Adding alternative unit of measure field in Internal Goods/services link

Hi Experts,
I have a requirement to display an Alternative unit of measure in the Add Internal Goods and services link of ADD ITEM tab in Shopping Cart which comes when user clicks the product id hyperlink of  INTERNAL/GOODS AND SERVICES.The Alternative unit should be displayed beside the field Quantity unit .
If anyone has worked on this, Could you kindly help me out on how to proceed further ?
Thanks in advance,
umabalam.

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Similar Messages

  • Adding Alternative Unit of Measure to Outbound idoc

    Hi gurus,
    I need to add alternative unit of measure information to an outbound ORDERS idoc for each line item segment. How do I know what segments and qualifiers to use?
    Thanks!
    Will

    Hi  Will
    Unit of measure at item level is in
    Segment --> E1EDP01 : IDoc: Document Item General Data
    Field -->  MENEE : Unit of measure
    Do you want to convert the Unit of measure in outbound idoc?
    Use conversion rules for this...
    or
    do  you want send  Unit of measure  and secondary unit of measure ??
    extend the idoc type and write user exit to populate date in extended segment...
    i hope above info helps you
    Thanks
    RAMESH

  • Adding Alternative Unit of measure as part of  attributte of material

    Hi gurus,
    In our source system each material has alternative unit of measure which contain info on converting the base unit of measure (CAR) to MT and PAL.
    I need to add this info as part of material attribute
    e.g.
    Material "A" 10CART = 1 PAL & 100CART = 1MT
    This information captured in MM table "MARM" with material code as the
    As part of 0MATERIAL_ATTR , i need to have additional field that capture the info as below
    CARTPAL = 0.1 (1/10)
    CARTMT = 0.01 (1/100)
    Please help to advice on how to enhance the extractor to cater the above requirement.
    Your help highly appreciated
    Thank you

    hi,
    According to me you can enhance the 0Material_attr to bring the required information from ECC.
    But before enhancing anything ask func consultant or business below ques.
    1) will these unit entry will get created in MARM for any material at the creation of material or it will get updated later on
    2) will this unit value get change for any material during its entire life
    If any of above que ans is yes then how wud u manage in transaction data if unit get changed.
    For that u need to apply feedback concept in transaction dso.
    Regards,
    Ashish

  • COPA reports - Quantity in alternative Unit of Measure

    Hi all
       My clients requirement is to dispaly quantities in both base UoM and alternative UoM in COPA reports. Alternative unit of measure and the conversion factor is maintained in the additional data of material master. After reading through several forums and documentation, i understand that this can be achieved using COPA enhancement COPA0005.
    I am thinking of creating new value field to store the quantity in alternative UoM and to calculate the required quantity using the conversion factors in MARM table.
    But I have a few questions regading the same.
    1. There are 2 function modules EXIT_SAPLKEII_001 and EXIT_SAPLKEII_002. Which one should i be using for my purpose?
    2. Should enchanement COPA0003 be actived first to make COPA0005 active?
    3. Is any other configuration required apart from created in new value field for quantity in alternative UoM.
    Thanks
    Vamsi
    Edited by: VamsiM on Mar 17, 2011 7:21 PM

    Thanks Ajay for ur reply.
    When I created the quantity value field (say VVXXX), added it to Op. Concern and regenerated the structure; the system itself created the quantity unit field  VVXXX_ME for alt UoM. This field is also added to field catalougue and is also readily avialable for used in KE30. So I didn't have to create a new Characteristic.
    In my case, the alternative UoM is not the same and depends on the material.

  • No alternative unit of measure specified

    Hi,
    We are encountering no alternative unit of measure specified upon confirming the process order in COR6. What might be the problem. The base unit of measure is properly maintained in MM. Base unit of measure is Btl and the unit of issue is case.
    Hope you could help us.
    Thanks

    Hi
    In the confirmation screen, in the yeild  unit field is there. open the field there and check whether you units are displayed there or not. If they are not defined there then open the table and update your units there
    Krishna

  • Alternative unit of measure.. how in this scenario?

    Hi,
    KG is our base unit of measure
    and we would to use Littres(L) as the purchasing unit for this material.
    Therefore, we tried in system adding litres as alternative unit of measure.
    But we cannot figure out how to put in the density 0,87 kg/l as net weight only as gross weight.
    I have tried the below but system complained that "decimal places are not permitted"
    X----AUN-<=YBUnGrossWeight--NetWeight
    1-----L--<=-0,87--KG-0,87--
    1,000
    1,149-L--<=1--KG-0,87--
    1,000
    any clue?
    tjanks
    Tuff

    In purchasing view after defining alternative unit of measurement as L a POP up appears there you maintain as ,
    For ex:1kg-0.87L, then maintain such as 100 KG-87L.to avoide the decimal places.

