Adding additional spaces

Hey there.
I was wondering if there's a way to go beyond apples column limit in the spaces preferences pane. I'm aware that you can add up to 4 rows but I just don't like being disorientated in 2-dimensional space..
Perhaps someone could suggest a boolean option to add more columns?

there is no way to do that. I suggest you get oriented in 2d and hope they don't move to 3d spaces arrangement next

Similar Messages

Adding additional j2ee node

Hello,
we are running BI 7 - abap+java stacks with 16 GB ram (recently added)
i would like to know what is the thumb rule for adding additional j2ee node?
when is it neccassary to add additional j2ee node?
Regards,
Moshe

Hi,
The JLaunch starts a Java program. It loads the JVM into its own address space and then represents the required cluster element. The program can receive notification from the JControl process via named pipes to stop the cluster element, and terminates, if the JControl stops running (fork emulation under Windows).
So Jlaunch consuming high CPU time means that server, dispatcher or bootstrap process consume it. If there are not enough system or application threads avaliable means that the engine must buffering requests for web application or system processes. Things to check in this case are:
SAP NOTE 1016241 - J2EE Engine hangs because of unsufficient system threads
SAP note: 716604 and upgrade JDK.
SAP note: 723909 -> set correct VM parameters
and if issue persists, then you will need to analyse the application causing teh leak...
SAP note: 1259465: Memory analyser.
Regards,
Hemanth

I've bought additional space on iCloud. When it will be available on my phone?

I've bought additional space on iCloud. Money were taken form card. But it still shows 5Gb. When it will be available on my phone?

Hi MaryEva.todor,
Welcome to the Apple Support Communities!
I understand that you purchased iCloud storage and see the charges reflected on your card, but do not see the added storage on your account. In this situation, it may be necessary to contact iCloud Support to see what the issue is. Please use the link provided toward the bottom of the attached article.
Get help using iCloud storage - Apple Support
You might need to enter your credit card information again, then try to upgrade. You can't update your payment information or manage your storage from iCloud.com. If you still can't upgrade your storage, contact iCloud Support.
Best regards,
Joe

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account, transfer the photos back to your new primary account etc.

HT4933 i want to buy additional space for my i phone

i want to buy additional Space one year not for 1 month . can you help me ?

Additional iCloud storage is now charged on a monthly basis - once started it will debit your card automatically each month until cancelled. There is now no longer an annual payment option.
Just to clarify something which sometimes causes confusion - though likely enough you do understand this - the space you buy is on the iCloud server. It is no additional storage space on the phone.

Does an application have to know a "secret handshake" to be added to spaces

It seems that some applications can be added to Spaces' "Application Assignment"s, and some can't. For instance, there's no problem with adding Firefox, whereas DOSBox is silently ignored. You go through the dialog (started by pressing the "+" under the Spaces "Application Assignment" list), navigate to the executable for DOSBox (.../DOSBox.app), click "Add," and you're returned to the System Preferences, but the application is not added to the list!
I thought it might be the base directory in which the application is found, but copying the app to /Applications didn't make it work, either.
What's the magic? Is it buried in a plist or something?

You can assign properties to a MovieClip dynamically. Howvever this does not apply to all objects. For instance, you cannot do this for Sprites and SimpleButtons.
You should declare all variables/objects. If you are operating in strict AS3 mode, that line alone would throw errors for two reasons... neither game1 nor mcContainer is declared. When you are not working in strict mode, you can get away with sloppy coding. Try the following in a file that is set up for strict mode and see what you get...
var game1:MovieClip = new MovieClip();
mcContainer = addChild(game1);

Adding Additional Columns in LOV,That column capturing values from function

My requirement:
Adding Additional Columns in LOV,That column values capturing values returned by function.....
Give me the ides to achieve this...

Hi Subramaniam,
If your requirement is to call a Database function then please make use of the below code ,
import java.sql.CallableStatement;
import java.sql.SQLException;
import oracle.apps.fnd.framework.server.OADBTransactionImpl;
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OADBTransactionImpl txn = (OADBTransactionImpl)oaapplicationmodule.getOADBTransaction();
CallableStatement cs = txn.createCallableStatement ("begin :1 := xxpackageName.xxfunctionname(:2,:3); end;",-1);//Replace your function Name
try
cs.registerOutParameter(1, Types.VARCHAR);
cs.setString(2,InputParam1); // InputParam1 is the name of variable captured from the OAF page and passed into function as input parameter
cs.setString(3,InputParam2); //InputParam2 is the name of variable captured from the OAF page and passed into function as input parameter
String outParamValue = null; // outParamValue will capture the value returned by function .
cs.execute();
outParamValue = cs.getString(1);
catch(SQLException sqle)
throw new RuntimeException(sqle);
finally
cs.close();
Let me know if its not clear .
Keerthi
Edited by: keerthioaf on Nov 23, 2012 5:17 AM

