Adding additional internal IP route

I have an internal router to connect to a different network. I want to be able to connect to devices in that network. I've selected Advanced->Routing and added a new route. I can now ping the addresses on that network, but can make no connections to them. Adding static routes to my PC allows the connections, but I'd rather the router handle the connections. Does anyone know of a way to allow those connections.

So you're able to ping from a host on VLAN1 to the vlan2?
Also are you using these instructions?
[PDF]
Creating an Ethernet VLAN - Actiontec
support.actiontec.com/doc_files/Creating_an_Ethernet_VLAN.pdf

Similar Messages

  • Locked out of additional internal drives... Help please

    Any help would be more then welcomed as I did something stupid and need a bit of help to fix it please.
    Had an issue today on my Mac Pro (2.8, Quad 5.1). All was running fine until I went to update a piece of 3rd party software (Fetch). After the download I went to drag new version into my apps folder and was told I didn't have permission to instal the app.
    Now to be clear, I've had a bit of an issue with this before as I'm running 2 mac pros in different locations and drag and copy files and folders from here to there on a regular basis via FTP and external drives. I also have all 4 slots filled on both systems with various drives set up for a particular function along with a number of externals. I've set permissions on both systems and all drives to "read and write" for both my accounts to have full access and each time "apply to enclosed items" was selected.
    But for some reason, from time to time, I have to authorise the file transfer. Haven't figured out the reason but it's not a huge deal so have left it.
    Today was the first time I have had access denied for my home folder when working from same system. Not thinking and while on the phone to someone (this is where I did the stupid part), I opened the info on my boot (startup) drive and decided to add both of my user accounts and change permissions for each in addition to the system, admin and everyone that was already there. This was done while working from it directly and then set options to "apply to enclosed items". Yea, smart I know.
    About 20 minutes passed and then it told me that it didn't like any of my system extensions. I was forced to do a restart and got the spinning wheel for about 30 minutes. Had to do a force quit and open in single user. Applejack wouldn't help at all, nothing. Had to then open cd drive through terminal just to get systems disk inside.
    Restarted from systems disk and tried a simple disk utility repair. System restarted fine but I noticed that I was then locked out of all of my additional internal drives, iDisk included (padlock shown on all drive icons excluding my Boot/Startup drive). Tried opening info on the various drives with apple i option and "permissions denied" popped up each time.
    I then took the step to restore from time machine. Set my restore selection to about 2 hours before I became an idiot. After it was finished I restarted the system hoping that would clear up my mistake but same thing, still locked out of all of my drives aside from boot/startup drive.
    All user accounts that I have added to the boot drive are still showing, I have yet to try and remove them... Figured I would ask for help before I messed it up any further. Spoke to apple care and they have advised me to do what I have done so far.
    Aside from an erase and instal, what steps should I take from this point? Will removing the added accounts clear up the issue?
    Also, any idea as to why I was refused permissions to begin with...?
    Thanks in advance and sorry for the book, just wanted to be as clear as possible.

    Force iPad into Recovery Mode. Follow step 1 to step 3 very closely.
    http://support.apple.com/kb/HT1808

  • Can I use additional internal HDD for my Satellite A200-1A9?

    Hello, new to these forums,
    I recently bought the A200-1A9 and I'm very pleased with it. I was interested in adding an additional internal HDD to the exisitng 120 GB one . I obviously didn't do enough research as I bought a Toshiba MK2035GSS: 2.5" HDD 200 GB thinking it would slot right in the spare slot and it doesn't.
    So really I'm looking for some advice on if I can add an extra internal drive and if so what model and how. After taking of the back slot cover there does look to be room for another drive although I'm not sure if the correct connections are there or maybe if the space is used for somthing else.
    Any help greatly appreciated.
    Thanks,
    Martin

    Hello Martin
    As far as I know some A200 models are delivered with 2 HDDs. because of that Toshiba make standard notebook chassis. All A200 models use this standard chassis. Your A200 is delivered with just one HDD and because of that place for second HDD is empty. This does not mean you can use second HDD.
    I have the same notebook as you and in my case there are no any HDD connectors prepared for second HDD.