  • MMR unit of measure field

    Hi All
    I wanted know how to enter the unit of measure field in material master record.
    This is the alternative unit of measurement.
    Santosh

    Hi,
      You can enter alternative unit of measure in the additional tab page of the material master.
      or you can enter in the sales unit the sales tab page , unit of issue in the field unit of issue and order unit in the order unit field.
    Regards,
    nandha

  • Basic Unit of Measure & Alternative Unit of Measure ?

    How to configure basic and alternative unit of measure(UOM) for a material ?
    If   KG - basic UOM
        Mtrs - Alternative UOM
    Here we procure material (GR, PO) with basic UOM, no prob with this system ill pick basic UOM automatically.
    and if we need to make GI with Alternative UOM ?
    How to configure the above scenario ?
    thankq

    Hi,
    As you procure material (GR, PO) with basic UOM(KG) and you want to make GI in Mtrs - Alternative UOM.
    Go to MM02 , enter your material{( you must have UOM(KG) } and select view of “General Plant data/Storage 1” and in  “unit of issue” field enter meter, then system will ask you to enter conversion factor  Mtrs  to KG. Enter your conversion factor and save.
    Now try ur transaction.
    Regards,
    Biju K

  • Mass upload of Alternative unit of measure using MASS

    Hi All,
    Can some one guide me how to upload alternative unit of measure using MASS Transaction -  can you elaborate like fields to be considered also, as I am trying using MM17 but could not go further.
    Thanks,
    Vengal Rao.

    it is possible to create alternative units using MM17. But I would not use the word upload in that matter, as you cannot upload from an external file.
    start MM17-
    select table MARM and execute
    you see 2 tabs,
    you are at the Change record tab, please set indicator for do not change existing data, then go to the creation tab
    enter the material number and the alternative unit you want add .
    then execute
    Now you see your material number, the new unit and the material description
    click the icon for field selection and add the field nominator and denominator (and all other fields where you usually enter data) to your shown fields.
    enter the value of your choice and save.
    if you want add the same value for nominator and denominator  to all the materials listed, then enter the value  in the fields that are listed above the listed materials. then click the header title above all fields that shall be distributed followed by the mass change button. Finally press save button.

  • LSMW - Alternative Unit of Measurement

    Hi,
    I'm dealing with something very very strange. 
    I'm trying to load the Alternative Unit of Measure for materials via a LSMW.
    I'm using the Standard Batch / Direct input Method
    Object               0020   Material master
    Method               0000
    Program Name         RMDATIND
    Program Type         D   Direct Input
    We need to have the conversion L & GAL and KG & LB.
    GAL & LB are loaded as first.  (This goes in very smoothly). These values are calculated with density.
    Afterwards I load L & KG. So I'm using the function DIMENSIONCHECK_CONVERTABLE to calculate the converted versions.
    So 90% loads like this, without any problem.  But 10% of it goes wrong... When I check try to load this manually with exactly the same number I calculated, I can save the material without any issue.  When I'm using the Job I get following issue: The alternative units of measure are inconsistent.
    How is this possible? And how can I solve this issue without doing it manually?
    Thanks!

    Hi Prasad
    In the Material Master - Sales org.1 view you have a field called Sales Unit.
    there you give the desired UOM and press Enter then you will get a pop up for Conv.factors:Unit of measure, here you have to give the Conversion of the Material UOM to Sales UOM.
    Ex. Material Measure is PC and Sales Measure is BOX
    You need to specify How many peacies will BOX consist of
    like 10 PC = 1 BOX like that you have to give in the Popup
    Regards
    Sree

  • Creation of Inspection lot in Alternative Unit of measure

    Dear Guru,
    Our implementation is going on in a Tube manufacturing company where Base Unit is maintain  in KG & 100 % visual inspection is taken place & we accept or reject tube on Pieces. So how can we do this in SAP, Because in SAP Inspection Lot is created on Base Unit & UD (Stock Movement) also in base unit, How can we in corporate Alternative Unit of measure.

    Hi,
          1. give unit of conversion in MM basic data (Unit of measurement) say 1 kg = 10 pieces
           2. add unit of issue as a Pieces in MM QM view
            3. add in inspection paln Unit of measure as Pieces ( if possible )
    Now during stock posting  post the stock KG  and now see in stock MMBE by changing the UOm as a pieces you will get the stock in pieces and you can now issue the material in pieces too.
    Experts pl guide if i am wrong anywhere

  • No alternative unit of measure specified, during creation  of sales order

    Dear Experts,
    when user is creating sales order, User is getting the error message no.  MM108  "No alternative unit of measure specified" for particular material.
    we have checked the alternative unit of measure it is already maintiained in the material master.
    we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
    can you provide  the exact reason and solution to over come this please  .
    Thanks in advance.
    Regards,
    Suresh Veerepalli

