
      return           = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
    exit.
endloop.
if sy-subrc ne 0.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    wa_message_tab-msgid = 'M7'..
    wa_message_tab-msgty = 'S'.
    wa_message_tab-msgno = '060'.
    wa_message_tab-msgv1 = gv_matdoc.
    wa_message_tab-msgv2 = ''.
    wa_message_tab-msgv3 = ''.
    wa_message_tab-msgv4 = ''.
    append wa_message_tab to i_message_tab.
else.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
    loop at i_return.
      wa_message_tab-msgid = i_return-id.
      wa_message_tab-msgty = i_return-type.
      wa_message_tab-msgno = i_return-number.
      wa_message_tab-msgv1 = i_return-message_v1.
      wa_message_tab-msgv2 = i_return-message_v2.
      wa_message_tab-msgv3 = i_return-message_v3.
      wa_message_tab-msgv4 = i_return-message_v4.
      append wa_message_tab to i_message_tab.
    endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
    tables
      i_message_tab = i_message_tab.
endform.                    " create_goods_movement
*&      Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
    select single gmcode from t158g into p_code
    where tcode eq lt_t158b-tcode.
    if sy-subrc is initial.
      exit.
    endif.
endloop.
endform. " determine_bapi_code
*&      Form paging
form paging using code.
data: i type i,
        j type i.
case code.
    when 'P--'. tc_itab-top_line = 1.
    when 'P-'.
      tc_itab-top_line = tc_itab-top_line - line_count.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
    when 'P+'.
      i = tc_itab-top_line + line_count.
      j = tc_itab-lines - line_count + 1.
      if j le 0.
        j = 1.
      endif.
      if i le j.
        tc_itab-top_line = i.
      else.
        tc_itab-top_line = j.
      endif.
    when 'P++'.
      tc_itab-top_line = tc_itab-lines - line_count + 1.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
endcase.
endform.                    " paging
*&      Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_buffer_active        = ''
      i_callback_program     = g_repid
      i_save                 = 'A'
    i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = gs_layout
      it_fieldcat            = gt_fldcat[]
     it_sort                = gt_sortin[]
    tables
      t_outtab               = itab[].
endform.                    " write_alv
     Form find_list_header
form find_list_header.
data : v_datum(10),
         v_datlo(10),
         v_dathi(10),
         v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform.                    " find_list_header
     Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear   gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform.                    " fill_field_cat
     Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up            = 'X'.
gt_sortin-fieldname     = 'MATNR'. append gt_sortin.
endform.                    " fill_sortinfo
     Form top_of_page                                              *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      i_logo             = 'ZKUTAS'
      it_list_commentary = gt_header[].
endform.                    " top_of_page

HI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer

Add custom fields on selection screen and ouput in Transaction QM11

Hi All,
i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
please requeting the help asap if it is possible.

Have a glance in below thread.
Enhancing transaction QM10
Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well.

How can i declare a single radio button field in selection-screen ?

How can i declare a single radio button field in selection-screen ?

>
Rob Burbank wrote:
> And how will you turn it off once it is turned on??
>
> Rob
Thats correct ;)...See ravi if users will ask so many things its our Job to convay the correct solution ....
Just post your org requirement..SOo some body guide you better//
Sas

Validate a field on selection screen based on value entered on anothr field

HI,
There is a program with some fields in selection screen in EWM. The first field is Warehouse. I need to add another field 'Entity to Dispose' in such that what ever value I enter in Warehouse field, its corresponding values should only be displayed as F4 help for 'Entity to Dispose' field.
For eg: If I select the warehouse as 0799(lets say), then the F4 help for Entity to Dispose field should display only the values which are related to warehouse 0799 (and any other values pertaining to other warehouse should not appear).
Could anyone suggest, how this can be achieved?
Thanks in advance.
Regards,
Pavan

Hi,
You can use FM
DYNP_VALUES_READ
DYNP_VALUES_UPDATE
to read the another field value and Using that field build your internal table for f4 values.
and use FM F4IF_INT_TABLE_VALUE_REQUEST for F4 values..
do this on AT SELECTION-SCREEN ON VALUE REQUEST FOR <YOUR_F4_FIELDNAME>.

Adding additional field 1 to selection screen of CATSSHOW (CADO)

Similar Messages

Maybe you are looking for