FBL5N : Adding additional field PERNR to layout

Hi experts,
I had added additional field PERNR - personnel number in FBL5N layout for displaying in output.
I had added pernr- personnel number by following the path
SPRO -> Financial accounting ( new ) -> accounts receivable and accounts payable-> customer accounts ->line items -> display line items -> define additional fields for line item dispaly
here i added bseg - pernr
after adding , in FBL5N layout the field is appearing , but it is displaying blank in output .
Is there any thing needs to be done to display additional field in output of FBL5N.
kindly give me any suggestions.
thanks & tregards,
Raghul
Edited by: Raghul Gandhi on Mar 23, 2010 9:30 AM

Hi,
FBL5N: customer line item display.
BSEG-PERNR: personnel number.
Under which circumstances should BSEG-PERNR contain a value if you create customer related postings?
If there is no personnel number given during posting (why should it?) the field added to the FBL5N-layout will be empty.
Best regards, Christian

Adding additional tables to the extractor configuration

Hi Experts,
Can you please help me adding additional tables to the SAP extractor and to configure the field data in the orgstructure to show a flag against the position.
Luke - I have tried using the option said by you from Application-wide Settings-->Data Centre --> Read SAP Table, it has properly save the added table, but not able to see it from SAP extractor configruation and not able to extract any data. Also, can you please guide me how to use the fields from this table (HRP1010) to write a small piece of logic to show a flag for a particualr position based on data.
Thanks in advance,
Purandhar

Hi Purandhar,
I have tried using the option said by you from Application-wide Settings-->Data Centre
--> Read SAP Table, it has properly save the added table, but not able to see it from
SAP extractor configruation and not able to extract any data.
This has probably added a data element - I would check in the dataelementconfiguration folder in your build's .delta folder. IF so then you have the first step completed. Now you need to add the necessary configurations to use the data that comes through this data element.
Go to your orgchart/hierarchy and navigate to Views. Here select your view (or your first view if this needs to be done for more than one view - if so you'll need to repeate these steps but not the step you already did in the Data Centre), and then click the + icon next to Design Details. Here you can add a new linked detail to your view detail. Simply give it a name, select the detail to link it to (usually the top level detail which is in blue), select a link field and then select your data element that was created in the Data Centre.
Now if you try to add a section to your view inside the Design Details view designer you will see your new detail added. You can then select it and add fields from this detail.
Also, can you please guide me how to use the fields from this table (HRP1010) to write
a small piece of logic to show a flag for a particualr position based on data.
Once you have been able to add the data in the views designer you will probably need to do some XML and XSL editing because you cannot edit XSL files in the AdminConsole and you will need to do this to get your icon/flag to show.
First of all you need to create a new XSL file and put it into a folder in your .delta\root folder. For example, My_XSL_files. Here you need to write the code to render your flag based on your variable. You can find plenty of examples in all of the pre-existing XSL files. Then you need to copy PresentationResources.xml to .delta\root\XML and add the reference to your new XSL file.
Go to your build's .delta folder and go to detailconfiguration. Find the detail you just created and open it. You'll find a section in their that you just added with a reference to an XSL file (e.g. if you added a Simple Caption section it will probably be something like SimpleCaptionXSL). Change this to the reference in the PresentationResources.xml.
Load your build in the AdminConsole and hit Publish. Once done you should see your icon. Sometimes if your XSL is invalid or the code doesn't work you won't see anything. This is not unusual as the whole process can be quite tricky - even for us with lots of experience!
Good luck!
Luke

Need additional space to turn off legacy FileVault?

I have a 320GB HD but the finder says I have almost 500GB of data which is impossible. The about this mac tells me that I have 2GB free. I moved 100GB of items to the trash then emptied the trash and it still tells me I have 2GB free. I recently upgraded to lion and when I go to deactivate legacy filevault as I am guessing that is the issue it tells me I need additional space? How can I use an external HD to fix this issue? Can I just delete the sparsebundle that is 200GB?