    Dear Experts,
    The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
    X                  AUn               Measuremt unit text           Y                   BUn               Measuremt unit text 
    1     L     l     <=>     1     L     l
    1.121     KG     kg     <=>     1.000     L     l
    1     PCE     Piece     <=>     1     L     l
    1     BDL     Bundle     <=>     12     L     l
    1     PAL     Pallet     <=>     720     L     l
    Error is gettting when creation of Sales Order ,Order is standard order.
    When we double click on error message  the following details are shown.
    1.No alternative unit of measure specified
    message no:MM108
    2.Diagnosis:
       This alternative unit of measure is missing.
    3.System response :
       The system cannot carry out conversion
    4.Prodedure:
      This is due to Program error that should not occur.
    Please provide the exact solution on this issuse.
    Thanks

  • Sales Information System (SIS) Reporting- Alternative Units of Measure

    Guys,
    Does anyone know how can we view SIS Reports (either using Standard or Flexible Analysis) in Alternative Units of Measure? Currently, all the quantities (example Order Quantity) are displayed in Base Unit of Measure .
    Thanks a Lot

    Hai john ,
          If i copy the mc.1 to make -Z report in this how can i view the stock in alternative units  as Kgs..But in master datas we maitained as BUM-Nos . For the same material master we are maitaining in additional datas as 1000 nos =40 kgs, if i take the report system will calculate the current stock with the AUM as kgs .for this pls suggest ie have 1000 nos stock if i choose AUM it should shows as 40 Kgs  .How to make program for calculating formulas.PLs  reply me asap
    Thanks in advance
    viswa

  • Alternative unit of Measure for variant material

    Dear All,
    Here is an interesting scenario,
    There is a naterial Billet with two variant characteristics length and size. and base unit of measure is TON. Now alternative unit of measure is PCS.  How can define the conversion factor on the basis of these two variant characteristics.
    In normal material (without variant char.)
    we can define conversion factor 1PCS= 2TON
    For variant material,
    For the material Billet with variant charc length and size how can i define conversion
    so that system calculates diff. PCS with diff. length and size but material is same. So how can i Do that.
    for example for same material Billet but variant char. Length is 6 M and size is 120*120 ,its wt will be 2 TON for 1 PCS.
    for the same material Billet with variant char. length 12 M and size 120*120, its wt will be 12TON for 1 PCS.
    How can i cater this for the same material.

    Hi Shoaib,
    We have faced the similar scenario for steel industry. Based on my experience, it is not possible to define variable values for Alternative UOM conversion with the variant characteristic/configuration, specially if you want SAP to maintain inventory with variable conversion rate.
    Use the Batch specific unit of measure for this situation.
    1) Create batch specific UOM i.e. Ton_per_pc (TOP) --- User proportional unit conversion
    2) Create batch characteristic ton_per_pc and assigned UOm.
    3) In material master additonal data select proportion unit and enter the standard conversion rate between ton & pcs.
    4) While doing GR - In batch creation you can enter whatever the conversion rate is and Inventory will be updated accordingly.
    Regards,
    Ravi.

  • Alternative unit of measure in BOM explosion report

    Dear gurus
    I want to get the alternative unit of measure along with the base unit of measure during the BOM explosion report in CS11.I tried with the layout but I cant find the same.
    How is this possible?
    regards
    kumar s

    Hi Kumar,
    You can develop  a Z report. In the standard CS11, the functionality of displaying the alternate UOM is not feasible.
    thanks and regards
    Muruegsan

Maybe you are looking for

  • Length error occured in IMPORT statement

    Hello everyone, i hv one requirment in PO print(ME23N). in po print asset no nt display without changing other format. so that i first copy both smartform and driver program, in that i made certain changes such that i declare the patameter p_ebeln an

  • Navigate from tree selection to parameterized report on same page

    I have a simple tree showing the departments and roles within our organization. I have a simple report showing the skills required for each node in the tree, sometimes general skills that apply to whole department, sometimes specialized skills for th

  • Can't get pdf to open in mac

    i am working from a vista machine, acrobat pro 9. my files can't be read in a mac? any solutions?

  • Horrible buzzing noise whilst on charge

    Hi all...not sure if anyone has had the same problem but when my Mac is plugged into charge and I have audio or video playing I have this awful buzzing noise in the back ground but when unplugged the audio is perfect - maybe there is some kind of ele

  • X1C i7 8GB Option Available for Order in US! [11/28/2012]

    But no touchscreen option... ... otherwise my order would be in... As the touchscreen option has been pulled from the list of "New Products", does anyone know if it has been cancelled or is this just marketing to first sell off the non-touchscreens?