  • Hi Guys,  I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

    Hi Guys,
    I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
    Alex

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Adding additional j2ee node

    Hello,
    we are running BI 7 - abap+java stacks with 16 GB ram (recently added)
    i would like to know what is the thumb rule for adding additional j2ee node?
    when is it neccassary to add additional j2ee node?
    Regards,
    Moshe

    Hi,
    The JLaunch starts a Java program. It loads the JVM into its own address space and then represents the required cluster element. The program can receive notification from the JControl process via named pipes to stop the cluster element, and terminates, if the JControl stops running (fork emulation under Windows).
    So Jlaunch consuming high CPU time means that server, dispatcher or bootstrap process consume it. If there are not enough system or application threads avaliable means that the engine must buffering requests for web application or system processes. Things to check in this case are:
    SAP NOTE 1016241 - J2EE Engine hangs because of unsufficient system threads
    SAP note: 716604  and upgrade JDK.
    SAP note: 723909 -> set correct VM parameters
    and if issue persists, then you will need to analyse the application causing teh leak...
    SAP note: 1259465: Memory analyser.
    Regards,
    Hemanth

  • In CJI5 Parked invoice value is added to Internal commitment

    Hi Experts,
    After the upgrade from 4.7 to 6.0. Parked invoice value is getting added to Internal Commitment in report CJI5. We do not want parked invoice value in internal commitment.
    Earlier Internal commitment did not had this value added.
    Please suggest the process how to handle this.
    Regards,
    SKA

    Please try by running program RKANBU01 and then CJEN

  • Adding Additional Columns in LOV,That column capturing values from function

    My requirement:
    Adding Additional Columns in LOV,That column values capturing values returned by function.....
    Give me the ides to achieve this...

    Hi Subramaniam,
    If your requirement is to call a Database function then please make use of the below code ,
    import java.sql.CallableStatement;
    import java.sql.SQLException;
    import oracle.apps.fnd.framework.server.OADBTransactionImpl;
    OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
    OADBTransactionImpl txn = (OADBTransactionImpl)oaapplicationmodule.getOADBTransaction();
    CallableStatement cs = txn.createCallableStatement ("begin :1 := xxpackageName.xxfunctionname(:2,:3); end;",-1);//Replace your function Name
    try
    cs.registerOutParameter(1, Types.VARCHAR);
    cs.setString(2,InputParam1); // InputParam1 is the name of variable captured from the OAF page and passed into function as input parameter
    cs.setString(3,InputParam2); //InputParam2 is the name of variable captured from the OAF page and passed into function as input parameter
    String outParamValue = null; // outParamValue will capture the value returned by function .
    cs.execute();
    outParamValue = cs.getString(1);
    catch(SQLException sqle)
    throw new RuntimeException(sqle);
    finally
    cs.close();
    Let me know if its not clear .
    Keerthi
    Edited by: keerthioaf on Nov 23, 2012 5:17 AM

  • FBL5N : Adding additional field PERNR  to layout

    Hi experts,
    I had added additional field PERNR - personnel number in FBL5N layout for displaying in output.
    I had added pernr- personnel number by following the path
    SPRO -> Financial accounting ( new ) -> accounts receivable and accounts payable-> customer accounts ->line items -> display line items -> define additional fields for line item dispaly
    here i added bseg - pernr
    after adding , in FBL5N layout the field is appearing , but it is displaying blank in output  .
    Is there any thing needs to be done to display additional field in output of FBL5N.
    kindly give me any suggestions.
    thanks & tregards,
    Raghul
    Edited by: Raghul Gandhi on Mar 23, 2010 9:30 AM

    Hi,
    FBL5N: customer line item display.
    BSEG-PERNR: personnel number.
    Under which circumstances should BSEG-PERNR contain a value if you create customer related postings?
    If there is no personnel number given during posting (why should it?)  the field added to the FBL5N-layout will be empty.
    Best regards, Christian

  • Adding additional tables to the extractor configuration

    Hi Experts,
    Can you please help me adding additional tables to the SAP extractor and to configure the field data in the orgstructure to show a flag against the position.
    Luke - I have tried using the option said by you from Application-wide Settings-->Data Centre --> Read SAP Table, it has properly save the added table, but not able to see it from SAP extractor configruation and not able to extract any data. Also, can you please guide me how to use the fields from this table (HRP1010) to write a small piece of logic to show a flag for a particualr position based on data.
    Thanks in advance,
    Purandhar

    Hi Purandhar,
    I have tried using the option said by you from Application-wide Settings-->Data Centre
    --> Read SAP Table, it has properly save the added table, but not able to see it from
    SAP extractor configruation and not able to extract any data.
    This has probably added a data element - I would check in the dataelementconfiguration folder in your build's .delta folder. IF so then you have the first step completed. Now you need to add the necessary configurations to use the data that comes through this data element.
    Go to your orgchart/hierarchy and navigate to Views. Here select your view (or your first view if this needs to be done for more than one view - if so you'll need to repeate these steps but not the step you already did in the Data Centre), and then click the + icon next to Design Details. Here you can add a new linked detail to your view detail. Simply give it a name, select the detail to link it to (usually the top level detail which is in blue), select a link field and then select your data element that was created in the Data Centre.
    Now if you try to add a section to your view inside the Design Details view designer you will see your new detail added. You can then select it and add fields from this detail.
    Also, can you please guide me how to use the fields from this table (HRP1010) to write
    a small piece of logic to show a flag for a particualr position based on data.
    Once you have been able to add the data in the views designer you will probably need to do some XML and XSL editing because you cannot edit XSL files in the AdminConsole and you will need to do this to get your icon/flag to show.
    First of all you need to create a new XSL file and put it into a folder in your .delta\root folder. For example, My_XSL_files. Here you need to write the code to render your flag based on your variable. You can find plenty of examples in all of the pre-existing XSL files. Then you need to copy PresentationResources.xml to .delta\root\XML and add the reference to your new XSL file.
    Go to your build's .delta folder and go to detailconfiguration. Find the detail you just created and open it. You'll find a section in their that you just added with a reference to an XSL file (e.g. if you added a Simple Caption section it will probably be something like SimpleCaptionXSL). Change this to the reference in the PresentationResources.xml.
    Load your build in the AdminConsole and hit Publish. Once done you should see your icon. Sometimes if your XSL is invalid or the code doesn't work you won't see anything. This is not unusual as the whole process can be quite tricky - even for us with lots of experience!
    Good luck!
    Luke

