Adding Airport to my MacPro (1.Gen) - where are the airport antenna wires

Hello everyone! I´m quite desperate.
I just tried to install an airport card to my old Mac Pro but I just can´t find the antenna wires. I just found the BT wire but nothing else I could use to connect to the card itself!
I took out the hds (1+2) but I still can´t find them!
Where do I find those wires???
Message was edited by: zwoelfer
Message was edited by: zwoelfer

Well, once more: is it possible, that there are only two wires (labeled 1 and 2) or is there a third one (labeled 3)? I have one other wire named BT that is not in use.
I now connected #2 to the upper connector and #1 to the lower.
Now he finds the wlan but is slow like ****!
Could anyone help please??

Similar Messages

Where is the Airport Card in a 14-inch 1.42GHz iBook?

A friend of mine is having problems with the Airport card in her 14-inch 1.42GHz iBook. She thought it came unseated and asked me to check. I went to iFixit.com to see where it was located. I followed the guide and, lo and behold, there is no card under the keyboard!
Where is the Airport Extreme card in this model iBook? I am puzzled. HELP!

I do not believe that there is a regular AirPort Extreme card in that iBook.
Regardless it is considered "built-in" and not a user serviceable part on that iBook.

Setting up new ipad 2. Won't accept my PW for my Airport Extreme (Wi Fi network?) Where is the PW for my WiFi? I am stymied. Can I set up through My MacBook Pro, which IS connected to my WiFi network?

Setting up new ipad 2. Won't accept my PW for my Airport Extreme (Wi Fi network?) Where is the PW for my Wi Fi? I am stymied. Can I set up through my MacBook Pro, which IS connected to my WiFi network?

If you could provide the make and model number of the modem that the AirPort Extreme will be connecting to, we can likely tell you a bit more about what to expect in the way of getting the AirPort set up and working.
Unfortunately, "plug and play" does not apply here. You will need to set up and configure the AirPort Extreme using your iPad or iMac to name the AirPort as a device, assign a device password, name the wireless network, assign a device password and a few other things.
Once the AirPort Extreme is set up, you can connect the PC to one of the LAN <--> ports on the AirPort Extreme using an Etherent cable.
The iPad and iMac will connect to the wireless network that the AirPort Extreme provides.

Where is the airport utilities and assistant inmavericks

where is the airport utilities or the set up assistant in Maverick?

Unfortunately, AirPort Utility in Mavericks does not support the older versions of the AirPort routers.
You will need...or be able to borrow....a Mac running Leopard or Snow Leopard, or a PC with AirPort Utility installed, to be able to make any configuration changes to the AirPort.

Where are the print drivers found?

I have a Brother HL 2040 laser printer. THe Brother website has a version 2.2 driver for this printer. I downloaded and installed. When I add the printer I keep getting version 1.4 driver.
Can someone tell me where are the drivers found on my iMac?
Also I am trying to get this to print via a Linksys wireless print server. Do I use the ip address for the print server or the printer when adding this.
I tried using the print server IP but I get a "printer paused" issue. I think I need the new print driver.
thanks in advance for any help.

I have not gotten the driver to update to the newest version. I deleted the Brother Folders as mentioned in the replies, no joy. No matter what I do it ends up 1.4 not 2.0.
Version 1.4 worked OK for a USB connection, so I went forward with trying to get the network connection going. By trying every combination available I got it to work.
What HP jetdesk-socket has to do with my printer...escapes me. But that combination with version 1.4 driver works.
I will leave well enough alone.
I have 2 other computer to update to SL.....maybe.

HP Officejet Pro 8600 Wireless - Where are the printing shortcuts?????

HP Officejet Pro 8600 Wireless Printer
Windows 7
Where are the printing shortcuts?????
I just replaced a canon printer that died that had the concept of PROFILES, so that I could setup a PROFILE for each type of printing, i.e. 4X6 photos/documents/5X7 photos. So it was easy for our family to print, they would pick each setting.
Now with latest driver for 8600 there are NO way to save a set of settings for a printer. I have seen some old discussions on this but I just can't believe HP doesn't have this type of functionality in their drivers. I don't need the ePrint and all the other bogus stuff installed with the 8600 driver, but I DO NEED the ability to save different sets of printing options so I don't have to remember, borderless or not, landscape or not, etc and keep wasting photo paper/ink/regular paper with incorrect options.
Here is another posting with similar points -> Customers are NOT getting full print functionality. We don't care about the extra software, it is minimal. Full functionality includes the ability to create profiles for different printing situations so that the user can easily choose that profile (and therefore all the myriad settings for that profile). What HP has done is give us ONE profile, essentially, and every time you want to do something different, you have to change that ONE profile. How is that helping?
As I said, if I want to switch from a normal printing job (e-mail, web page, etc.) which uses my ONE setting, and then want to print a 4x6 photo, I have to remember to change at least 6 different settings. With the shortcut, I would select my "borderless photo" shortcut, and it would automatically switch paper trays, size, color, quality, you name it. Now you force me to change that each and every time.
If someone can explain why this is considered full functionality I would be extremely grateful.