Okay, I was under the impression that you had to deactivate any legacy/previous version of Filevault before you installed Lion. I don't believe that the two versions are in anyway compatible.
Do you have a backup of your prior SL volume?

Adding additional sld

Hello,
we have 1 sld - configured on the portal dev -
i would like to add additional sld - configure it on the portal production - all the production systems will be added to this sld, and all the qa and dev systems will remain on the sld opn the portal dev
what are the specific pahses in adding additional sld , updating it if neccasary, and moving the relevent systems
Regards,
Moshe

Hi
The task could be done like this:
1) Activate the SLD in the EP prod and configure post-processing accord. to SLD guide
2) Ensure that the DEV-SLD and new PRD-SLD has the same CIM model version and SAP_CR version
3) Export the content from DEV-SLD (export line ALL)
4) Import this export into PRD-SLD
5) Configure all production systems "SLD data provider" to send technical data to PRD-SLD
6) Configure all production systems "SLD client role" to work with PRD-SLD
...now the DEV-SLD will only get technical data from the non-productions systems. If you want both SLD's to have a full view of alle systems then ALL systems could use PRD-SLD as target for their data suppliers and a sync from PRD-SLD to DEV-SLD can be set up... You maybe also need to supplement this strategy with manuel export/import of SLD content.
BR
Tom Bo

Adding additional dimensions in HFM

Hi Experts,
Need your advice.
Present scenario: we have an HFM application which is pulling data from Peoplesoft transactional system. for the current application we have created 4 custom dimension and based on it all the mappings were done.
Required:there is a requirement for adding additional custom dimension.
i just want to know if it is possible to add additional custom dimension in the present application without affecting the previous data within the application.
please advice the steps and the precautions to be taken.
will such addition affect the previous period data?
Thanks in advance.

What version of HFM are you running?
If you are at 11.1.2.2 (or higher I would imagine), then following link seems to provide some basic instructions on this process:
http://blog.topdownconsulting.com/2015/01/adding-custom-dimensions-hfm/
I would think about:
(1) Is an additional dimension necessary - could you possibly split up an existing custom dimension (in the past, when only 4 custom dims were allowed, many times a dimension would serve dual purposes),
(2) If you do decide to add a new dimension, this would be a major change that would effect all aspects of the application (data loading, reporting, historical data, consolidation rules, forms, grids, etc) - so, do you have a test system you could experiment with? At the very least you would want to make a copy of the current app and convert the copy as a test,
(3) probably you would want to do a thorough analysis of your consolidation rules before hand to see what the implications are of adding the new dim.

Improve Portal performance with BI-Java by adding additional server node.

Hi SAP Expert
I wonder anyone might have attempted this before,
In an environment with BI-Java and Portal Java stack installed on the same server, is it possible to improve the system performance by adding additional portal server node? or is there any improvement seen by adding the extra server node?
I am after suggestion and experience on how the portal performance can be improve, with consideration of BI-Java sharing Portal resources.
Any comment will be most appreciated.

Hi Jim,
We've this configuration at our site, Portal and BI running together (not federated). Recommendations would be to:
1. Set a sensibly large max heap size on each server node of Portal (at least 2GB if not larger) and implement several nodes at least. For example we have 4 x physical nodes, each running 3 server nodes of 2GB max heap size apiece so a total of 12 nodes.
2. Implement the BI Safety Belt for large results sets (1127156)
3. Implement the latest JVM / JDK you can on your environment. We found much improved performance after implementing JDK SR10 with the J9/2.3 options enabled e.g., -Xjvm:j9vm23
-Xsoftrefthreshold0
4. Patch your BI components on the Portal (BIBASES, BIWEBAPP etc) to the latest available patch level for your Portal SP level
5. Make sure all your RFC connections are load balanced to the backend and tuned for the kind of load you expect on your reports, and the BI is sized appropriately in terms of app servers and dialog work processes, RFC-enabled login groups in SMLG etc.
6. Consult notes 1048691 (especially useful, opions &PROFILING=X&TRACE=X added to reports for example for performance tracing), 937697, 1021921, 948158 for information about problem analysis for this scenario
7. Implement SAP Web Dispatcher for Portal to reduce load on static mime files
8. Tune the Portal application. There's plenty information on SDN related to Portal performance tuning.
I hope this helps!
Cheers,
Marc

I keep getting an error code while trying to import a cd to my itunes: Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space. What does this mean?

I keep getting this error code while trying to import a cd to my itunes: "Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space." What does this mean?

Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
tt2

Adding additional spaces

Similar Messages

Maybe you are looking for