  • Do I use Airport as my main router or do I use it in addition to a router?

    So I am looking to improve my wireless signal in my house as well as find a better solution for Time Machine rather than using a portable HDD which I plug in now and again to backup.
    My question is this, Do I use an Airport to replace my router or do I use it in addition to my router?
    If it can be used in addition to could I place it say half way between my router and further point I would be from my main router so it doubles (Triples rather!) up as a wi-fi range booster?
    Summary of home setup: Main router in living room. In apartment with 3 main rooms. Playstation must be wired so router cannot move to a more central location but this means poor signal in bedroom for iPhones / Apple TV.
    Thanks!
    Ray

    There's nothing wrong with using a portable HDD to back up when it's convenient for you, and offer the advantage of being more easily transported than a Time Capsule. They're also inexpensive and disposable – features that enhance a comprehensive backup strategy. A Time Capsule is a fine product and I own several of them, but you can buy three 2 TB portable USB hard disk drives for the price of a single 2 TB TC.
    (Not that 2 TB is necessarily the best choice though - a smaller capacity may be more appropriate for your requirements.)
    Remember that portable Macs use "local snapshots" that are flushed to your Time Machine backup device when it becomes available. Plug it in when it's convenient for you. A Time Capsule is advantageous for those lacking the discipline to do that routinely.

  • Adding additional sld

    Hello,
    we have 1 sld  - configured on the portal dev -
    i would like to add additional sld - configure it on the portal production - all the production systems will be added to this sld, and all the qa and dev systems will remain on the sld opn the portal dev
    what are the specific pahses in adding additional sld , updating it if neccasary, and moving the relevent systems
    Regards,
    Moshe

    Hi
    The task could be done like this:
    1) Activate the SLD in the EP prod and configure post-processing accord. to SLD guide
    2) Ensure that the DEV-SLD and new PRD-SLD has the same CIM model version and SAP_CR version
    3) Export the content from DEV-SLD (export line ALL)
    4) Import this export into PRD-SLD
    5) Configure all production systems "SLD data provider" to send technical data to PRD-SLD
    6) Configure all production systems "SLD client role" to work with PRD-SLD
    ...now the DEV-SLD will only get technical data from the non-productions systems. If you want both SLD's to have a full view of alle systems then ALL systems could use PRD-SLD as target for their data suppliers and a sync from PRD-SLD to DEV-SLD can be set up... You maybe also need to supplement this strategy with manuel export/import of SLD content.
    BR
    Tom Bo

  • Adding additional dimensions in HFM

    Hi Experts,
    Need your advice.
    Present scenario: we have an HFM application which is pulling data from Peoplesoft transactional system. for the current application we have created 4 custom dimension and based on it all the mappings were done.
    Required:there is a requirement for adding additional custom dimension.
    i just want to know if it is possible to add additional custom dimension in the present application without affecting the previous data within the application.
    please advice the steps and the precautions to be taken.
    will such addition affect the previous period data?
    Thanks in advance.

    What version of HFM are you running?
    If you are at 11.1.2.2 (or higher I would imagine), then following link seems to provide some basic instructions on this process:
    http://blog.topdownconsulting.com/2015/01/adding-custom-dimensions-hfm/
    I would think about:
    (1) Is an additional dimension necessary - could you possibly split up an existing custom dimension (in the past, when only 4 custom dims were allowed, many times a dimension would serve dual purposes),
    (2) If you do decide to add a new dimension, this would be a major change that would effect all aspects of the application (data loading, reporting, historical data, consolidation rules, forms, grids, etc) - so, do you have a test system you could experiment with?  At the very least you would want to make a copy of the current app and convert the copy as a test,
    (3) probably you would want to do a thorough analysis of your consolidation rules before hand to see what the implications are of adding the new dim.