Hello,
I am sorry you are having trouble with your print experience.
I am going to make some assumptions here, which could be wrong in your case, but might help others. Since you mention printing from Windows7 and ePrint in the same thread, can I assume you are trying to print using the HP ePrint driver for windows (www.hp.com/go/eprintsoftware) ? The ePrint driver also comes preinstalled on all HP laptops and pcs now, so maybe you made a recent pc purchase and therefore have the ePrint driver installed?
The goal of the ePrint windows driver currently has a lot less to do with providing the hundreds of print features and settings that the full featured, product specific print drivers provide. The goal is to enable customers to be able to print to any recent or new HP printer through a number of different connection paths from a single installed print driver / print queue. Once the ePrint driver is installed, printing with that driver will dynamically find direct network printers, cloud enabled printers, public print locations, direct wireless printers, etc., and create the correct print format depending on the print path taken. If the printer is ePrint cloud enabled and has a good internet connection, the printer and the pc do not have to be in the same location. For example, you can print from home to your printer at work. You can send photos of the kids to your mom's printer in another state, etc. The ePrint solution is also good for the traveling worker who just wants to send the occasional print job to the nearest network or wireless direct printer without having to find and install another print driver for each new printer. One driver, one queue and you can print to any recent or new HP printer.
The ePrint driver has a few important print settings that customers may want to use (copies, duplex, grayscale, etc). More may be added over time depending on demand.
BTW, because the ePrint driver does not have a ton of print settings to handle, the rendering of print jobs is as simple and efficient as possible and should not bog down your pc.
If you want all the bells and whistles in the print driver experience and just want to print to a single printer you can download and install the product specific print driver from hp.com
I hope that helps out a few people who may be wondering what the purpose of ePrint is!!
Good luck.
I am an HP employee, but these are my own thoughts and suggestions

Where are the buttons gone File upload and Download in New ABAP Editor

Where are the buttons gone of File upload and Download in New ABAP Editor in ECC 6.0.
Or some new utility added for this feature.
Kindly guide.
Thanks,
pradeep

Go to Utilities>more Utilities>upload/download is there.
Amresh.

Where are the emoticons in Mac Mail?

Where are the emoticons in Mac Mail 5.2 on OS 10.7.3?

I used colon parentheses with the smiley emoticon which is the normal code for a smiley. It works on this forum. I used to type these in all the time on Eudora so I'm familiar with the different combinations.
I added a space after it in the system preferences/language popup and sent myself another letter with it included and it still doesn't work in Mac mail (I added a space before and after it in MacMail). but it does work in TextEdit now.
Yes, "use symbol and text substution" is clicked.
The checkbox is ticked in the replace box; in the next box is the colon/parentheses with a space, and then the smiley in the next box.
Thanks for trying to help.

Where are the references for a Website in VS2012 stored?

Hi all,
I have a Visual Studio 2012 solution which contains a few Class library projects and an IIS website. I can add references to the projects, to the website (add reference > solution). But where are the references stored. If you add a reference to a project,
you can open the csproj file and see the path to the project. How can I see the same for a website (not a webapplication, but a website)
Sorry for the messy explanation, and thanks in advance.
Kind regards
Sincerely, Brecht

Hi Brecht,
As far as I know, when we create a website solution, the website project will saved to two places in default in
VS.
For example, when I create a website solution and then location the path like:
E:\WebSite1 in VS IDE.
One website.sln file is default save into the C:\Users\username\Documents\Visual Studio 2013\Projects\WebSite1\
WebSite.sln
In the WebSite1 folder, it includes some Class library projects you created and the website.sln file.
Another website project is saved into the E:\WebSite1 you located path.
So if you want to know find
the references’ store path for a Website in VS2012, I know that after you right click the website project ->Add-> Reference->Solution->Projects, the references will be added into the website.
And then you can right-click the website project->Build web site, the VS will create a Bin folder default to save the references. So you will see the references
in the Bin folder under the web site project. As the same time, it is default that you will find the references like the path: E:\WebSite5\Bin.
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SYSLOGD gone wild - where are the files?

Hey all,
Yesterday I had 15GB of free HD yesterday, it told me today that I was down to 100MB.
Confused - because I haven't added any files, I check the activity monitor and found that SYSLOGD was running, and using an absurd amount of processor and disc access.
I searched on it, and it seems to relate to Time Machine, which I'm not using.
SO... I rebooted, and now it's not running any more. BUT - the hard disc space is still gone, and I don't know where the files are that I need to delete to free it up.
I've loaded a disc scanning utility to try to find where a new 15GB file might be hiding, but I'm thinking it's in the hidden area of the disc.
QUESTION 1 : Where are the files SYSLOGD wrote and how can I delete them?
QUESTION 2: What made it run, and how can I keep it from happening again?
Thanks!