  • Improve Portal performance with BI-Java by adding additional server node.

    Hi SAP Expert
    I wonder anyone might have attempted this before,
    In an environment with BI-Java and Portal Java stack installed on the same server, is it possible to improve the system performance by adding additional portal server node? or is there any improvement seen by adding the extra server node?
    I am after suggestion and experience on how the portal performance can be improve, with consideration of BI-Java sharing Portal resources.
    Any comment will be most appreciated.

    Hi Jim,
    We've this configuration at our site, Portal and BI running together (not federated).  Recommendations would be to:
    1. Set a sensibly large max heap size on each server node of Portal (at least 2GB if not larger) and implement several nodes at least.  For example we have 4 x physical nodes, each running 3 server nodes of 2GB max heap size apiece so a total of 12 nodes.
    2. Implement the BI Safety Belt for large results sets (1127156)
    3. Implement the latest JVM / JDK you can on your environment.  We found much improved performance after implementing JDK SR10 with the J9/2.3 options enabled e.g.,  -Xjvm:j9vm23
    -Xsoftrefthreshold0
    4. Patch your BI components on the Portal (BIBASES, BIWEBAPP etc) to the latest available patch level for your Portal SP level
    5. Make sure all your RFC connections are load balanced to the backend and tuned for the kind of load you expect on your reports, and the BI is sized appropriately in terms of app servers and dialog work processes, RFC-enabled login groups in SMLG etc.
    6. Consult notes 1048691 (especially useful, opions &PROFILING=X&TRACE=X added to reports for example for performance tracing), 937697, 1021921, 948158 for information about problem analysis for this scenario
    7. Implement SAP Web Dispatcher for Portal to reduce load on static mime files
    8. Tune the Portal application.  There's plenty information on SDN related to Portal performance tuning.
    I hope this helps!
    Cheers,
    Marc

  • Added additional user. How do I configure password for this user?

    Have two different accounts. Second accound added but don't understand how to cinfigure password for this account.

    A bit confused by your query, so can you clarify a few points.
    re: added additional user
    You do not add additional users to Thunderbird, so I presume you mean you have tried to create another mail account for someone else in your own profile.
    You do not configure passwords for other peoples email addresses as that would be a privacy issue and only they should do it.
    Lets start at the begining.
    If more than one person is using a computer, they should have their own User Account which they access via a password they choose. This gives them their own desktop view and access to programs installed on computer, such as Thunderbird.
    Thunderbird will be available for them to use.
    When you run it for the first time in their User Account, it will create a Profile in their User Account.
    Thunderbird will also then ask you to create a mail account in that Profile.
    The details you enter will ask for Name. email address and a password.
    That password is the same password they use to access their email in their webmail account using a browser, so only they should know that password and they should not divulge it to anyone - however in some cases, eg: spouses, they may know each others password.
    You can choose whether Thunderbird remembers the password or not before creating the account, but the password would still be required to configure the mail account.
    This method means that no one can see that persons emails nor access their password details because they do not know the password to the computer User Account.
    If you have only the one admin User Account which several people use, then anyone has access to anything on that computer. This may be fine if eg; spouses share the computer, but it is not a practise that should be used in any other environment.
    If you have mail accounts created in the same Thunderbird profile, then all mail and passwords are freely available for anyone to see and this may not be desired.
    Some people use only the one User Account, but they have their own Profile created in Thunderbird.
    When Thunderbird was initially run, it created a defult Profile, but you can add additional Profiles using the Profile Manager.
    The mail account is created in that Profile and then they can apply a Master Password in Thunderbird.
    This means that anyone can still see anyone's emails as on startup as anyone can select any Profile.
    But, the access to passwords is locked and removal of Master Password will remove all stored paswords to safe guard privacy.
    Some info on Master Passwords:
    * http://kb.mozillazine.org/Master_password
    Some info on creating additional Profiles using Profile Manager:
    * http://kb.mozillazine.org/Profile_Manager

  • Adding Bluetooth internally to DV7-3165DX?

    What steps are involved with adding bluetooth internally to DV7-3165DX? What pitfalls should I avoid? Pics would help. As a measure of skill level, I have replaced hard drive and display (panel only) in same laptop. How difficult is it compared to these?
    I am looking at buying the following to add bluetooth internally to my DV7-3165DX, so this would free up 1 usb port from bluetooth nano. I have a lot of usb accessories. DV7-3167NR used the same motherboard, 574679-001, and parts for internal bluetooth.
    537921-001     Bluetooth SB module
    583501-001     Bluetooth module interface cable

    All you need to do is to buy a BlueTooth dongle, for about £10, which just plugs in to a USB port and you are BT activated. But unless it is the D-Link one that Apple recommends, it may not work with a headset, though it works OK syncing with and transferring files to and from a digital camera.

Maybe you are looking for