If you're looking for trash sounds, those are located in /System/Library/Components/CoreAudio.component/Contents/Resources/SystemSounds/ . If you're wanting to change the put stuff in trash and empty trash sounds, then follow these steps.
Convert your sounds to aif, save them in some convenient location.
Replace the two sound files *"move to trash"* and *"drag to trash"* inside the Finder and Dock folders, respectively, inside the SystemSounds folder, with the one you want for putting things in the trash and the *"empty trash*" one inside the Finder folder with the new one for emptying the trash.
Ensure that you rename the new ones the same as the originals. (I usually copy the originals and add a .bak suffix so I can restore the sounds to their original condition.)
OPTION-click the Finder's Dock icon and select Relaunch.
Do note that if you'll have to authenticate to copy, rename, and replace these files. I use the Terminal with the sudo command to affect the changes.

HT4796 Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

Hello. It looks like I recovered all my keywords attached to photos. What I did:
First I located all photos without keywords using a metadata search.
I found that it seemed to be certain groups of photos that had no keywords. I decided to at least get the main keyword on all of those in a particular group, like Canyonlands.
Once I added one of the keywords, the others all showed up magically! I then went to each group of photos and added the main keyword, and the others came along and attached to the photos.
Don't understand why this occurred or why it got fixed, since it was so random. But, I'm glad to have my keywords restored (I had divided flowers by color, etc. so it was a lot of work!)
Thanks for the discussion and help.

Where are the profiles stored for Profile Manager.

Where are the profiles stored for Profile Manager?
I created a profile attached to a user group and then made the mistake of removing the group without first deleting the profile.
Now the orphan profile can't be managed (it's no longer visible) and is still being pushed out to users.
The group I deleted had another group as it's members.
Example:
Active Sync User Group was a member of VPN Group.
VPN Group was deleted (it had the VPN settings payload)
Profile with VPN settings are still pushed out to Active Sync User Group even though VPN Group no longer exists.
I'm hoping I can manually remove this profile but I'm thinking it may be contained in Postgres. If that's the case I would appreciate any suggestions/methods to access the database to make modifications.
Thanks

The information/data for apps is stored together with the app in both the iPad and in the backup on your computer. When you drop a file in the file sharing section of apps it gets added to the backup and to the iPad. When you delete it it get deleted from the backup and from the iPad.

Where are the promised "over 700" fonts?

The Adobe email announcing file and font sync said,
We're happy to announce that you can now sync the files and folders you store in Creative Cloud directly to your desktop with the Creative Cloud desktop app. Also, your membership now includes access to over 700 fonts from Typekit, which can be quickly and easily synced to your computer. [emphasis added]
So I eagerly logged into my TypeKit account, via Creative Cloud, and when I filter down to only the fonts for desktop use, there are only 205!
So where are the other 500 fonts Adobe just advertised?

Here's the full message from Adobe:
We're happy to announce that you can now sync the files and folders you store in Creative Cloud directly to your desktop with the Creative Cloud desktop app. Also, your membership now includes access to over 700 fonts from Typekit, which can be quickly and easily synced to your computer.
Ready to begin? If you don’t already have the Creative Cloud desktop app, grab it from the Download Center—it’s free with your membership. If you already have it installed, just relaunch the app. Then go to the Files or Fonts panel to start syncing.
As you can see, it very clearly says "over 700 fonts from Typekit, which can be quickly and easily synced to your computer." And this couldn't be referring to just the TypeKit library because there were over 900 fonts in Typekit when this email went out.

Where are the Pick/Unpick/Reject Flags stored?

Hello all,
On LR4.0 I went through the process of creating a new catalog and importing the 3.6 cat with the proverbial error at the end of the update and have been working with that cat in LR4. I've added around 300 new images to that 4.0 cat and have done some Pick/Reject flagging as well as Star Ratings.
I've just moved to the LR4.1 RC1 and successfully upgraded my original LR3.6 catalog without any errors. Now I have added/synchronized my LR4.1 RC1 cat to add in place the folders of images I've added that have the Pick/Reject flags. I see the Star Ratings but not any of the Pick/Reject flags on those folders. I do see the flags on the images that were updated with the catalog though.
Where are the Pick/Unpick/Reject Flags stored? In the catalog only? In the sidecar XMP file? Both? Doing a Ctrl-S doesn't seem to make a difference.
Thanks in advance for any feedback.
Tony...

Catalog only.

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Adding Airport to my MacPro (1.Gen) - where are the airport antenna wires

Similar Messages

Maybe you are looking for